Powering MEMS portable devices - Deep Blue - University of Michigan
Powering on Devices
-
Upload
ccvineyard -
Category
Documents
-
view
23 -
download
0
description
Transcript of Powering on Devices
-
TV Use remote labeled TV. Press the green POWER button on the top right.
AV Receiver (two options) - Use remote labeled AUDIO. Press the green button - Without remote Press large circular button on front left of RECEIVER
DVD Player (two options) - SOUND BOARD Power is required for DVD PLAYER- Use remote labeled DVD. Press the Red button- Press unlit button on front of DVD player
Cable Box - SOUND BOARD Power is required for CABLE BOX- Use remote labeled Press CABLE (top center) then POWER.
Sound Board - Should not be turned o . Green light should be on. - If this is not the case there is a toggle switch on the back of the board.
CD / Cassette Player - SOUND BOARD Power is required for CD / CASSETTE PLAYER - Ensure Power Toggle button is depressed LCD Screen should be lit.
Power On Devices