Price quote for: Aftermarket Tractor/Skidsteer …. #416-1216 MINNESOTA PRICING PAGES (Typed...

SEQ. #416-1216 MINNESOTA PRICING PAGES(Typed Responses Required)

December 2016

Aftermarket Tractor/Skidsteer Attachments

Price quote for: Aftermarket Tractor/Skidsteer Attachments

Vendor Name:Contact Person:Street Address:

P.O. Box:City, State, Zip

Phone #:Toll Free #:

Fax #:Email Address:

1.0 Manufacturer's Name:

Attachment Description:

Warranty Term (months, years):

Percent Discount (%) to be applied to Price List:

Date & I.D. of the Price List:

2.0 Delivery Charges:(SEE SPECIAL TERMS AND CONDITIONS)

DELIVERY STARTING POINT (City)(State & Zip Code)

Price Per Loaded Mile

Minimum Delivery Charge

3.0 Price for additional Service Manual:

Price for additional Parts Manual:

4.0 Installation Services - Per Hour (Shop Labor Rate) $90 Installation services may be requested on an "as needed" basis.(See Special Terms and Conditons)

Edney Distributing Co., Inc.John Wilkinson8485 215th St W

Danuser

[email protected]

Lakeville, MN 55044952-469-5267

No Charge

No Charge

888-443-3639952-469-5269

5%

5-20-16 Danuser PRO Hydraulic Earth Auger

NO FLAT RATE ALLOWED

$0.40

Fulton

Drive Unit - 5 Years, Mount/Augers - 1 Year

Missouri, 65251

Hydraulic Earth Auger

mailto:[email protected]

RESPONDER'S NAME:

SWIFT EVENT NUMBER: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS, T-632(5) Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will providethe required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions beforeany State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., 0000123456-001.

COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAMEEdney Distributing Co., In0000215024/003 8485 215th St W/Lakeville MN/5504952-469-5267 John WilkinsonAdkins Equipment, Inc. 0000208093/001 18323 Cty Hwy 21/Detroit LaMN/5650218-847-4587 Jeff AdkinsBobcat of Bemidji 0000251301/001 3516 Irvine Ave N/Bemidji MN/5660218-751-4660 Dave NeilsenBobcat of Duluth 0000236269/002 4610 W Arrowhead Rd/Dulu MN/5581218-727-7377 Dan LindeButler Machinery 0000204147/001 3401 33rd St S/Fargo ND/5810 701-298-1749 Troy DeWiteJaycox Implement 0000194422/001 410 West Roehn/Luverne MN/5615507-283-2319 Mark OmmenKesteloot Enterprises 0000295830/001 2517 Co. Rd 8/Marshall MN/5625507-532-0100 Daren KestelootKibble Equipment 0000364257/001 1150 South Victory Dr/Mank MN/5600507-387-8201 Ken WagnerLano Equipment 0000213525/001 1015 Hwy 212 W/Norwood MN/5536952-467-2181 Jack LanoLano Equipment 0000193199/003 6140 Hwy 10/Anoka MN/5530763-307-2811 Scott FaheyMelrose Implement 0000802356/001 Hwy 13 South/Melrose MN/5635320-256-4253 Dave WenkerMid-Central Equipment 0000232112/001 50106 US Hwy 210 W/HennMN/5655218-583-4124 Dick TranaMiller-Sellner Implement, In0000198622/001 22024 State Hwy 4/Sleepy EMN/5608507-794-2131 Doug MillerMinnesota Equipment 0000197372/001 13725 Main St/Rogers MN/5537763-428-4107 Dan ScharberNelson Equipment 0000210256/001 17270 US 59/Thief River Fa MN/5670218-681-1997 Joel NelsonNiebur Tractor & Equipmen 0000268650/001 14380 240th St E /Hastings MN/5503651-437-3531 Dan BeisselNorthland Farm Systems 0000208304/001 3695 Hoffman Dr N/Owaton MN/5506507-451-3131 John LoseeOlson Power and Equipme 0000197590/001 38560 14th Ave/North BrancMN/5505651-674-4494 Dan OlsonRDO Equipment 0000199158/011 1254 S. Tower Rd/Fergus F MN/5653701-526-6665 Jason HintermeisterRDO Equipment 0000199158/013 110 Michael St/Hawley MN/5654701-526-6665 Jason HintermeisterRDO Equipment 0000199158/010 2900 Main Ave SE/MoorheaMN/5656701-526-6665 Jason HintermeisterSmiths Mill Implement,Inc. 0000197059/001 63065 206th St/Janesville MN/5604507-234-5191 Rick EichhorstTitan Machinery 0000251892/015 6340 Hwy 101/Shakopee MN/5537952-445-5400 Fred SengerTitan Machinery 0000251892/004 315 Hwy 28 E/Graceville MN/5624320-748-7277 Gary Hoffman/

