GeoMonday 2016.2 – nanoton - swarm bee location-awareness technology
Promo 2016.2
Transcript of Promo 2016.2
Promo 2016.2PRECISION HAND TOOL PROMOTION
Mic
ro
meters
124AZ
210 SCREW THREAD COMPARATOR MICROMETER• 60° conical anvil, spindle faces with 1/64" (0.4mm)
flats on the ends of the points• Extremely hard and stable one-piece spindle• Advanced sleeve design with staggered lines and
distinct figures for precise, easy readability• Balanced frame design for comfortable, accurate measuring
124 INSIDE MICROMETER• Insulated rods marked with length• Adjustable for length• 6-1/2" (165mm) long handle is available• Measuring rods are solid• Graduations: .001"
224 INTERCHANGEABLE ANVIL MICROMETERS• Suitable wrenches are furnished to make necessary adjustments• Combination ratchet and speeder for uniform pressure and
quicker adjustment• Advanced sleeve design with staggered lines and distinct figures for
precise and easy readability
220 MUL-T-ANVIL MICROMETERS• Handles a wide variety of measurements impossible to
obtain with regular micrometers• Rigid one-piece frame of drop forged steel• Extremely hard and stable one-piece spindle• Micro-lapped measuring faces
220XFL-1210AP
224AARLZ
Cat. No. EDP Range Screw Movement Spacing Collars Rods Sale Price124AZ 50542 2-8" 1/2" One 1/2" 6 247.95124DZ 50554 2-32" 1/2" and 1" (2 heads) Set 124A and 124C 779.95124MAZ 56141 50-200mm 13mm One 12mm 6 247.95124MDZ 56144 50-800mm 13mm and 25mm (2 heads) Comprised of set 124MA and 124MC 779.95
Cat. No. EDP Range Grad. Accuracy Sale Price210AP 50731 0-7/8 0.001 ±.002" 162.45
Cat. No. EDP Range Grad. Accuracy Sale Price220XFL-1 50746 0-1" .001" ±.0002" 260.30
Cat. No. EDP Range Grads. Standards* Sale Price224AARLZ 50770 0-4" .001" 1", 2", 3" 437.95224ARLZ 50772 2-6" .001" 2", 3", 4", 5" 481.65224.1BRLZ 72700 6-9" .001" 6", 7", 8" 639.35224.1GRLZ 72704 6-12" .001" 6", 7", 8", 9", 10", 11" 952.85224.1CRLZ 72701 9-12" .001" 9", 10", 11" 723.90224.1DRLZ 72702 12-16" .001" 12", 13", 14", 15" 897.75224.1ERLZ 72703 16-20" .001" 16", 17", 18", 19" 1,113.40224.1JRLZ 72705 20-24" .001" 20", 21", 22", 23" 1,311.95224MAARLZ 50771 0-100mm 0.01mm 25, 50, 75mm 491.15224MARLZ 50773 50-150mm 0.01mm 50, 75, 100, 125mm 496.85224.1MGRLZ 72708 150-300mm 0.01mm 150, 175, 200, 225, 250, 275mm 952.85224.1MDRLZ 72706 300-400mm 0.01mm 300, 325, 350, 375mm 914.85*Standards included
