abiotic reduction transformations of recalcitrant chlorinated methanes, chlorinated ethanes
Proceedings of the 2009 ; Vol. 1 - Willkommen — … · 2011-06-22 · Study on the blending of...
Transcript of Proceedings of the 2009 ; Vol. 1 - Willkommen — … · 2011-06-22 · Study on the blending of...
^|||J|.:1|IfclfctftlE
^ p4^^^^1^^^i:;^^-^;^~^:^|S!"^
*C»*§ipj
roceedings of 2009 International Conference
dvanced Fibers and Polymer Materials
Oct. 21-24, 2009
Shanghai, China
Volume I
Edited by
State Key Laboratory for Modification of Chemical Fibers and Polymer Materials
College of Materials Science and Engineering, Donghua University, China
Department of Chemistry, Stony Brook University, USA
College of Polymer Science and Polymer Engineering,* W W *
,
- i H>«
The University of Akron, USA
Chemical Industry Press
^ 4-M«,rt*a „
eiginer •
» o
CONTENTS
VOLUME I
Section A
Fiber formation, structure and properties of a new type of polyether-ester elastomeric fibers 1
KIKUTANI Takeshi
Plasma treatment on selected properties ofviscose rayon 2
KAN C. W, YUEN C. W.M., TANG T.B. and TSOI W.Y.
X-ray and birefringence analysis of plasma treated wool 6
KAN C. W, YUEN C. W.M., TANG T.B. and TSOI W.Y.
The interplay between structure formation and segmental dynamics constraining in semicrystalline polymers 10
P1ERUCCINI Marco
Effect of low temperature plasma pretreatment on the wettability and dryability ofpolyester and nylon fibres 14
KAN C. W., YUEN C. W.M., TANG T.B. and TSOI W.Y.
Copolymerization modification ofpulp fiber grafted by DADMAC under microwave irradiation 18
LIU Quanxiao, XULijuan, XU Wencai
Preparation of lignin-based polyether polyurethane and its properties 21
LIU Quanxiao, XVLijuan, XU Wencai
Fabrication, surface properties and protein encapsulation/release studies of electrospun gelatin nanofibers 24
LIXiaoqiang, SUYan, MOXiumei
The influence ofspinning solution properties on the coagulation process ofpolysulfonamide (PSA) fiber 27
YUJinlin, YANXiong, WANGXiaofeng, FENGYapei
Predicting the breaking strength and strain ofjute fibres by Weibull distribution and linear regression 30
XIA Zhaopeng, YU Jianyong, CHENG Longdi, LIULifang
Ultimate deformation ofpolyester plain knitted fabrics subjected to biaxial extension 34
ZHANG Yiping, LONGHairu, HONG Weiya
Characterization of cellulose in NaOH complex solvent by light scattering and viscometry methods 39
ZHANG Shuai, FU Changfei, LI Faxue, GULixia and YUJianyong
Dispersion and rheological aspects of MWNTs in biological sodium alginate aqueous solution 43
XIEDan, SUIKunyan, SHANXin, GAO Song
The effects of process conditions on the dye uptake of PET yarn dyed in a pilot-scale supercritical C02 dyeing
plant •••46
HUANG Gang, ZUOJinliang, XING Yanjun andDAIJinjin
The thermal and rheological properties of dyeable polypropylene (PP) blends 49
HUAXiubing, ZHANG Yu
The structure and characterization of cellulose carbamate regenerated fiber 52
YINCuiyu, SHENXinyuan
Study on the elasticity ofPTT cotton union fabric 56
CAO Qiuling, ZOU Qingyun, ZOUWenlin
Morphology and thermal property of PP/ M-PEEAM composite 59
GUOJing, HUANG Wenfei, WANG Qiao