Shantelle FindlayTitan Machinery 0000251892/010 500 Ingersoll Ave/CrookstonMN/5671218-281-4668 Craig MorganTitan Machinery 0000251892/023 2491 St Hwy 200/Ada MN/5651218-784-2321 Steve RudeTitan Machinery 0000251892/011 17108 US Hwy 59 NE/Thief MN/5670218-681-1423 Jay KnottTitan Machinery 0000251892/012 207 South Borud St/Winger MN/5659218-938-4131 Kathy IversonTjosvold Equipment 0000202238/001 5352 285th Ave/Granite Fall MN/5624320-564-2331 Jon TjosvoldTruman Welters Tractor an 0000193702/001 1600 Hwy 55 E/Buffalo MN/5531763-682-2200 Jon FerrisWabasha Implement 0000212699/001 840 N Wabasha/Plainview MN/5596507-534-2004 Jack Decker

of 13Form No. 3410 20 May 2016

TO PRICE A COMPLETE UNITDrive Units (pgs. 2-3) Hoses & Couplers (pg. 2)Mounts (pgs. 4-5) Augers (pgs. 5-10) Auger Accessories (pgs. 11-12) Repair Parts (pgs. 12-13)Freight

TOTAL

______________________________________________________________________________________________________________________________

__________________

PRO EARTH AUGER PRICE LIST

Professional strength for extreme applications, units range from 6 - 60 GPM and up to 3000 and 5000 PSI. Mountings are available for front-

end loader, skid-steer, excavator, mini-excavator, and backhoe.

5-Year Warranty

500 E. 3rd St. P.O. Box 368

Fulton, MO 65251

Tel: (573) 642.2246Fax: (573) 642.2240Email: [email protected]

www.danuser.com

of 13Form No. 3410 20 May 2016

Price Sheet - PRO Auger Systems www.danuser.com573.642.2246

MODEL 615 $1,899.00

Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox Ratio

2-9/16” Rd. Part No. 2” Hex Part No. Approx. Ship Weight (lbs.)

GPM68

101215

RPM3344556682

PSI200025003000

Ft.-lbs.111513931672

Speed Torque

24”6 - 15 GPM3000 PSI1500 PSI4.08:1

1006110062154

MODEL 1025 $1,899.00



GPM1014182025

RPM3955707898

PSI200025003000

Ft.-lbs.156919622354

Speed Torque

30”10 - 25 GPM3000 PSI1500 PSI4.08:1

1001010011156

MODEL 1530 $2,035.00



GPM15202530

RPM45607590

PSI200025003000

Ft.-lbs.204525573068

Speed Torque

36”15 - 30 GPM3000 PSI1500 PSI4.08:1

1001510016157

MODEL 2035 $2,240.00



GPM20253035

RPM47597182

PSI200025003000

Ft.-lbs.260532563907

Speed Torque

36”20 - 35 GPM3000 PSI1500 PSI4.08:1

1002010021159

PN DESCRIPTION WT. PRICE 10047 Cross Port Relief Valve

(required for pressures exceeding 3000 PSI)7 $345.00

PN DESCRIPTION WT. PRICE 10050 1/2” HOSE KIT with flat face ISO couplers 14 $213.0010051 3/4” HOSE KIT with flat face ISO couplers 19 $295.0010171 3/4” HOSE KIT with flat face ISO couplers

(for models 2545H & 3060H, not to exceed 45 GPM)19 $295.00

10043 1/2” HOSE KIT (includes fittings NOT couplers) 10 $140.0010044 3/4” HOSE KIT (includes fittings NOT couplers) 14 $222.0021350 Front-end loader 3/4” HOSE KIT, 25’ long with flat

face ISO couplers and pioneer couplers. Mounting bracket included for bolting or welding.Hardware not included.

35 $395.00

Hoses are 96” long with abrasion sleeves3/4” hoses REQUIRED for 20 GPM or more

Flat face ISO couplers

of 13Form No. 3410 20 May 2016


MODEL 2545H $3,670.00

Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox RatioNO DRAIN LINE REQUIRED

2” Hex Part No. Approx. Ship Weight (lbs.)

