PRODUCT CATALOGUE - titan-omsk.ru · The main production site of the company is located on the...
Transcript of PRODUCT CATALOGUE - titan-omsk.ru · The main production site of the company is located on the...
3
COMPANY PROFILE
Group of Companies “Titan”The Group of Companies “Titan” is the largest Siberian company, one of the key investors of Omsk region. It was founded in 1989 by Mikhail Sutyaginsky.
It includes about 20 enterprises.
EnTERPRisEs Of ThE PETROChEmiCAL COmPLEx PJsC “Omsky kauchuk” (production of synthetic rubbers, organic synthesis products, high-octane fuel components
and other products of hydrocarbon raw material refining); “Poliom”, Ltd. – is the Joint-Venture of the GC “Titan”, SIBUR and “Gazprom Neft” (polypropylene production); novocherkassk Lubricant Production Plant Co., Ltd (production of plastic lubricants and oils).
EnTERPRisEs Of ThE AGRO-inDUsTRiAL COmPLEx “Titan-Agro” Ltd. (agro-industrial complex investment project implementation), including three structural subdivisions:
pig-breeding complex “Petrovsky”, feed mill “Pushkinsky”, meat processing plant “Pushkinsky”.
EnTERPRisEs AnD DivisiOns Of ThE infRAsTRUCTURE Thermal power station; investkhimprom Co., Ltd (motor road cargo transportation); “Titan-inter-Trade”, Ltd. (export sales of petrochemical products).
4
COMPANY PROFILE
Omsk
The range of products and rendered services includes about 200 items.
The products of the Group of Companies “Titan” are in demand by consumers and occupy significant shares in the total Russian consumption: more than 30% of the Russian market of SKMS rubbers; about 30% of the Russian MTBE market; about 20% of the Russian polypropylene market.
The products comply with international quality standards.
The main production site of the company is located on the territory of Omsk region; affiliated and dependent organizations are represented in Russia (Moscow, Saint-Petersburg, Republic of Bashkortostan, Rostov region etc.) and CIS countries. The number of employees of the Group of Companies is about 5000 people.
The integrated management system has been introduced at the enterprises of the GC “Titan” as well as at “Poliom”, Ltd (Joint-Venture of the GC “Titan”, SIBUR and “Gazprom Neft”) that meets the requirements of the international standards ISO 9001, ISO 14001, OHSAS 18001. The formation of consolidated financial statements is carried out in accordance with the international financial Reporting standards (ifRs).
Throughout the course of its history “Titan” supports children’s and mass sports, veteran organizations, educational and cultural institutions and provides significant assistance to the region in the implementation of social programs.
Improving the material, technical and raw material base, guided by advanced technologies the GC “Titan” provides a high potential to satisfy the needs of partners. “We create conditions for growth” – this is the company’s slogan.
5
COMPANY PROFILE
mTBEBelarusKazakhstanKirghiziaLatviaMongoliaUkraineFinland
sBRBelarusBulgariaBrazilIndiaKazakhstanChinaMalaysiaPakistanPeruPolandRomaniaSerbiaSlovakiaTaiwanTurkeyUkraine
PPBelgiumBulgariaGermanyGreeceEgyptIsraelItalyChinaLithuaniaPolandSerbiaSlovakiaTurkeyFinlandEstonia
LPG AbkhaziaBelarusHungaryKazakhstanChinaLatviaMongoliaNetherlandsPolandRomaniaTurkeyUkraineFinland
invEsTmEnT PROJECTs Of ThE GC “TiTAn”On the territory of Omsk region at the initiative of the “GC “Titan” and with the support of the Government of Omsk region the projects are being implemented aimed at creating new high-technology industries, including on the terms of the public-private partnership with the asset attraction of the State Corporation “Bank for Development and Foreign Economic Affairs (Vnesheconombank)”. Since 2010 more than 25 billion rubles have been attracted to the region’s economy.
imPLEmEnTED PROJECTs (sinCE 2010): normal butylene processing unit; polypropylene production plant; pig-breeding complex “Petrovsky”; meat processing plant “Pushkinsky”; feed mill “Pushkinsky”.
