loader Attachments Skidsteer Attachments Snow Blades ... · loader attachments skidsteer...

1-800-698-5510www.martatch.com

LOADER ATTACHMENTS

SKIDSTEER ATTACHMENTS

SNOW BLADES

CUSTOM MADE ATTACHMENTS TO fIT ANy LOADER

OR SKID STEER

PRODUCT INDEXATTACHMENTS Page

Buckets 2-3

Bale Spears 4

Manure Forks 5

Stone Forks 5

Grapples 6-7

Pallet Forks 8-9

Logging Equipment 10-11

Lift Boom 11

Rotary Cutter 11 Gardening 12

Industrial 13

SNOWBLADES

Snowblades 14-18

1-800-698-5510 1

CUsTOm maDE aTTaChmENTs TO fIT aNy lOaDER OR

skID sTEER.

FEATURES• ¼” material used for body• hardened side cutting edge for longer wear life• ¾” x 6” hardened cutting edge• trailer hitch for front towing available• will custom fabricate to any size or specifications• skidsteer bucket shown

skIDsTEER / lOaDER BUCkET

MARTATCH buckets, and all other attachments, are built with the end user in mind. With our roots as farmers, we know the abuse, and wear and tear, that attachments need to go through to get the job done. Each attachment is reinforced and gussetted to make it strong and durable for years after purchase.Attachments are stocked for fast turn arounds but custom pieces are built constantly as well.

Give us a call at 1-800-698-5510 for your needs today.

BUCKETS

1-800-698-5510www.martatch.com2

PRODUCT

FEATURES• Increases height of dump• piles manure higher in your storage

hIgh DUmP BUCkET

skIDsTEER / lOaDER BUCkETs

FEATURES• ¼” material used for body• inside gussets for more strength• hardened side cutting edge for

longer wear life• ¾” x 6” hardened cutting edge• trailer hitch for front towing available• will custom fabricate to any size or specifications• (loader bucket shown)

lOaDER, hEavy DUTy, hIgh vOlUmE, BUCkET

BUCKETS

1-800-698-5510 3

GUIDE

lOaDER BUCkET wITh TOP gUaRD

FEATURES• ¼” material used for body• inside gussets for more strength• hardened side cutting edge for

longer wear life• ¾” x 6” hardened cutting edge• top guard for bigger loads• trailer hitch for front towing available• will custom fabricate to any size or specifications

FEATURES• extreme duty teeth • hardened side wear plates• pointed side for better penetration

hEavy DUTy TOOTh BUCkET

FEATURES• bucket floors are

constructed with AR400 Steel• extra heavy duty construction for

high capacity work loads• OPTIONAL: grill to prevent overflow

TElEhaNDlER & whEEl lOaDER BUCkET

Standard

High Volume

Hitch

Chain Hookis inside bucket to

prevent chain snap-ping at operator

SkidsteerBucketSteps

Ice Scraper AttachmentThe ice scraper easily

attaches and detaches with a single hitch pin

FEATURES• standard 3-point hitch mounts • 46” wide frames (30” tine spacing)• available with any amount of tines to

suit your needs• 32”, 39”, and 49” spear lengths

COmPaCT UTIlITy BalE sPEaR

3-POINT hITCh BalE sPEaR

BALE SPEARS

FEATURES• top safety frames are removable for higher

stacking capabilites under truss and low buildings• safety frames easily remove without tools• available in 26” and 36” high• see through backplate for better visibility at

truck level• 32”, 39”, and 49” spear lengths

• 46” wide frames (30” tine spacing)• available with any amount of tines to suit

your needs

safETy fRamE BalE sPEaR


PRODUCT

laRgE, hEavy DUTy, BalE sPEaRwith hydraulic Bale release Pusher

FEATURES• safety frames can be easily removed • light duty bale spears • economical pricing • 20-40 hp tractors and skid steers • light weight to maximize the lifting

capacity of the machine

FEATURES• designed to carry 3 or 4 large

square bales• hydraulic pusher to release bales

from tines• top frame can be removed for handling

bales in low buildings• safety support to prevent bale fork from

tipping when not in use. Folds up when not in use.

• 25” tine spacing• 60” W x 54” H main frame dimensions• 60” W x 79” H total frame with extension• hydraulic hoses included• quick couplers sold separately

Safety Stand Vertical ExtensionNo Hydraulic Option

FEATURES• 36” Conus I cranked tines at 8” centers• 31” useable length• from 42” to 108” widths• available in skidsteer and loader profiles• optional: 32” cranked tines with 26” useable length• original kverneland tines

maNURE fORk

FEATURES• an economical choice with 2 tools in one attachment• pallet fork tines easily remove without tools• bale spear tines easily remove without tools• safety frames easily remove without tools

• 48” bale spear tines• 42” and 48” pallet fork tines

• pallet fork tines adjustable for width• standard class II forklift forks

Easy removal of safety frames. No tools needed!

