PLATZ ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL.pdf

8/12/2019 PLATZ ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL.pdf

1/92

ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL

Wise automation engineering(Zhejiang) co.,ltd Address:No8 wuyi road economic development zone.Jiashan Zhejiang P.R.CTel:0573-84185800 Fax:0573-84185809 Http://www.wise56.com E-mail:wise @public.js.jxptt.zj.cn

1

PLATZ AS/RSCOMPUTER SOFTWARE SYSTEM

USER MANUAL

WISE AUTOMATION ENGINEERING(ZHE JIANG)CO.,LTD.

2012-10

PDF !"# "pdf Factory Pro" $#%&'( ) www. f i nepri nt . com. cn
http://www.wise56.com/mailto:@public.js.jxptt.zj.cnhttp://www.fineprint.com.cn/http://www.fineprint.com.cn/http://www.fineprint.com.cn/http://www.fineprint.com.cn/mailto:@public.js.jxptt.zj.cnhttp://www.wise56.com/


2/92



2

Catalog CHAPTER 1 AS/RS SYSTEM GENERAL SITUATION .....................................................................................3

1.1 AS/RS LAYOUT...........................................................................................................................................3

1.2 HARDWARE SYSTEM CONTROL STRUCTURE....................................................................................4

1.3 ERP-ASRS-DEVICE INTERFACE..............................................................................................................4

1.4 ERP-ASRS SYSTEM FLOW CHART .........................................................................................................5

1.5 AS/RS COMPUTER SYSTEM SPECIFICATION LIST .............................................................................6

CHAPTER 2 AS/RS DP SYSTEM GENERAL OPERATION..............................................................................7

2.1 AS/RS OPERATION ENVIRONMENT ......................................................................................................7

2.2 AS/RS DP SYSTEM MODE OF ENTRY ....................................................................................................7

2.3 ELEMENTARY OPERATION MODE........................................................................................................8

CHAPTER 3 AS/RS DP SYSTEM FUNCTION MODULE................................ ...................................................15

3.1 BASIC CODE ................................................................................................................................................15

3.2 DAILY AS/RS OPERATION .........................................................................................................................28

3.3ASRS STOCK.................................................................................................................................................493.4 WAIT FOR ASRS PROCESS DATA ............................................................................. "#$%&'( 3.5WORK FILE ...................................................................................................................................................54

3.6 REPORT && ANALYSIS..............................................................................................................................60

3.7SECURITY MANAGEMENT........................................................................................................................73

CHAPTER 4 AS/RS ONLINE CONTROL SYSTEM.............................................................................................82

CHAPTER 5 AS/RS UPDATE SYSTEM.................................................................................................................87

CHAPTER 6 AS/RS SYSTEM EXCEPTION AND HANDLING.........................................................................92

6.1 PLC CONTROL DEVICE S RUNNING EXCEPTION AND HANDING SOLUTION...........................92

http://www.wise56.com/mailto:@public.js.jxptt.zj.cnhttp://www.fineprint.com.cn/http://www.fineprint.com.cn/http://www.fineprint.com.cn/mailto:@public.js.jxptt.zj.cnhttp://www.wise56.com/


3/92



3

CHAPTER 1 AS/RS SYSTEM GENERAL SITUATION

1.1 AS/RS LAYOUT



4/92



4

1.2 HARDWARE SYSTEM CONTROL STRUCTURE

1.3 ERP-ASRS-DEVICE INTERFACE



5/92


6/92



6

1.5 AS/RS COMPUTER SYSTEM SPECIFICATION LIST

ITEM NAME DESCRIPTION QTY REMARK

1 DB SERVER DELL T420 1 DATABASE SERVER

2 SERVER OS SBS2011 1

3 ON-LINE Dell 790MT 1

4 DP Dell 790MT 2

5 UPS 3KVA 1 SERVER

6 PRINTER HP 1 REPORT PRINT

7 MOXA CP-118U 1 8 PORT

8 SWITCH HUB D-LINK 1

9 WINDOWS 7 MICROSOFT 3

PDF !"# "pdf Factory Pro" $#%&'( www. f i nepri nt . com. cn
http://www.wise56.com/mailto:@public.js.jxptt.zj.cnhttp://www.fineprint.com.cn/http://www.fineprint.com.cn/mailto:@public.js.jxptt.zj.cnhttp://www.wise56.com/