GPM2530354045

RPM56677990

101

PSI200025003000

Ft.-lbs.272734094090

Speed Torque

48”25 - 45 GPM3000 PSI400 PSI23.72:1

10075226

MODEL 3060H $3,885.00



GPM3040505560

RPM52708796

105

PSI200025003000

Ft.-lbs.350343795255

Speed Torque

48”30 - 60 GPM3000 PSI400 PSI23.72:1

10076235

MODEL HP-3060H $4,465.00



GPM3040505560

RPM52708796

105

PSI350045005000

Ft.-lbs.613178838759

Speed Torque

48”30 - 60 GPM5000 PSI400 PSI23.72:1

10078245

MODEL HP-2545H $4,260.00



GPM2530354045

RPM56677990

101

PSI350045005000

Ft.-lbs.477261366817

Speed Torque

48”25 - 45 GPM5000 PSI400 PSI23.72:1

10077242

HOSE KITS ARE NOT AVAILABLE FOR THE HP MODELS. DEALER/CUSTOMER IS RESPONSIBLE FOR PROPER HOSES AND COUPLERS.

HIGH-PRESSURE DRIVE UNITS (UP TO 5000 PSI) LISTED BELOW NO DRAIN LINE REQUIRED

NO DRAIN LINE REQUIRED

of 13Form No. 3410 20 May 2016


SKID-STEER QUICK ATTACH

QUICK ATTACH MOUNTING KITS

Mounting Kit (includes knuckle and cradle) attaches the drive unit to skid-steers with standard 2-pin system and SAE quick couplers.

PN WT. PRICE10499 129 $395.00

*10499CSE 129 $420.00

PN MAKES & MODELS WT. PRICE

10172 Cat 420D & 420E (pin grabber)

75 $668.00

10173 JCB 208S, 803, & 8018 40 $555.0010174 JD 790ELC 172 $1,036.0010175 JD 135C RTS 82 $639.0020200 JD 27/35D Mini-Ex

(wedge)61 $416.00

20201 JD 50D Mini-Ex (wedge) 80 $416.0020042 KOMATSU PC50MR-2 50 $416.0020210 YANMAR VIO40/45/50/55 50 $562.0010176 YANMAR VIO20 (quick

coupler)45 $552.00

10177 YANMAR VIO27/35(quick coupler)

50 $562.00

*20007 KUBOTA KX161-3 & U45 75 $416.00*20008 KUBOTA C39/45, KX040-

3/71-3/91-3/121-3, & U3575 $416.00

*20026 KUBOTA KX057 & U55 75 $416.00*20037 KUBOTA U25 75 $416.00

*20075 KUBOTA KX141-3 & U15 75 $416.0020202 BOBCAT X-Change 55 $465.0020258 TAKEUCHI with TAG

Style Quick Couplers TB035/135/138/175/180/235/240/280/285/290

43 $740.00

SMALL BACKHOE & MINI-EXCAVATOR

PN BUCKET PIN DIA. WT. PRICE

10201 25 mm 42 $257.0010201 1 inch 42 $257.00 10202 30 mm 42 $257.0010203 1-1/4 inch 42 $257.0010204 35 mm 42 $257.0010204 1-3/8 inch 42 $257.0010205 1-1/2 inch 42 $257.0010206 40 mm 42 $257.0010298 1-5/8 inch 42 $257.0010207 1-3/4 inch 46 $257.0010208 45 mm 46 $257.00 10209 50 mm 46 $257.0010210 2 inch 46 $257.00

Less dipperstick pin. For dipperstick widths from 3-1/2” to 8”. Bucket pin diameters listed below.

TLB (BACKHOE) & EXCAVATOR

PN BUCKET PIN DIA. WT. PRICE

10296 1-5/8 inch 49 $388.0010231 1-3/4 inch 49 $388.0010481 45 mm 51 $388.0010232 50 mm 51 $388.0010233 55 mm 48 $388.00

Welded mount w/ fixed width

50 $490.00

Less dipperstick pin. For dipperstick widths up to 13”.

CALL FOR PRICE ON CUSTOM MOUNTS

* USA models only.

UNIVERSAL MOUNTING KITMounting Kit (includes plate, knuckle, and cradle) requires fabrication and welding for installation to machine. Weldable dimensions are 10” wide and 16” long. Hardware included.

