Pro-GET-onE: energy efficiency and seismic safety · 2019-02-06 · 2 Top tips (to submitting a...
27
www.progetone.eu Proactive synergy of inteGrated Efficient Technologies on buildings’ Envelopes Pro-GET-onE: energy efficiency and seismic safety University of Bologna [email protected] Brussels, EASME Info Day 22 January 2019 Call: H2020- EE-10-2016-IA- Innovation action This project has received funding from the EU’s Horizon 2020 IA GA No 723747 The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
Transcript of Pro-GET-onE: energy efficiency and seismic safety · 2019-02-06 · 2 Top tips (to submitting a...
www.progetone.eu
Proactive synergy of inteGrated Efficient Technologies on buildings’ Envelopes
Pro-GET-onE:
energy efficiency and seismic safety
University of Bologna [email protected]
Brussels, EASME Info Day 22 January 2019
Call: H2020- EE-10-2016-IA- Innovation action
This project has received funding from the EU’s Horizon 2020 IA GA No 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
IMPACT-CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
(concept and) INSPIRATIONS
Assistant Buildings’ addition to Retrofit, Adopt, Cure And Develop the Actual Buildings up to zeRo energy, Activating a market for deep renovation
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
Greater efficiency, attractiveness and marketable renovation
can only be achieved through a
holistic and integrated set of technologies,
in which all the different requirements
(energy, structural, functional)
are optimally managed.
- energy and non-energy related benefits-
Where we started from…
Objectives
InteGrated Efficient Technologies
ENERGY IMPROVEMENT
SEISMIC STRENGTHENING
FACADE ADDITION
Envelope Attractiveness
Structure
“GET” system
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
IMPACT- CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
Innovation/AmbitionMulti-Benefit solutions for:
- Structural-seismic requirements;
- Energy requirements;
- User-orientated requirements.
Simulations modelling using FEM software (EN 1998), performed for different residential buildings, have shown an overall reduction of horizontal displacements of the retrofitted structures with a percentage from the 15% up to the 60% and more.
Energy requirements
As a whole, GET
can be equipped
with several
installation plants
Plug and play
External structures: strengthening by GET structure (2), energy saving and plug-and play plant distribution (1, 4, 6) increased comfort and living areas for residents, additional new units (3).
Innovation/Ambition
User-orientated and market requirements –attractiveness for users
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
IMPACT- CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
[1 - (710/850)] = 16%. If we include the value of extra surface by 50%, the reduction will be [1 - (560/850)] = 34%.
Time reduction
Energy reduction
Cost reduction
Impact
Impact
Impact - Case studies
STUDENT HOUSE AT THE CAMPUS OF THE UNIVERSITY OF ATHENS
Case studies
Case studies
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
IMPACT- CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
Consortium and work plan
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
IMPACT- CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
Communication & Dissemination
+ association of technical experts
(concept and) INSPIRATIONS
OBJECTIVES
INNOVATION/AMBITION
IMPACT- CASE STUDIES
CONSORTIUM – WORK PLAN
COMMUNICATION
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
Pro-GET-onE
WHERE INNOVATION IS
?
Final remarks
increase the co-benefits of energy renovation,increase the expected lifetime of the buildings, increase the desirability of transformation from users and owners. tostimulate the excellence in energy performance up to the ambitious nZEBs targets in the most inefficient buildings of the modernity (the majority of EU buildings)
INNOVATION/
AMBITION
VS
BARRIERS
No
technological innovation
with no
Legislative change
To achieve nZEB in existing buildings, Public Bodies and Municipalities from Member States should promote non energy related benefits like market and social attractiveness, safeness, urban densification. To do so, they may waive the existing regulations in terms of:
- urban capacity, - standard limits, - ownership constraints related to the land use.
The possibility to make exceptions to the existing local regulative framework shall be closely linked to the maximum exploitation of solutions in terms of energy efficiency (nZEB building) and the minimum environmental impact.
Final remarks- Suggestion
OBJECTIVES
CONTEXT for the replicability
(concept and) INSPIRATIONS
CONCEPT (and methodology)
Innovation/AMBITION
CASE STUDIES
TAILORED ORIENTED SOLUTIONS
FINAL REMARKS
TOP TIPS
Content
The project has received funds from the EU’s H2020 IA under GA no 723747The communication reflects only the author’s view and the Research Executive Agency for SMEs is not responsible for any use that may be made of the information it contains
2 Top tips (to submitting a winning proposal) from Pro-GET-onE
• Be visionary, have something you stronglybelieve in and that could make the difference
• Respond to the topics, but go beyond thetopics – i.e. by considering energy and nonenergy related aspects -
www.progetone.eu
Proactive synergy of inteGrated Efficient Technologies on buildings’ Envelopes
Brussels, EASME Info Day 22 January 2019
University of Bologna [email protected]
THANK YOU