PROJECTs AT sTAGE Of imPLEmEnTATiOn: technical re-equipment of phenol-acetone production with the transfer
to zeolitic alkylation of cumene and isopropyl alcohol (IPA) production; increase of the MTBE production capacity to 330 thousand tons per year; production of epoxy resins creation of the complex for the production of PET pellets
and BOPET films; technical re-equipment of the ethylene production unit (EP-25); construction of combined cycle gas turbine unit (PGU-120); extension of feedstock and commodity tank farms; transport and logistics network upgrading; production of specialty chemicals.
PROmisinG PRODUCTs Of ThE GC “TiTAn” amino acids acetone isopropyl alcohol composite materials propylene copolymers phenol enzymes ETBE DDGS BOPET films PET pellets
sALEs GEOGRAPhy
aviation oils: motor, hydraulic, transmission oils
PVC plasticizer special purpose grease metalworking fluids parting fluids for stamping drilling fluid bases friction modifiers
6
COMPANY PROFILE
We createconditions
for growth
AChiEvEmEnTsThe Group of Companies “Titan”: since the year 2006 it has been included in competent federal ratings,
such as Forbes, RAEX, RBK TOP 500 and others; is regularly included in the top 10 largest regional taxpayers
to the budgets of different levels.
DiPLOmAs AnD AWARDs grand prix for the contribution to the petrochemical industry
development of the Russian Federation; diplomas and medals of international exhibitions “Chemistry”,
“Tires, general mechanical rubber goods, rubbers”; diplomas of the contest “100 best goods of Russia”; title “The Best Russian Exporter”; distinction marks for active investment activity on the territory
of Omsk region; All-Russian award “Ecological development - Evolution Awards» –
the Best producer of environmentally efficient equipment.
JsC “GC “TiTAn” 22, Gubkin Ave., the city of Omsk, 644035tel.: +7 (3812) 29-95-55, 35-69-31fax: +7 (3812) 35-69-32e-mail: [email protected] www.titan-omsk.ru
sALEs in RUssiA
sales Department tel.: +7 (3812) 29-95-55e-mail: [email protected]
marketing Department тел.: +7 (3812) 29-95-55 (ext. 55-50)e-mail: [email protected]
ExPORT sALEs
“Titan-inter-Trade”, Ltd. tel.: +7 (3812) 92-54-75, 29-95-55е-mail: [email protected]
Contacts
7
PJSC “Omsky kauchuk”EnTERPRisE PROfiLE
The PJSC “Omsky kauchuk” traces its history from October 24, 1962. At present the company employs more than 3000 workers, output of petrochemical processing and organic synthesis products has been organized: various types of rubbers, commodity latexes, high-octane fuel components, including methyl-tret-butyl ether and other types of products.
The management system has been available at the PJSC “Omsky kauchuk” since the year 2006 in conformity with the requirements of the international standards ISO 9001, ISO 14001, OHSAS 18001.
The plant holds one of the leading positions among Russian producers of synthetic rubber. Throughout the entire history the company’s products were frequently honored with highest awards. The plant was the first in Russia to master the method of salt-free coagulation applied in the production of rubbers. The plant’s products (phenol, acetone, rubbers) were frequent winners in the contest “100 best goods of Russia”. The plant product quality is oriented towards the EU specification and is in full conformity with it. MTBE, normal butane, butadiene, alphamethylstyrene, acetone, phenol, propylene, isopropylbenzene are registered in accordance with the requirements of REACH regulations.
Address: 30, Gubkin Ave., the city of Omsk, 644035telephones: +7(3812) 697-000fax: +7(3812) 641-011e-mail: [email protected]
8
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
sBR / BUTADiEnE-mEThyLsTyREnE RUBBERssBR-1712, GOST 15628-79 first qualitysBR-1705, GOST 11138-78 first quality, group 1, group 2sBR-1500, GOST 15627-79 first qualitysBR-1502, GOST 23492-83 first quality, group 3
Application
SBR-1500, SBR-1502 rubbers are used in the tyre industry and for the production of mechanical rubber goods. SBR-1502 is used in the production of rubber mechanical goods and in the footwear industry.
