Panova Aluminum

DOORS AND AUTOMATIONSYSTEMS

SUN BREAKERS

CURTAIN WALL SYSTEMS

WINDOW / DOOR SYSTEMS

SECURITY SYSTEMS

CLADDING SYSTEMS

THERMALLY INSULATEDWINDOW / DOOR SYSTEMS

SKYLIGHT

1

table of contents

3

curtain Wall Systems

GE 50 SC CE 50 SG CE 50

IZO CE 50 KE 50 GE 50 ICV

IZO KE 50 YE 50 MN 86

SPS IZO SPS AC 70

MN 85 EFS

The façade, which appears to be the shell of building, fulfills aesthetics and functionality as determined by material, construction technique, architecture and also protects the building from external weather conditions such as wind, rain, snow, hot and cold while it provides adequate amount of intake of light during such protection. Such systems increase thermal insulation to maximum levels according to the type to be chosen and make contribution to energy issue and to the environment by reducing fuel consumption.

As the façade of building makes contribution not only to the structure of building itself but also to the appearance of city, it also bears the identity of city furniture. In this regard, it gives the designers more freedom with its different cap options and semi-capped systems as well as structural silicone systems, sub-system options and its technical and aesthetic distinctions.

All façade systems are tested and certified at KAPEDAM in accordance with international norms.

4

curtain wall systems

GE 50 SC (Special Clamp) Curtain Wall System can be used for wide span by means of different depths of the mullion profiles depte, with full glass appearance and special bonding method.GE 50 SC Curtain wall system has been produced by using special spacer profile and two component structural silicone, which contribute to the building aesthetic with full glass appearance.The special fastening parts make the system unique, and also the bonding process of the insulated glass is not different from the conventional bonding.The fastening parts can be easily fixed by clamping to thechannel of the spacer, and also there is no need to fix the special fastening parts in the sliding channel.The glass modules can be easily and efficiently installatedon site condition by means of this special fastening method.The assembling method of the GE 50 SC curtain wall system is easier and aluminum consumption is less than the standard silicone bonding method with cassette, up to % 30 and 40 The required ventilation of the building can be processed manually or automatically by means of outward opening, top hung concealed vent and parallel opening options.

Invisible details in the whole:• Low thermal transmittance coefficient,• Special polyamides reinforced with % 25 glass fibersfor thermally insulated profiles• Transom and mullion profiles with differentconstruction depths• Anodized and powder coated profiles in all RAL colorsproduced by QUALANOD and QUALICOAT certifiedproduction lines, and also wood effect options• EPDM gaskets for dust, air and water tightness• User friendly diagrams for static and thermal options• Successfully completed performance tests inKAPEDAM (Turkey)

Range of ApplicationBusiness centersOtelsAirportsShopping centersHospitalsPublic buildingsResidences

Types of OpeningPush-outop hung concealed ventAll type of opening for windowsAll type of opening for doors

(Technical Property)

(Construction width)

(Construction depth)

(Air permeability)

(Water tightness)

(Resistance to wind load)

(Thermal transmittance coefficient (Uf))

(Thermal transmittance coefficient (Uw))

(Results) (Reference)

GE 50 SC

(Technical Property) (Results) (Reference)

5


CE 50 SG (Special Glazing) Curtain Wall System can be used for highest span by means of different mullion profiles, with full glass appearance. CE 50 SG Curtain Wall System have been produced by using a new glazing technology, easier and more efficient than the conventional structural silicone bonding method, and this system also increases the building aesthetic with full glass appearance. The main advantages of the CE 50 SG system includes fast and dry bonding of the glass and aluminium frames and subsequently transporting these in a very short time.

Invisible details in the whole:• New glazing technique,• 50 mm face width,• Ventilation option with the outward opening top hungconcealed vent,• Aluminium profiles with 1.6, 2 and 3 mm thickness• Anodized and powder coated profiles in all RAL colorsproduced by QUALANOD and QUALICOAT certifiedproduction lines, and also wood effect options• EPDM gaskets for dust, air and water tightness,• Successfully completed performance tests inKAPEDAM (Turkey)

Range of ApplicationBusiness centersOtelsAirportsShopping centersHospitalsPublic buildingsResidences

Types of OpeningPush-outop hung concealed ventAll type of opening for windowsAll type of opening for doors



(Air permeability)

(Water tightness)


(CE 50 SG Curtain Wall System)

CE 50 SG

6

With structural silicone application, CE 50 curtain wall system with complete glass appearance enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths). It improves the visual richness of building merely with glass appearance.

Invisible details in the whole:• 50 mm body width• Ventilation option with outward opening blind ventapplication• Aluminum profiles with wall thicknesses of 1.6, 2and 3 mm• QUALANOD and QUALICOAT - certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished

(Air permeability)

(Water tihghtness)




7


With structural silicone application, thrermally insulated İZO CE 50 Curtain Curtain Wall system with complete glass appearance enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths). It improves the visual richness of building merely with glass appearance.

Invisible details in the whole:• 50 mm body width• Low thermal transmittance coefficient• Ventilation option with outward opening blind ventapplication• Aluminum profiles with wall thicknesses of 1.6, 2and 3 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• 25% glass fiber reinforced, ÇUHADAROĞLU printed,polyamide (imported) thermal break usage• Performance testing accomplished

8


(Air permeability)

(Water tihghtness)


Capped, KE 50 Curtain Wall System enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths). It improves the visual richness of building with its flat, angular, almond and butt almond cap options.

