Polaris FOG-100 - gemrad.com · Meteo Radar ECDIS INERTIAL MEASUREMENT UNIT FGC-100 Display Unit...
4
POLARIS FOG-100 The strapdown gyrocompass based on state-of- the-art Fiber Optic Gyroscope technology offers a highly reliable and cost effective solution for both commer- cial and military vessels. It gives an accurate, real-time reading of true North as well as control of attitude and positioning without need of external references. Ideal for: Large Patrol Vessels Amphibious Assault ships POLARIS FOG-100 POLARIS FOG-100 Heading /Attitude Reference System Inertial Navigation System Certificate N°: 94 022 - 10 HH Certificate N°: 94 838 - 10 HH Certificate N°: 94 849 - 10 HH Notified Body N°: 0098 Guidance, Navigation & Positioning
Transcript of Polaris FOG-100 - gemrad.com · Meteo Radar ECDIS INERTIAL MEASUREMENT UNIT FGC-100 Display Unit...
POLARIS FOG-100
The strapdown gyrocompass based on state-of- the-art Fiber Optic Gyroscope technology offers a highly reliable and cost effective solution for both commer-cial and military vessels. It gives an accurate, real-time reading of true North as well as control of attitude and positioning without need of external references.
Ideal for:
Large Patrol VesselsAmphibious Assault ships
POLARIS FOG-100POLARIS FOG-100Heading /Attitude Reference System
Inertial Navigation System Certificate N°: 94 022 - 10 HHCertificate N°: 94 838 - 10 HHCertificate N°: 94 849 - 10 HHNotified Body N°: 0098
Guidance, Navigation & Positioning
24 Vdc
Log GPS
NMEA 0183 OUTPUT
Meteo Radar ECDIS
INERTIAL MEASUREMENT UNIT FGC-100
Display Unit DU68-27
Repeater MR33D(optional)
Repeater MR34D(optional)
Power Supply Unit PSU-18000(optional)
• FGC Inertial Measurement Unit
• Display Unit DU68-27
• Cable of connection (10 m)
• Technical manual of the system in English language
• Certificate of conformance
SUPPLY COMPOSITION
* Self-aligning repeaters MR33D, MR34D
• Power Supply Unit PSU-18000
• 115/220 Vac, 50 Hz, 1 phase mains available through external unit
• NMEA 0183 -> synchro available through external unit
OPTIONS
Power Supply Fiber-Optic Gyrocompass
Environmental conditions
Interfaces
Operating temperatureStorage temperatureDamp heatVibrations
WaterproofElectromagnetic interferenceMTBF
0 °C to + 55 °C-40°C ÷ 80°Cup to 95% at 40° CFully compliant with IEC-60945 (sweep 2 Hz - 13.2 Hz at ± 1 mm, 13.2 Hz - 100 Hz at 7 m/s2 and for 2 h on each resonance, otherwise 2 h at 30 Hz in all three axes)in accordance with IP66 standardFully compliant with IEC-60945≥ 100,000 hours
3 serial7 serialIEC61162, BinaryRS422 or RS2320.025 Hz to 100 Hz (user-defined)
InputOutputOutput protocolI/O serialOutput rate
SupplyPower consumptionProtection
24 VDC -10% +30%Typical 12 W (24 V, 0.5 A)Against over-voltage, low voltage and inversion of polarity
TECHNICAL SPECIFICATION
0.2°5 cm or 5% whichever isgreater
< 10min (static)< 30min (full accuracy, all conditions)
≤ 3 m CEP (GPS signal available)≤ 1.8 NM / 12h CEP (with LOG aiding)≤ 3.5 NM / 12h CEP (full inertial)
0.05° RMS
HeadingSec (Lat) RMS Roll/Pitch HeavePosition accuracy (TRMS) Settling time
DU68-27 Repeater
MR33D Repeater / MR34D Repeater
WidthDepthHeightWeight
WEIGHT AND DIMENSIONS DU68-27FGC-100234 mm148.5 mm224.2 mm1.2 Kg
328 mm177 mm167.5 mm6.8 Kg
Display sizeDisplay coloursDisplay resolutionDisplay type
DISPLAY UNITcolor 6.5” Touch Screen256640 x 480 pixel (VGA)Transflective color TFT LCD
MAIN TECHNICAL DATA
Interface RS422, standard NMEA0183Baud rate 4800bps Input voltage 24Vcc (through external unit) Power consumption: 5WResolution 0.1°Repeater accuracy: ± 0.025°Operating thermal range: -25 ÷ + 55°CStorage thermal range: -25 ÷ + 70°CFinishing: MR34-D (IP56), MR33-D (IP40)
dimensions in mm.OUTLINE DRAWING7”
DIS
PLAY
UNI
T D
U68-
27MR
33D
REP
EATE
R (o
ptio
nal)
PSU-
1800
0 PO
WER
SUP
PLY
UNIT
(opt
iona
l)
MR34
D RE
PEAT
ER (o
ptio
nal)
FIBE
R-OP
TIC
GYRO
COM
PASS
FGC
-100
ø 6.5
N. 8 Hole
ø4.5
214.2
1022
4.2
148.539
80 656.5
7.5
206.2
23234
157.5
157.524.35 24.35
R12
188±
0.1110
±0.2
37
3
110 ±0.2537
198±
0.2
Estimated Weight: 5 Kg
Estimated Weight: 5.7 Kg
Estimated Weight: 1.2 Kg
Estimated Weight: 2.4 Kg
1913.11
192
88
56
96
21
2.03
181.4
2
208
ø 208
36.5
104
57
Estimated Weight: 6.8 Kg.
177
300
70
28.5 53
.7 98.7
10
167.5
32878
.7
35
153
138.3
153
150
150
N.4 FIXING HOLES ø7
CENTRE OF GRAVITY
30280
149
8
200
40
300
200
252
50
40
© A
pril
27, 2
018
This brochure should not be considered a contractual offer. The specifications given herein may be changed by the manufacturer, GEM elettronica S.r.l., without notice.
[email protected] www.gemrad.com