Identification of sheep wool and cashmere based on light microscope 62
WANG Baihua, HU Zhiyu, GE Shunshun, KONGLiping, ZHANG Baoguo
Surface modification ofcellulose fibre during steam injection process 65
LIUDetao, HAN Wenjia, MO Lihuan, LI Jun
Effect of maleic anhydride grafted poly (ethylene-octene) on non-isothermal crystallization kinetics of PTT 68
WANGKunyan, LIU Yang, KAN Ruijun, CHEN Yanmo
High-order structure evolution of glycerine modified poly(ethylene terephthalate) films during uniaxial
stretching 71
SONG Ge, DAUimming, CHEN Xu, YANG Shenglin
Effect of water and pressure-induced flow deformation process on microstrcture and thermal properties of
polylactide/starch blends 74
WU Chao, TENG Cuiqing, HANKeqing, YU Muhuo
The influence of catalysts and stabilizing agents on the whiteness of biodegradable poly(butylene succinate-co-
terephalate) (PBST) copolyesters 77
WANG Ting, WO Shengli, LI Faxue, YU Jianyong
Mathematical model ofthe air jet flow field of the annular die in the melt blowing process 80
CHEN Ting, YINYi, WULili
Dissolution and degradation behaviours of cellulose with l-N-butyl-3-methylimidazolium chloride as solvent 84
ZHU Tianxiang, ZHU Fangliang, ZHANG Yumei, WANG Huaping
Influence oftransesterification on thermal properties and crystallization of PTT/ ECDP blends 87
LIXiaolin, WANG Chaosheng, LI Min, WANG Huaping
The influence of heat transfer on pore architecture of starch sponges during freeze-drying process 90
HU Qin, TU Xinxing, MA Jinghong, Xu Jian
Study on deformation of spherulite of PP prepared by simple pressure field 93
JIAO Mingli, TENG Cuiqing, HANKeqing, YU Muhuo
Determination of phase separation trajectory in the wet spinning process of PAN fiber 96
ZENGXiaomei, CHENJiangmin, ZHAO Jiongxin, PANDing
Study on the blending of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV) and hyperbranchedpolyesteramide(HBPEA) 99
SHIShengjie, CHEN Yanmo, YUHao, CHENLong, WUWenhua, LIUJun
Investigation on the molecular orientation behaviour of MJLCP fiber 102
WANLiying, LI Deli, ZHU Meifang
Dyeability of polypropylene yarns modified with hyperbranched polyesteramide 106
HUOHongya, YAN Huizhi, ZHANG Yu, CHEN Yanmo
Chemical modification, electrospinning and adsorption behaviors ofpolyvinyl chloride) 109
ZHUXinsheng, JIANG Xiaoshan, FANLijuan, SHIXiaoli
Evaluation of thermal-moisture comfort properties ofbamboo-carbon modified polyester fabrics 112
LIUJie
The performance of PSA fibers after chemical treatment 116
HOU Weili, SHENHenggen, MA Chengyu
Effects ofair gaps under clothing on heat transfer from human body 119
ZHANG Zhaohua, LIJun, WANG Min
New observations ofjets that produce nanofibers 123
HANTao, YARINAlexanderL., TRIPATANASUWANSureepom, RENEKER Darrell H.
The effects offibrillation factors for polytetrafluoroethylene through paste extrusion 127
LI Min, WANG Chaosheng, LIXiaolin, WANG Huaping
Preparation and properties of polyethylene terephthalate/ polycarbonate blending fibers through in-situ
microfiber 130
SUWangfei, RENShuxia, HUANGXiang'an
Effect ofhyperbranched poly(ester amide) on non-isothermal crystallization ofpolypropylene 133
