Produktbeschreibung Profile machining centre SBZ 130 eluCam · 2015. 12. 10. · eluCad (office...
3
SBZ 130 eluCam 10.12.2015 13:27 Uhr Page 1 of 3 elumatec AG Pinacher Straße 61 75417 Mühlacker Germany Phone +49 7041 14-0 Fax +49 7041 14-280 [email protected] www.elumatec.com Subject to technical modifications SBZ 130 PROFILE MACHINING CENTRE PROFILE MACHINING CENTRE SBZ 130 ELUCAM Description 3-axis profile machining centre Designed for economical and efficient machining of aluminium, steel and stainless steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces The on-board turret head ensures that tool changing times are kept very short, thereby optimising working cycles The turret head can be equipped with eight tools or angle heads Automatic clamp positioning enables the machine to position the material clamps 3-axis controller The tool spindle is designed as an additional axis 15" colour display, USB ports and network connection Windows operating system eluCam Technical specifications Traverse path X-axis, 4,200 mm, 7,200 mm, 8,500 mm, 10,200 mm, 11,500 mm (additional lengths on request) Vmax. 60 m/min. Traverse path Y-axis, 485 mm, Vmax. 30 m/min. Traverse path Z-axis, 340 mm, Vmax. 30 m/min. Spindle speed 6,000 rpm max., 18,000 rpm with high-speed spindle Spindle power output 5.5 kW
Transcript of Produktbeschreibung Profile machining centre SBZ 130 eluCam · 2015. 12. 10. · eluCad (office...
SBZ 130 eluCam 10.12.2015 13:27 Uhr Page 1 of 3
elumatec AGPinacher Straße 6175417 MühlackerGermany
Phone +49 7041 14-0Fax +49 7041 [email protected] Subject to technical modifications
SBZ 130PROFILE MACHINING CENTRE
PROFILE MACHINING CENTRE SBZ 130 ELUCAM
Description
3-axis profile machining centreDesigned for economical and efficient machining of aluminium,steel and stainless steel profilesAll operations, such as routing, drilling and tapping are performed while the profile bar isstationary to protect the profile surfacesThe on-board turret head ensures that tool changing times are keptvery short, thereby optimising working cyclesThe turret head can be equipped with eight tools or angle headsAutomatic clamp positioning enables the machine to position the material clamps3-axis controllerThe tool spindle is designed as an additional axis15" colour display, USB ports and network connectionWindows operating systemeluCam
Technical specifications
Traverse path X-axis, 4,200 mm, 7,200 mm, 8,500 mm, 10,200 mm, 11,500 mm(additional lengths on request) Vmax. 60 m/min.Traverse path Y-axis, 485 mm, Vmax. 30 m/min.Traverse path Z-axis, 340 mm, Vmax. 30 m/min.Spindle speed 6,000 rpm max., 18,000 rpm with high-speed spindleSpindle power output 5.5 kW
SBZ 130 eluCam 10.12.2015 13:27 Uhr Page 2 of 3
elumatec AGPinacher Straße 6175417 MühlackerGermany
Phone +49 7041 14-0Fax +49 7041 [email protected] Subject to technical modifications
Tool changer for eight tools on a turret headCompressed air supply 7 barPower supply 400 V, 3~, 50 Hz, 35 AAir consumption per minute approx. 100 l with spraying
Machining lengths SBZ 130 – 4.2 m
Max. processing length with profile end machining, 4,080 mmMax. processing length without profile end machining, 4,200 mm
SBZ 130 – 7.2 m
Max. processing length with profile end machining, 7,080 mmMax. processing length without profile end machining, 7,200 mm
SBZ 130 – 8.5 m
Max. processing length with profile end machining, 8,380 mmMax. processing length without profile end machining, 8,500 mm
SBZ 130 – 10.2 m
Max. processing length with profile end machining, 10,080 mmMax. processing length without profile end machining, 10,200 mm
SBZ 130 – 11.5 m
Max. processing length with profile end machining, 11,380 mmMax. processing length without profile end machining, 11,500 mm
Options
Shuttle operation for working on two sidesAutomatic length measurementChips conveyor beltAngle router headsHigh-speed spindleSlow spindleClamping unit accommodates double profile machiningBarcode scannerCollet chucksColletsToolseluCad (office software package for optimised production management)
SBZ 130 eluCam 10.12.2015 13:27 Uhr Page 3 of 3
elumatec AGPinacher Straße 6175417 MühlackerGermany
Phone +49 7041 14-0Fax +49 7041 [email protected] Subject to technical modifications
Profile machiningcentre SBZ 130 eluCamSBZ 130 + specialaccessories
Profile machiningcentre SBZ 130 eluCam
Profile machiningcentre SBZ 130 eluCam
Profile machiningcentre SBZ 130 eluCam
Profile machiningcentre SBZ 130 eluCam
Profile machiningcentre SBZ 130 eluCam