Specifications SBR-1712 SBR-1705 SBR-1500 SBR-1502
Mooney viscosity MB 1+4 (100°С)• quality 1 group 1• quality 1 group 2
47-5736-4445-54
47-56
48-58
Nominal tensile strength, MPa (kgf/cm2), minimum• quality 1 group 1• quality 1 group 2
22.0 (225)
23.5 (240)24.5 (250)
27.9 (285)
26.5 (270)
Mass fraction of organic acids, %, max. 4.0-5.6 5.0-6.7 5.0-6.5 5.0-7.2
Mass fraction of oil PN-6К, % 26.5-29.0 14.0-17.0 – –
Mass fraction of the bound second monomer (alphamethylstyrene), % 22.0-25.0 21.0-24.0 22.5-24.5 22.0-25.0
Packing and transportation
Railway wagons, truck trailers, containers (40’HC)
Product packing variants:• paper bags – 30 kg• wooden pallets – 450 kg• plastic containers – 540 kg• metal containers – 1260 kg
9
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
sBR / BUTADiEnE-mEThyLsTyREnE RUBBERssBR-1706 TDAE, Technical Specifications (TU) 22 9435-063-05766793-12 sBR-1723 TDAE, Technical Specifications (TU) 22 9435-064-05766793-12
Packing and transportation
Railway wagons, truck trailers, containers (40’HC)
Product packing variants:• paper bags – 30 kg• wooden pallets – 450 kg• plastic containers – 540 kg• metal containers – 1260 kg
Application
SBR 1706 / 1723 TDAE rubbers are manufactured using low-toxic (“green”) oil, they are applied in the tyre industry and for the production of rubber mechanical goods.
Specifications SBR-1706 TDAE SBR-1723 TDAE
Premium First Premium First
Mooney viscosity MB 1+4 (100°С)• quality 1 group 1• quality 1 group 2
37-4445-54
36-4445-54
47-57 46-58
Nominal tensile strength, MPa (kgf/cm2), minimum• quality 1 group 1• quality 1 group 2
21.0 (215)22.0 (225)
20.6 (210)21.6 (220)
18.6 (190) 17.6 (180)
Mass fraction of organic acids, %, max. 5.0-6.7 3.7-5.6
Mass fraction of oil, % 14.5-17.0 14.0-17.0 26.5-29.0 26.0-29.0
Mass fraction of the bound second monomer (alphamethylstyrene), % 21-24
10
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Latex grade, GOST/TU*
Monomer ratio Purpose Indicators, shelf life
Butadiene-styrene
sKs-65GPGOST 10564-75
35:65butadiene : styrene
for the production of water-dispersion paints and application in the light, paper industry, in the production of construction materials
• dry residue ≥48%• рН 11.5-12.5 units• σ ≤48 mN/m• 12 months
sKs-65GPBTU 38.103111-83
• dry residue ≥44%• рН 10-13.0 units• σ ≤48 mN/m• 6 months
Bs-50GOST 15080-77
50:50butadiene : styrene
for carpet finishing in the mixture with latex BS-85, for the production of sealing paste
• dry residue ≥47%• рН ≥10.5 units• σ ≤45 mN/m• viscosity 12-16 s.• 6 months
Bs-85TU 38.103229-84
15:85butadiene : styrene
for carpet finishing in the mixture with latex BS-50
• dry residue ≥47%• рН ≥9.5 units.• σ ≤60 mN/m• viscosity ≤22 s.• 6 months
Bms-50KPTU 9491-36-05766793-94
50:50 butadiene : α-methylstyrene
in the production of cardboard • dry residue ≥35%• рН 9.5-10.5 units• σ ≥50 mN/m• viscosity – optionally• Defo stiffness 1000-2500 gf• fabric adhesive strength
by latex ≥0.35 MPa• 12 months
sKms-65GPTU 9491-33-05766793-93
35:65butadiene : α-methylstyrene
for the production of emulsion paints, in the production of construction materials
• dry residue ≥47%• рН 11.0-12.5 units• σ ≤48 mN/m• 12 months
synThETiC LATExEs
Application
Latexes are used in the production of water-dispersion paint coating materials, in the paper industry, in the productionof construction materials.Latexes of grades SKS-65GP, SKS-65GPB, BS-50, BS-85, BS-65N, BSK-70/2 are ready to be offered.Latexes of grades BMS-50KP, SKMS-65GP, LSK-1V, SKS-75K, SKD-15, BS-65K-3, BMK-65/1 are under development.