YANHuizhi, CHEN Yanmo and WUWenhua
Phase diagram for polyacrylonitrile /ionic liquid/H20 ternary system based on a linearized cloudpoint curve
correlation 137
HUANG Weifeng, JIANG Guangsen, WAN Shengxing, ZHANG Yumei, WANG Huaping
Surface characterization ofNylon6 films treated by He/02 atmospheric pressure plasma 140
GAO Zhiqiang, QIU Tiping
Research on photopolymerization mechanism and improvement of curing performance of UV ink 143
CHEN Guangxue, TANG Baoling, CHEN Qifeng
The influence oftwo-step saturation steam drawing on the properties ofPAN Precursor 147
SHE Youzhi, PAN Ding, TANLianjiang
Formation and mechanical properties of high-strength poly(3-hydroxybutyrate-co-hydroxyvalerate) fibers 150
LUAN Yixian, GU Chunju, WU Wenhua, ZHUMeifang
Study on rheological property of different poly (phenylene sulfide)s materials 154
ZHANG Kun, CHENLong,ZHU Meifang
Determinant material parameters ofthe performance of PTT/PET side-by-side bicomponent fibers 157
LUOJin, WANGKang, WANG Fumei
The false twist compact drafting technique for cotton ring spinning and optimization design ofits device 161
FU Jiang, YU Weidong
Mechanical model of sirospun composite yarn 164
ANXianglong.YU Chongwen
Study on salicylic acid rare eagrth complex/ polyurethane materials 168
GAOLijun, ZHOULiming, SUN Guanghui, MASongtao, FANG Shaoming, ZHANGXiaoyu, GUOLiangqi,HUMin, LIU Chunsen
Synthesis and properties of novel polyurethanes with excellent transparency 172
GAO Lijun, ZHOU Liming, FANG Shaoming, ZHENG Hua, GUO Liangqi, SUN Guanghui, HU Min, LIU
Chunsen, MA Songtao
SBR/BR blend reinforced by modified silica with KH-550 175
WUWeili, WANGJing
Study on rheology behavior of modified p-aramid copolymer 179
WANG Jin, CHENLei, YUJunrong, HUZuming
Structure and tensile properties ofthe pre-drawn acrylic fiber during second-stage drawing process 182
ZHANG Li, ZHOUJun, ZHUXinjun, ZHANG Yumei, WANGHuaping
Dynamic rheological properties of bamboo cellulose/ionic liquid solution 185
HE Chunju, MA Bomou
Studies on degradation behaviors of bacterial cellulose in l-N-butyl-3-methylimidazolium chloride 188
DINGZheyin, SHENXinyuan
Studies oftensile properties and weave process on basalt filament yarn 191
LIXine
Study on the on-line measurement ofdrafting force on drawing frame 195
ZHANG Zhiliang, YU Chongwen, GONG Tiwei
The preparation and characterization ofpoly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles 198
LIU Yang, LIUJun, CHENYanmo, ZHANG Yu, SUN Cheng, HUANG Zhengqian, CHENLong
Research on the heat-resistant microencapsulated phase change materials by interfacial polymerization 201
X1N Changzheng, WANGYanwei, WANGLina, HUANGXiang 'an
Preparation of biodegradable PHBV-g-PGMA-g-PBAT by reactive blend 204
WEIFayun, LIUJun, WUChunlei, ZHANG Yu
Miscibility and mechanical properties of SEBS/polylactide elastomer blends 207
ZHANG Wei, WEIFayun, CHENLong and ZHANG Yu
Crystallization kinetics ofpoly(ethylene terephthalate)/ poly(ethylene 2,6-naphthalate)/DBS blends 210
LI Guijuan, Guan Lei, MUXingwen
Effect oflaser engraving process on the surface properties of cotton fabric 213
KAN C. W, YUEN C. W.M. and CHENG C. W.