2 Prices effective June 1 - August 31, 2016 | Specifications subject to change.
Mic
ro
metersNew!430 INDICATING MICROMETER
• Retractable, quick release anvil for uniform, consistent, and fast measurement• Insulated frame to prevent thermal expansion/contraction• Balanced frame and thimble design for ease of use• Carbide measuring finish on anvils• Friction thimble• Satin chrome finish for rust and glare resistance• Spindle lock• Supplied with custom wooden case
New!T444 OUTSIDE MICROMETERS• No-glare satin chrome finish, which resists rust• Advanced sleeve design with staggered lines and
distinct figures for precise and easy readability• Balanced frame and thimble design to ensure easy
handling and better readability• Insulated frame for prevention of temperature related
expansion and contraction• Provides quick and easy adjustment• Reading in ten-thousandths of an inch (.0001") with
vernier scale on the sleeve
445 DEPTH MICROMETERS• Depths of holes, slots, shoulders and projections can
be measured to .001" (0.01mm)• Furnished with choices of 3" (75mm), 4" (100mm), and
6" bases and have 5/32" (4mm) diameter measuring rods• Combination ratchet and speeder for uniform pressure
and quicker adjustment• Ring-type lock nut for quick and sure locking
T444.1XRL-1
486 BLADE TYPE MICROMETERS• The blades are .030" (0.8mm) thick• Blades will measure to 5/16" (8mm) depths• Balanced frame and thimble design ensure easy handling and better readability• Speeder for quicker adjustment on all sizes
486P-1
Cat. No. EDPRange Resolution
Sale PriceMic. Indic. Mic. Indic.430XLZ-1 72533 0-1" ±.0020" .0001" .00005" 759.05
Cat. No. EDP Range Grads. Sale PriceT444.1XRL-1 52083 0-1" .0001" 98.80T444.1XRL-2 52084 1-2" .0001" 115.90T444.1XRL-3 52085 2-3" .0001" 128.25T444.1XRL-4 52086 3-4" .0001" 148.20T444.1XRL-5 52087 4-5" .0001" 160.55T444.1XRL-6 52088 5-6" .0001" 178.60
Cat. No. EDP Range Sale Price445AZ-3RL 52208 0-3" 242.25445AZ-6RL 52212 0-6" 292.60445AZ-9RL 52216 0-9" 361.95445AZ-12RL 67117 0-12" 486.40445BZ-3RL 52220 0-3" 260.30445BZ-6RL 52224 0-6" 305.90445BZ-9RL 52228 0-9" 381.90445BZ-12RL 67118 0-12" 506.35
445AZ-6RL
Cat. No. EDP Range Sale Price486P-1 52499 0-1" 397.10486P-2 52501 1-2" 410.40486P-3 52503 2-3" 420.85486P-4 52505 3-4" 444.60
430XLZ-1
3starrett.com
Mic
ro
meters
3732 ELECTRONIC MICROMETERSWithout Output• Balanced frame design for comfortable and accurate measuring• Large, easy-to-read, high-contrast LCD digital readout• No-glare black wrinkle finish on frame• Hard and stable one-piece friction thimble permits
one-hand operation of micrometer and uniform contact pressure
3206 OUTSIDE MICROMETER STAND• Converts outside micrometers to a sturdy bench gage for batch inspection of small parts• Useful as a handy bench vise or assembly fixture• Secure gripping surfaces• Ball joint construction allows head to be positioned as much as 30° off perpendicular in any direction• Positive lock on the base• Base Dimensions: 6-3/8" long x 3-1/2" wide x 3/4" thick (162mm long x
89mm wide x 19mm thick)• Tilting head clamping: 3/4" thick x 1" throat depth (19mm thick x 25mm
throat depth)• Accommodates all Starrett 1/2" (13mm) and 1" (25mm) outside
micrometers, 2 and 2A 2" Outside Micrometers and 210, 220, 483, 485, 569 Special Purpose Outside Micrometers
762 ELECTRONIC MICROMETER HEADS• Starrett satin chrome finish - no glare - resists rust on all reading surfaces• Extremely hard and stable one-piece spindle (the heart of our accuracy and long life)• Micro-lapped measuring face for flatness and squareness• Inch/millimeter conversion• PRESET button to install any reading at any position• Measurement HOLD button• RS232 data output port
3732XFL-1
3206
Cat. No. EDPRange
Sale Pricein mm762XFL 65058 0-1 0-25 415.15762XFL-2 65062 0-2 0-50 630.80762MEXFL-25 66077 0-1 0-25 415.15762MEXFL-50 66137 0-2 0-50 630.80
762XFL-2
Cat. No. EDP Range Resolution Accuracy Sale Price3732XFL-1 12268 0-1" 0.00005" ± 0.0001" 133.003732XFL-2 12269 1-2" 0.00005" ± 0.0001" 180.503732XFL-3 12270 2-3" 0.00005" ± 0.0001" 229.903732XFL-4 12271 3-4" 0.00005" ± 0.00015" 256.50
Cat. No. EDP Description Sale Price3206 68917 Outside micrometer stand 101.65
4 Prices effective June 1 - August 31, 2016 | Specifications subject to change.
Slid
e C
alip
ers
New!
New!