*Technical Specifications
11
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
LsK-1vTU 38.303-11-26-91
40:60butadiene : α-methylstyrene
in the production of water-resistant cardboard
• dry residue ≥42%• рН 8-10 units• σ ≥40 mN/m• 6 months
sKs-75КTU 9491-44-05766793-96
25:75butadiene : styrene
in the technology of obtaining innersole and cellulosic material
• dry residue ≥43%• рН 11.5-12.5 units• 6 months
Carboxylated latexes
Bs-65nTU 9491-48-05766793-97
35:65:0,7butadiene : styrene : methacrylic
acid
as a binding substance in the paint and varnish industry, in the paper industry for paper coating, in the production of household detergents for obtaining phosphate water-emulsion anti-rust coatings (grade B – as a binding substance in the shipbuilding and construction industry)
• dry residue ≥47%• рН ≤9.5 units• viscosity ≤18 s• film appearance –uniform,
colorless• mechanical stability coagulum • 6 months
sKD-1sGOST 11604
100:1butadiene : methacrylic acid
for cord treatment • dry residue ≥28%• рН ≥9.0 units• σ ≥38 mN/m• Defo stiffness 1500-4000 gf• 6 months
Bs-65К-3TU 38.103657-88
35:65:3butadiene : styrene : methacrylic
acid
for the production of special-purpose anti-rust coatings
• dry residue ≥46%• рН 8.5-9.5 units• σ ≤55 mN/m• viscosity 12-20 s.• Defo stiffness 610-1630 gf• film strength – not defined• 6 months
BmK-65/1TU 38.103330-81
35:65:1butadiene : methyl acrylic ether :
methacrylic acid
for the usage in leather finishing • dry residue ≥37.5%• рН 6-8 units• σ ≤50 mN/m• viscosity 10-15 s.• film strength ≥350 g/mm• 6 months
BsK-70/2TU 38.103541-88
30:70:1butadiene : styrene : methacrylic
acid
for carpet gluing, in the petroleum industry for the preparation of cement and latex slurries and in other branches of industry
• dry residue ≥47.5%• рН ≥9.4 units• σ ≤37 mN/m• viscosity 12-18 s.• 6 months
Packing and transportation
IBC-container, drums (plastic/steel), tank trucks, RTC, flexi-tanks
12
Application
Butadiene is designed for the production of synthetic rubbers, latexes and chloroprene.
Specifications А B
Premium grade First grade First grade
Mass fraction of 1,3-butadiene; %, minimum 99.3 99.0 98.0
Mass fraction of highly volatiles (hydrocarbons С2, С3), %, maximum 0.10 0.20 0.40
Mass fraction of cyclopentadiene,%, maximum 0.0010 0.0010 not defined
Mass fraction of nitrogen compounds (in terms of nitrogen),%, maximum
including mass fraction of ammonia (in terms of nitrogen),%, maximum
0.003
0.0010
0.003
0.0010
0.020
not determined
Mass fraction of carbonyl compounds,%, maximum 0.005 0.005 0.006
Mass fraction of monosubstituted acetylene hydrocarbons,%, maximum 0.005 0.005 0.020
Mass fraction of allene hydrocarbons,%, maximum 0.03 0.03 not defined
Mass fraction of heavy residue,%, maximum 0.10 0.10 0.30
Mass fraction of methyl ether,%, maximum not defined not defined not defined
Mass fraction of copper,%, maximum not defined not defined 0.00005
Mass fraction of peroxide compounds (in terms of active oxygen), %, maximum 0.0003 0.0010 0.0010
Mass fraction of inhibitor:
• para-tretbutyl-pyrocatechin, %, minimum
• wood tar inhibitor, %, minimum
0.005-0.01
0.010-0.03
0.005-0.01
0.010-0.03
0.005-0.01
0.0010-0.03
Undissolved moisture content absent absent absent
BUTADiEnETechnical Specifications (TU) 38.103658-88 with amendments 1-8; GOST R 55066-2012
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Transportation
RTC
13
Application
To increase the octane number in the production of motor petrols. The addition of MTBE to motor fuels increases the fuel combustion temperature and engine operation efficiency, improves engine start-up at low temperatures. Significantly reduces the content of CO, hydrocarbons in exhaust gases of cars.