Forks, tines and safety frames are

easily removed without tools.

hEavy DUTy PallET fORk BalE sPEaR COmBO

MANURE / STONE FORKS

1-800-698-5510 5

REgUlaR sTylE sTONE fORkFEATURES• 39” Conus II cranked tines at

4” centers• 32” useable length• available from 54” to 108”

widths• see through back for better

visibility• original kverneland tines• performs well in loose ground or pasture land

FEATURES• 40” useable length tines at 3” centers• plasma cut for strength and durability• points are reinforced with

cross bar• performs well in loose

ground• available from 54” to 108”

RETaINER sTylE sTONE fORk

GUIDE

FEATURES• handles it all: gravel, logs, garbage, large bales,

manure, brush, cement - the list is endless• 2 hydraulic grabbers work independently to

hold uneven loads• hardened cutting edge

• an all purpose tool, to turn your skidsteer into a multi-purpose machine without changing bits

• available from 48” to 96”

FEATURES• opens to 72” - handy for large

bails • able to grab and move

almost anything you can think of

• extra heavy duty construction with AR400 materal

• Handles the most rugged jobs

BUCkET gRaPPlE

TElEhaNDlER & whEEl lOaDER gRaPPlE

Features• available from 60” to 108”• useful for stones and heavy debris etc.• can be fitted on any front end loader or skidsteer• 39” conus II cranked tines

34” useable length at 4” centers• original kverneland tines

sTONE fORk gRaPPlE

maNURE / UTIlITy gRaPPlEFEATURES• available from 60” to 108”• useful for large bales, manure, debris,

logs, stones etc.• can be fitted on any front end loader

or skidsteer• 36” conus I cranked tines

31” useable length at 8” centersOptiOnal: 32” cranked tines, 26” useable at 8” centers• original kverneland tines

Handling odd materials throws a challenging curve ball every time. With Martatch’s grapple buckets and forks you won’t be stumped when the worst comes along. From inside the cab you can scoop, dig, and grab materials such as large rocks, branches, debris etc. and move them to a different location within minutes. Neglected cleanup jobs will disappear in front of you while you operate a grapple without ever getting out of your seat!

GRAPPLES


PRODUCT

GRAPPLES

PallET fORk gRaPPlEFEATURES• excellent for logging and fence posts• available with adjustable forks 42” to 60” long• 7500 lbs. lifting capacity• hydraulic clamping arms clamp

independently to clamp uneven loads• can be used for lifting skidsOptiOnal: fence unroller will adapt to the side

of the grapple pallet forks

DEBRIs gRaPPlE 37”

DEBRIs gRaPPlE 27”

ROOT RakE gRaPPlE

FEATURES• shown is 37” tines• 69” to 106” widths• 5½” opening between tines• 48” grapple opening• heavy duty ¾” plasma cut material• available in single or double grapple• hoses included• 27” tines grapple available

FEATURES• 27” tines• 69” to 106” widths• 5½” opening between tines• 39” grapple opening• heavy duty ¾” plasma cut material• available in single or double grapple• hoses included

FEATURES• 48” to 80” widths• plasma cut ½” AR400 high

tensile teeth• teeth spaced at 8” centers• available in 30” height,

single grapple• available in 36” height,

double grapple• hoses included

PallET fORk - sINglE aRm gRaPPlE

FEATURES• excellent for laying landscape stones• 7500 lbs. lifting capacity• can be used for lifting skids

1-800-698-5510 7

GUIDE

PALLET FORKS

Pallet forks can make handling your skidded materials much easier and safer. Martatch offers you different options when you need to buy a pallet fork. This way you can get the perfect match to your loader or skidsteer, and the application, for the best cost. Contact us for more information on our pallet forks. Don’t settle for less!

hEavy DUTy PallET fORk / BalE sPEaR COmBO


PRODUCT

FEATURES• an economical choice with 2 tools in one

attachment• pallet fork, bale spear tines and safety

frames easily remove without tools• 48” bale spear tines

• 42” and 48” pallet fork tines• pallet fork tines adjustable for width

• standard class II forklift forks

PALLET FORKS

hEavy DUTy fORk

REgUlaR DUTy PallET fORk

lIghT DUTy PallET fORk

FEATURES• 3700 lbs. capacity - 50” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of

pallet insertion at truck level• anti-slip step• 1¼” thick x 4” wide forks


pallet insertion at truck level• anti-slip step• 1½” thick x 4” wide forks


pallet insertion at truck level• anti-slip step• 1¾” thick x 4” wide forks

FEATURES• standard 3-point hitch mounts • tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks

3-POINT hITCh PallET fORk

Pallet Fork extensionsavailable from 54” to 96”