* Fits Case Models 1835B, 1835C, and 1840

PN WT. PRICE21354 60 $290.00

If you do not see your make or model listed, contact Danuser.

of 13Form No. 3410 20 May 2016


DIA. PRICE WT. 2” HEX PN

2-9/16” RD PN

2” RD PN

4” $299.00 58 20600 20601 206026” $378.00 86 20603 20604 206059” $577.00 122 20606 20607 20608

4’ Length

WOBBLE AUGERS

PN DESCRIPTION PRICE10331 Dirt $28.0010332 Hardfaced $61.0010335 Carbide $148.00

POINTS

PN DESCRIPTION WT. PRICE20656 Skid-Steer Quick Attach Plate Offset

w/ hardware74 $345.00

20657 Euro/Global Offset w/ hardware 88 $370.0020660 John Deere 200-500 Offset w/ hardware 185 $595.00

OFFSET FRONT-END LOADER QUICK ATTACHMounting Kit (includes knuckle and cradle) attaches the drive unit to front-end loader quick attach systems. Choose the correct quick attach below.

BOLT-ON BUCKET

PN WT. PRICE10248 40 $260.00

• Spiral & Checkered Hardfacing

• Hardened Fishtail Point

To be used with Danuser PRO and EP units.

Danuser’s Dirtless Digging Solution• Pushes through

Dirt Sand Clay Asphalt Compacted Rock Embedded Rock

• No loose dirt in the bottom of the hole

• No excess dirt to fall back into the hole

• No dirt to remove around the top of the hole

• Compacted hole ready for concrete

• Suggested mounting to skid-steers, front-end loaders, backhoes, excavators, mini-excavators, telescopic handlers, articulated loaders, and integrated tool carriers

• Requires down force for correct operation

• Not for 3-point hitch mounted diggers

See patent at danuser.com/patents

NOTE: The 9” Wobble Auger should be used on a machine with an Operating Load or Rated Operating Capacity of 2250 lbs. or greater, utilizing an auger drive with 2000 ft.-lbs. of torque or greater

Mounting Kit (includes knuckle) attaches the drive unit to a flat vertical surface. Kit does not include bucket mounting hardware.

PN 20656 PN 20657 PN 20660

of 13Form No. 3410 20 May 2016


FABRICATED AUGERSLight to Moderate Ground Conditions

• Fabricated Boring Head • Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting

DIA. PRICE NO. OF TEETH WT. 2” HEX

PN2-9/16” RD PN

2” RD PN

4” $216.00 0 42 10600-3 10601-3 10602-36” $227.00 2 42 10603-3 10604-3 10605-38” $319.00 2 57 10606-3 10607-3 10608-39” $330.00 3 62 10609-3 10610-3 10611-3

10” $350.00 3 69 10612-3 10613-3 10614-312” $366.00 4 78 10615-3 10616-3 10617-315” $484.00 5 87 10618-3 10619-3 10620-316” $515.00 5 93 10621-3 10622-3 10623-318” $541.00 6 106 10624-3 10625-3 10626-320” $628.00 6 134 10627-3 10628-3 10629-324” $742.00 8 153 10630-3 10631-3 10632-330” $948.00 9 208 10633-3 10634-3 10635-336” $1,184.00 11 275 10636-3 10637-3 10638-3


PN2-9/16” RD PN

2” RD PN

4” $221.00 0 42 10600 10601 106026” $236.00 2 46 10603 10604 106058” $340.00 2 78 10606 10607 106089” $352.00 3 85 10609 10610 10611

10” $389.00 3 98 10612 10613 1061412” $402.00 4 115 10615 10616 1061715” $556.00 5 135 10618 10619 1062016” $575.00 5 146 10621 10622 1062318” $649.00 6 170 10624 10625 1062620” $803.00 6 182 10627 10628 1062924” $834.00 8 211 10630 10631 1063230” $1,069.00 9 272 10633 10634 1063536” $1,359.00 11 365 10636 10637 10638

3’ Length Augers

4’ Length Augers- STANDARD

of 13Form No. 3410 20 May 2016



PN2-9/16” RD PN

2” RD PN

4” $268.00 0 51 10600-5 10601-5 10602-56” $319.00 2 51 10603-5 10604-5 10605-58” $427.00 2 101 10606-5 10607-5 10608-59” $433.00 3 111 10609-5 10610-5 10611-5

10” $494.00 3 126 10612-5 10613-5 10614-512” $500.00 4 145 10615-5 10616-5 10617-515” $680.00 5 164 10618-5 10619-5 10620-516” $778.00 5 177 10621-5 10622-5 10623-518” $850.00 6 207 10624-5 10625-5 10626-520” $937.00 6 254 10627-5 10628-5 10629-524” $1,004.00 8 268 10630-5 10631-5 10632-530” $1,519.00 9 445 10633-5 10634-5 10635-536” $1,663.00 11 501 10636-5 10637-5 10638-5