Invisible details in the whole:• 50 mm body width• Single, dual or transom applications with joinerysystems to be added• Ventilation option with outward opening blind ventapplication• Aluminum profiles with wall thicknesses of 1.6, 2and 3 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished


9


The GE 50 ICV system, which enables certain height and aperture applications thanks to its decorative profiles with different depths, come with thermal insulation, consists of horizontal or vertical covers (lines), depending on the façade appearance. Moreover, with its flat, angular, cover and blank almond cover options, the system provides visual richness to the building

Invisible details in the whole:• 50 mm elevation width• Inward opening concealed vent, unvisible with50 mm mullion width.• Aluminium profiles with 1.6, 2 and 3 mm wallthickness,• Special polyamides reinforced with % 25 glass fibersfor thermally insulated profiles• Anodized and powder coated profiles in all RAL colorsproduced by QUALANOD and QUALICOAT certifiedproduction lines,• EPDM gaskets for dust, air and water tightness• Succesfully completed KAPEDAM performance tests

10


Capped, thrermally insulated IZO KE 50 system that enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths) consists of horizontal and vertical caps (lines) in respect of the exterior appearance of building. It also improves the visual appearance of building with its flat, angular, almond and butt almond cap options.

Invisible details in the whole:• 50 mm body width• Low thermal transmittance coefficient• Single, dual or transom applications with joinerysystems to be added• Ventilation option with outward opening blind ventapplication• Aluminum profiles with wall thicknesses of 2 and3,2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDMand silicone• Performance testing accomplished

11


Half-capped, non-insulated YE 50 system that enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths) consists of only horizontal (or only vertical) caps (lines) in respect of the exterior appearance of building. It also improves the visual richness of building with its flat, angular, almond and butt almond cap options.

Invisible details in the whole:• 50 mm body width• Building aesthetic enriched with horizontal or verticalcaps (lines)• Aluminum profiles with wall thicknesses of 1.6, 2and 3 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished

1


Glazing bead, thrermally insulated MN 86 Curtain Wall System that enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths) consists of thin and aesthetic grids in respect of the outside appearance of building.

Invisible details in the whole:• 86 mm body width• Inside and outside equivalent profile thicknessesimproving the visual taste• Low thermal transmittance coefficient• Outward opening blind vent application• Inward opening blind vent and blind hinge application• Usage opportunity of outward opening vent profilesin stables• Outside or inside installation opportunity• No need for silicone application• Aluminum profiles with wall thicknesses of1,7 - 2,9 mm• QUALANOD and QUALICOAT- certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• 25% glass fiber reinforced, ÇUHADAROĞLU-nameprinted, polyamide(imported) thermal break usage• Performance testing accomplished

(Air permeability)

(Water tihghtness)


(Thermal transmittance coefficient

(Thermal transmittance coefficient

(Resistance to opening and closing)


13


With structural silicone application, non-thrermally insulated SPS Curtain Wall System with complete glass appearance enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths). It improves the visual richness of building merely with glass appearance and provides ease of application and maintenance by inner connection opportunity.

Invisible details in the whole:• 50 mm body width• Ventilation option with outward opening blind ventapplication• Easy installation (service) opportunity thanks to innermountablevisual glass boards• Aluminum profiles with wall thicknesses of 2, 2.5and 4 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM,silicone and santopren.• Performance testing accomplished

14


With structural silicone application, thrermally insulated IZO SPS Curtain Wall System with complete glass appearance enables height distance (large clearance) applications thanks to transom and million profiles with different dimensions (various depths). It improves the visual richness of building merely with glass appearance and provides ease of application and maintenance by inner connection opportunity.

Invisible details in the whole:• 50 mm body width• Low thermal transmittance coefficient• Ventilation option with outward opening blind ventapplication• Easy installation (service) opportunity thanks to innermountablevisual glass boards• Aluminum profiles with wall thicknesses of 2, 2.5and 4 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM,silicone and santopren.• 25% glass fiber reinforced, ÇUHADAROĞLU printed,polyamide (imported) thermal break usage.• Performance testing accomplished

15


Steel reinforced, non-thrermally insulated AC 70 Curtain Wall System that enables height distance (large clearance) applications is able to realize all expectations of you with its flat, circular and butt almond cap options.

Invisible details in the whole:• 70 mm body width• Single, dual or transom opening options with additionaldoor and window systems• Aluminum profiles with wall thickness of 2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished

16


Making wide-opening applications possible thanks to its thrermally insulated unit profiles with high wind resistance, MN 85 EFS Unitized System includes linear grids and special geometrical shapes as far as the outer appearance of the structure is concerned. MN 85 EFS offers high thermal insulation, water and weather-proof properties and all the advantages of a unitized with quick on-site assembly. MN 85 EFS Unitized System has a unique anchoring design, low level of aluminum usage and other important benefits including quick on-site assembly, fast building delivery and low costs. The system allows the building to be ventilated in an efficient and natural manner (or by using an automation system) with the options of hidden winged transverse transoms and parallel opening wings.

