Product overview - HAWE Hydraulik SEdownloads.hawe.com/K/HAWE-Kompakt-en.pdf · 4/65 HAWE compact -...
Transcript of Product overview - HAWE Hydraulik SEdownloads.hawe.com/K/HAWE-Kompakt-en.pdf · 4/65 HAWE compact -...
HAWE compactProduct overview
HAW
E compact
Product overview
2/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
© by HAWE Hydraulik SE.The reproduction and distribution of this document as well as the use and communication of its contents to others withoutexplicit authorisation is prohibited.Offenders will be held liable for the payment of damages.All rights reserved in the event of patent or utility model applications.Brand names, product names and trademarks are not specifically indicated. In particular with regard to registered andprotected names and trademarks, usage is subject to legal provisions.HAWE Hydraulik respects these legal provisions in all cases.Printing date / document generated on: 05.06.2020
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 3/65
Contents
1 Pumps and hydraulic power packs........................................................................................................................... 81.1 Radial piston pumps.................................................................................................................................................81.2 Axial piston pumps.................................................................................................................................................. 81.3 Air-driven hydraulic pumps...................................................................................................................................... 101.4 Hand pumps.......................................................................................................................................................... 101.5 Compact hydraulic power packs................................................................................................................................ 111.6 Standard hydraulic power packs................................................................................................................................141.7 Air-powered hydraulic power packs........................................................................................................................... 14
2 Valves and valve banks......................................................................................................................................... 152.1 Directional valves...................................................................................................................................................152.1.1 On/off directional spool valve..................................................................................................................................152.1.2 Proportional directional spool valve..........................................................................................................................172.1.3 Directional seated valves.........................................................................................................................................192.2 Load-holding valves................................................................................................................................................232.3 Pressure control valves............................................................................................................................................242.3.1 Pressure limiting valves and pre-load valves.............................................................................................................. 242.3.2 Proportional pressure limiting valves........................................................................................................................ 252.3.3 Pressure reducing valves..........................................................................................................................................252.3.4 Proportional pressure reducing valves........................................................................................................................262.3.5 Switch-off and shut-off valves, two-stage valves........................................................................................................ 272.4 Flow valves............................................................................................................................................................292.4.1 Restrictors, throttles, throttle shut-off valves............................................................................................................ 292.4.2 Flow control valves.................................................................................................................................................302.4.3 Proportional ow control valves............................................................................................................................... 312.4.4 Flow dividers......................................................................................................................................................... 322.5 Check valves.......................................................................................................................................................... 322.5.1 Check valves.......................................................................................................................................................... 322.5.2 Releasable check valves.......................................................................................................................................... 332.5.3 Line rupture protection valve, shuttle valves..............................................................................................................342.5.4 Servo-suction and pre-ll valves...............................................................................................................................35
3 Electronics........................................................................................................................................................... 363.1 Mobile controllers...................................................................................................................................................363.2 Proportional ampliers............................................................................................................................................ 363.3 Sensors................................................................................................................................................................. 373.4 Pressure switches................................................................................................................................................... 373.5 Line connectors......................................................................................................................................................38
4 Cylinders and motors............................................................................................................................................ 394.1 Motors.................................................................................................................................................................. 394.2 Hydraulic cylinders..................................................................................................................................................394.3 Clamping cylinders..................................................................................................................................................39
5 Accessories...........................................................................................................................................................405.1 Memory................................................................................................................................................................. 405.2 Filter.................................................................................................................................................................... 405.3 Fittings................................................................................................................................................................. 41
6 System solutions.................................................................................................................................................. 426.1 Hydraulic locking systems........................................................................................................................................426.2 Press control systems..............................................................................................................................................42
4/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
7 Appendix..............................................................................................................................................................457.1 Hydraulic uids – notes for selection........................................................................................................................457.1.1 Overview of temperature and viscosity...................................................................................................................... 457.2 Formulas and units.................................................................................................................................................527.2.1 Conversion table.................................................................................................................................................... 527.3 Contact ofces and representatives...........................................................................................................................537.4 Type index.............................................................................................................................................................59
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 5/65
Introduction
This compact catalogue provides an overview of HAWE Hydraulik products and components available either separately orpackaged together as hydraulic solutions. It is sorted by device type and lists the most important performance data.
Thanks to our approach of consistently designing all components based on a modular system, our components can be easilycombined to form space-saving units offering added value. If your requirements are not covered by the product range shownhere, we will also be glad to design custom hydraulic solutions.
Your HAWE sales representative or sales partner can provide additional technical documentation, electrical diagrams or 3Dmodels for individual components and even complete solutions. They will be glad to assist you with selecting and configuringyour system, commissioning and servicing.
The contact data for the contact partner in your region is included in the appendix or available here HAWE Hydraulik SE - www.hawe.com/contact.
View of the Alps from the HAWE plant in Kaufbeuren, Germany
About our company in brief
HAWE Hydraulik SE is a modern, professionally run family business that supplies customers all over the world.