Specifications
Mass fraction of MTBE, %, minimum 98.0
Mass fraction of alcohols, %, maximum 1.5
Mass fraction of hydrocarbons C4– C8, %, maximum 1.5
Mass fraction of moisture, %, maximum 0.1
Mechanical impurities absent
mEThyL TERT-BUTyL EThER (mTBE)Grade АTechnical Specifications (TU) 38.103704-90
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Application
It’s used as a solvent and as a component of motor petrols. It’s not designed for the direct application as a commodity motor petrol.
Specifications
Density at 20оС, kg/m³, within limits 690-718
Knock rating:• octane number, determined by the motor
method, minimum
• octane number, determined by the research method, minimum
79
91
Fraction composition:
Initial boiling point, оС, minimum 28
10% is distilled at temperature, оС, maximum 75
50% is distilled at temperature, оС, maximum 120
90% is distilled at temperature, оС, maximum 190
Dry point, оС, maximum 230
Distillation test residue, %, maximum 1.5
Residue and wastes, % , maximum 4.0
Mass fraction of sulfur, %, maximum 0.05
Saturated vapor pressure, kPa (mm Hg), maximum 80 (600)
Acidity, mg КОН per 100 cm³, maximum 2.0
Existent gum, mg per 100 cm³, maximum 5.0
Copper plate test passed
Mechanical impurities and water absent
Induction period, min., minimum 360
PETROL fOR inDUsTRiAL PURPOsEsCompany standard 05766793-008-2013
Transportation
RTC, tank trucks
Transportation
RTC, truck tanks
14
Application
For the production of polypropylene during polymerization over titan-magnesium catalyst.
Specifications
Volume fraction of propylene, %, minimum 99.5
Volume fraction of propane, %. maximum 0.5
Volume fraction of ethane, ppm, maximum 200
Volume fraction of ethylene, ppm, maximum 50
Volume fraction of C4, C5, saturated hydrocarbons, ppm, maximum 200
Volume fraction of acetylene, ppm, maximum 5
Volume fraction of methyl acetylene, ppm, maximum 3
Volume fraction of propadiene, ppm, maximum
5
Volume fraction of butadiene, ppm, maximum 50
Mass concentration of sulfur, mg/m3 maximum 1
Mass fraction of water, ppm, maximum 5
Volume fraction of carbon oxide, ppm, maximum 0.03
Volume fraction of carbon dioxide, ppm, maximum 5
Volume fraction of COS, ppm, maximum 0.02
Volume fraction of arsine, ppm, maximum 0.03
Volume fraction of phosphine, ppm, maximum 0.03
PROPyLEnE POLymERiZATiOn GRADETechnical Specifications (TU) 2411-004-76332549-2016
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Application
It’s used for the production of organic products.
Specifications
Volume fraction of propylene, %, minimum 99.8
Volume fraction of ethylene , %, maximum 0.005
Volume fraction of acetylene and methyl acetylene , %, maximum 0.001
Volume fraction of hydrocarbons С4, %, maximum 0.002
Volume fraction of diene hydrocarbons (propadiene and butadiene), %, maximum 0.001
Volume fraction of ethane, propane, %, maximum 0.2
Mass concentration of sulfur, mg/m3, maximum 1.0
Mass fraction of water, %, maximumа) in the product, delivered by pipelineb) in the product, delivered in tanks
and cylinders
0.0005
0.02
Free water content absent
PROPyLEnEChemical grade, premiumGOST 25043-13
Transportation
RTC
Transportation
RTC
15
PROPAnETechnical gradeGOST 20448-90
Application
It’s used as a fuel for public utility consumption and for industrial purposes.