Invisible details in the whole:• 120 mm unit profile depth• Low thermal transfer coefficient• Parallel and transverse transoms with hidden wingopening options• Aluminum profiles with metal thickness of 2.2 and3.5 mm• QUALANOD and QUALICOAT certified profilemanufacturing in all RAL color and eloxal options• Use of polyamide (import) thermal breaks with 25%fiberglass enhancement and ÇUHADAROĞLU imprint• EPDM and silicone filters for air, water and dustsealing• Successfully completed KAPEDAM performance tests

17

thermally insulated window / door systems

İZOPEN SL 60 HS

ST 60

İZO 75

IZO CA 75 IZO GM 75 AW 60

SL 45 HS

İZO C60 ST 70

ST 80 ST 80.S

The insulation of the noise is unavoidable with respect to human health, work efficiency, comfort and confidentiality. Residents should not be subjected to intolerable noise levels that are mainly determined by the noise insulation capabilities of the structural elements circumscribing the space, location of the noise sources and the purpose of use of the space in question. Majority of the noise within the enclosed areas is originated from outside, mainly as a result of inland, railway and air traffic. Should the noise level in the offices be at tolerable limits, the facades of the building need to be provided with the relevant noise insulation, depending on the height of the offices. ÇUHADAROĞLU heath and noise insulated frames and curtain wall systems ensures the noise levels in the enclosed areas to be at acceptable levels.

18


DE 50

SE 60 IZO SLS

İZO 67 İZO S110

BOOMERANG DFB

DE 60

SE 50 SL 60 HS

19


The window and door system İZOPEN, adding visual appeal, with its specific design, to your building, can increase your contact with the exterior to 80 to 90%. İZOPEN system profiles allowing for use of more transparent area have a frame width up to 70 mm in windows and up to 96 mm in doors owing to a design without glazing beads. Fast and easy assembly is possible thanks to the use of tightness vent, a special design puller produced on aluminum profiles, and edge wedge joints. With low aluminum consumption, the use of PVC system accessories, and the ease of assembly, the window and door system İZOPEN can meet all general application type requirements for public buildings and collective residential and residential buildings most economically

Invisible details in the whole:• High transparent area up to 80%,• Gasket on aluminum profiles• Vent design without a glazing bead,• PVC accessory usage,• Special T-cleat,• Special corner cleat,• 45 degree corner joint for inclined glazing bead,• Thermally-insulated aluminum profiles with a thicknessof 1.4 mm, 1.8 mm and 2 mm• 60 mm of construction depth• Natural anodized, white color profiles produced byQUALANOD and QUALICOAT certified• EPDM gaskets for dust, air and water tightness,• User friendly, diagrams for static and thermal options• Successfully completed performance tests inKAPEDAM (Turkey)

IZOPEN Thermally Insulated Window and Door System

(System Construction width)

(System Construction depth)

(Air permeability)

(Water tihghtness)




Technical Property)

Range of ApplicationWindowsBalcony Doors

Types of OpeningInward and outward opening windowsCasementilt and turnDouble ventTop hungBottom hungWindows with integrated doorInward and outward opening doorsBalcony doors

20


Combining high performance characteristics with sliding windows and doors, the SL 45 HS Sliding System is able to prevent rainwater even in winds up to 136 km/h. In addition to high thermal insulation values, the system has aesthetic appearance with narrow profile of 45 mm and also increases the visual contact between outside and inside. The costs of the assembly and labor have been decreased by using vent profile with glazing bead and accessory without drilled-screw connection. Apart from the stainless steel rail option, high strength polyamide rails ensure a quieter work compared to conventional systems.

Invisible details in the whole:• High water tightness (900 Pa),• High air permeability (Class 4),• High resistance to wind loads (A5) (2000 Pa),• High thermal insulation (RMG 2.1),• Up to 2 mm thickness of aluminum profile,• 45 mm construction depth of the sash,• High performance and new design EPDM gasketsfor dust, air and water tightness• Anodized and powder coated profiles in all RAL colorsproduced by QUALANOD and QUALICOAT certifiedproduction lines, and also wood effect options• User friendly diagrams for static and thermal options• Assembly of the accessories without drilled-screwconnection,• 45 or 90 degree frame options,• 80 kg or 200 kg vent weight options,• Easy glass assembly by using a glazing bead,• Stainless steel or high-strength polyamide rail options,• All in one profile; weatherdrip, rail of flyscreencondensation profile• Increasable lock points in horizontal and vertical line.• Successfully completed performance tests inaccredited laboratory (France)• Successfully completed performance tests inKAPEDAM (Turkey)



(Air permeability)

(Water tihghtness)



Technical Property)

SL 45 HS Thermally Insulated Lift and Slide System)

Range of ApplicationAll type of opening for windowsAll type of opening for doors

Types of OpeningSliding windowsSliding doorsLift and sliding doors

21


The SL 60 HS lLft and Slide Opening System enables swingable wings to close first by sliding, then moving the vent down, thus providing effective tightness. The SL 60 HS fenestration system, which offers with its normal vent type a harmony between an aesthetic aluminium façade look and glass, can also provide the visual stylishness of glass with its invisible vent type. SL 60 HS fenestration system can be applied in two swing options, single-action and double-action swings.

Invisible details in the whole:• Up to 2 mm aluminium profile thickness,• New design EPDM gaskets, for water and airpermeability with high level of tightness,• 150, 200 and 300 kg wing support options,• Highest light transmittance,• Easy glass assembling with use of a glazing beadvent application,• QUALANOD and QUALICOAT certified profileproduction in all Ral colours and eloxal options,wood-effect profile option,• Ability to use glass thickness from 3 mm to 47 mm,• Static and heat diagrams that facilitate the wholeprocedure, Successfully completed KAPEDAMperformance tests.