Properties of toughened degraded polypropylene with EPDM 217
CHENG Fengmei, LIHaidong, CHENDajun
Validation & control on the convergence point in sirospun 220
SHI Qing, ANXianglong, YU Chongwen
A method of making square 8-hole hollow polyester fiber 224
MA Shilong, YANG Chongchang, WANG Huaping
Study on copolymerization of acrylonitrile and itaconic acid in dimethylsulfoxide to high conversion 228
SHUYi, QUANHaiyu, ZHOU Meihua, PAN Ding
Isothermal crystallization and melting behavior for novel cationic dyeable copolyester 231
CHEN Bin, GULixia
Study on the permeability ofthick-section reinforcement during LCM process 234
LIANGXiaoning, LI Wei, LUO Yongkang, ZHANG Jinnan, LIHaitao
Preparation of MAH grafted POE and its application in the modification of EVA 236
WANG Lixian, GUO Qiang, PAN Guoliang, XU Cheng
Numerical analysis of air gap effect on PAN as-spun fiber formation in dry-jet wet spinning 239
YIN Han, CHEN Dajun
The dynamic rheological behavior of polyimide (P84) spinning solution 242
XIANG Hongbing, SHEN Shuaifeng, LIU Liqi, CHEN Lei, YU Junrong, ZHUJing, HUZuming
Section B
Study on the tensile strength of flexible composites based on Weibull model 245
WANGZexing, JIANG Jinhua, CHENNanliang
A study on the puncture properties ofbi-axial warp knitted flexible composites 249
LUOTixi.NINGHehua
Preparation of hydroxyl terminated poly (dimethyl siloxane) (PDMS) open networks and its IPN system with
poly (2-hydroxyethyl methacrylate) (PHEMA) 252
TANG Qi, YUJunrong, CHEN Lei, ZHUJing, HUZuming
The research ofpreparation and characterization ofPET/CB bottle 255
GUXiaohua, LI Chuncheng, NIUShuqing, LIShiwei
Sound absorption properties of elastomer composites consisting of chlorinated polyethylene and seven-hole
hollow polyester fibers 258
JIANG Sheng, YANXiong
Electrospun thermoplastic polyurethane with anisotropic mechanical properties as biomedical scaffold 261
CHEN Rui, KE Qinfei, MOXiumei, MORSI Yos
Effect of HPC on the thenno-sensitive and hydrophilicity ofPAN films 264
LIHui, LIXiaoyan, ZHANG Jing, ZHOU Qinfang, ZHOU Yongxiang
Preparation and thermal stability ofPES-C/organic vermiculite composite membrane 267
MAOQing-hui, ZHANG Xuan, KAN Hong, XUHong,MAO Zhi-ping
Effect of chemical and enzymatic modification on the performance of wool 270
ZHANG Ruiping, CAIZaisheng
Effect of twisting on properties of ultra-high modulus polyethylene filament tow treated by atmospheric pressure
plasmajet 274
WANG Chunxia, QIU Yiping
Frequency spectral analysis on AE signals of damage mechanisms in PE/PE composites 278
WANG Xu.ZHANG Huipin, YANXiong
Characterization ofstretch elongation and elastic recovery of PTT/PET bicomponent filament 282
LUO Jin, WANG Kang, WANG Fumei
Preparation and properties of dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) fiber 286
ZHANG Too, JINJunhong, YANG Shenglin, LI Guang, JIANG Jianming, LILan
Study on the surface modification oftechnora fiber 289
YOUZhiqiang, CHENLei, YUJunrong, ZHUJing, HUZuming
The core-skin structure ofPAN-based carbon fiber and its effect on the tensile strength 293
YAO Jiangwei, YUWeidong
Study on the gelation behavior of concentrated polyacrylonitrile/dimethyl sulfoxide solution 296
TANLianjiang, PANDing
Preparation of hydrophilic nanofiber scaffolds ofpoly(e-caprolactone) and poly(vinyl pyrrolidone) blends 299
FENGShuqin, SONG Huifen, SHENXinyuan
Study on die-swell ofmeta-aramid solution 302