Acting as a reliable development partner, we offer application expertise and experience across more than 70 elds ofmechanical engineering alongside a comprehensive range of highly exible modular products. The range includes hydraulicpower packs, constant and variable pumps, valves, sensors and accessories. Ideally adapted electronic components andsoftware expertise complement system elements to allow simple commissioning, activation and condition monitoring.The intelligent system solutions reduce energy consumption and operating costs. Compact drives save space and permitinnovative machine design.
HAWE - Intelligent solutions to tackle global problems
6/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
HAWE - Intelligent solutions to tackle global problems
Stationary hydraulics
In machine tools, testing machinery and many other industrial applications, tensioning and clamping functions are oftenactuated using hydraulics. In addition to the high output density and energy-efcient drive concept, the integrated monitor-ing functions also prove particularly useful during operation.
Compact hydraulic power packs in standby mode, a speed-controlled drive concept and an accumulator charging mode arejust some of the methods used to increase system efficiency. What’s more, zero-leakage directional seated valves, highpressure and intelligent control by the electronics system open up other application elds such as presses, hydraulic tools andrenewable energy sources.
HAWE - Intelligent solutions to tackle global problems
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 7/65
Mobile hydraulics
HAWE Hydraulik provides manufacturers of mobile machines with components for creating an energy-efcient system to helpthem comply with established standards and regulations.
Proportional directional spool valves regulate the movement speed of the hydraulic consumers continuously and independent-ly of the load. Load-holding valves reliably secure the position of the load and are an important system element for suppress-ing unwanted oscillations. Axial piston pumps provide the ow rate required depending on the specic needs. When individ-ual components are supplied from a single source, you can be sure they have been coordinated with one another and it isknown how they will interact with one another.
Our Sales and Service representatives will be glad to provide you with professional, local assistance for adapting our productsto your specic needs – before, during and after commissioning.
8/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
1 Pumps and hydraulic power packs
1.1 Radial piston pumps
Type Design / features pmax
(bar)Vg max
(cm3/rev)Document
Radial piston pumptype R, RG, RZ
■ Single pump■ Motor pump■ Hydraulic power pack
– High level of efficiency– Compact dimensions– Max. 14 separate pressure outlets– available from the modular product
range as hydraulic power pack withvalve banks
R 7631: 700
R, RG 6010: 700R, RG 6011: 700R, RG 6012: 700R, RG 6014: 700R, RG 6016: 700
HP/LP:RZ 7631: 700/200RZ 6910: 700/200RZ 6911: 700/200RZ 6912: 700/200RZ 6914: 700/200RZ 6916: 700/200
R 7631: 1.59
R, RG 6010: 4.58R, RG 6011: 10.7R, RG 6012: 21.39R, RG 6014: 42.78R, RG 6016: 64.18
HP/LP:RZ 7631: 1.59/7.9RZ 6910: 4.58/26RZ 6911: 10.7/87.5RZ 6912: 21.4/87.5RZ 6914: 42.8/87.5RZ 6916: 64.2/87.5
D 6010 D 6010 HD 6910D 6910 H
1.2 Axial piston pumps
Type Design / features pmax
(bar)Vg max
(cm3/rev)Document
Variable displacementaxial piston pumptype V30D
■ Pump combination
– Low-noise– Long lifetime even under demanding
application conditions– Broad selection of controllers– Full torque available at the second
pump in tandem pump applications
Nominal pressure/peak pressure:045: 350/420075: 350/420095: 350/420115: 250/300140: 350/420160: 250/300250: 350/420
045: 45075: 75095: 96115: 115140: 142160: 164250: 250
D 7960
Variable displacementaxial piston pumptype V30E
■ Pump combination
– Low-noise– Long lifetime even under demanding
application conditions– Broad selection of controllers– Full torque available at the second
pump in tandem pump applications– High self-suction speed
Nominal pressure/peak pressure:095: 350/420160: 350/420270: 350/420
095: 98160: 160270: 270
D 7960 E
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 9/65
Type Design / features pmax
(bar)Vg max
(cm3/rev)Document
Variable displacementaxial piston pumptype V80M
■ Medium-duty mobile pump
– Low-noise– Long lifetime even under demanding
application conditions– Broad selection of controllers– Full torque available at the second
pump in tandem pump applications– High self-suction speed
Nominal pressure/peak pressure200: 400/450 200: 202
D 7962 M
Variable displacementaxial piston pumptype V60N
■ Medium-duty mobile pump
– Optimized power-to-weight ratio– Broad selection of controllers– Slim design for direct PTO mounting– Thru-shaft compatibility– High self-suction speed
Nominal pressure/peak pressure060: 350/400090: 350/400110: 350/400130: 400/450
060: 60090: 90110: 110130: 130
D 7960 N
Fixed displacementaxial piston pumptype K60N
■ Medium-duty mobile pump
– Optimized power-to-weight ratio– Slim design– Quiet operation over the complete
speed range– Different shaft and ange versions
400 012: 12.6017: 17.0025: 25.4034: 34.2040: 41.2047: 47.1056: 56.0064: 63.6084: 83.6108: 108.0
D 7960 K
Fixed displacementaxial piston pumptype K61N
■ Medium-duty mobile pump
– Optimized power-to-weight ratio– Slim design for direct PTO mounting– Quiet operation over the complete
speed range– Low heat generation
400 012: 12.6017: 17.0025: 25.4034: 34.2040: 41.2047: 47.1056: 56.0064: 63.6084: 83.6108: 108.0
D 7961 K
10/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
1.3 Air-driven hydraulic pumps
Type Design / features pmax
(bar)Vg max
(cm3/stroke)Document
Air-driven hydraulicpumptype LP
■ Single pump
– High operating pressures– Suitable for explosion-proof systems
and equipment– No electrical energy– Hydraulic power packs with direct valve
mounting
80: 700125: 1500160: 1500
80: 6.00125: 28.30160: 28.30
D 7280D 7280 H
1.4 Hand pumps
Type Design / features pmax
(bar)Vg max
(cm3/stroke)Document
Hand pumptype H, HE and HD
■ Single-acting■ Double-acting
H - 16: 350H - 20: 220H - 25: 150
HE - 3: 800HE - 4: 600
HD - 13: 350HD - 20: 220HD - 30: 150
H - 16: 6.00H - 20: 9.40H - 25: 14.70
HE - 3: 3.00HE - 4: 4.00
HD - 13: 13.00HD - 20: 20.00HD - 30: 30.00
D 7147/1
Hand pumptype CH
■ Single-acting 08: 250 08: 8.3 D 7147 CH
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 11/65
1.5 Compact hydraulic power packs
Type Version/tank volume (l) pmax
(bar)Vg max
(cm3/rev)Document
Compact hydraulicpower pack type A
■ with electric motor■ DC and AC power supply■ Suitable for short period operation■ Non-reversible
A065
– Fill volume approx. 0.3 to 0.5– Usable volume approx. 0.2 to 0.4
A10
– Fill volume approx. 0.4 to 1.2– Usable volume approx. 0.3 to 0.8
065: 16010: 210
065: 110: 2.5
D 6025D 6034
Compact hydraulicpower pack type HR050, HR080,HR120
■ with electric motor■ DC, three-phase or AC power supply■ Suitable for intermittent operation■ Reversible
HR050
– Fill volume approx. 0.07 to 0.3– Usable volume approx. 0.05 to 0.23
HR080
– Fill volume approx. 0.3– Usable volume approx. 0.2
HR120
– Fill volume approx. 0.8– Usable volume approx. 0.7
050: 200080: 210120: 210
050: 0.15080: 0.19120: 0.19
D 6014D 6342D 6343
Servo power pack type HS
■ AC synchronous motor■ Operating mode depends on load
spectrum■ Reversible
– Fill volume approx. 0.7 to 2.0– Usable volume approx. 0.5 to 1.6
150 1.6 D 6347
12/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Version/tank volume (l) pmax
(bar)Vg max
(cm3/rev)Document
Compact hydraulicpower packtype NPC
■ with electric motor■ DC power supply■ Suitable for intermittent operation
– Fill volume approx. 1.0– Usable volume approx. 0.6
HP/LP:1: 750/200
HP/LP:1: 0.76/1.0
D 7940
Compact hydraulicpower packtype HC, HCW
■ With integrated electric motor■ 1-phase or 3-phase version■ Suitable for intermittent operation
– Fill volume approx. 0.9 to 2.5– Usable volume approx. 0.5 to 1.5
HP/LP:1: 700/1502: 700/150
1: 0.762: 1.59
D 7900
Compact hydraulicpower pack type H
■ with electric motor■ 3-phase version■ Suitable for intermittent operation
H3
– Fill volume approx. 2.5 to 3.9– Usable volume approx. 1.9 to 3.3
H4
– Fill volume approx. 4.7 to 10.5– Usable volume approx. 4.0 to 9.5
3: 1904: 230
3: 1.524: 7.9
D 6344D 6345
Compact hydraulicpower packtype KA, KAW
■ With integrated electric motor■ 1-phase or 3-phase version■ Suitable for intermittent operation
KA 2
– Fill volume approx. 3.9 to 11.1– Usable volume approx. 1.8 to 8.9
KA 4
– Fill volume approx. 13.0 to 31.0– Usable volume approx. 5.0 to 25.0
HP/LP:2: 700/2004: 700/200
HP/LP:2: 3.61/7.94: 9.17/30.2
D 8010D 8010-4
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 13/65
Type Version/tank volume (l) pmax
(bar)Vg max
(cm3/rev)Document
Compact hydraulicpower packtype CPU
■ With integrated electric motor■ 3-phase version■ Suitable for intermittent operation
– Fill volume approx. 6.0 to 16.1– Usable volume approx. 2.5 to 12.6
350 7.9 D 8010 CPU
Compact hydraulicpower packtype HK, HKF, HKL
■ With integrated electric motor■ 1-phase or 3-phase■ Suitable for continuous and intermit-
tent operation
HK 3
– Fill volume approx. 4.6 to 6.1– Usable volume approx. 1.4 to 2.9
HK 4, HKF 4
– Fill volume approx. 5.8 to 15.4– Usable volume approx. 1.9 to 11.1
HKL 3
– Fill volume approx. 3.7 to 13.0– Usable volume approx. 1.7 to 9.1
HP/LP:HK - 3: 700/170HK - 4: 700/250
HKF - 4: 700/220
HKL - 3: 700/200
HP/LP:HK - 3: 4.58/4.8HK - 4: 9.17/17.0
HKF - 4: 9.17/17.0
HKL - 3: 6.11/14.5
D 7600-4D 7600-3D 7600-3L
Compact hydraulicpower pack Type MP, MPN, MPW,MPNW
■ With integrated electric motor■ Single-circuit or dual-circuit pump■ Suitable for intermittent or load/no
load operation
– Fill volume approx. 17.0 to 100.0– Usable volume approx. 10.0 to 75.0
HP/LP:MP - 1: 700/220MP - 2: 700/200
MPN - 4: 700/220
HP/LP:MP - 1: 0.95/4.76MP - 2: 1.59/26
MPN - 4: 9.17/61
D 7200D 7200 HD 7207
14/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
1.6 Standard hydraulic power packs
Type Version/tank volume (l) pmax
(bar)Vg max
(cm3/rev)Document
Standard hydraulic power pack type FXU
■ Standard hydraulic power pack
– Fill volume approx. 30.0 to 630.0– Usable volume approx. 27.0 to 565.0
R: 700Z: 240RZ: 700/200
R: 64.2Z: 63RZ: 64.2/87.5
D 6020
1.7 Air-powered hydraulic power packs
Type Version/tank volume (l) pmax
(bar)Vg max
(cm3/rev)Document
Air-driven hydraulicpower packtype LP
■ Hydraulic power pack
– Fill volume approx. 5.8 to 33.0– Usable volume approx. 3.8 to 28.0
80: 700125: 700160: 700
80: 6.00125: 28.30160: 28.30
D 7280 H
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 15/65
2 Valves and valve banks
2.1 Directional valves
2.1.1 On/off directional spool valve
Type Design / actuation pmax
(bar)Qmax
(lpm)Document
Directional valve type WLA3
■ Manifold mounting valve
– Solenoid
250 8 D 6023
4/2- and 4/3-direction-al spool valvetype HAM, HBM, HCM,HAL
■ Manifold mounting valve (NG-4)
– Solenoid– Manual
320 04: 30 D 6537D 6450
4/2- and 4/3-direction-al spool valvetype SAM, SBM, SCM,SAL
■ Manifold mounting valve (NG-6, NG-10)
– Solenoid– Manual
320 06: 6010: 10012: 100
D 6549
Directional spool valvetype SWPN, NSWP
■ Manifold mounting valve (NG-6, NG-10)
– Solenoid
SWPN: 350
NSWP: 315
SWPN 21: 80SWPN 81: 120
NSWP 2: 25
D 7451 ATD 7451 N
Valve banktype TLC3
■ With series connection■ For pipe connection■ For combining
with A10 compact hydraulic powerpacks
– Solenoid– With releasable check valves– With return throttles
250 3 D 6020 TLC 3
16/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Design / actuation pmax
(bar)Qmax
(lpm)Document
Valve banktype BA
■ Valve bank enabling pipe connection(NG-6)
■ Directional spool valve■ Directional seated valve■ Intermediate plates with various
functions
– Solenoid– Pressure-actuated– Manual– Mechanical