Range of ApplicationAll type of opening for windowsAll type of opening for doors

Types of OpeningSliding windowsSliding doorsLift and sliding doors



(Air permeability)

(Water tihghtness)


Technical Property)

SL 60 HS Thermally Insulated Lift and Slide System)

22


A thrermally insulated, economical joinery system with wide-ranging application options, meeting both your aesthetic and technical preferences.

Invisible details in the whole:• 60 mm casement profile depth• İn-swing and out-swing options• System profiles with 2 mm wall thickness• QUALANOD and QUALICOAT certified profileproduction in all Ral colors and eloxal options• EPDM air, water and dust tightness wicks• 25% fiberglass reinforcement, bearing theÇUHADAROĞLU logo, polyamide (imported) thermalbarrier• Wind, air, rainwater permeability tests and thermalinsulation test successfully completed at theKAPEDAM test laboratory.• Successfully completed performance tests

Technical Property)



24


ST 60 Window and Door System that improves the visual appearance of your building with its unique line and that reduces power consumption by 40 % low thermal transmittance coefficient is able to realize all your expectations with wide range of application options. ST 60 joinery system provides application and installation facilities with window enriched with D and R options and doors with same surface lines.

Invisible details in the whole:• Blind or normal hinged single axes or dual axeswindow applications• Draw-slide (HKS) or Folding (FS Portal) window anddoor applications• Blind or normal hinged inward or outward openingdoor applications• System details with thermal transmittance coefficientof Uw : 3,1 W/m2

• Thrermally insulated aluminum profiles with wallthicknesses of 1,6 mm, 1,8 mm and 2,1 mm• 60 mm case profile width• Imported thermal breaks• Surface treatment options with anodized colors andspecial effects, all Ral colors or Wooden appearance• QUALANOD and QUALICOAT certified surfacetreatment applications• Air, water and dust sealing filters made of EPDM• Static and thermal diagrams facilitating all process• Performance testing accomplished and IFT Rosenheim certificates

(Air permeability)

(Water tihghtness)




Technical Property)

24


ST 70 Window and Door System that improves the visual appearance of your building with its unique line and that reduces power consumption by 60 % with high thrermally insulated is able to realize all your expectations with wide range of application options. ST 70 joinery system provides application and installation facilities with window enriched with D and R options and doors with same surface lines.

Invisible details in the whole:• Blind or normal hinged single axes or dual axeswindow applications• Draw-slide (HKS) or Folding (FS Portal) window anddoor applications• Blind or normal hinged inward or outward openingdoor applications• Horizontal pivot window application• System details with thermal transmittance coefficientof Uw : 2,1 W/m2K• Thrermally insulated aluminum profiles with wallthicknesses of 1,6 mm, 1,8 mm and 2,1 mm• 70 mm case profile width• Imported thermal breaks• Surface treatment options with anodized colors andspecial effects, all Ral colors or Wooden appearance• QUALANOD and QUALICOAT certified surfacetreatment applications• Air, water and dust sealing filters made of EPDM• Static and heat diagrams facilitating all process• Performance testing accomplished and IFT Rosenheimcertificates

(Air permeability)

(Water tihghtness)




Technical Property)

25


(Air permeability)

(Water tihghtness)




Technical Property)

ST 80 Window and Door System that improves the visual appearance of your building with its unique line and that reduces power consumption by 68 % with very high thermal insulation is able to realize all expectations of you with wide range of application options. ST 80 Joinery System Provides application and installation facilities with window enriched with D and R options and doors with same surface lines.

Invisible details in the whole:• Blind or normal hinged single axes or dual axeswindow applications• Draw-slide (HKS) or Folding (FS Portal) window anddoor applications• Blind or normal hinged inward or outward openingdoor applications• System details with thermal transmittance coefficientof Uw : 1,65 W/m2

• Thrermally insulated aluminum profiles with wallthicknesses of 1,6mm, 1,8mm and 2,1mm• 80 mm case profile width• Imported heat barriers• Surface treatment options with anodized colors andspecial effects, all Ral colors or Wooden appearance• QUALANOD and QUALICOAT certified surfacetreatment applications• Air, water and dust sealing filters made of EPDM• Static and thermal diagrams facilitating all process• Performance testing accomplished and IFT Rosenheimcertificates

26


Sound Insulation Factur)

(Air permeability)

(Water tihghtness)




Technical Property)

The insulation of noise that might be described as undesired sounds is considered a necessity for human health, work efficiency, comfort, and privacy factors. The exposure of human beings to an acceptable sound level in spaces varies depending on the sound insulations of building elements surrounding the space, the sound resources and the intended use of the space.The majority of the sound within the space is arisen of outside environment as highway, railway and airway traffic noise. In order to obtain an acceptable sound level within the office, it is necessary for the façade to have a sufficient sound insulation level depending on the sound level height of the outside environment.ÇUHADAROĞLU ST80.S thermal and sound insulated joinery system enables to obtain acceptable sound levels in spaces

Building Faade Noise Insulation Value Depending on the Outdoor Noise Level

Noise Level ClassOrder

Related OutdoorEnvironmental

Noise-With Scala [db (A)]

Stationary Hospital andSanatorium Rooms

Residences, Hotel Rooms,Dormitories, Schools etc. Offices1

3

1) No requirement is specified for external structure components of rooms.2) Requirements will be specified according to local rules.3) Building facade includes window and wall or the cladded facade.