DONG Qinli, LIU Liqi, CHEN Lei, YUJunrong, ZHUJing, HUZuming
A progressive damage model for PE/PE thermoplastic composite laminates 306
YANGBiling
Photodegradation of aramid fiber under tensile stress 309
CAI Guangming, TAO Yukun, WANG Xiaoling, YU Weidong
Mechanical and airtight properties of the high-low temperature resistance multilayer composite material 312
CHENJinjing, YUWeidong
Structure development during thermal-induced gel spinning of polyacrylonitrile/dimethyl sulfoxide/water 315
DUWeiping, YE Wu, CHENHuifang, PAN Ding
The structure and properties ofPAN fibers prepared by plasticized melt spinning 318
WANGZhaohua, HAN Keqing, RONG Huaiping, YUANXiangkai, YU Muhuo
Heat and moisture transfer in high-property refractories under the intensive heat flux or fire exposure 321
WANG Xiujuan
Study on the spinnability in gel spinning of PAN precursor fiber 325
SONG Kunyang, TANLianjiang, WUZhengxing, PAN Ding
Electrospun cellulose acetate nanofiber mats ofnaproxen esters 329
WUXiaomei, BRANFORD-WHITE ChristoperJ, ZHULimin
Synthesis and properties of HDPE-g-MAH fibers 333
CUI Zheng, YUHao, ZHUMeifang
Dispersion ofcarbon black and electrical conductive properties ofCB/PBT composites 336
LIUXin, XIA Qingming, Gao Jingtao, ZHANG Qinghua
Research on the hydrophilic finish for PET staple fibers used in spunlace nonwoven 339
WANG Hong, PANG Lianshun.JINXiangyu, WUHaibo, YINBaopu
Study on the preparation of UHMWPE fiber tape by using Weibull statistics 342
ZHOUYuanqi, YUJunrong, CHENLei, HUZuming
Effect of solarization on color fastness and mechanical property of colored PMIA fibre 346
LIU Liqi, ZHANG Yuanjing, CHEN Lei, XJANG Hongbing, DONG Qingli, YOU Zhiqiang, GUO Qing,
ZHOUYuanqi, SONGXiaolei, YU Junrong, ZHUJing, HuZuming
The effect ofultraviolet stabilizer on the UV stability ofpoly (p-phenylene benzobisoxazole) fibers 349
FANG Weiyu, JINJunhong, YANG Shenglin, LIGuang, JIANG Jianming
Surface properties ofacrylic fiber with oxygen plasma treatment 352
LIU Yanchun, Bai Gang
The drawing and mechanical properties ofgel-spun HMWPE fiber 354
GUO Qing, ZHOU Yuanqi, CHENLei, LI Shanshan, LIULiqi, ZHUJing, YUJunrong, Hu Zuming
Effect of dry and wet heat treatment on elastic properties of PET/PTT bicomponent fibers 358
CAILei, LIFaxue, WANG Xueli, QIAN Jingfang, YUJianyong
Study ofproperties ofmolding plastics ofmotor commutator improved by glass fiber -361
WANGJian, LVJian, XUXiao-wei, CHENG Peng
Surface modification and interfacial adhesion ofpolyimide fibre byphosphoric acid treatment 364
SHEN Shuaifeng, XJANG Hongbing, CHENLei, YUJunrong, ZHUJing, HUZuming
Effects ofmicro morphology on properties of easy cationic dyeable co-polyester fiber • -367
ZHONGJing, YUJianyong, LIULifang, XIEHao
Effects ofjute fiber pretreatments on mechanical properties ofjute/PP composite 370
LUO Qi, HUANG Liqian, YUJianyong
Acoustic emission characterization of damage modes in self-reinforced polyethylene composites 374
YANG Biling, ZHANG Tonghua
Study on a novel elastomer applied in measurement ofextravehicular liquid cooling garment 377
YANG Kai, JIAO Mingli, ZHANG Weiyuan
Study on non-isothermal crystallization kinetics of TLCP/PPS in-situ microfibrils blend fibre 380
LIAO Qian, WANG Yimin.ZHUANG Yuanyuan
The effect of heat treatment on the mechanical properties ofpolyacrylonitrile fibers 384
SHIYanping, CAIZetian, WANG Guangxue, YAN Cheng, GUOFan, ZANG Peng, WU Qilin