798 ELECTRONIC CALIPERS• IP67 level of protection against, coolant, dirt and dust• With and without output• Fine adjustment• Hardened stainless steel measuring surfaces• Large, easy-to-read, high contrast LCD digital readout
EC799 ELECTRONIC CALIPERS• Lightweight, ergonomic design• Inch/millimeter conversion reads .0005" or 0.01mm• Easy access to the single, long-life battery• Last measuring position retained when shut off• Hardened stainless steel body for long life• Find adjustment thumb wheel• Lock screw to hold the slide in position• Resolution: .0005" (0.01mm)• Zero at any position
3202 SLIDE CALIPERS• Provide quick accurate measurement of O.D. and depth• Sharp, clear dial graduations• Sharp, black graduations on satin finished bar• Hardened stainless steel• Lock screws for sliding jaw and dial bezel
798A-6/150
EC799A-6/150
Cat. No. EDP Range Resolution Output Sale Price798A-6/150 20798 6" .0005" 200.45798A-8/200 20799 8" .0005" 255.55798A-12/300 20800 12" .0005" 380.00798B-6/150 12521 6" .0005" x 240.35798B-8/200 12523 8" .0005" x 291.65798B-12/300 12525 12" .0005" x 433.20798BX-6/150 12782 0-6" .0005" x 338.20
Cat. No. EDP Range Output Sale PriceEC799A-6/150 00142 0-6" 148.20EC799A-8/200 00145 0-8" 209.00EC799A-12/300 00148 0-12" 312.55EC799B-6/150 00143 0-6" x 190.95EC799B-8/200 00146 0-8" x 252.70EC799B-12/300 00149 0-12" x 357.72
Cat. No. EDP Range Grads. Sale Price3202-6 61467 0-6" .001" 95.953202-8 61468 0-8" .001" 135.853202-12 61466 0-12" .001" 197.60
3202-6
5starrett.com
Depth a
nd
Heig
ht G
ages
3753A ELECTRONIC DEPTH GAGESWithout Output• Clear, easily-read number, properly sized for the tool• Hardened stainless steel body and slide for long life• Fine adjustment thumb roll for precision measurements• Lock to hold slide in position
3752 ELECTRONIC HEIGHT GAGE• Clear bar graduations in .100" and 5mm increments• Large .380" (9.65mm) easy-to-read LCD display - reads to .0005" or 0.01mm• Instant inch/millimeter conversion• Carrier and scriber designed to read from zero
3753B ELECTRONIC DEPTH GAGEWith Output• Hardened stainless steel bar for long life• Removable hook attachment for measurements from the edge of the slots, grooves, etc.• Lock to hold the slide in position• Fine adjustment thumb roll for precision measurements• Large, easy-to-read LCD, .310" character height• Induction type linear encoder system• Patented non-contact RS-232 data output• CR2032 3-volt battery (>year battery life under normal use)• In/mm conversion• Zero at any position
3753B-6/150
Cat. No. EDP Range Resolution Sale Price3752-12/300 68815 0-12" .0005" 782.803752-24/600 68816 0-24" .0005" 1,283.45
3753A-6/150
3752-12/300
Cat. No. EDP Range Resolution Accuracy Sale Price3753A-6/150 12258 0-6" .0005" ±.001" 275.503753A-8/200 12259 0-8" .0005" ±.001" 287.853753A-12/300 12260 0-12" .0005" ±.001" 348.65
Cat. No. EDP Range Description Sale Price
3753B-6/150 12690 0-6" Depth gage in case 343.90
6 Prices effective June 1 - August 31, 2016 | Specifications subject to change.
Ind
icato
rs
New!2900 ELECTRONIC INDICATORS• True Absolute Sensor Techology - remembers position and zero set point even during battery replacement.
Cannot be "over-sped" into failure.• Intuitive design and layout - easy to learn and use• Positive, tactile-feel button activiation• IP67 protection against dirt, dust, water and coolant to withstand hostile shop environments
New!3670 DIAL INDICATOR STANDS• Designed for comparison measurements using a dial indicator or digital indicator• Vertical fine adjustment is standard on all models• 8mm stem bushing included• Can be used with any AGD dial or digital indicator• Furnished with a serrated or flat anvil which is ground and lapped and removable
81 DIAL INDICATORS• Shockless, hardened steel gear train and jewel bearings• Furnished with a lug-on-center back• Anti-magnetic and special non-shock mechanisms are
options available for all models• Double row figure dials• Graduations: .001"
196 UNIVERSAL BACK PLUNGER DIAL INDICATORS• One of the most versatile indicators available• Accurate and reliable• Simple to operate• Range: .200" (5mm)• Graduations: .001" (0.02mm)
3671* Indicator not included.