Room

Noise Reduction Value of External Structures Components, Rw.res [dB]

27


IZO 75 serial is a modern and aesthetic-looking blind vent, blind hinged capped window and curtain wall serial for you with its unique line.

Invisible details in the whole:• Profiles with the case dimension of 75 mm• Single opening, capped window and curtain wall serial• When looking from outside the vents are not visible,• KAPEDAM certified in air, water, inclination tests• KAPEDAM certified profiles with thermal transmissionof group 2,1 and German TEKNOFORM thermalbarriers• Aluminum surfaces with wall thickness of 2.0 mm.• Painting opportunity in QUALICOAT and QUALANODcertified RAL colors or anodized surface treatmentopportunity in various colors or wooden folio coatingopportunity.• All of the filters used in the system are EPDM andÇUHADAROĞLU name-printed.

IZO ÇA 75 serial is a modern and aesthetic-looking blind vent window serial for you with its unique line.

Invisible details in the whole:• Profiles with the case dimension of 75 mm• Dual opening, blind hinged window profiles• When looking from outside the vents are not visible• KAPEDAM certified in air, water, inclination tests• KAPEDAM certified profiles with thermal transmissionof group 2,1 and German TEKNOFORM thermalbarriers• Aluminum surfaces with wall thickness of 2.0 mm.• Painting opportunity in QUALICOAT and QUALANODcertified RAL colors or anodized surface treatmentopportunity in various colors or wooden folio coatingopportunity.• All of the filters used in the system are EPDM andÇUHADAROĞLU name-printed.

28


Thrermally insulated, economic joinery system with wide range of application options by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 50 mm case profile depth• Normal opening vent, dual axes, blind hinged dualaxes, sliding-transom, folding, pivot, outward openingoptions• System profiles with wall thicknesses of 1,6 mm and2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• 25% glass fiber reinforced, ÇUHADAROĞLU printed,polyamide (imported) heat barrier usage• Wind, air, rainwater leak tests and thrermally insulatedinsulation tests accomplished in KAPEDAM testlaboratories• Performance testing accomplished

Thrermally insulated, economic joinery system with wide range of application options by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 60 mm body depth• Normal opening vent, dual axes, blind hinged dualaxes, sliding-transom, folding, outward openingoptions• System profiles with wall thickness of 2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• 25% glass fiber reinforced, ÇUHADAROĞLU printed,polyamide (imported) thrermally barrier usage• Wind, air, rainwater leak tests and thrermallyinsulation tests accomplished in KAPEDAM testlaboratories• Performance testing accomplished

Technical Property)

(Air permeability)

(Water tihghtness)




Technical Property)



29


Economic thrermally insulated sliding joinery system by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 112 mm case profile depth• Two or three rail cases usage opportunity• Stable usage opportunity over or alongsidesliding joinery• Easy usage opportunity with imported rollers• Rich handle options• System profiles with wall thicknesses of 1,6 mm and1,2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options.• Air, water and dust sealing filters made of EPDM• 25% glass fiber reinforced, ÇUHADAROĞLU printed,polyamide (imported) thermal break usage• Performance testing accomplished

Economic thrermally insulated sliding joinery system by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 132 mm and 204 mm case profile depth• Two or three rail cases usage opportunity• Stable usage opportunity over or alongside slidingjoinery• Easy usage opportunity with imported rollers• Rich handle options• System profiles with wall thickness of 2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• 25% glass fiber reinforced, ÇUHADAROLU printed,polyamide (imported) thermal break usage• Performance testing accomplished

30


Thrermally insulated sliding joinery system by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 85,5 mm case profile depth• Easy usage opportunity with imported rollers• Rich handle option• System profiles with wall thicknesses of 1,6 mm and2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished

The SL 60 HS lift and slide opening system enables swingable wings to close first by sliding, then moving the wing down, thus providing effective tightness. The SL 60 HS joinery system, which offers with its normal wing type a harmony between an aesthetic aluminium façade look and glass, can also provide the visual stylishness of glass with its invisible wing type. With its wing bearing capacity of 150 kg, 200 kg and 300 kg, the SL 60 HS joinery system offers different opening options of single-action and double-action swings. The water and air tightness of the system is achieved through 4-step EPDM wicks that completely surround the wing profiles and the dust wick around the casement. With its separate housing for accessories, the SL 60 HS system is primarily designed to provide thermal isolation. While eliminating the use of doorsteps and obstructions at the entrance and exit with its casement profiles that slide on 4 edges, the wing profiles, which are assembled by corner crimping, give the opportunity for a rigid, easy and fast mounting.

Invisible details in the whole:• Applied in housings, hotels, french windows.• Case depth is 135 mm.• Vent depth is 60 mm.• Wall thickness is 1,6 mm.• Applicable for single vent or dual vent with two railcase.• Capacity to bear 150 kg., 200 kg., 300 kg.• In all anodized and (powder paint) ral colors

Aluminium Lift & Slide Blind Vent Sliding Joinery System

Aluminium Lift & Slide Sliding Joinery System

31


A thermal insulated, economical joinery system with wideranging application options, meeting both your aesthetic and technical preferences. Details hidden in the whole;

Invisible details in the whole:• 67mm casement profile depth• Normal swing wing, double axis, double axis withinvisible hinge, sliding-transom, folding options• System profiles with 2 mm wall thickness• QUALANOD and QUALICOAT certified profileproduction in all Ral colours and eloxal options• EPDM air, water and dust tightness wicks• 25% fibreglass reinforcement, bearing theÇUHADAROĞLU logo, polyamide (imported) thermalbarrier• Wind, air, rainwater permeability tests and thermalinsulation test successfully completed at theKAPEDAM test laboratory.• Successfully completed performance tests

A thermal insulated sliding joinery system, meeting both your aesthetic and technical preferences.

