PROnUf,TS, - Harbor Homepagei CLIENT; IUUDO FHODUST$, lNC, Heport No.: $ 14:OI 268b Date: May 16,...
2
CLIHNT: NUDO PROnUf,TS, lNC" 1 500 Taylor Avenue $pringfietd, lL 62703 Dan Tavine Test fteport No: 914:O12685 Date: May 16, 2OO87 SAMPLE ID: DATE OF RFCEIPT: TESTING PERIOD: AUTHORIZATION: THST NEOUE$Tf;D: The Client submitted and identified the following test material as Nudo NCp Elements Panels, nominal 3mm thick. Entered into sGS usrc sample tracking system on May 12, 2oog. May 15, 2OOg Client's Purchase Order No. 327O8 Perform standard flame spread and smoke density developed classification tests on the sample supplied by the Client in accordance with ASTM Designation Eg4-02, "Standard Method of Test for Surface Burning Characteristics of nuit-oing Materials". The foregoing test procedure is comparabte to IJL 723, ANsl/NFpA l\io. 2sg, and UBC No. 8-1. TEST RESULTS: Flqnle $pread $mokp Developed OO For detailed results see page Z. Tested by Signed for and on behalf of ) .---) SGS U.S. Testing Company Inc. &r*We ---.2-r,E-4 f |tr-- r b.f rian Ortega Test Technician Supervisor Fire Teehnology This repon is issued bv SGS U's' Testing company Inc. under,a.tolHr:"la:l3,,on" ro,. Testins services {copy avaitablo on request}. scs u.s. Testing's responsibility under this report is limited to proven negligence and will in no case be more than the amount of the testing fees. Except by special affangement, samples are not retained by SGS U.S. Testing for more than 30 days. The results shown on this test report refer only to the sample{s} t6sted unless otherwiss stated, under the conditlons agreed upon. Anyone relying on this report should understand all of the details of the engagement' Neither the nam€, seals' marks nor insignia of 6es U.s. Testing mly be used in any advertising or promotional materials without the prior written approvat of SGS U.S. Testing. fhe t""t report cannot be reproduced, except in full. without prior written permission of SGS U,S. Testing Company Inc, f {g0g} 483"0330'..rdwxni.s$s.rfllrr :-:?w Greg Banas ky / i'l r*iiii;r i-,nr"ril;;ii',; i:;r: I Cnnsr,rrier TsstiftU Sen,ires fi3$5 l.fl/lrite ilak A,u,enue. fianchc f,urarnunga, [A Ei i3il t igr]gl i]83"t1?5il fu'lemhsr',:f the S$S *r'oLrp
Transcript of PROnUf,TS, - Harbor Homepagei CLIENT; IUUDO FHODUST$, lNC, Heport No.: $ 14:OI 268b Date: May 16,...
CLIHNT: NUDO PROnUf,TS, lNC"1 500 Taylor Avenue$pringfietd, lL 62703Dan Tavine
Test fteport No: 914:O12685 Date: May 16, 2OO87
SAMPLE ID:
DATE OF RFCEIPT:
TESTING PERIOD:
AUTHORIZATION:
THST NEOUE$Tf;D:
The Client submitted and identified the following test material as Nudo NCpElements Panels, nominal 3mm thick.
Entered into sGS usrc sample tracking system on May 12, 2oog.
May 15, 2OOg
Client's Purchase Order No. 327O8
Perform standard flame spread and smoke density developed classification tests onthe sample supplied by the Client in accordance with ASTM Designation Eg4-02,"Standard Method of Test for Surface Burning Characteristics of nuit-oing Materials".The foregoing test procedure is comparabte to IJL 723, ANsl/NFpA l\io. 2sg, andUBC No. 8-1.
TEST RESULTS: Flqnle $pread $mokp Developed
OOFor detailed results see page Z.
Tested by Signed for and on behalf of) .---) SGS U.S. Testing Company Inc.
&r*We ---.2-r,E-4f |tr-- r b.f
rian OrtegaTest Technician Supervisor Fire Teehnology
This repon is issued bv SGS U's' Testing company Inc. under,a.tolHr:"la:l3,,on" ro,. Testins services {copy avaitablo on request}. scs u.s.Testing's responsibility under this report is limited to proven negligence and will in no case be more than the amount of the testing fees. Exceptby special affangement, samples are not retained by SGS U.S. Testing for more than 30 days. The results shown on this test report refer only tothe sample{s} t6sted unless otherwiss stated, under the conditlons agreed upon. Anyone relying on this report should understand all of thedetails of the engagement' Neither the nam€, seals' marks nor insignia of 6es U.s. Testing mly be used in any advertising or promotionalmaterials without the prior written approvat of SGS U.S. Testing. fhe t""t report cannot be reproduced, except in full. without prior writtenpermission of SGS U,S. Testing Company Inc,
f {g0g} 483"0330'..rdwxni.s$s.rfllrr
:-:?wGreg Banas ky /
i'l r*iiii;r i-,nr"ril;;ii',; i:;r: I Cnnsr,rrier TsstiftU Sen,ires fi3$5 l.fl/lrite ilak A,u,enue. fianchc f,urarnunga, [A Ei i3il t igr]gl i]83"t1?5il
fu'lemhsr',:f the S$S *r'oLrp
i
CLIENT; IUUDO FHODUST$, lNC,
Heport No.: $ 14:OI 268bDate: May 16, 20087Page; 3 of 2
PREPARATION AND CONDITIONING: PREPARATION AND CONDIT|ONING: The sampte materiat wassubmitted in one piece, 22" wide by 24' long. The sarnple was supported by 1/4" round metal rodsplaced at two foot intervals across the width of the test chamber.
H S4 THST NATA SHHHT:
CLIENT: Nudq Froduct$, lns, DATH:9tr1 $lSF
SAMFtE: Nudq NSP Elsmentp Fanel* nsminal Smnn thipk
FLAME SPREAD:
IGNITION: Did not ignite
FLAIVIE FRONT: N/A
TllVfE TO MAXIMUM SPREAD: NIA
TEST DURATION: 1O mlnutes
CALCULATION: N{A
N/A : not appf icable
SUMMARY oF AsrM EB4 REsuLTs: Becau$e of theadjusted to the nearest figure divisible by F, smokefigure Civisible by 50.
possible variations in reproducibility, the results areDensity values over 2oo are rounded to the nearest
In ordtsr to obtain the Flame $pread Classification, the abovetable:ruFPA CLA$S UBG CLAS$ FrAMH SPHEAD
| 0 through ZFll 26 thnough 7Flll 76 through 2OO
BUILDING CODES GITED:'l . National Fine Protection
2. Uniform Building Code,
results should be compared to the following
Less than or equal to 4S0Less than or equal to 4F0Less than or equal to 4FO
AB
C
Association, ANSI/NFPA No. 1ol, "Life safety code", 1gg4 Edition.
1994 Edition, Chapter 8, lnterior Finishes, Sections gO1-907.
* * {F r# "lf"ll. * 1t
End of Report