PallET fORk EXTENsIONs

1-800-698-5510 9

GUIDE

lOg gRaPPlE

FEATURES• 40 - 80 hp and 80 - 100 hp models available• grabs up to 30” logs• chain swivel• clamps on the main frame to keep grapple

from swinging when driving over rough terrrain

• extra heavy duty construction• front jaws to grab hanging trees to back drag• grabs logs on one end for easy

piling (shown above)OptiOnal:• hydraulic winch with 165’ 3/8” cable• 8000 lb. pulling capacity at 25 gal/min

and 2700 lb. pressure• 15 metres/min line speed• free spooling

LOGGING EqUIPMENT

hyDRaUlIC wINCh

FEATURES• will handle any job from logging to

dead stock removal• hydraulic 8000 lbs. free

spooling winch.• 165’ by 3/8” logging cable at 15

metres/min line speed• 25 gal/min/2700 lbs. hydraulic

pressure• self anchoring plate• brush removal blade


PRODUCT

maRTaTCh PRODUCTs aRE BUIlT TO lasT!

LOGGING EqUIPMENT

ROTaRy CUTTER

lIfT BOOm

FEATURES• adjustable boom length• pintle hook on end• adjustable from 48” to 78”• extended capacity 1500 lbs.

1-800-698-5510 11

FEATURES• available in 60”, 72” and 84” for 30 to 100 hp• high flow not needed• lateral float & side shift• adjustable side slides• hardened cutting blades• hydraulic motor 30 hp @ 20 gal/min with

40 hp gearbox• can be fitted on any front end loader

or skidsteer• easily adjusts without tools for

cutting along ditches, fences etc.• safety chain guardOptiOnal: available with

front caster

GUIDE

flaIl mOwER

• available in 60”- 96” widths • high flow not needed • vertical float • hydraulic motor 30 hp - approx. 17–25 gallons / minute • adjustable side sliders

lOaDER mOUNT sPRayER

FEATURES• Front mount or 3 pt hitch• 10’ fold away booms• Hand gun sprayer• 15 - 60 gallon tanks available• Fold away booms up to

30’ available

fERTIlIzER sPREaDER

hyDRaUlIC aRm ROTaRy CUTTER

ROTOTIllER

FEATURES• spreads fertilizer, salt, sand and seed• front mount or 3 pt hitch mount• hydraulic or PTO driven• available from 100 L to 500 L capacity

FEATURES• designed for mowing on uneven terrain along roadsides and laneways, etc.• available from 54” - 66” wide• front castor is standard to ensure even travel on uneven terrain

FEATURES• front mount or 3 pt hitch• hydraulic or PTO driven• 40” to 90” wide available

LANDSCAPING


PRODUCT

TRaIlER hITCh aDaPTER

ROTaTINg hyDRaUlIC BROOm

hyDRaUlIC aNglE BROOmFEATURES• excellent for snow cleanup,

sweeping feed alley ways, outside yards

• does an excellent job without creating dust

• hydraulic adjustable angle

FEATURES• trailer hitch adapter for front end skid

steer or loader• move ball hitch trailers easily with your

front end loader or skid steer• 4 way variable size ball or hook hitch

FEATURES• Angles both ways (manually

with pin)• Sweeps forward or reverse

into bucket• Dump swept-up debris by

tripping bucket manually• After dumping, bucket will

latch into place when sitting on floor

• Uses hydraulic motor to spin broom

3 PT hITCh aDaPTER

FEATURES• Hookup to any 3 pt hitch equipment

with skidsteer or tractor

LANDSCAPING

1-800-698-5510 13

GUIDE

Snow removal with large tractors and blades is a growing market due to large parking lots needing to be cleared with minimal delay to businesses. Increase your efficiency and control with a Martatch hydraulic end wing blade, or one of our heavy duty snow pushers. Whatever the application, Martatch can suit you up with the best of both worlds.

FEATURES:• spring trip cutting edge • lateral float• cross-over relief valve protection• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear life

AVAILABLE IN:• 24” high - 60” - 96” wide - 30-50 hp• 30” high - 72” - 108” wide - 30-80 hp• 34” high - 108” - 168” wide c/w double cylinder - 60-120 hp• 42” high - 144” - 192” wide c/w double cylinder - 90-200 hp extra heavy duty construction

hEavy DUTy hyDRaUlIC aNglE sNOw BlaDEs

SNOw BLADES


PRODUCT

FEATURES:• spring trip mouldboard • lateral float• cross-over relief valve protection• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer

wear life

AVAILABLE IN:• 20” high mouldboard• from 54” to 72” widths• made to fit any loader• for 20 - 35 hp. range• available with undercarriage mount

The true name of Martatch’s compact tractor snowblades is - convenience. Now you don’t have to spend your whole morning shoveling your driveway only to have it snow again later that day. With a Martatch snow blade on the front of your compact, you can have your’s, and the neighbour’s driveway clean before your coffee is done. Look no further!

