Existing carriageway to remainKey:

Existing footway

Proposed build out in grey600x900mm artificial stone paving

Existing parking bay to remain

Proposed loading bay

Proposed tactile paving (red)

Existing disabled parking bay to remain

Proposed gully/outfall unit

New location of traffic signal

Proposed (tactile paving (buff)

Existing gully

Proposed linear drainage system

Existing paving to be renewed in grey600x900mm artificial stone paving

Proposed 'share use' feature

Existing waste bins to be relocated

Proposed tree in planter

Proposed granite kerbs(1000mm x 300mm x 200mm)

Proposed new seating

Proposed relocated parking bays

Indicative location for proposedlighting column

Existing loading/parking bay to remain

Cycle stands

Historical plaque insert

Proposed waste bins

CU

TLIN

E

Existing tactile paving to be realigned.Crossing arm to be added to right handside of tactile paving 1.2m wide

Existing pedestrian crossing including signals,tactiles and road markings to be moved outto accommodate proposed build-outs

Widen existing footwayWiden existing footway

KEEP

CLEAR

NO ENTRY

DISABLED DISABLED

Proposed over-run area forlarge vehicles turning out ofSalisbury Road

6.0m

6.0m

6.1m

Proposed 'shareduse' area

No loading in this areaMetropolitan seat with steel section

Rectangular seating block

CU

TLIN

E

Widen existing footwayWiden existing footwayExisting uncontrolled

crossing to be extended

Existing 'shared use'feature to be renewedand extended

Existing pedestrian crossingincluding signals, tactiles and roadmarkings to be moved out toaccommodate proposed build-outs

Existing parking bays tobe utilized as part timeloading bay

BUSSTOP

BUS STOP

DISABLED DISABLED

6.1m

6.0m

No loading in this area

No loading in this area

Rectangular seating block

Hoop cycle stand

Notes:1. The seating and cycle stand specification and

positions are indicative. Exact specification andlocations are to be agreed at detailed designstage

Design/Check DateRevision Details

REVISION

Rev.

Purpose of issue

Client:

Scheme title

Drawing title

Scale @ A1:

ApprovedCheckedDrawnDesign

Traffic and Development

London Borough of Barnet, Barnet House, 11th Floor Highways

1255 High Rd, Whetstone

London N20 0EJ

Rev.

For construction, maintenance, cleaning and demolition risk refer to the relevant method

statements and risk assessments related to this task for scheme Ref.

In addition to the hazard/risks normally associated with the types of work detailed on this

drawing take note of above. All works on this drawing will be carried out by a competent

contractor working to a provived appropiate method statement and risk assessment.

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION

Parking bays on Union Street &

Salisbury Road. Adjustment to

build-out start point, to

accommodate loading bays

This product includes mapping data licensed from Ordnance

Survey with the permission of the Controller of Her Majesty's

Stationery Office.

© Crown copyright and database right 2016. All rights reserved.

London Borough of Barnet. Licence No 100017674

CF/LS 07/09/17 P03

Additional build-out to the eastern

footway and adjustment of road

markings

CF/LS 01/10/17 P04

Various design additions

following meeting

20/11/2017

CF/LS04/01/17 P05

Chipping Barnet High Street

Regeneration

Proposed Option

BC/000888-01

BC/000888-01

GC2452-CAP-76-XX-DR-C-001

S2 - Suitible for Information

1:250

CF

Sept 17

HT

Sept 17

CF

Sept 17

LS

Sept 17

P05

DRAFT

18/01/2018

Create 4noparking bays onSalisbury Road