7/92



7

CHAPTER 2 AS/RS DP SYSTEM GENERAL OPERATION

2.1 AS/RS OPERATION ENVIRONMENTnetwork operating system : Windows SERVER 2003workstation :Windows XPdatabase system :MS SQL Server 2000

proscenia development tool :SYBASE Power Builder 9.0,Borland DELPHI 7.0

2.2 AS/RS DP SYSTEM MODE OF ENTRY double-clicks on the workstation tabletop the related icon then to enter the corresponding system.

1* The DP system enters the "login user regist" ( picture 2 )

picture 2

The input system manager assigns to register the code, the password, if is not right, then message "please input

again!", if exit,then click exit button,if the password are correct, then enters the system MDI host window (picture 3),

then carries on each information handling of traffic.



8/92



8

(picture 3)

2.3 ELEMENTARY OPERATION MODEApplication procedure is similar with other Windows the XP, this system function mainly by the menu, the tool

strip, the window, the report form realizes. Among them, the majority of procedure is WISE to develop, Has certain

demonstration style, the function formidable base class window and the report form, then defers to the user demand

to carry on the design directly

1. menu

The menu is the entrance for the operator uses the system, the user may carry on the system operation through

the operation menu, the operation menu has two ways:

(1) Uses the keyboard to operate

May use on the keyboard the ALT key to activate the menu, then choose the menu with the cursor key,

execute the menu item with the enter key.

(2) Uses the mouse to operate

The user use mouse control menu quite is convenient, first selects some menu item is ok

2. Tree menu

Can the more convenient choice menu item, only have to open out the menu item, then may click on the

selection. The concrete function is consistent with the menu.

3. window

(1) window basic control picture 7



9/92



9

window yes computer be like user proceed interlocutory mostly interface,user mostly throughthe medium of window proceed data-in, output function. window be formed of some control,sawchart four,thereof operate and general win95 / win98 cum office subaltern operate

(2) window working order The window state, may divide into the original state, the query state, the modi state, the additional state.

(3) window style The window operation has four kind of styles, respectively is the execution, the input, the printing.

When system run may open many windows, the identical time only can in the current window operation,

be only effective to the tool strip to the current window

execute window This kind of window does not have the tool strip, cannot execute processing to the data material. But may

execute some fixed function in the backstage. As picture

Sheet no query

Good editor

Next pulls the type

tabulation

Single

Reelectionframe

Text input frame

Command button

PDF !"# "pdf Factory Pro" $#%&'( + www. f i nepri nt . com. cn


10/92



10

(picture 8)

GRID style

One kind is the grid type,show manay item records, another kind is the free form, only show a record. Like

Figure 9. Generally uses in the field few basic code data processing, like chart



11/92



11

(picture 9)

4. toolbar

The tool strip is the operation one kind of tool, is a menu another kind of expression. Is WISECorporation has custom-made the design specially, mainly is aims at the above style the datawindow.The data window plate, query, printing functions and so on increases, deletes, the revision,saves all all may complete through the tool strip.

both toolbar each puxh button definition and operate direction for use as follows:

First article button: Under the inquiry condition uses, show the first record .

Preceding button : Under the inquiry condition uses, show the before record .

Next button : Under the inquiry condition uses, show the next record

Last button :Under the inquiry condition uses, show the last record .

Revision button:To the current record revision, and enters the edition condition

insert record button :Inserts a detailed data.

Deletes record button:Under edition condition available,Deletion data

copy button:Under edition condition available, May duplicate the data material

Glue button :Under edition condition available, The information duplicates which the buffer in inserts to the



12/92



12

current cursor is an expert to good expert

save button: do with data modification operate save solstice database middle,combine redound

query state

Cancels the revision button: do with data modification wait operate Cancel,get make amendment

of prevenient data mode breath

Filtration button:Filtration data material. The inquiry condition input divides into the precise inquiry and the

condition inquires two kinds, each kind of data type concrete operation as follows:

Character inquiry: Direct input character, if in the field has the field of DDW (DropDownDataWindows)

or DDL (DropDownList) to be possible directly to choose, or direct input. For example: Directly inputs