Specifications
Mass fraction of components , %
• amount of methane, ethane, ethylene
• amount of propane and propylene
• amount of butanes and butylenes, minimum
not defined
not defined
60
Volume fraction of liquid residue at 20°С, %, maximum 1.8
Saturated vapor pressure, manometric, MPa, at a temperature of +45°С, maximum 1.6
• Mass fraction of hydrogen sulfide and mercaptan sulfur, %, maximum
• including hydrogen sulfide, maximum
0.013
0.003
Free water and alkali content absent
Odor intensity, points, minimum 3
BUTAnETechnical gradeGOST 20448-90
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Transportation
RTC, truck tanks
Application
It’s used as a fuel for public utility consumption and for industrial purposes.
Specifications А B
Mass fraction of components, %Amount of hydrocarbons:• C1 and C2, maximum• C3, minimum
including propylene, maximum• C4 and higher, maximum• C5 and higher, maximum
2.096.00.23.0absent
4.090.010.010.01.0
Mass fraction of hydrogen sulfide, %, maximum 0.003 0.003
Free water and alkali content absent absent
PROPAnE fRACTiOnTechnical Specifications (TU) 0272-023-00151638-99
Transportation
RTC, truck tanks
Application
It’s used as a fuel for public utility consumption and for industrial purposes.
Specifications
Mass fraction of components, %,amount of propane and propylene, minimum 75.0
Volume fraction of liquid residue at 20°С, %, maximum 0.7
Saturated vapor pressure, manometric, MPa, at a temperature of:• +45°С, maximum• –20°С, minimum
1.60.16
• Mass fraction of hydrogen sulfide and mercaptan sulfur, %, maximum
• including hydrogen sulfide, maximum0.0130.003
Odor intensity, points, minimum 3
16
Application
As a raw material for pyrolysis and for other purposes.
Specifications Highest grade
А B
Mass fraction of components, %
• propane, maximum
• isobutane, maximum
• amount of butylenes and neopentane (2,2-dimethylpropane), maximum
• normal butane, maximum
• amount of hydrocarbons, С5 and higher, maximum
0.3
0.9
1.4
98.6 0.4%
0.5
1.5
2.5
97.5
0.6%
1.0
4.0
6.0
94.0
2.5%
Mass fraction of hydrogen sulfide and mercaptan sulfur, %, maximum
0.005 0.005 0.01
Free water and alkali content absent absent absent
n-BUTAnETechnical Specifications (TU) 38.301-19-57-97
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Application
It’s used as a fuel for public utility consumption and for industrial purposes.
Specifications
Mass fraction of components, %• amount of methane, ethane, ethylene• amount of propane and propylene • amount of butanes and butylenes,
maximum
not defined not defined 60
Volume fraction of liquid residue at 20°С, %, maximum 1.6
Saturated vapor pressure, manometric, MPA, at a temperature of +45°С, maximum 1.6
• Mass fraction of hydrogen sulfide and mercaptan sulfur, %, maximum
• including hydrogen sulfide, maximum
0.013
0.003
Free water and alkali content absent
PROPAnE-BUTAnE mixTUREGOST 20448-90
Transportation
RTC, truck tanksTransportation
RTC, truck tanks
17
Application
C5 fraction is used as a component of motor petrol and as feedstock for isoprene production, which is a monomer for the synthesis of synthetic rubbers.
Specifications
Content of desired fraction, C5, vol. %, minimum 90
Content of free water and mechanical impurities, wt % absent
Alcali content absent
Density at 20°C, g/cm3, maximum 0.645
С5 fRACTiOnTechnical Specifications (TU) 0272-072-05766793-2016
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Application
It’s used as a coagulant for the industrial waste water treatment and chemical for carbonate deposit and gellation phosphate removal.
Specifications
Mass fraction of the basic substance in terms of AlCl3, g/dm3 200-300
Mass fraction of suspended particles, g/dm3, maximum 0.5
Hydrogen ion activity index, pH 0.8-2.0
Mass fraction of organic impurities, g/dm3, maximum 0.5
ALUminiUm hyDROChLORiDETechnical Specifications (TU) 38.302163-94
Application
It’s used for the production of synthetic rubbers and latexes, plastics, as well as in other spheres of the national economy.