Crystallization and impact strength ofpolypropylene/shell powder composites 387
LIUShujia, SHIJiawei, WANG Yimin
Preparation and properties ofthe novel disulfonated poly(p-phenylene benzoxazole) (DSPBO) fiber 390
CAOJia, JINJunhong, YANG Shenglin, LI Guang, JIANG Jianming
Objective evaluation of the interface dynamic pressure performance of novel elastic fabric 394
WANG Yongrong, YAO Yuan, ZHANG Peihua
Thermal properties ofthermotropic liquid crystalline polymer(TLCP) fiber 398
ZHUANG Yuanyuan.LIU Shujia, LIAO Qian, WANG Yimin, WANG Yanping
Synthesis and characterization ofTV-methylpolyborosilazane as a precursor of Si-B-N ceramic fibers 401
ZHAOXi, LIShutong, HANKeqing, ZHANG Hui, YUANJia, PENG Yuqing, YU Muhuo
Studies on gelation of PAN/DMF solution and properties of the fibers 404
ZHANG Yiwei, TENG Cuiqing, YU Muhuo
Simulation on the tensile property of3D woven composites 407
MA Leilei, TIAN Wei, LIULei, LIUShuainan, ZHU Chengyan
Investigation on the gradient solidification processing ofPAN precursor during dry-jet-wet spinning 410
LIANG Tile, DONGRuijiao, ZHANG Jian, ZHAO Jiongxin, ZHANG Youwei, PANDing
Melt spinning preparation of polyoxymethylene fibres and effects ofpost-treatment on their properties 414
WANG Huanlian, LANJiamvu, WANGXinlei, CHEN Sheng
Uniform etching study ofhigh performance polyethylene terephthalate fiber in continuous atmospheric plasma 418
LINJie, LUialing, WUJing, XUJinzhou, GUO Ying, YANG Ping, SHIJianjun, ZHANG Jing
Toughening of epoxy resin using reactive liquid (CTBN) rubber 422
YANG Guodong LlShanshan, ZHU Shigen, LIN Sen, LUO Yilan, YANG Zhanfeng
Processing and properties ofPMR polyimide composites reinforced with 3D woven glass fabric 426
XIEJianfei, ZHANG Tingchen, CHENG Sichen, QIUYiping
Study of the grafting copolymerization modification of caprolactam onto hardwood pulp fiber: Effects on the
physical properties of the grafted pulp 430
WANG Lijun, HANQing, XIUHuijuan, XIE Yimin
Thermal protective performance of fire protective composite fabrics 434
HAOLicai, YUWeidong
Coupled heat and moisture transfer properties of new regenerated cellulosic fabrics 437
WANG Yunyi, LUun, YUQingwen, HUANG Ziwei
Thermal degradation kinetics ofpoly (p-phenylene terephthalamide) fiber measured by thermogravimetry 441
LIUJunjie, YU Weidong
Fabrication and characterization of short silicon carbide fiber-reinforced PMR polyimide composites 445
XUEJing, XIEJianfei, ZHAO Da, QIUYiping
The study on oxidation resistance property of PSA needle-punched nonwoven fabric 449GONGXingsong, YUZhenhuang
Precracked tearing properties of coated bi-axial warp knitted fabrics under bi-axial and multi-axial loads 452
LUO Yixi.HUhong
Synthesis and characterization of a novel preceramic polymer to Si/B/N/C ceramic fiber 455
ZHANG Hui, HANKeqing, ZHAOXi, YUAN Jia, PENG Yuqing, YUMuhuo
Effect of hydrogen bobnding interactions on the damping properties of the organic hybrids of chlorinated
polyethylene and hindered phenol 458
DINGXinbo, LIUTao, YANXiong
Carbon fiber paper for fuel cell electrode 461
DUAN Qiongjuan, WANGjiong, WANG Biao, WANGHuaping
The research and application of new-style ceramic spinneret for preparation PAN precursor 464
LIPengzhou, CHENHuifang, PAN Ding
Effects ofspinning solution on properties of carbon fiber precursors prepared by liquefied wood 467
ZHAO Guangfie, AM Xiaojun