PN2-9/16” RD PN

2” RD PN

4” $299.00 0 60 10600-6 10601-6 10602-66” $412.00 2 60 10603-6 10604-6 10605-68” $500.00 2 128 10606-6 10607-6 10608-69” $515.00 3 141 10609-6 10610-6 10611-6

10” $577.00 3 160 10612-6 10613-6 10614-612” $628.00 4 186 10615-6 10616-6 10617-615” $829.00 5 193 10618-6 10619-6 10620-616” $942.00 5 208 10621-6 10622-6 10623-618” $1,020.00 6 244 10624-6 10625-6 10626-620” $1,169.00 6 296 10627-6 10628-6 10629-624” $1,354.00 8 325 10630-6 10631-6 10632-630” $1,911.00 9 527 10633-6 10634-6 10635-636” $2,158.00 11 615 10636-6 10637-6 10638-6

6’ Length Augers

5’ Length Augers

FABRICATED AUGERSLight to Moderate Ground Conditions

• Fabricated Boring Head • Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting

of 13Form No. 3410 20 May 2016



PN2-9/16” RD PN

2” RD PN

6” $358.00 2 48 10657 10658 106598” $514.00 4 83 10660 10661 106629” $556.00 4 89 10663 10664 10665

10” $575.00 4 102 10666 10667 1066812” $593.00 4 117 10669 10670 1067115” $747.00 6 139 10672 10673 1067416” $801.00 6 148 10675 10676 1067718” $880.00 6 168 10678 10679 1068020” $1,226.00 6 231 10681 10682 1068324” $1,226.00 8 210 10684 10685 1068630” $1,614.00 10 280 10687 10688 1068936” $1,832.00 12 376 10690 10691 1069242” $2,628.00 16 460 10693 10694 1069548” $3,063.00 18 550 10696 10697 10698


PN2-9/16” RD PN

2” RD PN

6” $345.00 2 40 10657-3 10658-3 10659-38” $469.00 4 67 10660-3 10661-3 10662-39” $500.00 4 70 10663-3 10664-3 10665-3

10” $505.00 4 74 10666-3 10667-3 10668-312” $530.00 4 81 10669-3 10670-3 10671-315” $670.00 6 90 10672-3 10673-3 10674-316” $706.00 6 96 10675-3 10676-3 10677-318” $793.00 6 108 10678-3 10679-3 10680-320” $1,066.00 6 122 10681-3 10682-3 10683-324” $1,080.00 8 154 10684-3 10685-3 10686-330” $1,411.00 10 209 10687-3 10688-3 10689-336” $1,495.00 12 276 10690-3 10691-3 10692-342” $2,410.00 16 416 10693-3 10694-3 10695-348” $2,775.00 18 306 10696-3 10697-3 10698-3

3’ Length Augers

4’ Length Augers- STANDARD

• Cast Steel Boring Head • Hardened Drive-in Teeth - Std. Incl. Gage Teeth in Outside Positions Chisel Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting

CAST HEAD AUGERSDifficult Ground Conditions

of 13Form No. 3410 20 May 2016



PN2-9/16” RD PN

2” RD PN

6” $448.00 2 62 10657-5 10658-5 10659-58” $577.00 4 121 10660-5 10661-5 10662-59” $608.00 4 125 10663-5 10664-5 10665-5

10” $690.00 4 143 10666-5 10667-5 10668-512” $706.00 4 158 10669-5 10670-5 10671-515” $814.00 6 167 10672-5 10673-5 10674-516” $834.00 6 180 10675-5 10676-5 10677-518” $927.00 6 209 10678-5 10679-5 10680-520” $1,272.00 6 241 10681-5 10682-5 10683-524” $1,365.00 8 269 10684-5 10685-5 10686-530” $1,772.00 10 374 10687-5 10688-5 10689-536” $1,915.00 12 502 10690-5 10691-5 10692-542” $3,185.00 16 611 10693-5 10694-5 10695-548” $3,910.00 18 765 10696-5 10697-5 10698-5


PN2-9/16” RD PN

2” RD PN

6” $489.00 2 70 10657-6 10658-6 10659-68” $644.00 4 138 10660-6 10661-6 10662-69” $675.00 4 140 10663-6 10664-6 10665-6