Specifications
Mass fraction of alpha-methylstyrene, %, minimum 99.7
Mass fraction of n-propylbenzene and styrene,%, maximum 0.03
Platinum-cobalt color scale (Hazen scale) – the norm is defined by agreement with consumers
Refraction index at 20°С 1.5382-1.5390
Polymer availability – it should pass the testMass fraction of phenol, %, maximum 0.0005
ALPhA-mEThyLsTyREnE (isOPROPEnyLBEnZEnE)Technical Specifications (TU) 38.103679-89
Transportation
RTC, truck tanks
Transportation
RTC, TC, truck tanks, ISO-tanks
Transportation
Truck tanks
18
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Application
It’s used for the synthesis of phenol, acetone and alpha-methylstyrene, as well as a high-octane blending component of motor fuels.
Specifications Grade E Grade A Grade B Grade T
Appearance Colorless transparent liquid
Density at 20оС, g/cm3 0.861-0.863 0.861-0.863 0.861-0.863 0.859-0.862
Mass fraction of isopropylbenzene, %, minimum 99.9 99.9 99.7 95.0
Mass fraction of organic impurities: • ethylbenzene • butylbenzenes and higher hydrocarbons• n-propylbenzene• non-aromatic compounds
0.02000.01500.05000.0200
0.050.020.050.003
0.150.100.20not defined
––––
Mass fraction of unsaturated compounds, gram of bromine per 100 grams of the product, maximum 0.030 0.015 0.02 –
Maximum fraction of phenol, %, maximum 0.0010 0.001 0.0015 –
Maximum fraction of chlorine, %, maximum 0.0004 0.0004 0.001 –
Maximum fraction of sulfur, %, maximum 0.0002 0.0002 0.001 0.0006
Benzene content, %, maximum 0.001 not specified not specified 1.0
Cymene content, %, maximum 0.005 not specified not specified –
Alpha-methylstyrene content, %, maximum 0.0050 not specified not specified –
Diisopropylbenzene content, %, maximum 0.001 not specified not specified –
Amount of alkylbenzenes, excluding isopropylbenzene, %, maximum – – – 4.0
CUmEnE (isOPROPyLBEnZEnE)Technical Specifications (TU) 2114-069-05766793-2016
Transportation
RTC, truck tanks, ISO-tanks
19
Application
Butylbenzene fraction is used as a motor petrol component and for processing by shale processing plants.
Specifications
Water content absent
Density, g/cm3, maximum 0.865-0.885
Content of mechanical impurities, %, maximum 0.01
Content of butylbenzenes, %, minimum 65-90
Content of isopropylbenzene, %, maximum 10-35
Fraction composition:а) initial boiling point, оС, minimumб) end-boiling point, оС, minimumв) residue and waste in the amount, %, maximum
1002302
Content of water-soluble acids and alkalis absent
Copper plate test passed
Application
Ethylbenzene fraction is used as a component of motor petrol and solvent during the production of paints and varnishes.
Specifications
Fraction composition:• end boiling point,оС, maximum• volume ratio of residue and losses during
fractional distillation, %, maximum
200
2
Content of mechanical impurities and water absent
Content of water-soluble acids and alkalis absent
Acidity, mg КОН/100 ml, maximum 2
Actual tar content, mg/100 ml of fraction, maximum 6
Copper plate test passed
BUTyLBEnZEnE fRACTiOnTechnical Specifications (TU) 2414-054-05766793-2003
EThyLBEnZEnE fRACTiOnTechnical Specifications (TU) 38.30225-81
PRODUCTS OF THE PJSC “OMSKY KAUCHUK”
Transportation
RTC, truck tanks
Transportation
RTC, truck tanks
20
“Poliom”, LtdJoint-Venture of the Group of Companies “Titan”, SIBUR and “Gazprom neft”
EnTERPRisE PROfiLE
“Poliom”, Ltd was created on May 14, 2005 for the project implementation connected with the construction of the polypropylene production plant. The plant was built according to the technology of Basell company, supplier of process equipment – Tecnimont company. Advanced world-wide products are implemented in the project, that allow to complete waste-free production cycle. About 400 people are employed by the enterprise. Since 2016 the management system has been in effect at “Poliom”, Ltd, that is in conformity with the requirements of the international standards ISO 9001, ISO 14001, OHSAS 18001. Omsk plant makes the top three Russian polypropylene producers. A number of polypropylene grades, produced by the enterprise are laureates of the contest “100 best goods”. The product quality is oriented towards the EU specification and is in full conformity with it. The products of the enterprise are registered in accordance with the requirements of REACH regulations.