Cat. No. EDP Dial Reading Range Sale Price81-111J 53378 0-5-0 .025" 237.5081-211J 53414 0-10 .025" 237.5081-136J 53392 0-15-0 .075" 162.4581-131J 53388 0-25-0 .125" 144.4081-231J 53420 0-50 .125" 144.4081-145J 53410 0-25-0 .125" 144.4081-141J 53400 0-50-0 .250" 144.4081-241J 53428 0-100 .250" 144.40
81-111J
Cat. No. EDP Reading Sale Price196A1Z 50697 0-100 236.55196B1 50699 0-100 135.85196A6Z 50701 0-100 275.50196B6 50702 0-100 176.70196A5Z 50714 0-50-0 236.55196B5 50717 0-50-0 137.75196MA1Z 65251 0-100 Yellow dial face 245.10196MB1 65252 0-100 Yellow dial face 158.65
Cat. No. EDP Description Sale Price3671 69901 Stand with round, flat anvil 498.753672 69902 Stand with round, serrated anvil 498.753673 69903 Stand with square, serrated anvil 498.75
196A1Z
2900-1
Cat. No. EDP Range Range Resolution Sale Price2900-1 09980 .5" .00005" ±.00012" 297.352900-4 09983 .5" .0005"/.0001"/.00005" ±.001" 381.902900-3-1 09963 1" .0005" ±.001" 268.852900-5-1 09967 1" .0005" ±.001" 381.902900-6-1 09969 1" .0005"/.0001"/.00005" ±.00012" 526.30
7starrett.com
Force Measurement +
Material Testing
L3 SYSTEMSStarrett L3 systems represent a new and easier solution for creating a test; performing a test; analyzing your test results; and managing test data.L3 Systems meet the requirements of today's research scientist, design engineer, quality manager or technician responsible for material characterization, verification and validation.
L2 PLUS SYSTEMSDesigned for advanced force measurement and analysis, L2 Plus systems are optimized for quality and engineering personnel. Test setup is intuitive, efficient and non-compromising.Like our L3 systems, L2 Plus measurements and analysis are performed graphically. Create high resolution graphs based on load, distance, height and time. Then measure any point or segment on your graph using a set of analysis tools.
Turnkey system solutions for material testing, force analysis and force measurement. Our systems distinguish themselves from the competition by making it easy to create and perform a test, and manage test results. We offer a full range of test frames, software, load cell sensors, test fixtures and more.
L2 SYSTEMSL2 systems operate using a Windows®-based table PC, load, distance and time-based results are displayed in a large format for easy interpretation. Graphical representation of each test can be displayed. Data tables display results with tolerance and statistical calculations. Standard reports are included, or export data for use with other applications.
S2 SYSTEMSS2 systems are ideal for high-volume production testing, quality control including incoming inspection verification and validation, and research and design engineering. Our simple, fill-in-the-blank test setups let you test and validate your springs in as few as three steps allowing your testing to be performed in seconds.
WATCH OUR INFORMATIONAL VIDEOS TO LEARN MORE ABOUT OUR FORCE AND MATERIAL TESTING SOFTWARE!
Bo
re G
ages
New!
New!
