Point-to-Point Setup ZIXI IP Transport ©2018 R.L. Drake Holdings, LLC 937-746-4556 Point-to-Point...

www.rldrake.com ©2018 R.L. Drake Holdings, LLC.

937-746-4556

Point-to-Point Setup

ZIXI IP Transport Reliable Open Internet Based Solution

1 CONFIDENTIAL

3-14-2018 v4


937-746-4556

Point-to-Point Application HD/SD H.264

Zixi-Link over Public Internet

Encode Decode

Input HD/SD-SDI or

Composite

Output HDMI, Component, Composite


937-746-4556

Point-to-Point Application Setup Overview

Internet

Encoder

Decoder

Input HD/SD-SDI or

Composite

Router or Cable Modem

Router or Cable Modem

IP Address DHCP or Static

Data IP Address Example: 192.168.1.9

Set Port Forwarding in Switch/Router or Cable Modem to Decoder IP Address

192.168.1.9 Use UDP port 2088

Bi-directional

Public IP address of Router or Cable Modem Example Public IP Address: 47.203.116.40

Enter this IP address in the Encoder

Default Remote Control

IP Address: 172.16.80.1

Please note: You can also use

the Data IP Address for management of

the Decoder

TV

HDMI

Output HD/SD-SDI or

Composite

IP Address DHCP or Static

Default Remote Control

IP Address: 172.16.70.1

SFP IP Address Example: 192.168.1.155

Router Status: Connected Connection Type DHCP IP Address 47.203.116.40


937-746-4556

Point-to-Point Application Encoder

Output IP UDP or ZIXI

Input HD / SD SDI or Composite


937-746-4556

PEG Encoder Login �  Log into PEG Encoder

�  Default Control IP address: http://172.16.70.1/ �  Log in “admin’ and password “pass”

5


937-746-4556

PEG Encoder Tab Under the Encoder Tab

�  Change Host Address to the Public IP address of the Router or Cable Modem Example: 47.203.116.40 �  Confirm Port: 2088, Channel, and Password match Decoder settings

6


937-746-4556

PEG Encoder Management �  To use the SFP Port IP address for management

�  Change HTTP Server Enable parameter to “Enable”

7


937-746-4556

PEG Status Tab �  Under the Status Tab

�  Confirm Zixi Stream Status

8


937-746-4556

Point-to-Point Application Decoder

Output HDMI, Component, or Composite

Input IP or 8VSB/Clear QAM


937-746-4556

Setup ND-24-IP Decoder

•  Confirm control (management) port IP address from front panel •  From front panel: Network Settings, Select “ENTER”

•  Display will show: >Control (eth1) and Data (eth0) •  Select “ENTER” Display will show: > Display IP and

Display MAC

•  Select “Enter” Display will show IP: IP address (eth1) xxx.xxx.xxx.xxx (default IP Address: 172.16.80.1)

•  Configure laptop IP address on the same network as decoder control (eth1) address

•  Log into ND-24-IP control (management) port using laptop

10


937-746-4556

ND-24-IP Decoder Data Port Set DHCP

•  Set data (input) port to DHCP •  From the front panel: Network Settings: Select “Enter” •  Display will show: Control (eth1) and Data (eth) •  Select “down arrow button” •  Display will show: >Data (eth0) •  Select “Enter” Display will show: Edit Cfg (eth0) •  Select “Enter” Display will show: Enable DHCP •  Select “Enter: Display will show Enable DHCP [YES] / NO •  Select “Enter” to enable DHCP •  From the front panel: Network Settings: Select “Enter” •  Display will show: Control (eth1) and Data (eth0) •  Select “down arrow button” to Display Data (eth0) •  Select “down arrow button” to Display IP •  Select “Enter” to Display IP Address (eth0) xxx.xxx.xxx.xxx

11


937-746-4556

ND-24-IP Decoder Data Port Set Static

•  Set data (input) port to Static IP •  From the front panel: Network Settings: Select “Enter” •  Display will show: Control (eth1) and Data (eth) •  Display will show: >Data (eth0) •  Select “Enter” Display will show: Edit Cfg (eth0) •  Select “Enter” Display will show: Enable DHCP and Edit

Address •  Select “down arrow button, ‘ Edit Address •  Enter IP address using the arrow buttons •  Select “down arrow button, ‘ Edit Netmask change

address using arrow buttons •  Select “Enter: and “down arrow button’ to Edit Gateway •  Enter IP address using the arrow buttons and Select

“Enter: •  Select the Left Arrow button 3 times to go back to

Network Settings

12


937-746-4556

Router or Cable Modem Port Forwarding

13

•  Create Port forward rule IP xxx.xxx.xxx.xxx (example 192.168.1.9)

•  Select Custom Ports and enter port 2088 (Bi-directional)


937-746-4556

ND-24-IP Control Panel Tab

14

•  Under Control Panel Tab, Set Source Type to “Zixi Push” •  Set Zixi port number: “2088” •  Set Channel/Stream ID “1” •  Set Password, For example: ”hockey” •  Set Program Selection: “Auto”


937-746-4556

ND-24-IP System Tab

15

•  Under System Tab, Confirm Add-on Feature to say “zixi”


937-746-4556

ND-24-IP A/V Settings

16

•  Under Video Format Select: 1080i:59.94

•  Under Enable SD-SDI Select: Enable


937-746-4556

ND-24-IP Output connection

17

•  Connect Cables to view video

Composite video

HDMI

And/Or


937-746-4556

Technical Support

For products and service information please visit www.rldrake.com

18

R.L. Drake Holdings, LLC Phone: 937-746-6990 [email protected]

Point-to-Point Setup ZIXI IP Transport ©2018 R.L. Drake Holdings, LLC 937-746-4556 Point-to-Point...

Documents

Transcript of Point-to-Point Setup ZIXI IP Transport ©2018 R.L. Drake Holdings, LLC 937-746-4556 Point-to-Point...