2: 400 2: 50 D 7788
Directional spool valve type CWS
■ Valve bank design
– Solenoid
315 2: 80 D 7951 CWS
Directional spool valvetype SG, SP
■ Single valve for pipe connection■ Manifold mounting valve
– Solenoid– Manual– Mechanical– Pressure-actuated
400 0: 121: 202: 303: 505: 100
D 5650/1
Directional spool valvetype HSL, HSF
■ Single valve for pipe connection■ Manifold mounting valve
– Electro-hydraulic– Hydraulic
400 3: 804: 160
D 7493 LD 7493 E
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 17/65
2.1.2 Proportional directional spool valve
Type Version/actuation pmax
(bar)Qmax
(lpm)Document
Proportional directional spool valvetype POH, PIH
■ Manifold mounting valve (NG-6)
– Solenoid
06: 35010: 350
06: 5010: 125
D 6418D 6419
Proportional directional spool valvetype POL, PRL, PIL
■ Manifold mounting valve (NG-6)
– Solenoid
06: 35008: 35010: 350
06: 3608: 4010: 100
D 6394D 6395
Directional spool valvetype NSWP
■ Manifold mounting valve (NG-6)
– Solenoid
315 2 D 7451 N
Clamping module type NSMD
■ Manifold mounting valve (NG-6)■ Valve banks are available with type BA
– Solenoid
2: 120 2: 25 D 7787
Valve banktype BA
■ Valve bank enabling pipe connection(NG-6)
■ Directional spool valve■ Directional seated valve■ Intermediate plates with various
functions
– Solenoid– Pressure-actuated– Manual– Mechanical
2: 400 2: 50 D 7788
18/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Version/actuation pmax
(bar)Qmax
(lpm)Document
Valve bank type BNG
■ Valve bank enabling pipe connection(NG-6)
■ Directional spool valve■ Directional seated valve■ Intermediate plates with various
functions
– Solenoid– Pressure-actuated– Manual– Mechanical
2: 400 2: 60 D 7788 ZD 7788 BNG
Proportional directional spool valvetype EDL
■ Valve bank design
– Solenoid
2: 320 2: 50 D 8086
Proportional directional spool valvetype PSL, PSV
■ Valve bank design
– Manual– Electro-hydraulic– CAN bus– Hydraulic– Pneumatic
2: 4203: 4205: 400
2: 603: 1205: 240
D 7700-2D 7700-3D 7700-5D 7700 CAN
Proportional directional spool valvetype PSLF, PSVF
■ Valve bank in ange design
– Manual– Electro-hydraulic– CAN bus– Hydraulic– Pneumatic
3: 4205: 4007: 400
3: 1205: 2407: 500
D 7700-FD 7700-7FD 7700 CAN
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 19/65
2.1.3 Directional seated valves
Type Version/actuation p max
(bar)Q max
(lpm)Document
Valve banktype SL
■ With series connection■ For combining with A10 compact
hydraulic power packs
– Solenoid– With return throttles
200 1 D 6024
Valve banktype SLC
■ With series connection■ For pipe connection
– Solenoid– With releasable check valves
150 1 D 6033
Directional seatedvalve type SP3
■ Plug-in valve
– Solenoid– Directly controlled
250 4 D 6019
Directional seatedvalvetype VP
■ Manifold mounting valve
– Solenoid– Hydraulic– Pneumatic– Mechanical– Manual
1: 400 1: 15 D 7915
Directional seatedvalvetype BVG, BVP, NBVP
■ For pipe connection■ Manifold mounting valve (NG-6)
– Solenoid– Hydraulic– Pneumatic– Manual
1: 40016: 400
1: 2016: 20
D 7765D 7765 N
20/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Version/actuation p max
(bar)Q max
(lpm)Document
Valve banktype BA
■ Valve bank enabling pipe connection(NG-6)
■ Directional spool valve■ Directional seated valve■ Intermediate plates with various
functions
– Solenoid– Pressure-actuated– Manual– Mechanical
2: 400 2: 50 D 7788
Valve bank type BNG
■ Valve bank enabling pipe connection(NG-6)
■ Directional spool valve■ Directional seated valve■ Intermediate plates with various
functions
– Solenoid– Pressure-actuated– Manual– Mechanical
2: 400 2: 60 D 7788 ZD 7788 BNG
Directional seatedvalvetype VH, VHR, VHP
■ Single valve for pipe connection■ Manifold mounting valve■ Valve bank
– Manual
VH - 1: 700VH - 2: 500
VHP - 1: 700
VHR - 1: 700VHR - 2: 500
VH - 1: 12VH - 2: 25
VHP - 1: 12
VHR - 1: 12VHR - 2: 25
D 7647
Valve bank(directional seatedvalve)type BVH
■ For pipe connection■ Combination with pump units
– Solenoid
11: 400 11: 20 D 7788 BV
Directional seatedvalvetype CVK, CVS, CVD
■ Plug-in valve
– Hydraulic
16: 35032: 350
16: 30032: 700
D 6452
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 21/65
Type Version/actuation p max
(bar)Q max
(lpm)Document
Directional seatedvalve type WN, WH
■ Manifold mounting valve■ Combination with connection block for
pipe connection
– Solenoid
WN - 1: 350
WH - 1: 450WH - 2: 350WH - 3: 350
WN - 1: 5
WH - 1: 8WH - 2: 15WH - 3: 30
D 7470 A/1
Valve bank (directionalseated valve) type BWN, BWH
■ For pipe connection■ Combination with pump units
– Solenoid
BWN - 1: 350
BWH - 1: 450 BWH - 2: 350 BWH - 3: 350
BWN - 1: 5
BWH - 1: 8 BWH - 2: 15 BWH - 3: 30
D 7470 B/1
Directional seatedvalvetype SVS, SVN, IVN,IVS
■ Screw-in valve■ Combination with connection block for
pipe connection
– Solenoid
08: 35012: 350
08: 3012: 100
D 6405D 6406D 6354D 6355D 6534D 6412D 6413D 6414D 6415D 6416D 6417
Directional seatedvalve type G, WG
■ Manifold mounting valve
– Solenoid– Pressure-actuated– Manual– Mechanical
0: 5001: 7002: 7003: 40012: 700
0: 61: 122: 253: 6512: 12
D 7300D 7300 ND 7300-12
Valve bank (directionalseated valve)type VB
■ For pipe connection■ Combination with pump units
– Solenoid– Pressure-actuated– Manual– Mechanical
01: 50011: 70021: 70022: 70031: 400
01: 611: 1221: 2522: 2531: 60
D 7302D 7302-22
22/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Version/actuation p max
(bar)Q max
(lpm)Document
Directional seatedvalve type EM, EMP
■ Screw-in valve■ Combination with connection block for
pipe connection■ Combination with connection block for
swivel tting
– Solenoid
EM - 1: 450EM - 2: 400EM - 3: 400EM - 4: 350
EMP - 2: 400EMP - 3: 400EMP - 4: 350
EM - 1: 20EM - 2: 40EM - 3: 80EM - 4: 160
EMP - 2: 40EMP - 3: 80EMP - 4: 160
D 7490/1D 7490/1 E
Switch unittype CR
■ Single valve for pipe connection
– Solenoid– Manual
HP/LP:4: 400/605: 400/60
HP/LP:4: 8/805: 20/160
D 7150
Directional seatedvalve type BVE
■ Screw-in valve■ Combination with connection block for
pipe connection■ Combination with connection block for
manifold mounting
– Solenoid
1: 5003: 4005: 400
1: 203: 705: 300
D 7921
Directional seatedvalvetype MSV, RSV
■ Manifold mounting valve
– Solenoid– Manual
06: 35010: 350
16: 35032: 350
06: 1010: 30
16: 15032: 320
D 6407D 6409D 6410
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 23/65
2.2 Load-holding valves
Type Version/adjustability pmax
(bar)Qmax
(lpm)Document
Load-holding valve type LHK, LHT
■ Single valve for pipe connection■ Manifold mounting valve■ Screw-in valve, version for banjo bolt
mounting
– Fixed– Adjustable
LHK - 2: 400LHK - 3: 360LHK - 4: 350
LHT - 2: 400LHT - 3: 420LHT - 5: 400
LHK - 2: 20LHK - 3: 60LHK - 4: 100
LHT - 2: 28LHT - 3: 130LHT - 5: 250
D 7100D 7918
Load-holding valve type LHDV
■ Single valve for pipe connection■ Manifold mounting valve■ Screw-in valve, version for banjo bolt
mounting
– Fixed– Adjustable
33: 420 33: 80 D 7770
Load-holding valve type CLHV
■ Screw-in valve■ Single valve for pipe connection■ Manifold mounting valve
– Fixed– Adjustable
2: 3503: 3505: 3507: 350
2: 303: 755: 1507: 320
D 7918-VI-CD 7918-VI-PIB
24/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
2.3 Pressure control valves
2.3.1 Pressure limiting valves and pre-load valves
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Pressure limiting valvetype MV, SV, DMV
■ Single valve for pipe connection■ Manifold mounting valve■ Screw-in valve■ Installation kit
– Fixed– Adjustable– Version with unit approval
MVG - 13: 700MVG - 14: 700
MV, SV - 4: 700MV, SV - 5: 700MV, SV - 6: 700MV, SV - 8: 700
DMV - 4: 350DMV - 5: 350DMV - 6: 350DMV - 8: 400
MVG - 13: 8MVG - 14: 8
MV, SV - 4: 20MV, SV - 5: 40MV, SV - 6: 70MV, SV - 8: 160
DMV - 4: 20DMV - 5: 40DMV - 6: 75DMV - 8: 160
D 7000/1D 3726D 7000 E/1D 7000 MD 7000 TUV
Pressure limiting valvetype CMV, CSV
■ Screw-in valve■ Combination with connection block for
pipe connection
– Fixed– Adjustable– Version with unit approval
CMV - 1: 500CMV - 2: 500CMV - 3: 500
CSV - 2: 315CSV - 3: 315
CSVZ - 2: 315
CMVZ - 2: 500
CMV - 1: 20CMV - 2: 40CMV - 3: 60
CSV - 2: 40CSV - 3: 60
CSVZ - 2: 40
CMVZ - 2: 40
D 7710 MVD 7710 TUV
Pressure limiting valvepilot-controlledtype DV
■ Single valve for pipe connection■ Manifold mounting valve
– Fixed– Adjustable
3: 4204: 4205: 420
3: 404: 805: 120
D 4350
Pre-loadcheck valvestype VR
■ Insert valve■ Housing version
– Fixed
1: 3152: 3153: 3154: 315
1: 152: 403: 654: 120
D 7340
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 25/65
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Pressure limiting valvetype VDB, VUB
■ Screw-in valve
– Fixed– Adjustable– Version with unit approval
03: 35004: 35006: 35008: 42010: 42016: 35032: 350
03: 1004: 2006: 3008: 6010: 12016: 15032: 320
D 6362D 6364D 6365D 6377D 6384
2.3.2 Proportional pressure limiting valves
Type Version/adjustability pmax
(bar)Qmax
(lpm)Document
Proportionalpressure limiting valvetype PMV, PDV
■ Single valve for pipe connection■ Manifold mounting valve
– Solenoid
PMV - 4: 700PMV - 5: 450PMV - 6: 320PMV - 8: 180
PDV - 3: 350PDV - 4: 350PDV - 5: 350
PMV - 4: 16PMV - 5: 60PMV - 6: 75PMV - 8: 120
PDV - 3: 40PDV - 4: 80PDV - 5: 120
D 7485/1D 7486D 7485 ND 7788 Z
Proportional pressure limiting valvetype SPDB, VPDB
■ Manifold mounting valve■ Insert valve
– Solenoid
06: 35016: 35032: 350
06: 216: 15032: 320
D 6362D 6364D 6377D 6385D 6386D 6387
2.3.3 Pressure reducing valves
Type Design / adjustability pmax/pA
(bar)Qmax
(lpm)Document
Pressure reducing valvetype ADC, ADM, ADME,AM
■ Single valve for pipe connection■ Manifold mounting valve■ Screw-in valve
– Fixed
ADC 1: 300/25
ADM 1: 315/70
ADME 1: 315/70
AM 1: 400/100
ADC 1: 2
ADM 1: 10
ADME 1: 8
AM 1: 2
D 7458
26/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Design / adjustability pmax/pA
(bar)Qmax
(lpm)Document
Pressure reducingvalve type ADM, VDM
■ Single valve for pipe connection■ Manifold mounting valve■ ADM: directly controlled■ VDM: pilot-controlled
– Fixed– Adjustable
ADM: 320/250
VDM: 400/300
ADM 11: 12ADM 21: 25ADM 32: 60
VDM 3: 40VDM 4: 70VDM 5: 120
D 7120D 5579
Pressure reducingvalve type CDK, CLK, DK,DLZ, DZ
■ Screw-in valve according to the 2-wayprinciple
■ Combination with connection block
– Fixed– Adjustable
CDK - 3: 500/450
CLK - 3: 500/450
DLZ - 3: 400/380
DK - 3: 500/450
DZ - 3: 500/450
CDK - 3: 22
CLK - 3: 22
DLZ - 3: 22
DK - 3: 22
DZ - 3: 22
D 7745D 7745 LD 7941
Pressure reducingvalve type VDM2
■ Insert valve■ Manifold mounting valve
– Solenoid
16: 350 16: 150
2.3.4 Proportional pressure reducing valves
Type Version/adjustability pmax/pA
(bar)Qmax
(lpm)Document
Proportional pressure reducing valvetype PM, PMZ
■ Insert valve■ Manifold mounting valve
– Solenoid
40/30 2 D 7625
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 27/65
Type Version/adjustability pmax/pA
(bar)Qmax
(lpm)Document
Proportionalpressure reducing valvetype PDM
■ Single valve for pipe connection■ Manifold mounting valve
– Solenoid
1: 320/3202: 320/1803: 350/3504: 350/3505: 350/350
1: 122: 203: 404: 805: 120
D 7486D 7584/1
Proportional pressure reducing valvetype VPDM
■ Manifold mounting valve
– Solenoid
06: 35016: 350
06: 2016: 100
D 6388D 6530
2.3.5 Switch-off and shut-off valves, two-stage valves
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Pressure-controlledshut-off valvetype CNE
■ 2-way idle circulation valve■ Screw-in valve
– Fixed
2: 50021: 50022: 50023: 500
2: 3021: 3022: 3023: 30
D 7710 NE
Two-stage valvetype NE
■ Two-stage valve(high-pressure /low-pressure stage)
■ Single valve for pipe connection
– Fixed
HP/LP:20, 21: 700/5570: 500/6080: 500/30
HP/LP:20, 21: 10/4070: 16/10080: 25/180
D 7161
28/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Shut-off valvetype LV, ALZ
