Presentation
7
How I made a WW1 Airplane By Shane
Transcript of Presentation
How I made a WW1 Airplane
By Shane
Step 1
Get a sheet of 1mm plastic.
Cut out wings and the body.
Step 2
Bend the body with a bending machine.
Step 3
Drill holes in the wings and in the body.Then screw it together.
Step 4
Then I got a propeller with some double-sided sticky tape on top and stuck it to the plastic.
Slide 5
Then I got a switch, and a blue,black and red wire.
My dad then used a soldering iron to connect the wires.
And put in two batteries.
The End Result