205081007SPK01E in field, the system can be the 205081007SPK01E work files information filters Travel

Card. At the same time, when this field editor form is dropdowndatawindows (ddw) or DropDownList (ddl),

may directly from selection correct option , like product name field in the product code window; When the field

editor form is checkbox (or radiobutton) was elected, may filter all materials of this field value is ' Y ', if filter by condition is ' Y ', after then must select, then cancels, after clicks filters, filtered the material is all materials

of checkbox (or radiobutton) the value is ' Y ', otherwise, the system will be able to possess all material to filter..

Date inquiry: Directly inputs the date in the date field which must inquire, if in ! IoTime field inputs

2005-10-02, the system can possess Io Time to be equal to 2005-10-02 work files material filters;

Value inquiry: The direct input value, system can filter conform to the input condition that material, if

inputs 1000 in the Qty field, system can possess product Qty to be equal to 1,000 product information;

Besides the above equivalent inquiry, system also provides some operator inquiries.

All data type, may adopt the operation expression, like ( >, = , =2005-10-02 inIoTime field, system can possess Io Time to be bigger than was equal to 2,005/10,/02 work files material; If

inputs =1000 in the Qty field, the system can possess the product Qty to be bigger than was equal to 1,000

products information.

Moreover, also provides three kind of inquiries matches symbol to the character:

A. Behind Character add-on ' % ', expressed the material which all tallies which inputs the character

begins. If in the product code window, inputs B% in the type code field,when clicks the filters button, system

can possess the product type is the product correlation information which B begins filters;

B. Behind character add-on ' ^ ' ,expression all conforms to the character ending material which inputs. If

inputs A^ in the product type code field, when clicks the filters button, system can possess the product type is

the A ending product correlation information filters;

C. Behind Character add-on ' & ', expressed all contains the input the character material, if inputs B& inthe product type code field, when clicks the filters button, system can possess the product type code to contain

has B the product correlation information to filter.

Moreover, system also provides to the information personnel through the SQL sentence direct inquiry

function, does not recommend the commonly personnel to use.r

Renovates the record button: data among renovate database .

5. report print accounting print possess unify interface,vide infra chart(picture 10) into among these system



13/92



13

( picture 10)

The input inquiry condition, the click filtration button, will show the query data, like (picture 12). After the click

printing button, can appear the printing establishment window. According to the prompt establishment printer, the

click starts the button, then outputs the printer

(picture 11)



14/92



14

(picture 12)

Preview form. When the rod is selected, may adjust all around page distance. When is

selected crosswise, establishment printing direction for crosswise, otherwise is the longitudinal printing.

The establishment printing and looks at the reproduce by pantograph in advance, when

will click < reduces picture which printing and will look at in advance, when will click > enlarges the picture

which the printing and will look at in advance.



15/92



15

CHAPTER 3 AS/RS DP SYSTEM FUNCTION MODULE

3.1 BASIC CODE) Program Code * pdc_bas_moxp ) Program Description * Bas Moxp) Function * Query , modify ) Parent Class * winbase1) Datebase Table * asr_bas_mox ) Use Department * IT ) Use opportunity * When Setup serial port communication equipment corresponding port uses) User Interface *

) Purpose * ASRS s ONLINE The program can henceforth show withdraws the serial port communication equipment

corresponding port code number.) Field *

MOX , Crn1 Port , Plca Port may input,Other field has not used.) Operation Declaration * u Field explanation:

1. MOX:Input 1.2. Crn1 Port , Plca Port,Needs to match with the computer s COM hypothesis.

) Remark *

Does not allow to insert,delete,only can keep has a note.When discovers some serial port damage(The Computer serial port + mox card + pci card),The

corresponding equipment wiring may exchange on other serial port,Must in this Program modify

corresponding serial port number, otherwise the online procedure is unable the normal work.



16/92



16

) Program Code * pdc_bas_wrkstatus ) Program Description * Bas Wrkstatus) Function * Query ) Parent Class * winbase1) Datebase Table * asr_bas_wrksts ) Use Department * IT And correlation user partments) Use opportunity * Inquiry system definition Work file in/out work execut status) User Interface *

) Purpose * ASRS - ONLINE,The UPDATE System is defers to WORKFILE ID By work status, the equipment

actuation and the data processing.