■ Shut-off valve (idle circulation valve,directly controlled or pilot-controlled)
■ Single valve for pipe connection ormanifold mounting
– Fixed– Adjustable
LV - 10: 350LV - 20: 350LV - 25: 350
ALZ - 3: 350ALZ - 4: 350ALZ - 5: 350
LV - 10: 12LV - 20: 25LV - 25: 25
ALZ - 3: 50ALZ - 4: 80ALZ - 5: 120
D 7529D 6170 ALZ
Pressure-controlledshut-off valvetype DSV, CDSV
■ Single valve for pipe connection■ Manifold mounting valve■ Screw-in valve
– Fixed– Manual
CDSV - 1: 600
DSV - 21-1: 400DSV - 2-2: 400DSV - 2-3: 400
CDSV - 1: 8
DSV - 21-1: 20DSV - 2-2: 40DSV - 2-3: 60
D 3990D 7876
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 29/65
2.4 Flow valves
2.4.1 Restrictors, throttles, throttle shut-off valves
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Restrictors and restric-tor check valvetype EB, BE, BC
■ Plug-in valve■ Screw-in valve■ Combination with housing for pipe
connection
EB - 0: 500EB - 1: 500EB - 2: 500EB - 3: 500EB - 4: 500
BE - 0: 500BE - 1: 500BE - 2: 500BE - 3: 500BE - 4: 500
BC - 1: 700BC - 2: 700BC - 3: 500
EB - 0: 6EB - 1: 12EB - 2: 40EB - 3: 100EB - 4: 120
BE - 0: 12BE - 1: 25BE - 2: 40BE - 3: 80BE - 4: 120
BC - 1: 20BC - 2: 35BC - 3: 60
D 6969 BD 7555 BD 6465
Throttle valvetype Q, QR, QV, FG
■ Screw-in valve■ Single valve for pipe connection■ Angle valve■ Banjo bolt■ Swivel tting
– Tool adjustable
Q, QR - 20: 400Q, QR - 30: 400Q, QR - 40: 400Q, QR - 50: 400Q, QR - 60: 315
QV - 20: 400QV - 30: 400QV - 40: 400QV - 50: 400QV - 60: 315
FG: 320
Q, QR - 20: 12Q, QR - 30: 20Q, QR - 40: 40Q, QR - 50: 60Q, QR - 60: 80
QV - 20: 8QV - 30: 12QV - 40: 20QV - 50: 30QV - 60: 50
FG: 0.8
D 7730D 7275
Throttle valvetype ED, RD, RDF
■ Single valve for pipe connection
– Tool adjustable, xed– Manual, adjustable
ED, RD - 11: 500ED, RD - 21: 500ED, RD - 31: 500ED, RD - 41: 500ED, RD - 51: 500
RDF - 11: 500RDF - 21: 500RDF - 31: 500RDF - 41: 500RDF - 51: 500
ED, RD - 11: 15ED, RD - 21: 35ED, RD - 31: 60ED, RD - 41: 100ED, RD - 51: 150
RDF - 11: 15RDF - 21: 35RDF - 31: 60RDF - 41: 100RDF - 51: 150
D 7540
30/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Throttle valve andthrottle check valvetype CQ, CQR, CQV
■ Screw-in valve
– Tool adjustable
2: 700 2: 50 D 7713
Throttle andshut-off valvetype AV, AVT, CAV
■ Single valve for pipe connection■ Screw-in valve
– Tool adjustable, xed– Manual, adjustable
AV - 2: 500AV - 3: 400
CAV - 1: 500CAV - 2: 500
AVT - 6: 630AVT - 8: 630AVT - 10: 630AVT - 12: 630
AVM - 8: 500AVM - 8L: 315
AV - 2: 40AV - 3: 100
CAV - 1: 15CAV - 2: 25
D 7690D 4583D 7711
2.4.2 Flow control valves
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Flow control valvetype SF, SD, SK
■ Single valve for pipe connection■ Manifold mounting valve
– Mechanical
315 3: 604: 905: 130
D 6233
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 31/65
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Flow control valve(drop-rate brakingvalve)type SB, SQ, CSJ, DSJ,SJ
■ Single valve for pipe connection■ Screw-in valve
– Fixed– Adjustable
SB, SQ, DSJ, SJ:315
CSJ: 420
SB, SQ 0: 15SB, SQ 1: 35SB, SQ 2: 67SB, SQ 3: 150SB 4: 250SB 5: 400
CSJ: 2DSJ: 21SJ: 15
D 6920D 7395D 7736D 7825
Flow control valvetype SR2, SR3
■ Manifold mounting valve■ Screw-in valve
– Hydraulic
06: 32008: 350
06: 3508: 13.5
D 6402D 6403D 6404D 6440D 6441
2.4.3 Proportional ow control valves
Type Version/adjustability pmax
(bar)Qmax
(lpm)Document
Proportionalow control valvetype SE, SEH
■ Single valve for pipe connection■ Manifold mounting valve
– Solenoid
315 SE 3: 50SE 4: 90
SEH 2: 36SEH 3: 50SEH 4: 90SEH 5: 120
D 7557/1
Proportionalow control valvetype PSR2, PSR3
■ Screw-in valve
– Solenoid
10: 210 10: 30 D 6390D 6391
32/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
2.4.4 Flow dividers
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Flow dividertype TQ
■ Single valve for pipe connection■ Manifold mounting valve
350 2: 703: 704: 1205: 200
D 7381
2.5 Check valves
2.5.1 Check valves
Type Design pmax
(bar)Qmax
(lpm)Document
Check valvetype RK, RB, RC, RE,ER
■ Insert valve■ Plug-in valve■ Combination with housing for pipe
connection
RK - 0: 700RK - 1: 700RK - 2: 700RK - 3: 500RK - 4: 500RK - 5: 500RK - 6: 420RK - 7: 420RB - 0: 700RB - 1: 700RB - 2: 700RB - 3: 500RB - 4: 500RC - 1: 700RC - 2: 700RC - 3: 500
RE - 0: 500RE - 1: 500RE - 2: 500RE - 3: 450RE - 4: 400
ER - 01: 500ER - 11: 500ER - 12: 500ER - 13: 500ER - 21: 500ER - 31: 500ER - 41: 400
RK - 0: 8RK - 1: 20RK - 2: 50RK - 3: 80RK - 4: 120RK - 5: 240RK - 6: 400RK - 7: 620RB - 0: 8RB - 1: 20RB - 2: 50RB - 3: 80RB - 4: 120RC - 1: 20RC - 2: 35RC - 3: 60
RE - 0: 12RE - 1: 25RE - 2: 40RE - 3: 70RE - 4: 120
ER - 01: 6ER - 11: 12ER - 12: 15ER - 13: 15ER - 21: 30ER - 31: 65ER - 41: 120
D 7325D 7555 RD 6969 RD 7445
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 33/65
Type Design pmax
(bar)Qmax
(lpm)Document
Check valvetype CRK, CRB
■ Screw-in valve CRK - 1: 500CRK - 2: 500CRK - 3: 500
CRB - 1: 500CRB - 2: 500
CRK - 1: 30CRK - 2: 50CRK - 3: 80
CRB - 1: 20CRB - 2: 30
D 7712
2.5.2 Releasable check valves
Type Design / actuation pmax
(bar)Qmax
(lpm)Document
Releasablecheck valvetype CRH, RHC
■ Screw-in valve
– Hydraulic
CRH - 1: 500CRH - 2: 500CRH - 3: 500
RHC - 1: 700RHC - 2: 700RHC - 3: 700RHC - 4: 500RHC - 5: 500RHC - 6: 600
CRH - 1: 20CRH - 2: 30CRH - 3: 55
RHC - 1: 8RHC - 2: 15RHC - 3: 55RHC - 4: 100RHC - 5: 150RHC - 6: 200
D 7712D 7165
Releasablecheck valvetype HRP
■ Manifold mounting valve
– Hydraulic– Electro-hydraulic
HRP - 1: 700HRP - 2: 700HRP - 3: 500HRP - 4: 500HRP - 5: 500HRP - 7: 500
HRP - 1: 20HRP - 2: 35HRP - 3: 50HRP - 4: 80HRP - 5: 140HRP - 7: 400
D 5116
Releasablecheck valvetype RH, DRH
■ Single valve for pipe connection■ Manifold mounting valve
– Hydraulic
RH - 1: 700RH - 2: 700RH - 3: 500RH - 4: 500RH - 5: 500
DRH - 1: 500DRH - 2: 500DRH - 3: 400DRH - 4: 400DRH - 5: 400
RH - 1: 15RH - 2: 35RH - 3: 55RH - 4: 100RH - 5: 160
DRH - 1: 16DRH - 2: 30DRH - 3: 60DRH - 4: 90DRH - 5: 140
D 6105D 6110
34/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Design / actuation pmax
(bar)Qmax
(lpm)Document
Check valvetype GRV
■ Manifold mounting valve
– Hydraulic
R10: 350
Z07: 350Z10: 350
ZP04: 320ZP06: 250ZP10: 250
R10: 80
Z07: 30Z10: 60
ZP04: 20ZP06: 40ZP10: 80
D 6399D 6432D 6433D 6434D 6435D 6436
2.5.3 Line rupture protection valve, shuttle valves
Type Design / adjustability pmax
(bar)Qmax
(lpm)Document
Line rupture protectionvalvetype LB
■ Screw-in valve■ Combination with housing for pipe
connection
– Tool adjustable, xed
1: 5002: 5003: 5004: 5005: 300
1: 252: 503: 804: 1605: 250
D 6990
Shuttle valvetype WV, WVC
■ Single valve for pipe connection■ Screw-in valve
WV - 6 S: 700WV - 8 S: 700WV - 10 S: 500WV - 12 S: 500WV - 16 S: 500WV - 18 L: 315
WVC - 1: 315WVC - 11: 500
WVE - 2: 500
WVH - 11: 700
WV - 6 S: 6WV - 8 S: 15WV - 10 S: 25WV - 12 S: 40WV - 16 S: 100WV - 18 L: 160
WVC - 1: 6WVC - 11: 6
WVE: 25
WVH - 11: 3
D 7016
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 35/65
2.5.4 Servo-suction and pre-ll valves
Type Design / actuation pmax
(bar)Qmax
(lpm)Document
Check valve and pre-llvalve type F
■ Valve in intermediate ange version
– Hydraulic
25: 40032: 40040: 40050: 40064: 30081: 400101: 300126: 400161: 400200: 320
25: 10032: 16040: 25051: 48063: 63064: 76081: 1200101: 1920126: 3000161: 4800200: 7000
D 6960
Servo-suction valvetype NSV
■ Single valve for manifold mounting■ Insert valve
– Hydraulic
32: 32050: 320 75: 320100: 320
32: 15050: 30075: 500100: 900
D 6368
36/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
3 Electronics
3.1 Mobile controllers
Type Nomenclature / design Features Document
Mobile controllertype ESX
■ Mobile controller■ Base unit with expansion PCBs■ I/O module
■ Freely programmable mobile controller■ Programmable in C, Logi.CAD, Codesy■ Extensive software library dedicated to
hydraulic systems■ Simple parametrization of inputs and
outputs■ CAN bus, Ethernet, LIN interface
ESX-3CMESX-3CSESX-3IOSESX-4CS-GW
Mobile controllertype CAN-IO 14+
■ Compact controller/IO module ■ CAN bus and RS232 interface■ Simple parametrization of all inputs
and outputs■ Easy to program with HAWE eDesign©■ Compact design
D 7845-IO 14
Telemetry moduletype TCG-4
■ Data and connectivity module ■ Freely programmable Linux platform■ 4G/LTE, WiFi, CAN, Bluetooth,
Ethernet interface■ GPS, Glonas, Beidou, Galileo receiver■ Digital and analogue inputs■ Extensive software libraries■ 8 GB internal memory■ Extensive tool chain for data
visualization and analysis
TCG-4
3.2 Proportional ampliers
Type Nomenclature/version Features Document
Proportionalamplifiertype EV2S-CAN,EV2S-BT
■ Line connector ■ CAN bus, Bluetooth (optional)interface
■ Easy commissioning■ Current-controlled PWM outputs■ Functions optimized to match
HAWE valves■ Mounted directly on solenoid valve■ Easy to program with HAWE eDesign©■ LEDs for status monitoring
D 7818/1
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 37/65
Type Nomenclature/version Features Document
Proportionalamplifiertype EV
■ Module■ Card
■ Easy commissioning■ Current-controlled PWM outputs■ Functions optimized to match
HAWE valves■ Installation in switch cabinet
D 7817/2D 7831 DD 7831/2
3.3 Sensors
Type Nomenclature / design Features p max
(bar)Document
Electronic pressuretransducertype DT
■ Screw-in version ■ Plastic or stainless steelhousing
■ Accuracy class 1%■ Analogue output signal
(4 to 20 mA, 0 to 5 VDC,0 to 10 VDC)
■ M12 male connector■ G1/4 A pressure connection
1002504006001000
D 5440 T/1D 5440 T/2
3.4 Pressure switches
Type Nomenclature/version Features pmax
(bar)Document
Pressure switchtype DG 1, DG 3
■ Manifold mounting■ Screw-in version■ Pipe connection
■ Compact design■ Integrates with HAWE modular
system■ Switching current up to 2 A■ Available as N/O or N/C
contact version
600700
D 5440
Electronic pressureswitchtype DG 51E, DG 6,DG 7
■ Screw-in version ■ IO-link capable■ Integrates with HAWE modular
system■ Two separately adjustable
switching points■ Optical switching position
monitoring■ M12 male connector■ G 1/4 A or G 1/4 I
pressure connection
100250400600
D 5440 E/2D 5440 FD 5440 G
38/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
3.5 Line connectors
Type Nomenclature / design Features Document
Line connectortype MSE
■ Line connector
– With rectifier circuit– With clamp diode– With LED– With economy circuit
■ Simple installation■ Energy savings during continuous
operation■ Use of HAWE valves in AC grids
D 7163D 7813D 7833/1
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 39/65
4 Cylinders and motors
4.1 Motors
Type Nomenclature / design pmax
(bar)Vmax
(cm3/rev)Document
Axial piston motortype M60N
– Optimized power-to-weight ratio– High speed capacity– Slim design– Quiet operation over the complete
speed range– Different shaft and ange versions
Nominal pressure/peak pressure:350/400
010: 9.6012: 12.6017: 17.0025: 25.4034: 34.2040: 41.2047: 47.1056: 56.7064: 63.5084: 83.6090: 90.7108: 108.0130: 130.0
D 7960 M
4.2 Hydraulic cylinders
Type Nomenclature / design pmax
(bar)HStroke
(mm)Document
Linear actuatortype LV
■ Double-acting with differential piston■ for pipe connection M8x1■ Internal thread on rod side and bottom
side
– Piston diameters 20, 25, 32 and 40 mm– Stroke up to 40 to 500 mm
160 500 D 6053
4.3 Clamping cylinders
Type Nomenclature/version pmax
(bar)HStroke
(mm)Document
Hydraulic clamptype HSE, HSA
■ Screw-in version■ Manifold mounting
HSE - 12: 500HSE - 16: 500HSE - 20: 500HSE - 24: 500
HSA - 32: 500HSA - 40: 500
HSE - 12: 8HSE - 16: 12HSE - 20: 20HSE - 24: 20
HSA - 32: 20HSA - 40: 25
D 4711
40/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
5 Accessories
5.1 Memory
Type Design / piston diameter p max