Address: 137, Krasnoayarsky tract, the city of Omsk, 644035telephone: +7 (3812) 79-02-07fax: +7 (3812) 66-86-44e-mail: [email protected]
Omsk polypropylene production plant can produce polypropylene and copolymers of propylene with 1-butene and ethylene, of which: 40 grades – homopolymers; 21 grades – block copolymers; 17 grades – statistical copolymers.
Application
Polymer type sphere of application
homopolymer
• cast and extrusion products of technical and general purpose;• packing film for different purposes;• medical and sanitary purpose products;• monofilaments;• spunbond fibers;• pipe and pipe fittings;
block copolymer
• pressure pipe and pipe fittings;• component parts for motor car industry;• blow molding of industrial and general-purpose products;• profiled sheets and thermoforming sheets;
statistical copolymer
• extrusion flat slot and tubular film;• blow molding of industrial and general-purpose products ;• application of coatings;• thin-wall injection molding.
21
PRODUCTS OF THE LLC “POLiOM”
POLyPROPyLEnETechnical Specifications (TU) 20.16.51-001-76332549-20166
Description
Polypropylene is a crystalline thermoplastic polymer without color and odor. In its natural condition it’s a transparent polymer, but it can be easily pigmented to several colors and tints. Flexibility and versatility of the product allow to apply it in any climatic zones. The brand assortment of the plant depends on the market requirements.
Grades
PP h253 ff
For the production of continuous threads and staple fiber
PP h270 ff PP h273 ff PP h373 ff PP h378 ff
For the production of spunbond
PP h030 GP PP h031 ff PP h033 ff PP h040 GP
For the production of tapes and raffia
PP h021 Bf PP h031 Bf
For the production of biaxially oriented polypropylene (BOPP) film
PP h060 Cf PP h065 Cf PP h080 Cf PP h085 Cf
For the production of non-oriented cast polypropylene (CPP) film
PP h003 GP PP h007 GP PP h013 GP PP h020 GP PP h030 GP PP h040 GP PP h080 GP PP h120 GP
PP h180 GP PP h250 GP PP h251 im PP h252 im PP h350 GP PP h351 im PP h352 im PP h451 im
PP h452 im
For the production of items by the die casting method
PP h003 GP PP h007 GP PP h007 Ex PP h013 GP PP h020 GP PP h030 GP PP h040 GP
Extrusion of pipes and sheets
PP h030 GP PP h032 Tf
Speed thermoforming of disposable tableware
Packing and transportation
Railway wagons, truck trailersProduct packing – 25 kg bags
22
Group of Companies “Titan” ........................................................3
PJSC “Omsky kauchuk” ...................................................................7
SBR / butadiene-methylstyrene rubbers ................................8
Synthetic latexes ..............................................................................10
Butadiene ...........................................................................................12
Methyl tert-butyl ether (MTBE) ...................................................13
Petrol for industrial purposes......................................................13
Propylene ...........................................................................................14
Propylene polymerization grade ...............................................14
Propane ...............................................................................................15
Propane fraction ..............................................................................15
Butane .................................................................................................15
Propane-butane mixture ..............................................................16
N-butane ............................................................................................16
С5 fraction ...........................................................................................17
Aluminium hydrochloride ............................................................17
Alpha-methylstyrene .....................................................................17
Cumene ...............................................................................................18
Ethylbenzene fraction....................................................................19
Butylbenzene fraction ...................................................................19
“Poliom”, Ltd ......................................................................................20
Polypropylene ..................................................................................21
Contents
GROUP OF COMPANIES “TITAN”
PRODUCTs Of ThE PJsC “OmsKy KAUChUK”
sALEs in RUssiAtel.: +7 (3812) 29-95-55e-mail: [email protected]
tel.: +7 (3812) 29-95-55 (ext. 55-50)e-mail: [email protected]
ExPORT sALEstel.: +7 (3812) 92-54-75, 29-95-55е-mail: [email protected]
PRODUCTs Of ThE “POLiOm”, LTD
ExPORT sALEstel.: +7 (3812) 79-02-07е-mail: [email protected]