PROFESSIONAL & AFTERMARKET SERIES - tcag.com.autcag.com.au/documents/Cruise Control 2017.pdf ·...
7
PROFESSIONAL & AFTERMARKET SERIES CRUISE CONTROL SPEED LIMITING SPEED ALERT Vacuum Actuator Electric Actuator Drive-By-Wire Canbus Ph: 02 8853 2900 [email protected] 103
Transcript of PROFESSIONAL & AFTERMARKET SERIES - tcag.com.autcag.com.au/documents/Cruise Control 2017.pdf ·...
PROFESSIONAL & AFTERMARKET SERIES
CRUISE CONTROLSPEED LIMITINGSPEED ALERT
Vacuum ActuatorElectric ActuatorDrive-By-WireCanbus
Ph: 02 8853 2900 [email protected]
103
AN INTRODUCTION TO THE COMMAND CRUISE CONTROL
The Command Auto Group has distributed Cruise Controls to Australian consumers and Professional Installers for over 30 years. Should you require sales or technical information, we offer full technical support from our head office at Castle Hill in Sydney, and operate a branch office in Perth.
Command Cruise Controls are manufactured to the highest quality standards by Lite-On Automotive Corporation, part of the Lite-On Group which has worldwide sales exceeding 5 Billion US Dollars. Lite-On Group are recognised world leaders in the manufacture of automotive and consumer electronics including computer peripherals and semiconductors, and achieved various ISO and TS manufacturing standards recognition. All Cruise Control models have been independently tested in Europe by TUV, and meet the latest European Directives for automotive accessories.
The Command Auto Group is the leader in innovation of Drive By Wire Cruise Controls, with features including Speed Alert and Speed Limiting. A national network ensures direct contact with qualified and dealer installation technicians, extended warranty to match new car warranty if fitment is at the time of vehicle purchase by an approved Command Cruise Control™ professional fitter, and completed warranty registration is received. Command Cruise Controls are regularly updated to utilise the latest technology improvements, and incorporate a variety of electronic “fail-safe” functions to ensure safe, reliable operation.
As a Command Cruise Control customer, you are assured of our ongoing commitment to product quality, support and service.
DEALER/INSTALLER SUPPORT
The Command Auto Group offers Dealers and Professional Installers full sales and product support through our Technical Services Division. We can assist you with:
• Information regarding recommended model fitment to most vehicles.• Telephone support for installation issues.• Full in-house diagnostic capability to test individual components.• Service / Repair capability with prompt turn-around times.• Comprehensive inventory of most replacement parts, including models which have been out of production for several years.• Point-of-sale product brochures.• Access to our vehicle database which contains speed-signal information for most vehicles and is updated bi-monthly to include new release vehicles.
FEATURES AND BENEFITS
Every model Command Cruise Control in the Professional Series has been designed to be easy-to-use, and promote safety and driver comfort.
Features include -
• SET (at current road speed)• RESUME (at last set speed)• ACC and DEC (for minor speed increase/decrease while engaged) • Immediate brake disengage• Immediate clutch disengage (on manual vehicles fitted with optional clutch switch)• Latest software design constantly monitors road speed and adjusts accordingly.
The driver of a vehicle fitted with a Command Cruise Control will appreciate several benefits including:
• Safer driving due to the driver being free to concentrate on road conditions rather than constantly monitor speed.• Protection against a substantial speeding fine and loss of license points through unintentional speeding.• In many cases, a more relaxed journey as the Cruise Control constantly maintains the set speed.• Improved fuel economy as throttle adjustments are minimal.• A more comfortable trip, particularly on a long journey.
Many vehicles utilise electronic technology to promote safety and driver comfort, such as ABS braking systems, traction control, electronic transmission control and satellite navigation to name just a few. Fitting a Command Cruise Control employs the same technology to provide a safer, more relaxed, and possibly less expensive journey.
Ph: 02 8853 2900 [email protected]
105104
AP60B – VACUUM ACTUATOR CRUISE CONTROL KIT
Supplied as a complete kit with a pad switch which mounts on the dashboard area of the vehicle.