(bar)Nominal volume(dm3)
Document
Diaphragm accumulatortype AC
■ Screw-in version 13: 50040: 400202: 250603: 330725: 2501002: 2101035: 3501414: 1402001: 1002002: 2502035: 3502825: 2503225: 210
13: 0.0140: 0.04202: 0.16603: 0.60725: 0.081002: 1.001035: 1.001414: 1.402001: 1.952002: 1.902035: 1.952825: 2.803225: 0.32
D 7571D 7969
Piston type accumulatortype HPS
■ In-line installation
– 50 ... 180 mm
350 0.1 ... 40.00 D 7969 HPS
5.2 Filter
Type Nomenclature/version Features p max
(bar)Document
Pressure ltertype PFM
■ Pressure lters ■ Energy-efcient thanks to lowow resistances
■ Long change intervals thanksto high loading capacity
■ Easy, clean lter elementchange
250 K PFM
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 41/65
5.3 Fittings
Type Nomenclature / design Features p max
(bar)Document
X84 screw ttings ■ Screw-in version■ Version for
pipe connection
■ Compact design■ Integrates with HAWE modular
system■ Operating pressures up to 700
bar
350 ... 700 D 7077
Hose linetype H3 and H4
■ Nominal diameter 3 or 4mm
■ Various connections(banjo bolt, quick couplerand others)
■ Sturdy with PA/PUR mantle ■ 280 bar D 6027
42/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
6 System solutions
6.1 Hydraulic locking systems
Type Nomenclature/version Fatigue load(N)
HStroke
(mm)Document
Hydraulic lockingsystemtype LE 25/32
■ Lock to prevent retracting/extending■ DIN EN 13814:2005/
ISO 17842-01:2015/ASTM 2291-15■ TÜV-SÜD component certificate
(acc. to material number)
3,700 ... 10,500 80 ... 150 D 6052
6.2 Press control systems
Type Nomenclature/version pmax
(bar)Vmax
(lpm)Document
Press control systemtype SAKB
■ Compact block
– Electro-proportional
280 60 D 6335
Press control systemtype SPVM
■ Pump power pack with pressvalves
■ With internal gear pump, pressureltering and coupling
– Electro-proportional
320 60 D 6338
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 43/65
Type Nomenclature/version pmax
(bar)Vmax
(lpm)Document
Press control systemtype MACB
■ Cylinder block■ Servo-suction valve integrated cylinder
block
– Electro-proportional
320 06: 3010: 100
D 6334
Press control systemtype SAMB
■ Cylinder block■ Servo-suction valve mounted directly
on cylinder base
– Electro-proportional
06: 32010: 320
06: 8010: 200
D 6336D 6337
Press control systemtype ePrAX© modular
■ Cylinder block and ServoPowerModule■ With integrated pressure ltering
– Speed-controlled
320 06: 3010: 100
D 6340
Press control systemtype ePrAX© basic
■ Cylinder block■ With integrated pressure ltering
– Speed-controlled
320 06: 3010: 10025: 200
D 6339
Press control systemtype ePrAX© max
■ Electro-hydraulic drive
– Speed-controlled
15: 320 bar19: 320 bar
15: Working speed 10 mm/s15: Top speed = 230 mm/s19: Working speed 10 mm/s19: Top speed = 230 mm/s
D 6341
44/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Nomenclature/version pmax
(bar)Vmax
(lpm)Document
Press control systemtype ePrAX© control
■ Electro-hydraulic drive (withoutcylinder)
– Speed-controlled
320 15: 22.5 l/min19: 36.5 l/min
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 45/65
7 Appendix
7.1 Hydraulic uids – notes for selection
The operation behavior of a hydraulic system mainly depends on the quality of the utilized hydraulic uid.
The hydraulic uid should essentially be selected according to the operating conditions, such as
■ Temperature (see viscosity classes)■ Nomenclature (possible ban on certain hydraulic uids due to undesired reactions with metals, seals etc.)■ Usage type (e.g. environmentally compatible hydraulic uids)■ Surroundings (use of existing hydraulic uids)
7.1.1 Overview of temperature and viscosity
Temperature range: Surrounding area: -40 to +80°CExceptions:Air-powered pumps type LP (+5 to +80°C)Hydraulic uid: -25 to +80°CPlease observe viscosity range and any additional restrictions.Compact hydraulic power packs type A, hydraulic locking systems type LE 25/32,directional seated valves type SP3, linear actuator type LV, valve bank type SLC1,valve bank type TLC3 and hose lines type H3(-10°C to +60°C)
Start temperature: Down to -40°C permissibleObserve start viscosities as long as the steady-state temperature is at least 20Khigher for subsequent operation!Biologically degradable or re inhibiting hydraulic uids generally not over max.+60...+70°C.
Viscosity range: Min. approx. 4 mm2/s,Max. approx. 1500 mm2/sOptimal operating range approx. 10...500 mm2/s
46/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
7.1.2 Mineral oils
Hydraulic uid Characteristics Unusual features / restrictions
■ Hydraulic oils HLP(DIN 51524-2)
Mineral oil with additives improvingcorrosion, oxidation and wearprotection
Common hydraulic uid
■ Hydraulic oils HL(DIN 51524-1)
Mineral oil without wear protectingadditives
Not suitable for any types of gear pump due tothe lack of wear protection additives.
■ No pumps and power packs with gear pumpstype RZ, Z
■ No compact hydraulic power packs HC, KA,MP, MPN, HK, HKL
■ Hydraulic oils HVLP(DIN 51524-3)
Mineral oil with same additives asHLP, but with increased viscosityindex for use in higher temperatureranges
The viscosity index correctors have a negativeeffect on the shear strength (viscosity lossapprox. 30% when loaded), demulsifyingbehaviour and air release characteristics, forexample.Only use if required due to temperature range.Oil manufacturer must be consulted!
■ Unalloyed oils H, e.g.- Lubricating oils (DIN 51524-1)- White oils (e.g. NSF H1)
Mineral oil without additives Due to lack of additives only suitable forsystems in the standby mode (S2 or S3 mode)(low lubricity). White oils are mostly used insystems with possible contact with foodstuffs.
■ Hydraulic oils PAO (testedfor compliance withDIN 51524-1 and DIN 51524-2)
mineral oil-free synthetic oil withadditives improving corrosion,oxidation and wear protection
See information on hydraulic oils HVLP
■ Special uidsin the aviation sector(MIL H-5606)in the marine sector(NATO H 540)
Mineral oils are based as a rule onnaphtenic oil with wide temperaturerange
Seals made of uor rubber FPM might berequired, depending on hydraulic uid.Consult the oil manufacturer!
■ Other mineral oilsEngine oils HDATF automatic transmission uid(AQ A, sufx A)DieselTest oil for diesel injection pumptest
Mineral oils which basically weredeveloped for other applicationpurposes
More or less suitable hydraulic uids. Payattention to the presence of oxidation andcorrosion protection as well as material compati-bility (above all in relation to the seals).Attention: increased leakage with directionalspool valves. Oil manufacturer must be consult-ed!
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 47/65
7.1.3 Environmentally compatible hydraulic uids ISO 15380
Hydraulic uid Characteristics Unusual features / restrictions
■ Seed oil type HETG Fluids based on seed oils e.g. rapeor sunower with additives showonly low temperature resistance(< 60...70°C)
Not suitable for compact power packs typeHC, KA, MP, MPN, HK, HKL, all valves with wetarmature solenoids as well as control systemsutilizing many throttles. HETG uid show atendency to gum, aging, and sticking at highertemperatures (> 60...70°C). Their use should beavoided!
■ Polyethyleneglycol HEPGPEG-Polyethylene (may be solvedin water)PPG-Polypropylene (can't besolved in water)
Fluids based on polyethylene glycol(PEG)Properties similar to mineral oilwith regard to lifetime, lubricityand pressure resistance
No restrictions with regard to the operationbehavior, but it
■ Is harmful to standard enamel (does not applyto two-pot enamel)
■ Will clog cellulose lters (use only glass beror metallic lters)!
■ Shows bad lubrication characteristic withmaterial pairings steel / light alloy or brass
■ No pumps and power packs with gear pumpstype RZ and Z
■ Do not use compact hydraulic power packstype HC, KA, MP, MPN, HK, HKL
■ No connection blocks with return line ltertype A.F.., AF, BF, EF, FF
■ Synthetical ester HEES(carbon acid ester, diester,polyester)
Similar qualities i.e. lifetime,lubricating characteristics andpressure resistance, like mineral oil
No restrictions with regard to the operationbehavior. Contact with PVC should be avoided.
48/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
7.1.4 Flame-resistant hydraulic uids ISO 12922
Hydraulic uid Characteristics Unusual features / restrictions
■ HFA(pressurized water, emulsions)
Oil in water emulsion, (water content > 80%) max. temp. range approx. 60°C
There is the danger of corrosion and cavitationdue to the high water content, only use devicesspecially constructed for this purpose (radialpiston pumps type R, directional seated valvestype G) Max. pump pressure 50...60% (danger ofcavitation) minimum content of mineral oil > 4%
■ Do not use compact hydraulic power packs HC,KA, MP, MPN, HK, HKL – risk of short circuit
■ No paper lters – risk of blockageNo connection blocks with return line ltertype A.F.., AF, BF, EF, FF
■ HFC Diluted (poly) glycol solution (water content > 35%) max. temp. range up to approx.60°C
No restrictions with regard to the operationbehavior, but it
■ Incompatible with zinc■ No paper lters – risk of blockage
No connection blocks with return line ltertype A.F.., AF, BF, EF, FF
■ Will clog cellulose lters (use only glass beror metallic lters)!
■ Shows bad lubrication characteristic withmaterial pairings steel/light alloy or brass
■ No compact hydraulic power packs HC, KA,MP, MPN, HK, HKL
■ HFDHFDR phosphoric esterHFDU polyolester
Fluids without water content,properties similar to mineral oil
Normal operation possible Restrictions:
■ Requires seals out of FPM (FKM)(see also section "Seals")
■ Oil manufacturer must be consulted!
7.1.5 Special uids
Hydraulic uid Characteristics Unusual features / restrictions
■ AT-Brake uid Brake uid based on glycol (DOT 4)
No restrictions with regard to the operationbehaviour, but devices must be equipped withEPDM or SBR seals (see "Seals" section)No compact hydraulic power packs type HC, KA,MP, MPN, HK, HKL
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 49/65
Viscosity grade selection
Of the 18 viscosity grades (ISO VG) listed in the standard "Industrial liquid lubricants; ISO viscosity classification" (DINISO 3448), the range ISO VG10 to ISO VG68 is relevant for hydraulic systems. The number after "ISO VG" corresponds to thenominal viscosity at a reference temperature of 40°C. The temperature behaviour displayed in the diagram corresponds tothat of mineral hydraulic oils. The characteristic curve increase of HVLP and the environmentally compatible hydraulic uids isatter, indicating that the temperature effect is lower.
Due to manufacturer-related differences, the following benchmark gures are to be claried and compared with the permissi-ble viscosity ranges:
■ Viscosity at 40°C■ Viscosity at the lowest (estimated or demanded) temperature■ Viscosity at the highest (presumed, required) temperature
(to guarantee a good seal life ≤ 80°C!)
7.1.6 Temperature / viscosity curve
1 Optimum range2 Reference temperature
DIN ISO 3448
Guide lines for selection■ VG10, VG15
Systems intended for short time operation or use in theopen or for clamping devices.Systems intended for continuous operation(for use in the open, operation in winter only)
■ VG22, VG32General use(when used outside, only summer operation)
■ VG46, VG68Systems in closed rooms atambient temperatures up to 40°C or tropical conditions
50/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Purity of the hydraulic uid and correct ltering
Fine contamination (e.g. debris and dust) or contamination in the macro range (e.g. wear debris, rubber particles from hosesand seals) may significantly impair the function of a hydraulic system.