770 ELECTRONIC BORE GAGES• Larger and clearer LCD display• Updated electronics• Standard proximity output• Simple two button operation• 4 preset memories
84A DIAL BORE GAGES• Can be easily held to inspect bores and hole sizes without removing the workpiece• Adjustable range screw and two centralizing plungers are of hardened tool steel for wear and
spring-loaded for sensitivity• The housing and knurled handle are aluminum for light weight and good balance• Furnished in finished wood case
78XT BORE GAGES• Wide measurement range without changing anvils• Tungsten carbide measuring faces• Ratchet stop• Self-centering contacts• Blide bore measuring capability• Extensions available up to 6" (150mm)• Setting rings included• Furnished in a case, complete with setting ring, contacts, wrenches, and instructions
3089 DIAL BORE GAGES• All anvils laser marked for easy selection• Gage chart for quick and easy anvil selection• Includes sturdy aluminum case with cut outs
for gage and all accessories• Ergonomic design with non-slip
insulating grip• Resolution: .0005"
3089Z-131-715J770XTZ-1
Cat. No. EDP Range Bore Depth Sale Price84AZ-111-4J 00026 1-1/2"-3" 3" 1,028.8584AZ-111-5J 00027 3"-5-1/16" 6" 1,014.6084AZ-134-5J 00031 3"-5-1/16" 6" 976.6084AZ-111-6J 00028 5"-8" 6" 1,127.6584AZ-134-6J 00032 5"-8" 6" 1,026.0084AZ-111-7J 00029 8"-12-1/2" 7" 1,289.1584MAZ-161-4J 00034 3.175-76.2mm 75mm 1,071.6084MAZ-181-4J 00038 3.175-76.2mm 75mm 1,049.7584MAZ-161-5J 00035 76.2-128.58mm 150mm 1,023.15
Cat. No. EDP Range Accuracy Sale Price78XTZ-100 68124 .080"-.100" .00010" 1,661.5578XTZ-312 68129 1/4"-5/16" .00015" 693.5078XTZ-375 68130 5/16"-3/8" .00015" 653.6078XTZ-500 68131 3/8"-1/2" .00015" 657.4078XTZ-625 68132 1/2"-5/8" .00015" 619.4078XTZ-750 68133 5/8"-3/4" .00015" 638.4078XTZ-1 68134 3/4"-1" .00015" 720.1078XTZ-138 67674 1"-1-3/8" .00015" 997.5078XTZ-2 67675 1-3/8"-2" .00020" 1,018.4078XTZ-258 67676 2"-2-5/8" .00020" 1,251.1578XTZ-5 67679 4"-5" .00025" 1,729.0078XTZ-8 67682 7"-8" .00030" 3,688.8578XTZ-9 67857 8"-9" .00030" 3,751.55
Cat. No. EDP Range Sale Price770XTZ-1 72603 3/4 - 1" 2,220.15
Cat. No. EDP Range Sale Price3089Z-131-1424J 12457 1.4"-2.4" 229.903089Z-131-26J 12458 2"-6" 256.50
84AZ-111-5J
78XTZ-100
10 Prices effective June 1 - August 31, 2016 | Specifications subject to change.
Data
Co
llectio
n
DATASURE® WIRELESS DATA COLLECTION
DataSure® Facts• DataSure® Wireless Data Collection consists of three primary components:• Miniature radios (End Nodes) attached to the data output port of an electronic tool• A Gateway that connects to a PC• Routers extend the system's range and make the network more robust
A Comprehensive, Robust Solution• Works in almost any environment• Maintains data integrity in electronically noisy shops• Data receipt confirmation signal• DataSure® stores several readings• DataSure® adapts to all major electronic measuring tools• "IT" friendly and easily installs on a standard PC
Cat. No. EDP Description Sale Price1500-2-N 12059 Router, 916 MHZ, 120/240 VAC 961.401500-3A-1N 12530 End Node - Starrett Opto. 588.051500-3A-2N 12531 End Node - Starrett IP67 Micrometer 588.051500-3A-3N 12532 End Node - Starrett 3rd Generation 588.051500-3A-4N 12533 End Node - Starrett 2700 Indicator 588.051500-3A-5N 12534 End Node - Starrett 2000/2001/3752 588.051500-3A-6N 12535 End Node - Mitutoyo 6-Pin 621.301500-3A-7N 12536 End Node - Mitutoyo without Absolute Encoder 610.851500-3A-8N 12537 End Node - RS232, Jumpered Port Pins 588.051500-3A-9N 12538 End Node - Mitutoyo IP66 Micrometer 643.151500-3A-10N 12539 End Node - Mitutoyo IP65 Micrometer 643.151500-3A-11N 12540 End Node - Digimatic WD/SUB 9 Pin 588.051500-3A-12N 12541 End Node - Universal 10 Pin Connector 588.051500-3A-13N 12542 End Node - Absolute Digimatic Indicator 613.701500-3A-14N 12543 End Node - Mahr Federal UMAXUM Indicator 588.051500-3A-15N 12544 End Node - Opto/Duplex 588.051500-3A-16N 12545 End Node - Mahr Federal EX 588.051500-3A-18N 12565 End Node - Starrett IP67 Caliper 588.051500-3A-21N 00046 End Node - Starrett 2900 Indicator 588.05