This is an entry level product designed for installation by the Do it Yourself (DIY) vehicle owner, or installation by a Professional installer or Auto Electrician. Command Auto Group can recommend professional installers from our Australia Wide Preferred Dealer Network.
This model reads a speed signal from magnets included standard in the kit, or from an optional Speed Pulse Generator (subject to vehicle suitability).
Designed for older vehicles with no electronic speed signal, although the product is suitable for most new vehicle applications where mimimal cost may be a requirement.
Calibration is factory pre-set, with a minor adjustment for some vehicle types (i.e. 4WD or Commercial types), which can be made easily on the electronic module. Limited Cruise Control sensitivity is possible to suit the vehicle or driver’s requirements.
Suitable for most Australian and imported vehicles including four wheel drives and light commercials.
An optional clutch switch is recommended for vehicles with manual transmissions, and an optional vacuum tank is available for vehicles with marginal manifold vacuum, such as turbo-charged petrol vehicles.
AP307 – VACUUM ACTUATOR CRUISE CONTROL KIT
Suitable for installation by a Professional Installer or Dealership Technician.
The AP307 will read electronic speed signal from an electronic gearbox transducer, reed-switch speedometer, or ECU.
Calibration to vehicle PPM range is achieved by “on-road calibration” while driving the vehicle. Vehicle PPM rate does not need to be verified.
Cruise Control sensitivity and rate of initial engagement may be individually adjusted while driving the vehicle to suit the driver’s requirements.
Suitable for most Australian and imported vehicles including four wheel drives, light commercials with traditional throttle system.
An optional clutch switch is recommended for vehicles with manual transmissions.
An optional vacuum tank is available for vehicles with marginal manifold vacuum, such as turbo-charged petrol vehicles.
Model AP307 is a budget kit containing AP300 and CM7 switch.
Ph: 02 8853 2900 [email protected]
107106
AP300 – VACUUM ACTUATOR CRUISE CONTROL KIT
Suitable for installation by a Professional Installer or Dealership Technician.
The AP300 will read electronic speed signal from an electronic gearbox transducer, reed-switch speedometer, or ECU.
Calibration to vehicle PPM range is achieved by “on-road calibration” while driving the vehicle. Vehicle PPM rate does not need to be verified.
Cruise Control sensitivity and rate of initial engagement may be individually adjusted while driving the vehicle to suit the driver’s requirements.
Suitable for most Australian and imported vehicles including four wheel drives, light commercials with traditional throttle system.
An optional clutch switch is recommended for vehicles with manual transmissions.
An optional vacuum tank is available for vehicles with marginal manifold vacuum, such as turbo-charged petrol vehicles.
Choice of switches available to suit your customer’s preference see pg 113.Model AP307 is a budget kit containing AP300 and CM7 switch.
AP500 – ELECTRIC ACTUATOR CRUISE CONTROL KIT
Suitable for installation by a Professional Installer or Dealership Technician.
The AP500 will read electronic speed signal from an electronic gearbox transducer, reed-switch speedometer, or ECU.
Calibration to vehicle PPM range is achieved by “on-road calibration” while driving the vehicle. Vehicle PPM rate does not need to be verified.
Cruise Control sensitivity and rate of initial engagement may be individually adjusted while driving the vehicle to suit the driver’s requirements.
Suitable for most Australian and imported vehicles including four wheel drives, light commercials with traditional throttle system.
Approved for many “Drive-by-Wire” throttle system vehicles when fitted with optional “vehicle-specific” hardware kit.
An optional clutch switch is recommended for vehicles with manual transmissions.
Choice of switches available to suit your customer’s preference see pg 113.
