Presentation # 3 – "Drilling tool Bogomolov"
11
Forming wells with square cross section «Drilling tool Bogomolov»
Transcript of Presentation # 3 – "Drilling tool Bogomolov"
Forming wells with square cross section
«Drilling tool Bogomolov»
Requirements for prospective drilling tool
Providing the possibility of forming wells with a square cross-section.
Unitized construction, allowing operation on production drilling machines.
Modeling of the process of shaping the edges of the rectangular wells
Designed shape of the cutter for receiving the bore of square cross section
The first prototype drilling tool
The first drilling results
A possible embodiment of the serial cutting-cone drilling tool
Possible version serial tricone drilling tools
The results of research
The methods of determining the geometric parameters of the milling cutter, is able to drill wells with a square cross-section.
Made layout a cone drilling tool for drilling holes with a square cross-section.
Experimental drilling. Identifies possible options serial
execution of «Drilling tools Bogomolov».
Thank you for your cooperation and understanding
Igor GolovinPhone: +7-921-435-13-44
E-mail: [email protected]«Drilling tool Bogomolov»
Archive of presentations
The efficiency of the blast hole with a square cross-section
The economic effect from the use of a blast hole with a non-circular cross-section