11starrett.com
Ga
ge A
mps a
nd
Testers New!SR160 SURFACE ROUGHNESS TESTER
• Bluetooth Technology - Quick, reliable communication between traverse and display/control unit
• Tactile measurement button• Detailed graph of measurement area• Charge and transfer data through PC connection, main
charger and standard USB charger included• Two-piece, breakaway construction for remote readings
3811A COMPACT HARDNESS TESTER• Combines fast test speeds coupled with ample memory
and output• Performs tests that easily convert to most popular hardness
scales such as Rockwell, Brinell, Vickers and Shore• Designed to test the hardness of large, hard metal parts• USB output• Automatic conversions to Rockwell, Brinell, Vicker and Shore• Automatic mean value as well as Min. and Max. values
3812 ULTRASONIC THICKNESS GAGE• Menu-driven, multi-functional tester with basic
measurement capabilities• Measures the thickness of metallic and non-metallic
materials such as aluminum, titanium, plastics, ceramics and glass
• Accurately display readings in inch or millimeter• Ideal for measuring a wall thickness that would be
difficult to gage with conventional hand tools
3814 ANALOG BENCH HARDNESS TESTER• Ability to hand Rockwell Scales A through H and K• Stable cast iron construction• Ideal basic hardness testing for many typical applications• Easy to use
3811A
3812
SR160
Cat. No. EDP Sale PriceSR160 72584 1,852.50
Cat. No. EDP Sale Price3811A 69881 1,826.85
Cat. No. EDP Sale Price3812 67668 1,149.50
Cat. No. EDP Sale Price3814 67754 2,733.15
3814
12 Prices effective June 1 - August 31, 2016 | Specifications subject to change.
Sq
ua
res, Ru
les, pro
tra
cto
rs a
nd
Ca
lip
res
79 "YANKEE" SPRING-TYPE CALIPERS• Made from a high steel and well finished• The bow spring, although flexible, is exceedingly strong
to assure reliability• All sizes are available with either spring nut or solid nut• The quick-adjusting, automatic-closing spring nut is
designed for making fast, positive adjustments
C604R PRECISION RULES• Spring-tempered• Satin chrome finish• Quick reading• Rules with double row of inch figures, and each edge
represents the bottom edge reading left to right (rules 1" and wider)
C493 PROTRACTOR AND DEPTH GAGE• Angular measurement is from 0-180° in opposite
directions allowing the direct reading of angles and supplementary angles
• Depths are measured from a 6" (150mm) blade• Both tools have a flat surface on the back of the head
premitting laying the tool flat on paper or work• No-glare satin chrome finish
3020 TOOLMAKERS' SQUARE• This high quality toolmakers' square is not graduated
and offers squareness accuracy to .0002" (0.05mm) for every 6"
• They feature hardened, ground and lapped stainless steel construction on both blade and beam
• Fitted case
79B-6
Cat. No. EDP Length Sale PriceC604R-2 56465 6" 18.53C604R-4 56467 4" 20.90C604R-6 52678 6" 22.80C604R-12 52679 12" 38.48C604R-18 52680 18" 74.10C604R-24 52681 24" 96.90
Cat. No. EDP Blade Graduations Sale PriceC493 52532 32nds, 64ths 76.95C493B 52534 32nds, 64ths 77.90
Cat. No. EDPRange
Sale Pricein mm79B-6 50367 6 150 53.2079B-8 50369 8 200 79.8079B-12 50373 12 300 85.50
Cat. No. EDPLength of Blade* Length of Beam
Sale Pricein mm in mm3020-3 12225 2-31/32 75 1-31/32 50 72.203020-4 12226 3-31/32 100 2-31/32 75 91.203020-6 12227 5-29/32 150 3-29/32 100 133.003020-12 12228 12-1/32 300 6-7/8 175 272.65*Length of blade from the inner edge of the beam to the end of the blade.