) Field * All Column not input ,except Status Code , Work ID Status Description.

) Remark *

The table data only supplies the inquiry.

1, 5 in Work file status value.11, 15 Out work file status value;13 is the expression appears empties the storehouse,The system

automatically turns the work file corresponding id data active status value 13.



17/92



17

) Program Code * pdc_bas_iotype ) Program Description * Bas Iotype) Function * Query ) Parent Class * winbase1) Datebase Table * asr_bas_wrksts ) Use Department * IT And correlation user partments) Use opportunity * Inquiry system establishment Work file leaves the warehousing work type code number ) User Interface *

) Purpose * ASRS s ONLINE system,The UPDATE system is can defer to WORKFILE ID the work type value, Update

location s status by Value.) Field *

All Column not input ,except IO type code , Priorty , work id type description.) Remark *

The table data only supplies the inquiry.

1, 3,10 57 setup Warehousing io type by the system.6 setup Draws back the storehouse io type by the system.

101 , 111 setup Leaves the storehouse Io type by the system.200 setup adjust stock io type by the system



18/92



18

) Program Code * pdc_bas_loctype ) Program Description * Bas Loctype ) Function * querey , modify ) Parent Class * winbase1) Datebase Table * asr_bas_locsts ) Use Department * IT And correlation user partments) Use opportunity * When query system location status uses.) User Interface *

) Purpose * Setup an query for stock status.

) Field * All Column not input ,except type code , Location type description.

) Remark * The table data only supplies the inquiry, Needs to learn by heart.



19/92



19

) Program Code * pdc_bas_crnp ) Program Description * Bas Crnp) Function * query , modify ) Parent Class * winbase1) Datebase Table * asr_bas_crn ) Use Department * IT And correlation user partments) Use opportunity * when query or setup crane work status to uses.) User Interface *

) Purpose * Crane status by ASRS ONLINE system,update for crane work status.

) Field * All Column not input ,except Crane no , status.

) Remark * The table data only supplies the inquiry, "Basic File Setup ,- Crane data Setup And Status Query" can

query crane current working status for DP system.



20/92



20

) Program Code * pdc_bas_devp ) Program Description * Bas Devp) Function * query , modify ) Parent Class * winbase1) Datebase Table * asr_bas_dev ) Use Department * IT And correlation user Department) Use opportunity * setup or query can in,can out or current working status for device uses.) User Interface *

) Purpose * When needs to stop or to start may can in and can out for device uses, the device stand running status update

by the ONLINE system) Field explanation *

1. IN EN: pitch on express enable for in ,Otherwise, express not enable.2. OUT EN: pitch on express enable for out ,Otherwise, express not enable.3. Drum_type:on the current station for Drum type.4. id no,auto,load,can in,can out:expresstion the current station status,Provides it by the plc

system,Update for ONLINE system.) Remark *

1. does not new,delete,modify for device ! s data,otherwise , the system is unable the normal work.2. When the device appears abnormity,or when need to in/out of urgency,can stop in en/out en.But

don ! t forget to renew after The operation completes,otherwise,the device will be stop status all

along,do not execute in/out for work.

3. when device or crane do not normal to work, May through this Program inquiry standtion



21/92



21

Status,Judges whether is the device is hardware or software breakdown.Certainly also may

directly inquires the information in online or on the plc man-machine.

About Everyman, does not new,delete,modify for device no.



22/92



22

) Program Code * pdc_bas_plcerror ) Program Description * Bas Devp) Function * query , modify ) Parent Class * winbase1) Datebase Table * asr_bas_plcerror ) Use Department * IT And correlation user Department) Use opportunity * When inquiry system setup plc control detailed error code uses.) User Interface *

) Purpose * ASRS ONLINE in system running,If the plc control conveyor running is wrong, will return to this detailed

wrong code.) Field *

All Column not input, except Error Code , device error Desciption , Station , Error Type.) Remark *