Invisible details in the whole:• 110 mm casement profile depth• Two-rail casement option• Rigid option above or on the side of the sliding joinery• Convenient use with imported rollers• Wide choice of handles• System profiles with 2 mm wall thickness• QUALANOD and QUALICOAT certified profileproduction in all Ral colors and eloxal options• EPDM air, water and dust tightness wicks• 25% fiberglass reinforcement, bearing theÇUHADAROĞLU logo, polyamide (imported) thermalbarrier• Successfully completed performance tests

Technical Property)



32


İZO GM 75 serial is a modern and aesthetic-looking blind vent, blind hinged window serial for you with its unique line.

Invisible details in the whole:• Profiles with the case dimension of 75 mm• Single opening, blind hinged capped window andcurtain wall serial• When looking from outside the vents are not visible,when looking from inside the hinge is invisible• KAPEDAM certified in air, water, inclination tests• KAPEDAM certified profiles with thermal transmissionof group 2,1 and German TEKNOFORM thermalbarriers• Aluminum surfaces with wall thickness of 2.0 mm.• Painting opportunity in QUALICOAT and QUALANODcertified RAL colors or anodized surface treatmentopportunity in various colors or wooden folio coatingopportunity.• All of the filters used in the system are EPDM andÇUHADAROĞLU name-printed.

AW 60 thrermally insulated, window and french window system evokes indoor actual wooden surface and pattern. Also, outdoor usage opportunity together with the visual aesthetic of aluminum enabling high protection against environmental conditions brings natural and modern linestogether.

Invisible details in the whole:• 60 mm body depth• System profiles with wall thickness of 1,6 mm• Single opening, dual axes and french windowopening options• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM.• 25% glass fiber reinforced, ÇUHADAROĞLU printed,polyamide (imported) heat barrier usage• Performance testing accomplished

33


Compatible with the architecture and aesthetic look of the building and practical due to its multi-functional design,Boomerang DFB (Driven from Bottom) Automatic Sliding Doors offer total secure solutions suitable for different usage. With its vent bearing capacity of 260 kg, the Boomerang DFB Automatic Sliding Door System provides suitable solutions for wide openings, while at the same time offering flexibility in use with its programmability.

Invisible details in the whole:• Cross-sectional front or back inclined options,• Outward left or right inclined options,• Vent bearing capacity of 260 Kg,• QUALANOD and QUALICOAT certified profileproduction in all Ral colors and eloxal options,woodgrain-finished profile option,• Ability to function at - 40 °C,• Requiring only 3 mm working clearance on the floor,thus providing a design that prevents people tostumble while crossing,• Use of 2-step silicone gaskets across the door frame,which reduces air permeability,

(Technical Property)

Maximum wing weight

Crossing clearance

System depth

Frequency of use

Ambient working temperature

Power supply

Maximum power consumption

Driver unit

Opening rate adjustment

Closing rate adjustment

Partial opening adjustment

Delayed opening adjustment

Night delayed opening adjustment

Static force adjustment Automatic

Guard against slamming Active at Open / Close

Photocell

34

The aluminum windows and doors are very important part of the residential and commercial buildings. They are allowing to transition of the some outside conditions to the inside; such as required daylight, natural fresh air etc. and preventing some of the others to pass inside, such as hot air in summer, cold air in winter, rain water, and excessive air infiltration. Consequently, the aluminium door and window systems can filter the inside and outside conditions depending on your psychological and physiological requirements. In addition to the filtering property, the aluminum windows and doors are the main construction material for reducing the energy consumption of the whole building for heating and cooling session, and also generating the energy. This will give a chance to the architect for decreasing the contamination of the earth by reducing the fuel consumption. The architect and engineers can meet the aesthetic appearance and technical requirements for all kind of window and door systems. The Aluminum system has been tested and certified in accordance with the national (TS) and international (EN, DIN, BS, NF, ASTM) standards.

ECO 60

SEZ 50

DB 60

C 60

EC 50

SLS 33 SLS 37

the non - insulated windows

35

ECO 60 is a new Aluminum Fenestration System with features the same ease of assembly and application types and dimensions as our C 60 system well known by manufacturers and users, but lower stocking costs, high safety values, a cylinder-type and easy adjustable hinge option, and most importantly aluminum consumption less by 25 to 35% for profiles and by 23 to 35% for fenestration.