Time dependent recovery behaviours ofpolyester multifilament yarns 471
CHENSihai, WANG Shanyuan
Quasi-static tensile property test of the 3D thick orthogonal woven aramid fabric 474
ZHANGKun.GAO Tianqi, CHEN Yu,ZHOU Qin, YAOLan, QlUYiping
Improvement ofinterfacial strength of cotton fabric/ PTFE laminates 477
CAOXinwang, LIFaxue, CHEN Yiren,YUJianyong
Crystallization kinetics and miscibility of iPP/PcBR blends 481
SUNHui, YUBin, SHENGJing
Preparation and electrical properties of multiwalled carbon nanotubes/low density polyethylene/ polystyrenecomposites 484
XIA Qingming, LIUXin, ZUO Cheng, ZHANG Qinghua
Composites for bone repair: phosphate glass fibre reinforced PLA with varying fibre architecture 487
PARSONSAndrew J., AHMED Ifty, JONES I. Arthur, SCOTCHFORD Colin A., WALKER Gavin S., RUDDChris D
Anti-delamination performance of 3D bi-axial spacer weft-knitted fabric and dynamic responses of its reinforced
composite 491
ZHANG Mingxing, HU Hong
Delamination damage analysis of UHMWPE/LDPE thermoplastic composites based on acoustic emission 494
ZHANG Tonghua, YANGBiling
Free radical copolymerization of acrylonitrile with different comonomers in l-buty-3-methylimidazoliumchloride 497
ZHANG Qing, DENGJing, ZHANG Yumei, WANG Huaping
The influence ofspunbonding process parameters on the fiber diameter 501
ZHAO Bo
Structure changes and tensile properties of poly(4 4 -diphenyl-sulphone terephthalamide-co-3 3 -diphenyl-
sulphone terephthalamide) fiber during drawing process 504
WU Wantao,XJE Chao, ZHANG Li, ZHANG Yumei, WANG Huaping
Formation of microstructure of mesophase pitch-based carbon fibers and its effect on mechanical properties 507
QINXianying, YANG Changling, LV Yonggen, XIAO Hao
Study on the modified epoxy resin system as composite matrix cured under low temperature 511
ZHANG Baohua, CHENBin, ZHANG Yumei.ZHANG Yajing, XUHong, YEJundan, WENG Yanqing
Research on dyeing behavior of basalt filament and rock wool part 514
ZHANG Hongjie, ZHONG Zhili,Liu Huawu andLIFengyan
Influence of the microstructures of porous electrospun poly- (lactic-co-glycolic acid)/carbon nanotubes
composite nanofibers and macroporous films on the growth of fibroblast cells 517
LIUFujuan, WANG Shanyuan, SHIXiangyang
Synthesis, characterization and properties ofa reactive thermotropic liquid crystalline polymer 521
WEI Chun, LU Weizhong, GONG Yongyang
Preparation ofhigh performance biobased composites from poly(lactic acid) and microcrystalline cellulose- •—525
XIAO Lin, FUBiao, YULongjiang, YANG Guang
Preparation and characterization of cellulose/polypyrrole conducting composite fibers via in-situ polymerization 529
DING Chimyue, QIANXueren, SHENJing, ANXianhui
Preparation and properties of DMC/MVQ composites 532
WU Weili, FENG Yimsheng
Combination of multi-layered fabrics offirefighter protective clothing 536
LUun, ZHANG Xianghui, WANG Yunyi, WANG Xiaoqiong, HANJiashen
A Novel PVA/[Bmim]OH blend membrane for anion exchange membrane fuel cells 540
ZHUXiuling, WANG Huaping
Preparation of microencapsulated red phosphorus and characterization of flame-retardant polypropylene 543
ZHAO Ming, LUXiaozhong, GU Kai
Section C
Structural studies on high tenacity Ny6 fiber and polyester-based films 546
1SHIHARA Hideaki
Breakthrough polymer nanofiber technology for water purification 550
HSIAO Benjamin S„ CHUBenjamin
Gene delivery with nanofibrous scaffolds 554
CHU Benjamin, LIANG Dehai, HSIAO Benjamin S.