Maintain the following hydraulic uid purities (assuming a thorough ushing has taken place prior to the date of commission-ing):
Recommended purity of thehydraulic uid
ISO 4406
Recommended lter neness
Devices Note
21/18/15...19/17/13 β16...25 ≥ 75 Radial piston and gearpumps, valves, cylinders(use in general mechanicalengineering)
20/17/14...18/15/12 β6...16 ≥ 75 Prop. pressure and owcontrol valves
19/17/14 β6...16 ≥ 75 Variable displacement axialpiston pumps
The purity degree of the hydraulicuid is especially important forthe repeatability accuracy withproportional valves.It should be noted that newhydraulic uid "from the barrel"does not necessarily full thehighest cleanliness requirements.
Lower limits must be applied for pressure above 250 bar
Service life of the hydraulic uid
The aging of hydraulic uids is caused by shearing processes, cracking induced by high temperatures (gumming), mixing with(condensed) water or reaction with other materials (e.g. metal) in the system (sludging). A major factor for the service lifeof the uid is beside the anti-shear additives of the uid the lay-out of the system e.g. tank size, operation temperature,number and design of throttling sections.
Besides the properties of the hydraulic uid itself (e.g. due to additives for high shear stability), the design of the hydrauliccontrol system (e.g. tank size, steady-state temperature, number and type of throttling points) has a major inuence on this.
The following points are to be noted:
■ Service temperature in the tank < 80°C(mineral oils, hydraulic uids with low water content) Avoid higher temperatures – Service life reduction – (+10Kcorresponds to half service life)
■
Rotational conditions of hydraulic uid
- Approx. 0.2...0.4/min for conventional hydraulic power packs- Approx. ...1/min in mobile hydraulics- Approx. ...4/min for compact hydraulic power packs in standby or load/no load operation
■ Control of the hydraulic uid on a regular base (uid level, contamination, coloring index, neutralization value etc.)■ Change of the hydraulic uid on a regular base (depending on uid type and application conditions)
Guideline:- approx. 4000 ... 8000 h (mineral oil)- approx. 2000 h (other hydraulic uids)- or at least annuallyTake into account notes of the uid manufacturer!
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 51/65
Changing the hydraulic uid
Do not mix different types of hydraulic uids! This may lead to undesirable chemical reactions causing sludge, resinificationetc.
The relevant manufacturers should be consulted when switching between different hydraulic uids. In all cases, the wholehydraulic system should be thoroughly ushed.
Interaction with seals
Any question about the compatibility with seal material should be settled with the uid manufacturer always before usinga certain hydraulic uid (except mineral oil and synthetic esters). A rough overview is given in the table at the start of thissection. HAWE utilizes seals made of the following materials as standard:
■ NBR (acrylonitrile rubber, e.g. Bunan, Perbunan) or HNBR (hydrated NBR).
Some devices are available on request with seals made of:
■ FPM FPM (also FKM, uor rubber) e.g. for uids type HFD- The coding ...-PYD should be added to the coding for HAWE devices, e.g. WN1H-G24-PYD
■ EPDM (ethylen propylen rubber) or SBR (styrene-butadiene rubber)- The coding ...-AT should be added to the coding for HAWE devices, e.g. WN1H-G24-AT (for brake uid)
NOTE
■ For the seal specification coding -PYD and -AT, the maximum operating pressure is limited to 250 bar.■ This limitation conditionally applies to other values specied in the relevant product documentation.
Storing hydraulic uids and hydraulic components
Storage conditions for hydraulic components depend primarily on the following factors:
■ seals utilised, moistening with oil during the factory functional test
The storability of rubber materials is generally inuenced by the following factors:
■ Warmth, light, humidity, oxygen, ozone
As far as possible, components should be de-energised and without deformation when stored. A storage temperature range of15 to 20°C is optimum. Relative humidity approx. 65% (+-10%). Exposure to direct sunlight or a light source with strong UVrays should be avoided.
Ozone-producing equipment (electric motors, high-voltage equipment) among other things must not be present in the storageroom.
If seals are packaged in plastic bags, these should not contain any plasticisers and, if necessary, should be impermeable toUV light.
Details on the storage of elastomers are also available in the following standards:DIN 7716/BS4F68:2012, MIL-HDBK-695, SAE ARP 5316, SAE AS 1933, DIN 9088.
Hydraulic uids can be stored for an unlimited period in sealed containers supplied by the manufacturer, as no chemicalreactions take place. The presence of atmospheric oxygen, dust and moisture can lead to more or less rapid oxidation andresinification, depending on the type of oil and its additives.
A dark room with virtually constant temperature and humidity is recommended for storage of hydraulic components. The partsshould be kept in a plastic bag to protect them from dust and continuous air exchange.
A functional test (manual override, dry switching) should be carried out at least once a year to ensure operation.Safety-related components: A six-monthly functional test on site and a regular factory inspection including seal replacementevery 2 years.
When the hydraulic components are stored as described above, the risk of corrosion is low. Most external parts of HAWEcomponents are coated with a protective layer (galvanised, nitrided) and moistened with oil.
52/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
7.2 Formulas and units
7.2.1 Conversion table
Marking Unit Factor X Unit
10 bar
1 MPa 10 bar
1 bar
Pressure p
1 psi 0.07 bar
1 NForce F
1 lbf 4.45 N
1 in 25.4 mmLength, travel, stroke l, s, h
1 ft 304.8 mm
Torque M 1 Nm
Power P 1 PS, 1 hp 0.74 kW
1 ft2 92903 mm2Area A
1 in2 645.16 mm2
1 ft3 28.92 l
1 in3 l
1 UK gal 4.55 l
Volume V
1 US gal 3.79 l
Temperatures T, 5 (°F-32)/9 1 °C
Weight m 1 lb 0.45 kg
Cinematic viscosity 1 cST 1
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 53/65
7.3 Contact ofces and representatives
Germany
HeadquartersHAWE Hydraulik SEEinsteinring 1785609 Aschheim/MunichPostfach 115585605 AschheimGermanyPhone +49 89 37 91 00 - 1000e-mail: [email protected]
Filderstadt ofceFelix-Wankel-Str. 4170794 FilderstadtPhone +49 89 37 91 00 - 5000e-mail: [email protected]
Freising ofceKulturstr. 4481653 FreisingPhone +49 89 37 91 00 - 43 80e-mail: [email protected]
HAWE Micro Fluid GmbHBorsigstraße 1193092 BarbingPhone +49 89 379 100 6000e-mail: [email protected]
Hennef ofceBonner Str. 12 d53773 HennefPhone +49 89 37 91 00 - 52 00e-mail: [email protected]
Kassel ofceFrankfurter Str. 229 b34134 KasselPhone +49 89 37 91 00 - 51 00e-mail: [email protected]
Norderstedt ofceWerkstraße 622844 NorderstedtPhone +49 89 37 91 00 - 53 00e-mail: [email protected]
54/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
International
For countries that are not listed:
HAWE Hydraulik SEEinsteinring 1785609 Aschheim/MunichGermanyPhone +49 89 37 91 00-0, -12 81e-mail: [email protected]
AngolaZANANCHO HIDRÁULIC de ANGOLAEstrada Direita do Zango, Polo Indústrial de Viana / ZonaNovaViana, AngolaPhone +244 222 200 26 54e-mail: [email protected]
ArgentinaFLUTECNO, S.R.L.Avda. Belgrano, 615, 1º Of. GC1092AAG Buenos Aires, ArgentinaPhone +54 11 43435168e-mail: [email protected]
AustraliaHawe Hydraulics Australia PTY Ltd5/ 83-85 Montague StreetNorth Wollongong NSW 2500PO Box 618 Fairymeadow 2519Phone +61 242 257 222e-mail: [email protected]
AustriaHAWE Österreich GmbHEichenstr. 1AA – 3385 GerersdorfPhone +43 2749 74000-0e-mail: [email protected]
BelgiumDoedijns B.V.Bleiswijkseweg 51NL-2712 PB ZoetermeerPhone +31 88 091 2600e-mail: [email protected]
Bosnia and Herzegovinasee Slovenia: HAWE Hidravlika d.o.o.
BrazilHAWE Hydraulik SE Av. Raimundo Pereira de Magalhães, 555, Cj 163A CEP 05092-040 Vila Anastacio Sao Paulo - SP Phone +55 11 2657 4672 Mob.: +55 11 99136 5953 e-mail: [email protected]
HIDRACOMP, LTDARua Dr.Edgard Magalhaes Noronha, 704BR-03480-000 Vila Nova York, Sao PauloPhone +55 11 6721-1113e-mail: [email protected]
BulgariaEurofluid Hydraulik Bulgaria OODVojeli Str. 3BG-6100 KazanlakPhone +359 431 634 77, +359 431 621 73e-mail: [email protected]
CanadaHAWE North America, Inc.9009-K Perimeter Woods DriveCharlotte, NC 28216Phone +1 704 509-1599e-mail: [email protected]
Hydra-Fab Fluid Power Inc.3585 Laird Road, Unit 5Mississauga, ON L5L 5Z8Phone +1 905-569-1819e-mail: [email protected]
ChileMARCO Industrial SpA.Los Gobelinos 2584Renca, Santiago, ChilePhone +56 2 2782 4413e-mail: [email protected]
ChinaHAWE Oil-Hydraulic Technology (Shanghai) Co., Ltd.155 Jindian Road201206 PuDong/Shanghai, P.R. ChinaPhone +86 21 589 996 78e-mail: [email protected]
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 55/65
ColombiaseeSpain: HAWE HIDRAULICA, S.L.U.
Costa RicaseeSpain: HAWE HIDRAULICA, S.L.U.
CroatiaseeSlovenia: HAWE Hidravlika d.o.o.
Czech RepublicEurofluid-Hydraulik CR, s.r.o.Chrášt’any 9CZ-270 01 Knezeves u RakovníkaPhone +42 031 358 262 0, +42 031 353 101 6, +42 031 358261 5, +42 031 353 101 7e-mail: [email protected]
DenmarkFritz Schur Teknik ASRoskildevej 8-10DK-2620 AlbertslundPhone +45 70 20 1616e-mail: [email protected]
DubaiDoedijns Middle East and Africa FZEWarehouse: G1-16, Ajman Free ZoneDubai UAEPO Box 16076Phone +971 6 569 0639e-mail: [email protected]
EcuadorseeSpain: HAWE HIDRAULICA, S.L.U.
EgyptEgyptian Hydraulic Engineering22 Saudi Buildings Al - Sawah 11281Cairo, EgyptPhone +20 224 5018-90e-mail: [email protected]
FinlandHAWE Finland OyKoskelontie 15FIN-02920 ESOOOPhone +358 10 82126-00e-mail: [email protected]
France HAWE Hydraulik France S.A.S.2 Rue Parc des Vergers, Parc d’activités des VergersF-91250 TIGERYPhone +33 169 471 010e-mail: [email protected]
GreecePangakis G. & I. AE46 Paparrigopoulou, & LassaniGR-12132 PERISTERIPhone +30 210 88 10 750e-mail: [email protected]
Hong Kongsee Singapore: HAWE Hydraulik Singapore Pte. Ltd.
HungaryJankovits Engineering Kft.Juharfa u. 3HU-9027 Györ Ipari ParkPhone +36 96 512 060e-mail: [email protected]
IndiaHAWE Hydraulics Pvt. Ltd.No. 68, Industrial Suburb 2nd Stage, YeshwanthpurBangalore 560 022, IndiaPhone +91 80 419 520 00e-mail: [email protected]
IndonesiaseeSingapore: HAWE Hydraulik Singapore Pte. Ltd.
Iran Rexsun Parsian Ltd.Rexsun building No.26 , 9th Alley,Miremad St. Motahari Ave. Tehran – IRAN+98 21 885 156 10 / 317+98 21 885 156 40www.rexsun.ir
IraqseeDubai: Doedijns Middle East and Africa FZE
56/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
IsraelLYA Hydraulics & Pneumatics Ltd.9 Lev Pesach St. North Industrial ZoneIL-71293 Lod, IsraelPhone +97 27 32 57 00 00e-mail: [email protected]
ItalyHAWE-Italiana S.r.l.Via C. Cantù, 8I-20092 Cinisello Balsamo (Milano)Phone +39 02 399 75-100e-mail: [email protected]
Japan HAWE Japan Ltd.2-2, Yoshimoto-cho, Nakagawa-kuJ-Nagoya, Aichi, 454-0825, JapanPhone +81 52 365-1655e-mail: [email protected]
JordanseeDubai: Doedijns Middle East and Africa FZE
KoreaHAWE Korea Co., Ltd.27, 1-gil, 4-sandan, Seobuk-gu, Cheon-an,Chungnam 31040, South KoreaPhone +82 41 585-3800e-mail: [email protected]
KuwaitseeDubai: Doedijns Middle East and Africa FZE
MacedoniaseeSlovenia: HAWE Hidravlika d.o.o.