Invisible details in the whole:• 25% less system weight• Aluminum profile thickness up to 2 mm• New design EPDM gaskets with high air and watertightness• Cylinder-type, casement hinges without disassemblingfrom outside and adjustable in operation• High-strength, economic, new design corner cleat• Natural anodized or White color powder coatedprofiles with QUALANOD and QUALICOAT certificationproduction lines.• User friendly diagrams for static options• Successfully completed performance testing byKAPEDAM.• Areas of application: doors, windows with integratedDoor, partition walls, entrance systems• Opening Types: inward and outward opening door,Casement, double vent, windows with integratedDoor, double acting doors• Construction width 128 mm• Construction depth 60 mm

The-non insulated joinery and window system suitable for height distance (large clearances) by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 60 mm body depth• Normal, dual axes, transom, outward opening orimpact opening options• System profiles with wall thickness of 2 mm.• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Wind, air, rainwater leak tests accomplished inKAPEDAM test laboratories• Performance testing accomplished


36

The-non insulated joinery and window system suitable for height distance (large clearances) by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 50 mm case profile depth• Normal, dual axes, transom, sliding-transom, outwardopening, folding or impact opening options• System profiles with wall thicknesses of1,6 mm and 2 mm.• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Wind, air, rainwater leak tests accomplished inKAPEDAM test laboratories• Performance testing accomplished

The-non insulated sliding joinery system by which your aesthetic and technical tastes are met together.

Invisible details in the whole:• 112 mm case profile depth• Easy usage opportunity with imported rollers• Rich handle options• System profiles with wall thicknesses of1,6 mm and 2 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished


37



Invisible details in the whole:• 66 mm case profile depth• Easy usage opportunity with imported rollers• Rich handle option• System profiles with wall thicknesses of1,6 mm and 1,8 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished


Invisible details in the whole:• 75 mm case profile depth• Easy usage opportunity with imported rollers• Fixed application option with glazing bead• Rich handle option, locking option with window barset due to rod system• System profiles with wall thicknesses of 1,7 mm and1,8 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Air, water and dust sealing filters made of EPDM• Performance testing accomplished

38


DB 60 is a serial that provides detail richness used in indoor wall applications. It is a system with depth of 60 mm and wall thickness of2 mm. Its technical specification is that rotations with all angles can be ensured up to 1800 with elegant designed articulated rotation profiles. Plug-socket groups for the installation of lines such as telephone, data, tv with cable duct within the plinth profile or inserted into the plinth profile provides elegant appearance. Single glass, double glazing, venetian blind between double glazing, vinyl coated panel can be used. Encoded, card, finger reader locking system is used with INTERAX door accessory options as laminate or glass security. It has been tested and its achievement has been approved together with ÇUHADAROĞLU profile accessory havingresistance for 5 years and 10 years and designed for the system.

39

skylight

The system allows structural silicone compounded application as well as it canbe applied as capped on both sides. It facilitates vaulting with its 1390 angle

vertical design. It comfortably settles on steel or aluminum bearing construction.It provides an economic solution in order to exceed basic systems.

40

The system allows structural silicone compounded application as well as it can be applied as capped on both sides. It facilitates vaulting with its 1390 angle vertical design. It comfortably settles on steel or aluminum bearing construction. It provides an economic solution in order to exceed basic systems.

The system al lows semi-st ructural s i l icone compounded application as well as it can be applied as capped on both sides. Even 3 - side angular constructions can be easily applied with body design in various angles. Profile bodies are designed to be able to be easily settled on steel or aluminum bearing construction since luminaire systems exceed large clearances mostly. It is an appropriate system in order to exceed large luminaire. Deep condensate and perspiration channel profiles are ideal for you to create perfect solutions for luminaire systems.

skylight

41

The system is applied as capped on both sides. It is a light serial designed for polycarbonate surfaces. The height distances (large clearances) of the system are designed to enable easy transition with steel or aluminum loadbearing construction. It is an economic system.

The sys tem al lows semi-s t ructura l s i l icone compounded application as well as it can be applied as capped on both sides. Luminaire ridge or corner returns can be easily adjusted thanks to free running neck designed profiles allowing corner and angular combinations. Profile bodies are designed to be able to be easily settled on steel or aluminum bearing construction. It provides adequate solutions for medium-scale luminaires. TE 50 enables easily combination with curtain wall and luminaire combinations and appears as an appropriate solution for winter gardens as it is a serial developed from E 50 façade system. Deep condensate and perspiration channel profiles are ideal for you to create perfect solutions for luminaire systems.

skylight

42

sun shades

One of the most important characteristics of the age of technology is to make sure to consume energy resources at a minimum level while at the same time maximizing the comfort level. In building designs this increasingly manifests itself as a basic design element. In ideal designs daylight is used to its maximum extent, while efforts are made to minimize the energy loss. Our Solar Shading Systems are designed to enable this optimal trend in buildings. Our solar shading systems, developed to respond to building needs and architectural aesthetics,are identified based on their profile width.

The non insulated sliding joinery system by which your aesthetic tastes are met together.

Invisible details in the whole:• 45 mm case profile depth• Easy usage opportunity with imported rollers• Rich handle options• System profiles with wall thickness of 1,5 mm• QUALANOD and QUALICOAT-certified profileproduction in all Ral colors and in anodized options• Successful sun blind functionality

43

security systems

Fire - Resistant Doors and Windows System

Fire has an important place among the hazards that human beings might encounter. We have no much option in case of the absence of afore-thought structural measures. FP 67 Fire-Resistant Aluminum Doors keep the fire expansion area at minimum level during 60 minutes and/or enables the escape of people to secure areas as well as all functionality of it. Smoke and heat are two damaging factors in fire and FP 67 prevents the exposure to these factors. During fire, it is necessary for the door to be stable, complete and thermo insulated within certain time periods and these properties should be proven in the tests to be performed in accordance with the standards. Images from Fire-resistance tests in Netherland –TNO Building and Construction Research Centre for Fire Research.

