Prerequisites Configuration - Infiniasdownloadvi.com/downloads/AccessControl/Plugin...Part 2 – For...
Transcript of Prerequisites Configuration - Infiniasdownloadvi.com/downloads/AccessControl/Plugin...Part 2 – For...
Part 1 – For users with Video Insight IP Server
version 3.0 – or higher use the following instructions
*See Part 2 of document for later versions of Video Insight IP Server and
Prerequisites
1. Video Insight server running 5.5.18.32. Infinias Server running 3.0 or later3. Open ports 18779 and the desired event port needed for Video Insight and
Infinias
Configuration - Infinias
1. Log into the Infinias software via the w
2. Once logged into the Infinias website, left
3. In the configuration section, click on the
Video Insight IP Server version 5.5.18.3 - 6.3.0.12, and
use the following instructions.
of document for later versions of Video Insight IP Server and infinias
Video Insight server running 5.5.18.3-6.3.0.12 Infinias Server running 3.0 or later Open ports 18779 and the desired event port needed for Video Insight and
the Infinias software via the website. The default credentials are admin/admin
ed into the Infinias website, left click on the Configuration link.
In the configuration section, click on the Peripherals tab.
, and infinias
infinias.
Open ports 18779 and the desired event port needed for Video Insight and
efault credentials are admin/admin.
link.
4. Once in the Peripherals tab, click on the
When the Create Peripheral window pops up, enter the following information
Name – Generic Peripheral
Protocol – http://
Host Name – Enter the IP address of the IP Server
Port – Select a desired port to be used as the event port (9001 is used in this example)
Username – n/a (credentials are not needed regardless if security is enabled or not)
Password – n/a (credentials are not neede
Once in the Peripherals tab, click on the Create Peripheral link under Actions.
When the Create Peripheral window pops up, enter the following information
Generic Peripheral
Enter the IP address of the IP Server
Select a desired port to be used as the event port (9001 is used in this example)
n/a (credentials are not needed regardless if security is enabled or not)
(credentials are not needed regardless if security is enabled or not)
link under Actions.
When the Create Peripheral window pops up, enter the following information:
Select a desired port to be used as the event port (9001 is used in this example)
n/a (credentials are not needed regardless if security is enabled or not)
d regardless if security is enabled or not)
5. Click Create to Save.
Configuration – Video Insight Integration
The access control portion will need to be configured on the Video Insight application. Open the
Monitor Station and Administration >
From VI Monitor, enable the Access Control Support checkbox and select Infinias from the Access
Control Type.
1. Enter the following information into the Connection Information Fields
Server – Enter the IP address of the
Port – Port number 18779 is required and cannot be changed.
User – Enter the username of the Infinias software.
Password – Enter the password of user listed above.
Test Connection – Use this button to test the connection once completed
Event Port – This is the port number that was ass
2. Click Test Connection to confirm the integration is working. A dialog box will appear stating: Access
Control System Connection Successful.
Video Insight Integration
The access control portion will need to be configured on the Video Insight application. Open the
Monitor Station and Administration > Servers and Access Configuration.
From VI Monitor, enable the Access Control Support checkbox and select Infinias from the Access
Enter the following information into the Connection Information Fields
Enter the IP address of the Infinias server.
Port number 18779 is required and cannot be changed.
Enter the username of the Infinias software.
Enter the password of user listed above.
Use this button to test the connection once completed.
This is the port number that was assigned in the Peripheral section.
Click Test Connection to confirm the integration is working. A dialog box will appear stating: Access
Control System Connection Successful.
The access control portion will need to be configured on the Video Insight application. Open the
From VI Monitor, enable the Access Control Support checkbox and select Infinias from the Access
igned in the Peripheral section.
Click Test Connection to confirm the integration is working. A dialog box will appear stating: Access
3. Click on “Import Doors” to display the list of doors in the Infinias system.
4. Select the desired doors to add to VI Monitor by selecting a door and clicking the Add
5. The doors will not be imported or configured completely unless a camera is asso
Select a door and click Properties to associate a Camera. Click OK.
Click on “Import Doors” to display the list of doors in the Infinias system.
Select the desired doors to add to VI Monitor by selecting a door and clicking the Add
The doors will not be imported or configured completely unless a camera is associated with a door.
Select a door and click Properties to associate a Camera. Click OK.
Select the desired doors to add to VI Monitor by selecting a door and clicking the Add-> button.
ciated with a door.
The installation is now complete.
Part 2 – For users with Video Insight IP Server version
4.5.3410.0
Prerequisites
Video Insight IP Server version 6
plug-in installer found on www.downloadvi.com
Configuration – Video Insight Integration
First, run the Video Insight Plugin installer and select
make sure to restart VI Monitor/Monitor Station and the IP Service.
The access control portion will need to be configured on the Vide
the VI Monitor and click on Server Setup. Select the correct server and select Access
Configuration. Enable the Access Control Support checkbox and select
Control Type.
Insight IP Server version 6.3.2.12 or higher, with
Infinias Integration Guide
.3.2.12 or higher, with infinias version 4.5.3410
www.downloadvi.com.
Insight Integration
un the Video Insight Plugin installer and select infinias. Once the installer is complete,
make sure to restart VI Monitor/Monitor Station and the IP Service.
The access control portion will need to be configured on the Video Insight application. Open
VI Monitor and click on Server Setup. Select the correct server and select Access
nable the Access Control Support checkbox and select infinias
with infinias version
5.3410.0, use the VIAC
. Once the installer is complete,
o Insight application. Open
VI Monitor and click on Server Setup. Select the correct server and select Access
from the Access
6. Enter the following information into the Connection Information Field:
IP Address - Enter the IP address of the
Port – The default port should be “
User – The default username is “
Password – The default password
Event Port – Leave the event port
7. Click Test Connection to confirm the integration is working. A dialog box will appear
stating: Access Control System Connection Successful
8. Click on “Import Doors” to display the list of doors in the
9. Select the desired doors to add to VI Monitor by selecting a door and clicking the Add
button.
information into the Connection Information Field:
Enter the IP address of the infinias system.
The default port should be “18779”.
“admin”.
The default password is “admin”.
event port as “0”.
to confirm the integration is working. A dialog box will appear
Access Control System Connection Successful.
Click on “Import Doors” to display the list of doors in the infinias system.
e desired doors to add to VI Monitor by selecting a door and clicking the Add
to confirm the integration is working. A dialog box will appear
system.
e desired doors to add to VI Monitor by selecting a door and clicking the Add->
10. The doors will not be imported or configured completely unless a camera is associated
with a door. Select a door and click Properties to associate a Camera. Click
11. The installation is now complete.
The doors will not be imported or configured completely unless a camera is associated
with a door. Select a door and click Properties to associate a Camera. Click OK.
The installation is now complete.
The doors will not be imported or configured completely unless a camera is associated
OK.