Presentación stonetino general rev 1
description
Transcript of Presentación stonetino general rev 1
Ventilated Cladding Systems
CLIENT:
F.A.O.:
PROJECT:
VENTILATED FAÇADE 0 1
BUILDING CONCEPT: RAIN SCREEN PRINCIPLE
- THERMAL PROTECTION / ENERGY SAVING
- SUN PROTECTION
- NOIS PROTECTION
- DAMPNESS REMOVAL BY CAPILARITY
- CONDENSATION REMOVAL
- CREATIVITY AND AESTHETICS
- EASSINESS, CLANING AND FAST INSTALLATION
Insulation Exterior or
inner wall
Air flow at the rear
of the cladding
Air flow at the rear
of the cladding
Interior moist Air
Ventilation Cavity
WIND AND RAIN
Breather
Membrane
0 2
Punctual anchor without regulation Punctual anchor with regulation
Hidden anchor fixing at the back of the stone Hidden anchor Mullion system
VENTILATED FAÇADE
0 3 VENTILATED FAÇADE
0 4 VENTILATED FAÇADE
Imagination
Perfomance
Efficiency
Flatness
Versatility
0 5 VENTILATED CLADDING SYSTEMS
0 6 VENTILATED CLADDING SYSTEMS
CEILING AND FACADE
SYSTEM. TINO
PROPOUSAL.
0 7 VENTILATED CLADDING SYSTEMS
VENTILATED CLADDING SYSTEMS 0 8
0 9 VENTILATED CLADDING SYSTEMS
1 0 VENTILATED CLADDING SYSTEMS
1 2
VENTILATED CLADDING SYSTEMS
1 3
VENTILATED CLADDING SYSTEMS
1 4
VENTILATED CLADDING SYSTEMS
1 5
VENTILATED CLADDING SYSTEMS
1 6
VENTILATED CLADDING SYSTEMS
1 7
VENTILATED CLADDING SYSTEMS
SISTEMA DE FIJACIÓN DEL PANEL POR MEDIO DE
INSERTOS.
1 8
VENTILATED CLADDING SYSTEMS
1 9
VENTILATED CLADDING SYSTEMS
2 0
VENTILATED CLADDING SYSTEMS
•DETALLES DE SISTEMAS DE PIEZAS DE SEGURIDAD.
ESTA PIEZA ELIMINA EL MOVIMIENTO DE LOS PANELES,
CON LO QUE ASEGURA LAS JUNTAS EN 10MM,
DESPLAZÁNDOSE TODO EL SISTEMA COMO UN ÚNICO
CONJUNTO.
2 1
VENTILATED CLADDING SYSTEMS
•DETALLES DE SISTEMAS DE PIEZAS DE SEGURIDAD.
ESTA PIEZA ELIMINA EL MOVIMIENTO DE LOS PANELES
EN FALDOS TECHOS, CON LO QUE ASEGURA LAS
JUNTAS EN 10MM, DESPLAZÁNDOSE TODO EL SISTEMA
COMO UN ÚNICO CONJUNTO.
IGUALMENTE ELIMINA EL RIEGO DE CAIDA DEL PANEL,
AL ESTAR COLOCADO EN UNA POSICIÓN HORIZONTAL.
2 2
VENTILATED CLADDING SYSTEMS
3D MODEL.
3D MODEL.
2 3
VENTILATED CLADDING SYSTEMS
2 4 Nut beam, adjustable
clip.
2 5
2 6
2 7
.
•STONETINO PANEL. (technical data)
CORE
Aluminium alloy 3003 – Foil 50 micras
– Density 40 Kg/Cbm
(Compressive strength) > 2,5
N/Sqmm
.
Aluminum Honeycomb panel 12 mm. Thikness
Front surface made of TINO White Limestone, 5/8 mm
thickness
Back surface made of gross aluminium sheet, not coated,
1 mm thikness.
Core made fron aluminium Honeycomb panel, 10 mm
thickness
Structual dual-component adhesive.
