Presentation of GeoNMR Technology
-
Upload
vlad-kholodov -
Category
Technology
-
view
652 -
download
0
description
Transcript of Presentation of GeoNMR Technology
Genesis CorporationGenesis Corporation
Geophysical technologyGeophysical technologyfor remote search and prospecting for remote search and prospecting
of mineral depositsof mineral deposits
GeoNMRGeoNMR
GeoNMR2
Current geophysical methods for search and prospecting of mineral deposits, such as seismography, electrical survey, magnetic survey, geochemical prospecting and other geological methods, even being used together, cannot give more than 60-65% of probability of disclosure of mineral deposits from a first drilling. It occurs because all this methods is not the methods of “direct” search. Tendency of increasing of difficulty of search and prospecting in connection with searching and prospecting in more and more difficult geological conditions (all simple-to-find mineral deposits was already opened) dictate to get new “direct” search methods.
Do we need new methods of minerals searchDo we need new methods of minerals search??
GeoNMR3
Science don’t stays at the same place. New kinds of interactions is opened. It allows to use in practice this new wave effects. It is necessary to invent new methods of “direct” search, which will allow to give the answer about presence or absence required substance underground or underwater. This method must have effectiveness, which will be near 100%, and it must be more cheaper and more faster in time, than complex of traditional methods.
Thus, we see new demands, and we can move forward to the next page.
Do we need new methods of minerals searchDo we need new methods of minerals search
GeoNMR4
History of creating of our technology starts from
one bold idea:
ALL SUBSTANCES HAVE IT OWN WAVE
FREQUENCY, WHICH CAN USE FOR THEIR
IDENTIFICATION
About “GeoNMR” Technology About “GeoNMR” Technology
GeoNMR5
and today we can recognize most of natural substances using it wave frequency
About “GeoNMR” Technology About “GeoNMR” Technology
GeoNMR6
BUT IT IS NOT ALL NEWS!
Analog photo can give the wave information
about substance as good as the real substance.
Signal intensity from the substance depends only from the volume of the substance
and does not depend from the presence
of obstacles on the signals path(or depth, kinds of formations and other factors)
About “GeoNMR” Technology About “GeoNMR” Technology
GeoNMR7
Using of the “GeoNMR”Using of the “GeoNMR”
Using of our technology, we can find
Mineral deposits under ground and under water
Our experience says, that accuracy of search
of deposits with using of “GeoNMR” exceeds 90 %
We divide our work on two part:
Diagnostic part – investigation of analog space pictures (satellite
analog photo from the archive)
Prospecting part – expedition directly to site
GeoNMR8
2 month
Measurement of exact parameters of deposits, obtainment of 3D shape of real deposits, choice of optimum points for effective drilling, calculation of extractable reserves
Prospecting of deposits
2 month Revelation of deposits on the inspected territory, drawing of their ground contours and occurrence depths
Remotedetermination of deposits
Investigations of local area (points of future well drilling, old wells, unfinished wells etc.)
Presence or absence of mineral deposits in a territory
Description
1 month Investigations of points
1 month Fastdiagnostic of territory
DurationService
Services by means of “GeoNMR” technologyServices by means of “GeoNMR” technology
GeoNMR9
How does “GeoNMR” technology work?How does “GeoNMR” technology work?
The first part of our work uses analog space picture of specified
territory, which will be activated inside of research nuclear reactor.
It is necessary for «revelation» of hide information about required
substance.
GeoNMR10
How does “GeoNMR” technology work?How does “GeoNMR” technology work?
After treatment inside reactor occurs transferring of hidden images by
means of special wave scanner and mathematic calculation of results.
Duration of first part of work is near 2 months
GeoNMR11
How does “GeoNMR” technology work?How does “GeoNMR” technology work?
Second part of work is conducted directly on site by means of group of
specialists with using of mobile equipment. The tasks of second part of work –
more accurate definition of borders and depths of deposit, choosing of optimal
point of drilling
Duration of second part of work is near 2 months
GeoNMR12
Results of workResults of work
After finishing of work Customer receives detailed report, inside of
which reflected next information:
- map of investigated area with contours of found deposits
- detailed information about deposits
- square of deposits
- expected extractable volume of minerals (oil, gas or water)
- depths of bedding
- optimal points for productive drillings
- thickness of productive horizons
- 3D model of deposits with cuts
GeoNMR13
THANKS FOR YOUR TIME!
WWW.GeoNMR.com
Genesis Genesis CorporationCorporation