Prusa LACK Enclosure Levelling Feet...Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES 9.2 KB...
3
29 hrs 3 pcs f 0.20 mm k 0.40 mm h PET 405 g d MK3/S Summary I needed a way to level my LACK enclosures and keep them anchored in place, and these feet were the answer. There are two versions of the feet to choose from: The floor version has a hole with a chamfered edge inside the socket that allows the foot to be screwed into the floor. The leg version has a hole with a chamfered edge outside the socket that allows the foot to be attached to the leg. For either version, you can insert the provided levelling plates in various thicknesses to individual feet to correct for uneven floors if necessary. 3D Printers > 3D Printers - Upgrades lack ikea enclosure diy fasteddy Prusa LACK Enclosure Levelling Feet VIEW IN BROWSER updated 14. 8. 2019 | published 14. 8. 2019
Transcript of Prusa LACK Enclosure Levelling Feet...Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES 9.2 KB...
29 hrs
3 pcs
f
0.20 mm
k
0.40 mm
h
PET
405 g
d
MK3/S
Summary
I needed a way to level my LACK enclosures and keep them anchored inplace, and these feet were the answer.
There are two versions of the feet to choose from:
The floor version has a hole with a chamfered edge inside the socket thatallows the foot to be screwed into the floor.
The leg version has a hole with a chamfered edge outside the socket thatallows the foot to be attached to the leg.
For either version, you can insert the provided levelling plates in variousthicknesses to individual feet to correct for uneven floors if necessary.
3D Printers > 3D Printers - Upgrades
lack ikea enclosure diy
fasteddy
Prusa LACKEnclosure LevellingFeet
VIEW IN BROWSER
updated 14. 8. 2019 | published 14. 8. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
9.6 MB
12.51 hrs f 0.20 mm k 0.40 mm h PET 184.00 g d MK3/S
updated 14. 8. 2019
9.6 MB
12.50 hrs f 0.20 mm k 0.40 mm h PET 184.00 g d MK3/S
updated 14. 8. 2019
10.4 MB
3.50 hrs f 0.20 mm k 0.40 mm h PET 37.00 g d MK3/S
updated 14. 8. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
9.2 KBupdated 14. 8. 2019
Gcode files are sliced for Prusament PETG on an MK3/S using the 0.20mmSPEED MK3 setting. I used 50% infill for the socket pieces, and 10% infill,2 bottom layers, 3 top layers and 3 perimeters for the plate parts.
3mf files have been provided for those who wants to do the slicingthemselves. The Fusion 360 source file is also available in the files section,and is heavily parameterized for easy tweaking/adjusting.
This remix is based on
Prusa Printer Enclosure V2 – with MMU2S support
by Ondřej Stříteský
socket_floor_02mm_petg_mk3s_12h31m.gcode
socket_leg_02mm_petg_mk3s_12h30m.gcode
levelling_plates_02mm_petg_mk3s_3h30m.gcode
socket_floor.3mf
9.2 KBupdated 14. 8. 2019
121.4 KBupdated 14. 8. 2019
134.6 KBupdated 14. 8. 2019
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
socket_leg.3mf
levelling_plates.3mf
prusa-lack-enclosure-levelling-feet.f3d