MalaysiaseeSingapore: HAWE Hydraulik Singapore Pte. Ltd.
MéxicoseeSpain: HAWE HIDRAULICA, S.L.U.
MoroccoHYDRAUTECH-INDUSTRIE Service CommercialLos 209, Z.I. Zenata-Ain HarroudaMohammedia – Moroccoe-mail: [email protected]
New ZealandseeAustralia: Hawe Hydraulics Australia PTY Ltd
NorwayServi ASHaugenveien 10, Postboks 3230N-1402 SkiPhone +47 64 97 97 97e-mail: [email protected]
OmanseeDubai: Doedijns Middle East and Africa FZE
PeruMarco Peruana S.A.Av. Sáenz Pena 1439Callao PeruTel: +51 1 201 3800e-mail: [email protected]
PhilippinesseeSingapore: HAWE Hydraulik Singapore Pte. Ltd.
PolandRDL Hydraulics Sp. z o.o.Kaszubska 28PL-80-297 MiszewkoPhone +48 58 671 51 61e-mail: [email protected]
PortugalZANANCHO-SOC.COM.IMP.EXP.Lda Sr. Jorge Valente Estrada nacional 249-4, lote 6 Zona industrial Trajouce 2785-035 Sao Domingos Rana, Portugal Phone: +35 1214449800 e-mail: [email protected]
QatarseeDubai: Doedijns Middle East and Africa FZE
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 57/65
RomaniaS.C. Varitec Fluid S.R.L.Str. Fochistilor Nr.20550299 SibiuPhone: +40 369 409 083e-mail: [email protected]
RussiaHAWE Hydraulik SE Moscow Region Krasnogorsk District, Arkhangelskoe Village 4th km of the Ilinsky Highway, Building No. 8, ofce 517 RU-143420 Moscow Phone +7 495 922 20 08 e-mail: [email protected]
Saudi ArabiaDalil Al Souk Est.P.O. Box 5874 Riyadh 11432Saudi ArabiaPhone +966 11 4464 145e-mail: [email protected]
Serbia and Montenegrosee Slovenia: HAWE Hidravlika d.o.o.
SingaporeHAWE Hydraulik Singapore Pte. Ltd.24 Boon Lay Way, #01-65 Tradehub 21Singapore 609969, SingaporePhone +65 656 283 61e-mail: [email protected]
SlovakiaEurofluid Hydraulik SR s.r.o.Racianska 71 (Areal VUZ)SK-852 02 Bratislava 02Phone +42 12 49 10 22 66e-mail: [email protected]
SloveniaHAWE Hidravlika d.o.o.Ob Dragi 7SI-3220 ŠtorePhone +386 371 348 80e-mail: [email protected]
South AfricaWalch Engineering Co. (PTY) Ltd.16A Saligna StreetWiteld Ext 32Boksburg, 1459e-mail: [email protected]
SpainHAWE Hidráulica, S.L.U.Polig. Ind. Almeda, c/. del Progrés, 139-141E-08940 Cornella de Llobregat,Barcelona, SpainPhone +34 93 4751370e-mail: [email protected] (Spain)e-mail: [email protected] (Latin America)www.hawe.com
SwedenHAWE Hydraulik Sweden ABÅvägen 24, Gårdshus 1, vån 241251 GöteburgPhone +46 76 466 15 84e-mail: [email protected]
SwitzerlandHAWE-HYDRATEC AGDorfstrasse 37CH-6035 PerlenPhone +41 417 474 000e-mail: [email protected]
TaiwanHAWE Hydraulik Singapore Pte. Ltd. TaiwanNo.531, Guozhoung Rd., Dali Dist., Taichung City, Taiwan 41260Phone +886-4-24074093e-mail: [email protected]
Thailand Aerofluid Co. Ltd.169/4 - 169/5 Moo 1Rangsit-Nakornnayok RoadTambon LampakkudAmphoe Thanyaburi, Pathumthani, 12110Phone +66 257 729 99e-mail: [email protected]
58/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
The NetherlandsDoedijns B.V.Bleiswijkseweg 51NL-2712 PB ZoetermeerPhone +31 88 091 2600e-mail: [email protected]
TurkeyEntek Otomasyon Ürünlerli San. ve Tic. A.S.Mahmutbey Mah. Tasocagi Yolu Cad. No: 9 Entek PlazaBagcilar - Istanbul 34218Phone +90 850 201 4141e-mail: [email protected]
BTC Otomasyon ve Hidrolik Sistemler San.ve Tic.Ltd.StiTuzla Kimyacilar OSB Kristal Cad. No:22 PK: 34959Tuzla/IstanbulPhone +90 216 5933380e-mail: [email protected]
UkraineIzumrud Ltd.Dekabristov Str. 7UK-02121 Kiev, UkrainePhone +38 044 560-3367e-mail: [email protected]
United Arab EmiratesseeDubai: Doedijns Middle East and Africa FZE
United KingdomKoppen & Lethem Ltd.3 Glenholm Park, Northern Rd. Industrial Estate, NewarkUK-Nottinghamshire NG24 2EGPhone +44 163 667 679 4e-mail: [email protected]
UruguayseeSpain: HAWE HIDRAULICA, S.L.U.
USAHAWE North America Inc.9009-K Perimeter Woods DriveCharlotte, NC 28216Phone +1 704 509-1599e-mail: [email protected]
VietnamseeSingapore: HAWE Hydraulik Singapore Pte. Ltd.
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 59/65
7.4 Type index
Type Publication Table page
A Micro power unit series A 10: D 6025Micro power unit series A 065: D 6034
11
AC Miniature hydraulic accumulators, type AC: D 7571Diaphragm accumulator type AC: D 7969
40
ADC Pressure-reducing valve type ADC, ADM, ADME and AM: D 7458 25
ADM Pressure-reducing valve type ADC, ADM, ADME and AM: D 7458 25
ADME Pressure-reducing valve type ADC, ADM, ADME and AM: D 7458 25
ALZ Pressure valve with check valve type AL, AE and AS: D 6170 28
AM Pressure-reducing valve type ADC, ADM, ADME and AM: D 7458 25
AV Throttle valve and shut-off valve type AV: D 4583 30
AVT Shut-off valve type AVT and AVM: D 7690 30
BA Valve bank (nominal size 6) type BA: D 7788 17
BC Restrictor check valve type BC: D 6969 B 29
BE Restrictor check valve type BE: D 7555 B 29
BNG Valve bank type BNG: D 7788 BNG 18
BVE Directional seated valve type BVE: D 7921 22
BVG Directional seated valve type BVG 1 and BVP 1: D 7765 19
BVH Valve bank (directional seated valve) type BVH: D 7788 BV 20
BVP Directional seated valve type BVG 1 and BVP 1: D 7765 19
BWH Valve bank (directional seated valve) type BWN and BWH: D 7470 B/1 21
BWN Valve bank (directional seated valve) type BWN and BWH: D 7470 B/1 21
CAN IO 14+ Valve control type CAN-IO 14+: D 7845-IO 14 36
CAV Throttle valve and shut-off valve CAV: D 7711 30
CDK Pressure-reducing valve type CDK: D 7745 26
CDSV Pressure-dependent shut-off valve type CDSV: D 7876 28
CH Hand pump type CH: D 7147 CH 10
CLHV Load-holding valve type CLHV: D 7918-VI-CLoad-holding valve type CLHV: D 7918-VI-PIB
23
CLK Pressure-reducing valve type CLK: D 7745 L 26
CMV Pressure valve type CMV, CMVZ, CSV and CSVZ: D 7710 MV 24
CNE Pressure-controlled shut-off valve type CNE: D 7710 NE 27
CPU Compact power pack type CPU: D 8010 CPU 13
CQ Throttle valve and throttle check valve type CQ, CQR and CQV: D 7713 30
CQR Throttle valve and throttle check valve type CQ, CQR and CQV: D 7713 30
CQV Throttle valve and throttle check valve type CQ, CQR and CQV: D 7713 30
CR Switch unit type CR: D 7150 22
CRB Check valve type CRK, CRB and CRH: D 7712 33
CRH Check valve type CRK, CRB and CRH: D 7712 33
CRK Check valve type CRK, CRB and CRH: D 7712 33
CSJ Flow control valve type CSJ: D 7736 31
CSV Pressure valve type CMV, CMVZ, CSV and CSVZ: D 7710 MV 24
CVD 2/2-way cartridge valve type CVK, CVS, CVD: D 6452 20
60/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Publication Table page
CVK 2/2-way cartridge valve type CVK, CVS, CVD: D 6452 20
CVS 2/2-way cartridge valve type CVK, CVS, CVD: D 6452 20
CWS Directional spool valve bank type SWS: D 7951 16
DG Pressure switch type DG: D 5440 37
DK Pressure-reducing valve type DK, DZ and DLZ: D 7941 26
DLZ Pressure-reducing valve type DK, DZ and DLZ: D 7941 26
DMV Pressure-limiting valve type MV, SV and DMV: D 7000/1 24
DRH Releasable twin check valve type DRH: D 6110 33
DSJ Flow control valve type DSJ: D 7825 31
DSV Pressure controlled shut-off valves type DSV...: D 3990 28
DT Electronic pressure transducer type DT 2: D 5440 T/1 37
DV Pressure-limiting valve, pilot-controlled type DV, DVE and DF: D 4350 24
DZ Pressure-reducing valve type DK, DZ and DLZ: D 7941 26
EB Orice type EB: D 6465 29
ED Throttle valve and throttle check valve type ED, RD and RDF: D 7540 29
EDL Proportional directional spool valve type EDL: D 8086 18
EM Directional seated valve type EM and EMP: D 7490/1 22
EMP Directional seated valve type EM and EMP: D 7490/1 22
ePrAX© basic Control for CNC press brakes type ePrAX basic: D 6339 43
ePrAX© control 44
ePrAX© max Control for CNC press brakes type ePrAX max: D 6341 43
ePrAX© modular Control for CNC press brakes type ePrAX modular: D 6340 43
ER Check valve type ER and EK: D 7325 32
ESX Mobile controller type ESX-3CM: ESX-3CMMobile controller type ESX-3CS: ESX-3CSMobile controller type ESX-3IOS: ESX-3IOSMobile controller type ESX-4CS-GW: ESX-4CS-GW
36
EV1M Proportional amplifier type EV1M3: D 7831/2 38
EV2S-BT Proportional amplifier type EV2S: D 7818/1 36
EV2S-CAN Proportional amplifier type EV2S: D 7818/1 36
EV Proportional amplifier type EV22K5: D 7817/2 37
F Check valve and pre-ll valve type F: D 6960 35
FB Proportional pressure-reducing valve type KFB 01: D 6600-01 38
FG Throttle valve and throttle check valve type FG: D 7275 29
FXU Hydraulic power pack type FXU: D 6020 14
G Directional seated valve type G, WG and others: D 7300,Directional seated valve type G with interchangeable solenoid: D 7300-12
21
GRV Check valve type GRV (size 10): D 6399,Sandwich plates with PO check valve GKR (size 6): D 6432Sandwich plates with PO check valve GKR (size 10): D 6433Sandwich plates with PO check valve type GKR (size 4): D 6434Sandwich plates with PO check valve GKR (size 6): D 6435Sandwich plates with PO check valve GKR (size 10): D 6436
34
H Manual pump type H, HD and HE: D 7147/1 12
H Mini power unit series H 300, 350: D 6344Mini power unit series H 400, 410, 440: D 6345
12
H3 High Pressure Hose type H3/H4: D 6027 41
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 61/65
Type Publication Table page
H4 High Pressure Hose type H3/H4: D 6027 41
HAM 4/2-way and 4/3-way directional control valve type HAM, HBM, HCM: D 6450 15
HAL 4/2-way and 4/3-way directional control valve type HAL: D 6537 15
HBM 4/2-way and 4/3-way directional control valve type HAM, HBM, HCM: D 6450 15
HC Compact hydraulic power pack type HC and HCW: D 7900 12
HCM 4/2-way and 4/3-way directional control valve type HAM, HBM, HCM: D 6450 15
HCW Compact hydraulic power pack type HC and HCW: D 7900 12
HD Manual pump type H, HD and HE: D 7147/1 13
HE Manual pump type H, HD and HE: D 7147/1 10
HK Compact hydraulic power pack type HK 3: D 7600-3Compact hydraulic power pack type HK 4: D 7600-4
13