Total weight: 17,8 Kg/Sqm
.
FIRE RESISTANCE
Spanish Standard UNE 13501-1
B-s2,d0
DIN 4102
B1
NF P 92 – 501
M1
BS 476 – PARTE 6
0
BS 476 – PARTE 7
Clase 1
2 8
.
•STONETINO PANEL. (technical data)
ACUSTIC ISOLATION
Absorption coef.
0,05
Absorption ISO 717-1 and 140-3
23 dB
THERMAL ISOLATION
Thermal conductivity of Honeycomb
panel coef: 1,6 W/mK
Termal resistance coef.: 0,007 m2 K/W
Standard temperature range: -40ºC a
+90ºC
HONEYCOMB PANEL MECHANICAL SPECIFICATIONS
Inertia Moment : 14 cm3/m
Stiffness to flection : 83.000 KNcm2/m
Elasticity Module:74.000 N/mm2
Traction Resistance: > 125 N/mm2
Linear expanding coef. ; 2,4 mm with 100ºC gap
temperature
Structual dual-component adhesive.
Total weight: 17,8 Kg/Sqm
.
2 9 Sandwich honeycomb panel, size
2400x1400 mm, total thickness 18
mm (11 mm honeycomb panel
thickness + 7 mm stone thickness),
with TINO White Limestone, sanded
finished and TINO special treatment
to avoid sand-turning phenomena.
3 0 Sandwich honeycomb panel.
STONETINO PANEL, can use any
type of surface finishing stone
element that the customer select,
and length and width measurements
in large maximum dimensions
3000x1500 mm, depending on the
materials selected
3 1 STONETINO PANEL
EXAMPLE.
3 2 STONETINO PANEL
EXAMPLE.
3 3 STONETINO PANEL
EXAMPLE.
3 4 ENSAYOS
ARRANCAMIENTO
INSERTOS PANEL.
3 5
7
ENSAYOS
ARRANCAMIENTO
INSERTOS PANEL.
0
2000
4000
6000
8000
10000
12000
14000
16000
0 1 2 3 4 5 6 7
Carg
a (
N)
Desplazamiento (mm)
Ensayo 1
3 6
7
ENSAYOS
ARRANCAMIENTO
INSERTOS PANEL.
0
2000
4000
6000
8000
10000
12000
14000
16000
0 1 2 3 4 5 6 7
Carg
a (
N)
Desplazamiento (mm)
Ensayo 2
3 7
7
ENSAYOS
ARRANCAMIENTO
INSERTOS PANEL.
0
2000
4000
6000
8000
10000
12000
14000
16000
0 1 2 3 4 5 6 7
Carg
a (
N)
Desplazamiento (mm)
Ensayo 3
3 8 ALUMINUM SYSTEM DESCRIPTION
The ventilated facade system consists of:
1 / Cladding by facing as defined in the project. Coating parts are fixed to the vertical profiles by
stainless clips with concealed fixing.
2 / Ventilated air chamber in which thermal insulation can be placed.
3 / Vertical profiles attached to brackets by means of self-tapping stainless steel screws.
4 / Aluminum separators (brackets) for transmitting weight of the substructure to the original
freestanding structure by means of anchorages.
5 / Anchorages of the separators or the support brackets by means of bolts to be determined by
the installer and the manufacturer according to the technical conditions of the original
supporting structure.
Fixings may be performed to walls when these enclosures are able to receive weights
(perforated or solid brick walls with a resistance greater than or equal to 150Kg/cm2 certified by
the manufacturer or concrete walls HM20 or armed walls HA25).
3 9
4 0
4 1
4 2
4 3 ANCLAJES A
FORJADO DE
HORMIGON.
4 4 ANCLAJES A MURO
LADRILLO.
4 5 TORNILLOS
AUTORROSCANTES.
Paseo de la Castellana, 115
Planta 10 izda.
28046 Madrid - España
Tel.: +34 91 555 41 24
Fax: +34 91 555 50 07
www.eurogramco.com
Ventilated Cladding Systems