PQR Template (Asme)
2
QW-483 SUGGESTED FORMAT FOR PROCEDURE QUALIFICATION RECORDS (PQR) (See QW-200.2, Section IX, ASME Boiler and Pressure Vessel Code) Record Actual Conditions Used to Weld Test Coupon Company Name Procedure Qualification Record No. Date WPS No. Welding Process (es) Types (Manual, Automatic, Semi-auto) Joints (QW-402) Groove Design of Test Coupon (For combination qualifications, the deposited weld metal thickness shall be recorded for each filler metal or process used.) BASE METALS (QW-403) POST WELD HEAT TREATMENT (QW-407) Material Spec Temperature Type or Grade Time P no. To P No. Other Thickness of Test Coupon Diameter of Test Coupon Other GAS (QW-408) Percent Composition Gas (es) (Mixture) Flow Rate FILLER METALS (QW-404) Shielding SFA Specification Trailing AWS Classification Backing Filler Metal F No. Weld Metal Analysis A No. Size of Filler Metal ELECTRICAL CHARACTERISTICS (QW-409) Other Current Polarity Weld Metal Thickness Amps Volts Tungsten Electrode Size POSITION (QW-405) Other Position of Groove Weld Progression (Uphill, Downhill) TECHNIQUE (QW-410) Other Travel Speed String or Weave Bead Oscillation PREHEAT (QW-406) Multipass or Singles Pass (per side) Preheat Temp. Single or Multiple Electrodes Interpass Temp. Other Other
Transcript of PQR Template (Asme)
QW-483 SUGGESTED FORMAT FOR PROCEDURE QUALIFICATION RECORDS (PQR) (See QW-200.2, Section IX, ASME Boiler and Pressure Vessel Code)
Record Actual Conditions Used to Weld Test Coupon
Company Name Procedure Qualification Record No. Date WPS No. Welding Process (es) Types (Manual, Automatic, Semi-auto) Joints (QW-402)
Groove Design of Test Coupon
(For combination qualifications, the deposited weld metal thickness shall be recorded for each filler metal or process used.) BASE METALS (QW-403) POST WELD HEAT TREATMENT (QW-407) Material Spec Temperature Type or Grade Time P no. To P No. Other Thickness of Test Coupon Diameter of Test Coupon Other
GAS (QW-408) Percent Composition Gas (es) (Mixture) Flow Rate FILLER METALS (QW-404) Shielding SFA Specification Trailing AWS Classification Backing Filler Metal F No. Weld Metal Analysis A No. Size of Filler Metal ELECTRICAL CHARACTERISTICS (QW-409) Other Current
Polarity Weld Metal Thickness Amps Volts Tungsten Electrode Size POSITION (QW-405) Other Position of Groove Weld Progression (Uphill, Downhill) TECHNIQUE (QW-410) Other Travel Speed
String or Weave Bead Oscillation PREHEAT (QW-406) Multipass or Singles Pass (per side) Preheat Temp. Single or Multiple Electrodes Interpass Temp. Other Other
QW-483 (Back) PQR No.
Tensile Test (QW-150)
Specimen No. Width Thickness Area
Ultimate Total Load
lb
Ultimate Unit Stress
psi
Type of Failure & Location
Guided Bend Tests (QW-160) Type and Figure No. Result
Toughness Tests (QW-170) Impact Values Specimen
No. Notch
Location Specimen
Size Test
Temp. Ft. lbs % Shear Mils Drop Weight Break (Y/N)
Comments
Fillet Weld Test (QW-180) Result- Satisfactory: Yes No Penetration into Parent Metal: Yes No
Macro - Results
Other Tests Type of Test Deposit Analysis Other
Welders Name Clock No. Stamp No. Tests Conducted by Laboratory Test No. We certify that statements made in this record are correct and that the test welds were prepared, welded, and tested in accordance with the Requirements of Section IX of the ASME Code Manufacturer Date By (Detail of record of tests are illustrative only and may be modified to conform to the type of and number of tests required by the Code