HKF Compact hydraulic power pack type HK 4: D 7600-4 13
HKL Compact hydraulic power pack type HKL and HKLW: D 7600-3L 13
HPS Piston type accumulators, type HPS: D 7969 HPS 40
HR Micro power unit series 4: D 6014Micro power unit series HR 080: D 6342Micro power unit series HR 120: D 6343
11
HRP Releasable check valve type HRP: D 5116 33
HS Micro power unit series HS 120: D 6347 11
HSA Hydraulic clamps type HSE and HSA: D 4711 39
HSE Hydraulic clamps type HSE and HSA: D 4711 39
HSF Directional spool valve type HSF: D 7493 E 16
HSL Directional spool valve type HSL: D 7493 L 16
IVN 2/2-way poppet valve type IVN 221, 222 (size 8): D 6405 21
IVS 2/2-way poppet valve type IVS (size 12): D 6534 21
K60N Fixed displacement axial piston pump type K60N: D 7960 K 9
K61N Variable displacement axial piston pump type V60N: D 7960 N 9
KA Compact hydraulic power pack type KA and KAW size 2: D 8010Compact hydraulic power packs type KA and KAW size 4: D 8010-4
12
KAW Compact hydraulic power pack type KA and KAW size 2: D 8010Compact hydraulic power packs type KA and KAW size 4: D 8010-4
12
LB Line rapture protection valves, type LB: D 6990 34
LHDV Load-holding valve type LHDV: D 7770 23
LHK Load-holding valve type LHK: D 7100 23
LHT Load-holding valve type LHT: D 7918 23
LP Hydraulic power pack type LP: D 7280 H 14
LV Shut-off valve type LV: D 7529 28
LV Cylinder type LV: D 6053 39
M60N Variable displacement axial piston pump type V30D: D 7960 39
MACB Control for CNC press brakes type MACB, MPLM: D 6334 43
MP Compact pump type MP: D 7200Compact hydraulic power pack type MP: D 7200 H
13
MPN Compact hydraulic power pack type MPN and MPNW: D 7207 13
MPNW Compact hydraulic power pack type MPN and MPNW: D 7207 13
MPW Compact pump type MP: D 7200Compact hydraulic power pack type MP: D 7200 H
13
62/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Publication Table page
MSE Line connector type MSD and others: D 7163Economy circuit type MSD: D 7813
38
MSD Line connector type MSD and others: D 7163Economy circuit type MSD: D 7813
38
MSV 2/2-way poppet valve type MSV, RSV (size 6): D 6407 22
MV Pressure-limiting valve type MV, SV and DMV: D 7000/1Multiple pressure-limiting valve type MV: D 7000 M
24
NBVP Directional seated valve type NBVP 16: D 7765 N 19
NE Two-stage valve type NE: D 7161 27
NPC Compact hydraulic power pack type NPC: D 7940 12
NSMD Clamping module type NSMD: D 7787 17
NSV Suction valve type NSV: D 6368 35
NSWP Directional spool valve type NSWP 2: D 7451 N 15
PDM Proportional pressure-reducing valve type PDM and PDMP: D 7584/1Proportional pressure-limiting valve type PDV and PDM: D 7486
27
PDV Proportional pressure-limiting valve type PDV and PDM: D 7486 25
PFM Pressure lter type PFM: K PFM 40
PIH Proportional directional control valve type PRH, PIH (size 6): D 6418Proportional directional valve type PIH (size 10): D 6419
17
PIL Proportional directional control valve type POL, PRL, PIL (size 6): D 6394Proportional directional control valve type POL, PRL, PIL (size 10): D 6395
17
PM Proportional pressure-reducing valve type PM and PMZ: D 7625 26
PMV Proportional pressure-limiting valve type PMV and PMVP: D 7485/1 25
PMZ Proportional pressure-reducing valve type PM and PMZ: D 7625 26
POH Proportional directional control valve type PRH, PIH (size 6): D 6418Proportional directional valve type PIH (size 10): D 6419
17
PRL Proportional directional control valve type POL, PRL, PIL (size 6): D 6394Proportional directional control valve type POL, PRL, PIL (size 10): D 6395
17
PSL Proportional directional spool valve, type PSL and PSV size 2: D 7700-2Proportional directional spool valve, type PSL, PSM and PSV size 3: D 7700-3Proportional directional spool valve, type PSL, PSM and PSV size 5: D 7700-5Actuation for proportional directional spool valves type PSL/PSV: D 7700 CAN
18
POH Proportional directional control valve type PRH, PIH (size 6): D 6418Proportional directional valve type PIH (size 10): D 6419
17
PSLF Proportional directional spool valve type PSLF, PSVF and SLF: D 7700-FProportional directional spool valve type PSLF, PSVF and SLF size 3: D 7700-3FProportional directional spool valve type PSLF, PSVF and SLF size 5: D 7700-5FProportional directional spool valve banks type PSLF and PSVF size 7: D 7700-7F
18
PSR2 Proportional ow control valve type PSR2 (size 4): D 6389Proportional ow control valve type PSR2 (size 10): D 6390Sandwich plates with 2-way ow control valve type SR2 (size 6 and 10): D 6441
31
PSR3 Proportional ow control valve type PSR3 (size 10): D 6391 31
PSV Proportional directional spool valve, type PSL and PSV size 2: D 7700-2Proportional directional spool valve, type PSL, PSM and PSV size 3: D 7700-3Proportional directional spool valve, type PSL, PSM and PSV size 5: D 7700-5Actuation for proportional directional spool valves type PSL/PSV: D 7700 CAN
18
PSVF Proportional directional spool valve type PSLF, PSVF and SLF: D 7700-FProportional directional spool valve banks type PSLF and PSVF size 7: D 7700-7FActuation for proportional directional spool valves type PSL/PSV: D 7700 CAN
18
Q Throttle valve and throttle check valve type Q, QR and QV: D 7730 29
QR Throttle valve and throttle check valve type Q, QR and QV: D 7730 29
QV Throttle valve and throttle check valve type Q, QR and QV: D 7730 29
© HAWE Hydraulik SE HAWE compact - 06-2020-3.8 63/65
Type Publication Table page
R Radial piston pump type R and RG: D 6010 8
RB Check valve type RK and RB: D 7445 32
RC Check valves, type RC: D 6969 R 32
RD Throttle valve and throttle check valve type ED, RD and RDF: D 7540 29
RDF Throttle valve and throttle check valve type ED, RD and RDF: D 7540 29
RE Check valve type RE: D 7555 R 32
RG Radial piston pump type R and RG: D 6010 8
RH Releasable check valve type RH: D 6105 33
RHC Releasable check valve type RHC and RHCE: D 7165 33
RK Check valve type RK and RB: D 7445 32
RSV 2/2-way poppet valve type MSV, RSV (size 6): D 6407 22
RZ Dual-stage pump type RZ: D 6910 8
SAM 4/2-way directional control valve type SAM, SBM (size 6): D 6549 15
SAMB Control for CNC press brakes type SAMB, SAPB: D 6336Control for CNC press brakes type SAMB, SPLM: D 6337
43
SAL 4/2-way directional control valve type SAM, SBM (size 6): D 6549 15
SB Flow control valve (lowering brake valve) type SB and SQ: D 6920 31
SBM 4/2-way directional control valve type SAM, SBM (size 6): D 6549 15
SCM 4/2-way directional control valve type SAM, SBM (size 6): D 6549 15
SD Flow control valve type SD, SF and SK: D 6233 30
SE Proportional ow control valve type SE and SEH: D 7557/1 31
SEH Proportional ow control valve type SE and SEH: D 7557/1 31
SF Flow control valve type SD, SF and SK: D 6233 30
SG Directional spool valve type SG and SP: D 5650/1 16
SJ Flow control valve type SJ: D 7395 31
SK Flow control valve type SD, SF and SK: D 6233 31
SL Poppet valve type SP 1 in manifold system type SL 1: D 6024 19
SLC Valve system type SLC 1: D 6033 19
SP Directional spool valve type SG and SP: D 5650/1 16
SP3 Poppet cartridge valve type SP 3: D 6019 19
SPDB Pressure relief valve type VDB (size 3): D 6362 25
SPVM Control for CNC press brakes type SPVM: D 6338 42
SQ Flow control valve (lowering brake valve) type SB and SQ: D 6920 31
SR2 2-way ow control valve type SR2 (size 8): D 64022-way ow control valve type SR2 (size 6): D 6403Sandwich plates with 2-way ow control valve type SR2 (size 4): D 6440Sandwich plates with 2-way ow control valve type SR2 (size 6 and 10): D 6441
31
SR3 3-way ow control valve type SR3 (size 6): D 6404 31
SV Pressure-limiting valve type MV, SV and DMV: D 7000/1 24
SVN 2/2-way poppet valve type SVS, SVN (size 8): D 64122/2-way poppet valve type SVN 222 (size 8): D 6413
21
SVS 2/2-way poppet valve type SVS, SVN (size 8): D 64122/2-way poppet valve type SVN 222 (size 8): D 6413
21
SW Directional spool valve type SW: D 7451 15
SWPN Directional spool valve type SWPN: D 7451 AT 15
TCG-4 Data module type TCG-4: TCG-4 36
64/65 HAWE compact - 06-2020-3.8 © HAWE Hydraulik SE
Type Publication Table page
TLC3 Stacking valve system type TLC 3: D 6020 TLC 3 15
TQ Flow divider, type TQ: D 7381 32
V30D Variable displacement axial piston pump type V30D: D 7960 8
V30E Variable displacement axial piston pump type V30E: D 7960 E 8
V60N Variable displacement axial piston pump type V60N: D 7960 N 9
V80M Variable displacement axial piston pump type V80M: D 7962 M 9
VB Valve bank (directional seated valve) type VB: D 7302 21
VDB Pressure relief valve type VDB (size 3): D 6362 25
VDM Pressure-reducing valve, pilot-controlled type VDM: D 5579 26
VDM2 26
VH Directional seated valve type VH, VHP and VHR: D 7647 20
VHP Directional seated valve type VH, VHP and VHR: D 7647 20
VHR Directional seated valve type VH, VHP and VHR: D 7647 20
VP Directional seated valve type VP: D 7915 19
VPDB Pressure relief valve type VDB (size 3): D 6362 25
VPDM Proportional pressure control valve type VPDM (size 16): D 6388Proportional pressure control valve type VPDM (size 6): D 6530
27
VR Pre-load check valve type VR: D 7340 24
VUB Pressure relief valve type VDB (size 3): D 6362 25
WG Directional seated valve type G, WG and others: D 7300 21
WLA3 Directional spool valve type WLA 3: D 6023 15
WH Directional seated valve type WN and WH: D 7470 A/1 21
WN Directional seated valve type WN and WH: D 7470 A/1 21
WV Shuttle valve type WV and WVC: D 7016 34
WVC Shuttle valve type WV and WVC: D 7016 34
WVE Shuttle valve type WV and WVC: D 7016 34
X84 Fitting type X 84: D 7077 41
HAW
E Ko
mpa
kt 0
6-20
20-3
.8
HAWE Hydraulik SEPostfach 11 55 | 85605 Aschheim/Munich | GermanyPhone +49 89 37 91 00-0 | [email protected] | www.hawe.com