SNOw BLADES

1-800-698-5510 15

PURE CONVENIENCE!

hyDRaUlIC aNglE COmPaCT sNOw BlaDEs

GUIDE

Martatch Snow-pushers are strictly designed for the contractor / farmer that needs the best solution for a bare-bones price. Snow-pushers are built with loader attachments specifically to your request or with a bucket attachment. You can convert your loader tractor or wheel loader to a snow removal machine in minutes for a low cost. Most buckets will simply slide into the sleeves at the back of the snow pushers while chains securely hold the pusher onto your bucket. This is definitely your best bet for a simple conversion where versatility is important.

FEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral float

AVAILABLE IN:• 30” high - 96” wide - 30-50 hp• 34” high - 120” wide - 40-90 hp• 38” high - 168” wide - 80-120 hp• made to fit any loader or bucket

REgUlaR DUTy sNOw PUshERs

SNOw PUShERS


PRODUCT

FEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral float

AVAILABLE IN:• 42” high - 144” - 192” wide - 110-150 hp• 48” high - 144” - 192” wide - 150-200 hp• extra heavy duty construction designed for 150-200 hp wheel loaders• made to fit any loader or bucket

CONvERT yOUR lOaDER TRaCTOR OR whEEl lOaDER

TO a sNOw REmOval maChINE IN mINUTEs

SNOw PUShERS

hEavy DUTy sNOw PUshERs

1-800-698-5510 17

GUIDE

SNOw BLADES

sUPER hEavy DUTy sNOw-PUshERs


The Martatch SNOW BRUTE snow pusher is a beefed up version of the Heavy Duty Snow Pusher for 150 - 200 HP machines. Built with heavier material and more strength, this is one serious contender in the snow pusher market. One seriously heavy duty snow pusher for serious snow pushers.

FEATURES:• AR 400 material - replaceable

skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral float

AVAILABLE IN:• 42” high - 144” - 192” wide - 110-150 hp• 48” high - 144” - 192” wide - 150-200 hp• extra heavy duty construction designed for 150-200 hp wheel loaders• made to fit any loader or bucket

PRODUCT

SNOw BLADES

FEATURES:• blade wings hydraulically

extend from 0-180 degrees• spring trip cutting edge • lateral float• cross-over relief valve protection on all 4 cylinders• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear life• round pipe bullnose edge on wings to

protect tiresAVAILABLE IN:• 30” high - 72” - 105” wide - 55-85 hp• 34” high - 96” - 168” wide - 80-155 hp• wings are 30” deep• extended wings add a maximum of 60” to

main mouldboard width

hyDRaUlIC END wINg sNOw BlaDEs

1-800-698-5510 19

Martatch Hydraulic End Wing Snowblades give you a significant edge over any other conventional blade. From the cab you can windrow the snow, then with the touch of a button you can setup your blade as a box blade to push it to the far end of the lot. Even tight corners aren’t an issue with this capable blade. Just swing the wings back and back-dragging becomes easy and efficient. When hard-to-get-at spots are all over your lot, don’t settle for anything less.

whEN haRD-TO-gET-aT sPOTs aRE all OvER

yOUR lOT, DON’T sETTlE fOR aNyThINg lEss

GUIDE

1-800-698-551020

TAKE A BITE OUT OF OLD MAN wINTER!

NEW STYLE SNOW PUSHER WITH BACK DRAGAVAILABLE IN:30” high, 120” wide (30-50 hp) 34” high, 144” wide (40-90 hp)38” high, 168” wide (70-120 hp)

FEATURES:• Available with Steel or Rubber cutting edge for back drag• A must have for putlling snow away from doors, buildings or loading docks• Spring trip cutting edge • AR400 Adjustable shoes

1-800-698-5510

Custom made attaChments to fit any loader or

skid steer.

Buckets - Page 3 Angle Broom - Page 13

Bale Spears - Page 4

Hydraulic Winch - Page 11

Stone Forks - Page 6

Snow Blade - Page 14

Snow Pusher - Page 16Palette Forks - Page 9

4350 Hessen Strasse, RR #3,Wellesley, ON N0B 2T0 Canada

Phone: 519-699-4668 Fax: 519-699-54161-800-698-5510

Email: [email protected] Website: www.martatch.com

LOADER ATTACHMENTS

SKIDSTEER ATTACHMENTS

SNOW BLADES

Available At:

loader Attachments Skidsteer Attachments Snow Blades ... · loader attachments skidsteer...

Documents

Transcript of loader Attachments Skidsteer Attachments Snow Blades ... · loader attachments skidsteer...