Prensa metelográfica TECMET
-
Upload
tecnicas-de-medida-y-metalografia-sa -
Category
Documents
-
view
215 -
download
0
description
Transcript of Prensa metelográfica TECMET
rev.
02-0
7
hitech europe
Technical specifications and equipments are subject to change without any notice or obligation on the part of the manufacturer
Tecnimetal saIgnacio Ellacuria, 10 - 28017 Madrid -Spain
tel +34 91 3562294 - fax +34 91 3555808 E mail: [email protected]
www.tecnimetalsa.es
®
Technical data
Accessories
Consumables
• Corrosion, heat and impact resistant moulded cover.• System control of the cycles
through an electronic thermoregulator,with direct reading on digital display.• Mould temperature, heating time,cooling time are
selectable and preset.• Control of heating from 0 to 200°C..• Direct reading of pressure (0 to 6 bar).• Selector for ram up/ram down.• Non-conductive closure handles.• Possibility to produce moulds from 25 through to 40mm.• Audible time-out alarm.
•1200 W. of power• Dim. 380x450x600 mm• Weight: 40 kg.
Mould assembly 25mm. (code 03-20-A025-A)Mould assembly 30mm. (code 03-20-A030-A) Mould assembly 32mm. (code 03-20-A032-A)Mould assembly 38mm. (code 03-20-A038-A)Mould assembly 40mm. (code 03-20-A040-A)
Mounting press for metallographic samples,
automatic pneumatic,compact, safe, easy to use,
for high volume sample requirements.Thermoregulator wuth display
* Ask for the Consumables Catalogue.
tecmet 2000 supplies a wide range of high-quality metallurgical consumables for the preparation of high-quality samples:
Hot mounting compoundsCold mounting compounds Mounting accessories Abrasive cut off wheelsDiamond bladesAbrasive papersSelf-adhesive diamond discsAbrasive suspensionsPolishing productsPolishing clothsMagnetic systemAccessories for finishing.