3020-3
C604R-24
C493
13starrett.com
Precis
ion
Sho
p T
oo
ls
S830 SMALL HOLE GAGES• Hardened-ball measuring surface with two-point contact• Smooth, sensitive adjustment for better feel, giving
more accurate measurements• The adjustment of the gage beyond their range is
restricted by a safety stop that prevents breakage
185 TIME SAVER® TAP AND DRILL GAGE• Correct sizing of tap drill for any common size machine
screw in "NF" National Fine or "NC" National Coarse Thread Series
• Leaves the right amount of stock for approximately 65% full thread
• Shows correct drill body size• 60 holes with number sizes and
decimal equivalents• Hardened tool steel construction
186 DRILL AND STEEL WIRE GAGE• Widely used by mechanics for twist
drills and drill rod• Similar to the 185, without the tap and
drill information• 60 holes from 1 to 60• Marked with number sizes and
decimal equivalents• Hardened tool steel construction
167 RADIUS GAGE• Made of satin finish stainless steel - rust and stain resistant• Each gage is clearly marked with its radius• Each gage has five different gaging surfaces for both convex and concave radii• All gages have precision finished raddi wtih extra smooth, accurate edges
S831 SMALL HOLE GAGES• Hardened-ball measuring surface with two-point contact• Smooth, sensitive adjustment for better feel, giving
more accurate measurements• The adjustment of the gage beyond their range is
restricted by a safety stop that prevents breakage
Cat. No. EDP Description Sale PriceS830FZ 53081 Set of 5 in case 210.90
Cat. No. EDP Description Sale PriceS831EZ 53087 Set of 4 in case 161.50
Cat. No. EDP Range Gages Sale PriceS167CZ 50618 1/32"-17/64"; 9/32"-1/2" 24 141.55S167CHZ 50619 1/64"-17/64"; 9/32"-1/2" 25 172.90S167DZ 50620 1/32"-1/2" 16 100.70S167MCZ 55820 1-7mm; 8-15mm 21 147.25S167MCHZ 55821 0.5-7mm; 8-15mm 22 176.70SD167GZ 63433 .010-.025mm; .030-.100mm 26 201.40SD167GHZ 63463 .120-.300mm; .350-.500mm 26 220.40
S830FZ S831EZ
S167CZ
Cat. No. EDP Sale Price185 50675 67.45
185186
Cat. No. EDP Sale Price186 50676 64.60
14 Prices effective June 1 - August 31, 2016 | Specifications subject to change.
Fix
ed
Ga
ge S
ta
nd
ard
s
473 SCREW PITCH GAGE• Consists of a substantial steel case wtih a number of folding
leaves at both ends, each leaf having teeth corresponding to a definate pitch, marked on each leaf
• Positive stop design at both ends of the cse in position for use• Leaves have special narrow design, permitting checking
internal threads in nuts, etc., as well as external threads
474 SCREW PITCH GAGE• Consists of a substantial steel case with a number of folding leaves at both
ends, each leaf having teeth corresponding to a definite pitch, marked on each leaf
• Features a locking device at both ends of the case, so leaves can be securely locked in position for use
• Leaves have a special narrow design, permitting checking internal threads in nuts, etc., as well as external threads 474
473
187 JOBBERS' DRILL GAGE• Quick sizing of any twist drill from
1/16"-1/2" by 64ths• 29 holes marked with drill size
inches and decimal equivalents• Rigidly tested after hardening• Black matte finish with gage
information steel stamped on one side and white marked on reverse side for quick, clear reading
472 SCREW PITCH GAGE• Consists of a substantial steel with a number of folding leaves at both ends,
each leaf having teeth corresponding to a definite pitch, marked on each leaf• Locking device at both ends of the case, so leaves can be securely locked in
position for use• Leaves have a special narrow design, permitting checking internal threads in
nuts, etc. as well as external threads
C391 CENTER GAGE• Extremely handy for use in grinding and setting screw
cutting tools• Meet American National or U.S. 60°, Whitworth or
English 55°, and Metric 60° standards• Very useful for finding number of threads per inch through
graduations in 14ths, 20ths, and 32nds of an inch• Table of double depths of threads determining size of
tap drills• Made of spring-tempered
steel with satin chrome finish• Ground gaging surfaces
187
Cat. No. EDP Sale Price187 50677 63.65
Cat. No. EDP Description Sale PriceC391 51475 American Unified National Standard, 60° 22.80
Cat. No. EDP Description Sale Price472 52484 With locking device and 11-1/2 and 27 pipe thread pitches 76.00
C391
472
Cat. No. EDP Description Sale Price473 52485 With positive stop and 11-1/2 and 27 pipe thread pitches 380.00
Cat. No. EDP Description Sale Price474 52486 With locking device and 11-1/2 and 27 pipe thread pitches 380.00
15starrett.com
PROMO 2016.2
Promo 2016.2 04/16 50M/Q The L.S. Starrett Company 2016© Specifications subject to change.Promotion valid through June 1 - August 31, 2016.starrett.com
THE L.S. STARRETT COMPANY - CORPORATE HEADQUARTERSPhone: (978) 249-3551 | Fax: (978) 249-8495121 Crescent Street - Athol, MA 01331 - USA