PR2 Short Rise Vertical Platform Lift · 2020. 3. 31. · Panova Lifts, Unit 2 Sidings Business...
Transcript of PR2 Short Rise Vertical Platform Lift · 2020. 3. 31. · Panova Lifts, Unit 2 Sidings Business...
PR2 Short Rise Vertical Platform Lift
Reliability Flexibility Choice
Configurations
Options Standard
Through Adjacent
Call Button Panel
The button faceplate can be brushed stainless steel, brass plate, or any other design desired
Two standard sizes, other sizes available on request
Orientation Internal Platform size Through 1400mm long x 900mm wide Adjacent 1400mm long x 1100mm wide
Overall Lift Footprint 1620mm x 1370mm wide 1510mm x 1320mm wide
Glazing
Toughened, laminated glass available in: Clear Frosted Colour Tints Etched
Solid Panels also available
CAD Drawings available upon request
Technical specification
Maximum user load 1400x900 size: 315kg 1400x1100 size: 400kg
Translation speed 0.10m/s
Max rise Up to 3000mm maximum.
Drive system Hydraulic, with soft start / stop
Electrical Connection Single Phase 220V, 50Hz, 13a Terminated on rotary isolator
Electric box No separate cabinet – all controllers mounted within lift
Landing Call Buttons Wall or lift door post mounted. “Hold to run” buttons or key switches for authorised use only
Floor Finish Any floor material – Standard is Polyflor Vinyl. Can be matched to client’s requirements
Colour Finish Brushed Stainless Steel, or any RAL colour
Platform sizes 1400mm long x 900mm wide 1400mm long and 1100mm wide Larger size required for lifts with doors on adjacent sides Other sizes available on request Pit depth: 60mm-120mm depending on underneath protection or ramp available
Safety features Safety edge bump protection Safety floor pan, beneath platform. Emergency Stop button Onboard diagnostics UPS available for protection from power cuts Service Interval warning to user
Regulatory compliance
2006/42/EC Machinery Directive
Panova Lifts, Unit 2 Sidings Business Park, Freightliner Road, Hull, HU3 4XA
01482 480710
All information contained in this brochure was correct at the time of publication, but due to the nature of our continuous improvement policy, we reserve the right to change the specification from time to time without notice