Ph: 02 8853 2900 [email protected]
109108
‘900’ SERIES ELECTRONIC INTERFACE. MORE THAN JUST A CRUISE CONTROL
900 Series Command Cruise Control™ - Cruise Control just got better!
Featuring:Cruise Control Speed LimiterSpeed Alert
• On road or PC calibration• Fixed Speed Limiting• Voluntary Speed Limiting• Multiple switches available for consumer (see page 10)
• Drive By Wire Base Kit (requires pedal harness and switch)• New ‘self learning’ technology• Speed Limiter/Speed Alert feature included, CANbus capable (selected models)• Multi fit application allows ease of fit, choice and range• Choice of specific designed harnesses to fit today’s modern vehicles that have no throttle cable connections
• Drive in a more relaxed and comfortable manner• Reduce fuel consumption• Avoid accidental speeding• Reduce exhaust gas emissions
90 AP900 - Drive By Wire Cruise Control with Speed Limiter and Speed Alert 90 AP900C - CANbus Cruise Control with Speed Limiter and Speed Alert
‘900’ SERIES ELECTRONIC INTERFACE. MORE THAN JUST A CRUISE CONTROL
Lite On Automotive Electronics and Command Auto Group Pty Ltd have developed an electronic interface Cruise Control for Drive by Wire vehicle applications.
After significant product testing and evaluation, the new ‘900’ Series is available in Australia and offers significant advantages for electronic interface Drive by Wire installations.
This product utilises the current switches available for the AP300 and AP500 products without requiring any specific programming.
The ‘900’ Series product is suitable for multiple vehicle applications and will utilise vehicle specific as well as universal harnesses for various vehicle brands hence eliminating the requirement to carry multiple cruise control models. This has the potential to reduce your inventory requirements significantly.
Calibration for your specific vehicle installation can be performed “on road” with a similar procedure as the current AP300 and AP500 models or via a PC. This procedure is “state of the art” and allows for precise adjustments to suit vehicle peculiarities or driver requirements.
Installers will need to be qualified and approved by CAG prior to purchase.
Choice of switches available to suit your customer’s preference see pg 112.
111
Ph: 02 8853 2900 [email protected]
110
PROFESSIONAL CRUISE CONTROL SWITCHES
Command Cruise Control switches are ergonomically designed to give the best operations, style and function to your Command Cruise Control. From the latest steering wheel options to stalk or pad style, Command Cruise Controls have you covered.
Choice of switches available to suit your customer’s preference including pad mount, left and right stalk-mounts, steering-wheel mount. Also available are gear knob switches for manual vehicles.
Newly modified RF technology switch
Quick mount bracket
Secure “easy to fit” screws for environments with vibration
Low battery indicator (battery life 3+ years)
90CM7 - Dash Pad Switch
CM30 OEM Style Stering Column Stalk Switch
CM35 OEM Style Paddle Switch with double memory function
90CM22 Steering Wheel Switch
90AA141 Magnet Sensing Kit (2 Magnets)90AA142 Magnet Speed Sensing Kit90AA170 Magnetic Clutch Switch90ACT300 Vacuum Actuator - AP300 - 4 wire90ACT500 Electric Actuator - AP50090ACT50B Vacuum Actuator - AP50/AP6090AS4496A Solenoid Pack - 2 Valve90AS5091A Magnet Kit90AS73320 Solenoid Pack - 3 Valve90CAB500A Actuator Cable - AP50090CABSCB Actuator Cable (Straight) - Saddle Clamp90CABTEB Actuator Cable (Straight) - Threaded End90CM6 Control Pad Switch - AP6090CM15 Control Stalk Switch - AP15090LTK0200600 Cable Stop & Grub Screw90MCS Manual Clutch Switch - Standard90MCS2 Manual Clutch Switch - Short90MODAP150 Electronic Module - AP15090MODAP300 Electronic Module - AP30090MODAP500 Electronic Module - AP50090MODAP50E Electronic Module - AP50E90MODAP60B Electronic Module - AP60B90MODAP800IF Electronic Module - AP800 Interface Module90MODAP900 Electronic Module - AP90090OE1164A Speed Sensor Coil
CRUISE CONTROL QUALITY PARTS
The Command Auto Group offers full sales and product support through our Technical Services Division. We offer a full range of replacement parts and our team will be able to assist installers in seeking the appropriate part for their needs.
Ph: 02 8853 2900 [email protected]
113112