About Everyman, does not new,delete,modify for mk



23/92



23

) Program Code * pdc_bas_crnerr ) Program Description * Bas Crnerr) Function * query , modify ) Parent Class * winbase1) Datebase Table * asr_bas_crn_error ) Use Department * IT And correlation user Department) Use opportunity * Query for crane error code setup by system.) User Interface *

) Purpose * ASRS ONLINE in system running,If the crane running newspaper is wrong, will return to this Crane error

code.) Field *

All Column not input, except Crane Error , Error Desciption.) Remark *

About Everyman, does not new,delete,modify for mk



24/92



24

) Program Code * pdc_locinit ) Program Description * Locinit ) Function * Process ) Parent Class * Form) Datebase Table * dw_asr_stkinit ) Use Department * WSIE) Use opportunity * When system initiation, carries on when the initialization to the ASRS location uses ) User Interface *

) Purpose * Produces the corresponding recording in asr_stk_mast and entrusts with loc_no, row, bay, col.

) Field * The bay, the row, the level may input.

) Operation Declaration * u Field explanation:

1. row:Must be bigger than 1 to be smaller than 42. bay:Must be bigger than 1 to be smaller than 443. level:Must be bigger than 1 to be smaller than 11If surpasses the above scope, the system can prompt the correlation wrong prompt information.

u Button explanation: 1, Initializtion:Chick this Button,

(1) , If works normally, produces the corresponding recording inasr_stk_mast and entrusts with loc_no, row, bay, col. Location number Location is: 2 Rows+3 Bay numbers

+2 levels

numbers, the location condition is O (empty storehouse).In executing state in button underneath as worthy of looking at as

storehouse standard initialization progress, after the initialization

completes demonstrates "UPDATE COMPLETE!".

(2) , If appears the abnormal phenomenon below, please refer to prompts and makes processing:n Prompt"ROW,BAY Or LEV can't empty!",The expression has not input the bay or the row, the level

value.n Prompt "Record already Exist,Can't initialize!",The expression has had and the input line, the row, the

level same record.n Prompt "UPDATE ERROR!",The expression initialization information inserts to the stock material

shows in asr_stk_mast to be defeated.



25/92


26/92



26

) Program Code * pdc_bas_wrklastno ) Program Description * Bas Wrklastno) Function * Query ) Parent Class * winbase1) Datebase Table * asr_bas_wrklastno) Use Department * IT department and correlation use department) Use opportunity * Inquires when the worfile ID production scope and the current id number uses ) User Interface *

) Purpose * DP, the update system produces when workfile ID uses .

) Field explanation * 1. Work Id Type: Fixed is 0, do not have to revise.2. Start No,End no: Entire workfile ID beginning and end value, after id arrives 9000, can recirculate by

1 starts.

3. Current Work No:Current system production biggest ID, next ID is this ID + 1.) Remark *

1. Cannot increase, delete this table equipment the recording and the name, otherwise possibly cancause the system to be unable the normal work.

Regarding the common user, does not permit the creation, deletes,modify mk



27/92



27

) Program Code * pdc_bas_rowlastno ) Program Description * Bas Rowlastno) Function * Query ) Parent Class * winbase1) Datebase Table * asr_bas_rowlastno) Use Department * IT department and correlation use department) Use opportunity * Inquires when location row assignment principle and condition which ASRS goes into storage

uses.) User Interface *

) Purpose * In ASRS DP, the Update system, goes into storage location row when the determination assigns the principle

and the current condition.) Field explanation *

1. Wrk Mk:Fixed is 1, do not have to revise.2. Whstype:ASR Type,Fixed is 0, do not have to revise.3. Crane Qty:Crane Quantity.4. Start Row,End Row: Corresponds the asrs system the steel frame beginning and end number.5. Current Row:Previous location of storage correspondence row,when production location, can act

according to the crane circulation,simultaneously the steel frame also circulates (location is O).

) Remark * 1. Cannot increase, delete this table the recording and the name,otherwise possibly can cause the

system to be unable the normal work.

Regarding the common user, does not permit the creation, deletes,modify mk,whs_type



28/92


29/92



29

used.Processi ng pl an: thi s st orage st and of storage st ate mast be possi bl e to use.