Invisible details in the whole:• Single-wing, double-wing, complete glass or opaqueE 30, E 60, E 90, EI 30, EI 60, fire-resistant doors• QUALANOD and QUALICOAT certified profileproduction in all RAL colours and eloxal options• Use of aluminium of the A1 incombustible materialgroup

Single-action wing

Double-action wing

Fixed

Single-action wing + Fixed

Swing Types

FP 67 Standard Dimensions

Nominal Dimensions Installation Clearance Door Panel or Glass

Fire Resistance Classes (According to DIN 4102 Part 5 and Part 13)

Period of Resistance(Minutes)

Doors Glass HeatWithout Transition

Glass HeatWith Transition

44

security systems

Blast Resistant Facade System and Doors

In the new world order, all civil and military settlements unfortunately become the focus of terrorist actions. Onthe contrary, the structural measures taken in exterior walls of buildings will enable that possible injury or deathincidents that might occur in bombing attacks are prevented. In this respect, ÇUHADAROĞLU Group have performed BomSTOP bomb-proof door and façade system designs and productions completely within its own organization. The bomb-proof site tests of the initial products have been accomplished and certified in the international Advantica test laboratories in England according to ASTM and EN standards. For possible bombing attacks; 100 kg TNT explosive 23,5 m distance tests, 12 kg TNT explosive 5,5 m distance tests, 20 kg TNT explosive 4 m distance tests have been accomplished in high security and non-destructive protection classes as well as creating special solutions for building-specific attack scenarios.

45

security systems

Bulletproof Windows and Doors

In modern-day conditions, the security of our buildings against increasing danger and threat factors remains limited with the securities of our door, window and curtain wall principally. When we desire to increase the security level and benefit from all advantages of aluminum, AR 83 bullet-proof aluminum joinery meets all these requirements. AR 83 enables a wide range of protection from gun attacks to G-3 machine gun attacks with armor profiles made of rather hard aluminum alloy with hard anodic oxidation coated surface. Images from Bullet-proofing tests in Netherland –TNO Defance, Security and Safety Research Group Munition Effects and Ballistic Protection.

AR 83 Technical Data

Bullet-proofness *1

Air permeability

Water tightness

Wind resistance

Heat permeability class *2

Maximum aperture *2

Property Value Reference

*1: Classification of possible armed attack types.2: Contact us for variables for the given values.*

9 mm parabellum bullet

357 magnum bullet

44 Rem. magnum bullet

7,62x51 G-3 machine gun bullet

46


Burglary Resistant Door and Window System

ST 70 BR joinery system provides superior technical specifications such as theft-resistance and thermal insulation while it offers a modern and aesthetic appearance for you with its unique line. According to general statistical data; approximately 20% of theft incidents experienced in multistorey buildings is from windows, 26% is from balcony doors; and approximately 26% of theft incidents experienced in single-storey buildings is from windows, 52% is from balcony doors. In class WK2 (BR2) theft incidents, thief tries to break and open window or door with additional tools (screwdriver, tweezers, and wedge). In these types of attacks, the sheltering requirement in the nature of human beings can be alive together with the sense of “trust” in modern-day buildings. In this context, ST 70 BR theft-resistant door and window systems meet all your requirements and expectations.

Theft-proofness



(Air permeability)

(Water tihghtness)


ST 70 BR Technical Data

Property

47

cladding system

PD Profiles are very elegant luxury aluminum profiles which can be used in the exterior and interior of all building types, in the areas of subbasement, spandrel and parapet, balcony rails, entrance doors and door arches, ceilings, offices, billboards and public spaces as an alternative to all pane siding materials. These profiles can be produced with eloxal or electrostatic paint in line with Qualicoat and Qualanod specifications. TPE (Turkish Patent Institute) patented PD Profiles by ÇUHADAROĞLU have their own sub construction details in aluminum. They can be used with all types of insulating sheets (EPS, XPS, Rock wool, Glass wool). PD Profiles are in perfect harmony with A L U C O B O N D , a n o t h e r s i d i n g p r o d u c t b y ÇUHADAROĞLU Metal Sanayi A.Ş., in terms of both color and mechanical features, and they are similar with respect to the siding, too. This ensures a visual coherence in the building. ÇUHADAROĞLU Metal Sanayi A.Ş. recommends Ki-Kem brand Compact Laminate siding, another ÇUHADAROĞLU product, to be used with PD Profiles in the projects. PD Profiles make up modern lines in interior and exterior siding applications when used with compact laminate and double component aluminum materials.

ÇUHADAROĞLU CLS Compact Laminate Sub-Construction System has been produced from aluminum profiles which enable to fixing Kikern compact laminate sheets to the building securely and this makes the facade more aesthetic. The cladding of facade by the ventilated CLS Compact Laminate Sub-Construction System, the penetration of rain is minimised and condensation water is drained out easily. With different fixing choices of CLS sub-construction cladding by the compact laminate it is to have a new and different looking.

Invisible details in the whole:• Low aluminum consumption• Fast and easy assembly• Different fixing choices• Application for 6mm and 8mm thickness compactlaminate• QUALANOAD and QUALICOAT certified profileproduction in all Ral colours and eloxal options.

Panova Aluminum

Business

Transcript of Panova Aluminum