Some protein fibers from bioenergy crops 559
YANG Yiqi
Morphology and properties ofPVDF/PS blend membranes 560
SUNJunfen, HE Chunju, WU Lishun
Effects of evaporation time, temperature of evaporation medium and casting solution on properties and structure
ofpoly- (vinyledene fluoride)/polyethersulfone blend membrane 563
WULishun, SUNJunfen, WANGQingnti
Separation and purification of papain with Cibacron Blue F3GA carrying electrospun nylon/ cellulose acetate
nanofiber affinity membrane 567
ZHANG Haitao, NIEHuali, ZHULimin
Synthesis and properties ofhigh temperature resistant copoly- (aryl ether ketone)s containing fluorophenyl group 571
XIEJuan, PENG Weiya, ZHUAnfeng, LI Guang, JIANG Jianming
Thermal yellowing properties of the polysiloxanes modified with perfluorocarbon groups as resin on the
cellulose fiber 575
XIEKongliang, SHENHongwei, HOUAiqin, CHENYi
Preparation and properties ofpolyvinyl alcohol / carboxymethyl chitosan blend films 578
PAN Wei, HEXiaowei, CHENYan
Preparation and properties of organic-inorganic hybrid low dielectric materials 581
XUHongyao, ZHANG Ji, YANG Benhong.ZHANG Chao, GUANG Shanyi
The moisture comfort property of "U" shaped polyester knitted fabrics 584
KE Baozhu
Compatibility ofhydroxypropyl cellulose and polyvinyl alcohol 587
DAIBeibei, SHENXinyuan
Study on a novel polypropylene-based magnetic composite 590
ZHAOXiulan, YUChengbing, ZUJianhua, ZHANGJianqiu, ZHANG Yun
Superabsorbant semi-IPN hydrogels based on PVA and PVP 593
WUWen, WANG Dongsheng
Effect offunctional polysiloxanes modified with perfluorocarbon groups on the color ofdyed cellulose fiber 596
HOUAiqin, CHEN Huawei, XIEKongliang
Washing durability of superhydrophobicity of acetylated cellulose fabrics 599
YU Yunyi, HUANG Wenqi, XING Yanjun, DAI Jinjin
Improvement ofwashing durability ofhydrophobic cotton fabrics by polyacidic spacers 603
HUANG Wenqi, YUYunyi, XING Yanjun, DAIJinjin
Acyclovir-loaded PAN nanofiber membranes prepared using a special electrospinning process 607
YU Dengguang, ZHANG Xiaofei, WUXiaomei, CHRISBW, ZHULi-Min
High optical transparency and low dielectric constant of organosoluble polyamide based on 1, 2-Bis- (4-amino-
2-trifluoromethylphenoxy) benzene 610
LI Penghui, WANG Chenyi, Li Guang, JIANG Jianming
High glass transition and optical transparency ofnovel polyimide containing 4-/ert-butyltoluene moiety 614
WANG Chenyi, LIPenghui, LI Guang, JIANG Jianming
Preparation of microfibers by ice-segregation-induced self- assembly of hollow PNIPAM microgels 617
LIUXiaoyun, JIANG Zijun, YANG Jianmao, ZHA Liusheng
Flexible conducting polyaniline/polyacrylonitrile composite films 621
ZHAI Guangzhao, QINZongyi, LIHumin, CHENHuifang, PAN Ding
Preparation and characterization ofhigh flux ultrafiltration composite membrane based on nanofibrous substrate
and cellulose acetate coating 625
WEIJielin, WANGXuefen, ZHANG Kai, ZHOUKun
Study of electrospun fibers of the complex of Cellulose Acetate-l\3\3'-trimethyl-6-nitrospiro (2H-1-
benzopyran-2,2'-indoline) 628
LIUShuiping, WEIFayun, CHENYanmo
Studies on hydrostatic head ofpolypropylene SMS composite nonwovens 632
FENG Yan, CHEN Gang
Modified polypropylene fabrics adsorbent for effective Vanadium adsorption 635
ZUJianhua, WENyunluo, YOUNG Chang Nho, JEUNJoon Pyo, YANFeng, YUChengbing
Development ofknitted structures based on biomimetics for comfort clothing 638
ZHOU Yanwei, XJE Meidi, HUHong.LIU Yanping
Surface modification ofPVDF microporous membrane via a novel "green" process 641
MENG Jianqiang, CHEN Chunlin, NI Lei, ZHANG Yufeng
Surface modification ofpolyacrylonitrile fibers for superabsorbent fibers 645
HUFanying, SHENXinyuan
Evaluation temperature and strain sensing properties ofelectrically conductive elastic fibres 649
FANQinqing, QIN Zongyi, ZHAO Chenyang, GONGJinghua, ZHUMeifang, LILongfei, DING Yongsheng
The synthesis and characterization ofmulti-branched rare earth luminescent materials for fluorescent fiber 653
XIA Lei, XIPeng, CHENG Bowen
Experimental study on the influence of multiple mechanical properties on clothing pressure of DOW XLA
elastic fabric 657
YAO Yuan, WANG Yongrong, ZHANGPeihua
In vitro degradation ofPGA, PLA and its blends produced by melt spinning 660
WANG Hongying, ZHANG Peihua, GUO Zheng