2 , Get l ocat i on, stat i on, and the f ormat i on of work f i l e error.n Prompt "I nsert i nto [ asr_wrk_mast ] Error!", Expressed the work shopkeeper f i l es

materi al i nf ormati on to makes a mi stake .Processi ng pl an: Exami nat i on work shopkeeper f i l es materi al i nf ormat i on.

n Prompt "I nsert i nto [ asr_wrk_det l ] Error!", Expressed the work f i l es detai l ed f i l esmateri al i nf ormati on to makes a mi stake .Processi ng pl an: Exami nat i on work f i l es detai l ed f i l es materi al i nf ormat i on.

n Prompt "Update Storage Fi l e Error!", When the update the st orage data i n storage statusf ai l ed.Processi ng pl an: Can check storage i nqui res l ocat i on i n the state i nf ormati on



30/92



30

) Program Code * pdc_empou ) Program Description * Empty Pallet Store Out) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_empl t_mast ) Use Department * Storage management department ) Use opportunity * when empty pallet retrieve uses) User Interface *

) Purpose * Generate empty pallet retrieve work file , make an appointment the corresponding location.

) Operati on Decl arati on * u Fi el d expl anati on

a. MK: Sel ecti on need retr i eve empty pal l et l ocat i on.b. Outbound st ati on: Choose empty pallet retrieve target station , 5, 15, 16, 30 or 31 stat i on.

u Start Button expl anati on . 1/, I f works normal l y, pl ease Bel ow ref er to the i nf ormat i on:

0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number andl ocat i on, Worki ng status f or 11(Ret ri eve) , ret r i eve/ store i n type for 110(Empty pal l etret r i eve operat i on) .

1, Update the storage st ate: The rel evant st orage data f i l es i n the storage status updat esf or R( ret ri eve Booki ng) .

. 2/, I f appears t he abnormal phenomenon, pl ease Bel owrefer to the i nf ormati on: 0, Prompt"Pl ease Sel ect A Retri eve Stat i on!", Express not selected empty retrieve station .

Processi ng pl an: sel ect ret r i eve stat i on.1, Prompt"Pl ease Ref resh Data Before Start !", Expre ss not data .

Processi ng pl an: Cl i ck the ref resh but ton, and then sel ect the data.2, Prompt"Pl ease Sel ect A Data Bef ore Start!", Expres s not data to start .

Processi ng pl an: Sel ecti on need ret r i eve empty pal l et l ocat i on.



31/92



31

) Program Code * pdc_check ) Program Description * Stock Check) Function * Processi ng ) Parent Class * Form) Datebase Table 3 dw_asr _check_mast ) Use Department * Storage management department ) Use opportunity * when Physical check uses) User Interface *

) Purpose * According to the ASRS storage,generate check retrieve work file , make an appointment the corresponding

location.) Operati on Decl arati on *

u Fi el d expl anati ona. MK: Sel ect i on need check l ocat i on.b. Outbound st ati on: Choose check source station , 15, 16, 30 or 31 stat i on.

u Start Button expl anati on . 1/, I f works normal l y, pl ease Bel ow ref er to the i nf ormat i on:

0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number andl ocat i on, Worki ng status f or 11(Ret ri eve) , ret r i eve/ store i n type f or 107(check ret ri eveoperat i on) .

1, Update the storage st ate: The rel evant st orage data f i l es i n the storage status updat es

f or P(Pi ck/Check/Combi ne Ret ri eve Booki ng).. 2/, I f appears t he abnormal phenomenon, pl ease Bel owrefer to the i nf ormati on:

0 , The crane err orn Prompt "The crane No. not conf orm, Check!", Expressed the crane error.

Processi ng pl an: check the crane.1 , Get l ocat i on, stat i on, and the f ormat i on of work f i l e error.

n Prompt "Check Ret ri eve Generati on Work Fi l e Error, Check!", Expressed the work fi l esf i l es materi al i nf ormat i on to makes a mi stake .Processi ng pl an: Check work f i l e i nf ormat i on.

n Prompt "Check Retri eve Generati on Work Detai l s Error, Check!", Expressed the work f i l esdetai l ed f i l es materi al i nf ormat i on to makes a mi stake .