10” $721.00 4 146 10666-6 10667-6 10668-612” $736.00 4 189 10669-6 10670-6 10671-615” $896.00 6 196 10672-6 10673-6 10674-616” $1,056.00 6 212 10675-6 10676-6 10677-618” $1,071.00 6 246 10678-6 10679-6 10680-620” $1,416.00 6 284 10681-6 10682-6 10683-624” $1,530.00 8 327 10684-6 10685-6 10686-630” $2,081.00 10 529 10687-6 10688-6 10689-636” $2,235.00 12 616 10690-6 10691-6 10692-642” $4,030.00 16 791 10693-6 10694-6 10695-648” $5,385.00 18 994 10696-6 10697-6 10698-6

6’ Length Augers

5’ Length Augers

• Cast Steel Boring Head • Hardened Drive-in Teeth - Std. Incl. Gage Teeth in Outside Positions Chisel Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting

CAST HEAD AUGERSDifficult Ground Conditions

of 13Form No. 3410 20 May 2016



PN2-9/16” RD PN

2” RD PN

4.5” $810.00 4 73 10700 10701 107026” $1,212.00 6 66 10703 10704 107057” $1,249.00 8 80 10706 10707 107088” $1,372.00 8 94 10709 10710 107119” $1,392.00 8 103 10712 10713 10714

10” $1,429.00 10 113 10715 10716 1071712” $1,566.00 12 135 10718 10719 1072015” $1,800.00 15 171 10740 10741 1074218” $1,973.00 18 208 10727 10728 1072924” $2,351.00 22 291 10730 10731 1073230” $2,599.00 24 340 10733 10734 1073536” $2,945.00 30 395 10736 10737 10738

Bullet Rock Pilot PN 10758 List Price: $370.00

Bullet Rock ToothPN 10759List Price: $14.50

4’ Length Augers

BULLET ROCK AUGERSRock, Concrete, Asphalt, and Frozen Ground

BULLET ROCKAUGER TOOLS

PN DESCRIPTION PRICE10764 Bullet Tooth Puller $70.0010765 Bullet Tooth Hammer $43.0010766 Bullet Tooth Hammer & Puller $107.00


PN2-9/16” RD PN

2” RD PN

18”-9” $607.00 7 130 10639 10640 1064124”-12” $804.00 10 186 10642 10643 1064430”-15” $1,001.00 11 228 10645 10646 1064736”-18” $1,203.00 13 304 10648 10649 10650

DIA. PRICE WT. 2” HEX PN

2-9/16” RD PN

2” RD PN

2” $335.00 30 10739 10743 10744

4’ Length Augers

3’ Length Augers

TREE AUGERS

2” ROCK DRILL

Tree and Shrub Planting

Pilot Holes

• Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting

• Fabricated Boring Head • Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions

• For pilot holes or setting posts up to 2” O.D. in solid rock

of 13Form No. 3410 20 May 2016


Dirt HardfacedCarbide

AUGER POINTS AND TEETH

VARIABLE LENGTH EXTENSIONS FIXED LENGTH EXTENSIONS

LENGTH PRICE WT. PN24” $211.00 32 1090048” $290.00 56 1090172” $378.00 84 10902

LENGTH PRICE WT. PN12” $152.00 20 1091024” $185.00 32 1091148” $260.00 56 1091272” $341.00 84 10913

Variable length auger extensions store inside the column of 10” diameter or larger augers. Extension increments are every 6” on 12” - 24” auger extensions and every 12” on 48” - 72” auger extensions.

Do not use with HP models.

Fixed length auger extensions extend the auger’s digging depth by the length of the extension.

2” Hex 2” Hex


2-9/16” Round


2” Round


2-9/16” Round


2” Round

Dirt = DHardfaced = HFCarbide = C

D HF CD HF C D HF CD HF

Fishtail PointPN 10331 $28.00PN 10332 $61.00PN 10335 $148.00

4” Auger PointPN 10333 $52.00PN 10334 $90.00PN 10336 $167.00

Gage ToothPN 10340 $3.75PN 10341 $7.95

Wisdom ToothPN 10337 $3.75PN 10338 $7.95PN 10339 $21.75

Chisel ToothPN 10342 $3.75PN 10343 $8.75PN 10344 $16.25

Price quote for: Aftermarket Tractor/Skidsteer …. #416-1216 MINNESOTA PRICING PAGES (Typed...

Documents

Transcript of Price quote for: Aftermarket Tractor/Skidsteer …. #416-1216 MINNESOTA PRICING PAGES (Typed...