32/92



32

Processi ng pl an: Check work detai l s f i l e i nf ormat i on.n Prompt "Update Locat i on St ate Rrror, Check!", When the update the storage data i n st orage

status fai l ed.Processi ng pl an: Can check storage i nqui res l ocat i on i n the state i nf ormati on

) Remark *

a. Thi s wi ndow operat i ons are r equi red t o cl i ck on t he t ool bar I nqui res the

l ocat i on i nf ormat i on but ton, Al so can be di rectl y i n the f i el d of i nput query condi t i onscl i ck Query Locat i onI nqui res the l ocat i on i nf ormat i on button.

b. When Onl i ne systemand conveyi ng systemnormal operati on, af ter t he st art wi l l create workf i l e, and f i l e the worki ng state of t he val ue i nto 12, the state of the correspondi ngl ocat i on number by F i nto P, and at the same ti me, crane l aunch at the fork take checkl ocat i on goods.

c. I f crane i n the process happens unusual , shoul d be based on crane anomal y code el i mi nate

abnormal . Usual l y el i mi nate abnormal af ter crane back to ori gi n, to swi tch to a computermodel can start (had better not manual goods sent to the l ocat i on) .



33/92



33

) Program Code * pdc_stor15 ) Program Description * Physical Store In By Manual) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_asr_st ore_f , dw_asr_st ore_g) Use Department * Storage management department ) Use opportunity * When Physical store in uses.) User Interface *

) Purpose * According to Pallet Bar extraction for stroe in information,generate store in work file, make an appointment

the corresponding location.) Operati on Decl arati on *

u Fi el d expl anati ona. Store I n Stat i on: 2, 15, 16, 30 or 31 stat i on.b. Pal l et Bar: enter the pal l et bar code to ext racti on store i n i nf ormat i on.

c. Other col umn: Do not i nput , through the "Ref resh" but ton di rect ext ract i on.u Refresh Button expl anati on:

The detai l ed st ore i n i nf ormat i on ext racti on.u Store In Start Button expl anati on:

Start store i n.. 1/, I f works normal l y, pl ease Bel ow ref er to the i nf ormat i on:

0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number andl ocat i on, Worki ng status f or 1(Store i n) , ret r i eve/ store i n type f or 1( store i n operat i on) .

1, Update the storage st ate: The rel evant st orage data f i l es i n the storage status updat esf or S(Store i n Booki ng) .

. 2/, I f appears t he abnormal phenomenon, pl ease Bel owrefer to the i nf ormati on:



34/92



34

0 , The materi al i nf ormat i on i s errorn Prompt "The same st ati on can not generate two works no i n the same ti me!", I ndi cated

goes i nto storage i n the work f i l es t o have the source st and to go i nto storage thestat i on number f or thi s and the acti ve status i s 1 .Processi ng pl an: Onl i ne work i n processi ng or The work f i l es mater i al i nf ormati on hasexcept i onal l y, user shoul d do i t by Actual si tuat i on.

1 , Get l ocat i on, stat i on, and the f ormat i on of work f i l e errorn Prompt "The Stati on Has Been Di sabl ed Storage!", Expressed the storage stand can not

be used.Processi ng pl an: thi s st orage st and of storage st ate mast be possi bl e to use.

n Prompt "The Stati on Detects No Loadi ng!", Expressed storage st ati on not havi ng anythi ng.Processi ng pl an: Thi s storage st ati on must have the thi ng condi t i on to be possi bl e touse.

n Prompt "The Stati on Detects Not Auto"Expressed st orage stati on i s not auto.

Processi ng pl an: Thi s st orage the automati c condi t i on whi ch stands f or i s when may use.2 , Get l ocat i on, stat i on, and the f ormat i on of work f i l e error.

n Prompt "Generate Work Fi l e Error!", Expressed the work f i l es f i l es materi al i nf ormat i onto makes a mi st ake .Processi ng pl an: Check work f i l e i nf ormat i on.

n Prompt "Generate Work Detai l s Error!", Expressed the work f i l es detai l ed f i l es materi ali nf ormati on to makes a mi st ake .Processi ng pl an: Check work detai l s f i l e i nf ormat i on.

n Prompt "Updata ERP Wai t For Store I n Error", Expressed the wai t f i l es f i l es materi ali nf ormati on to makes a mi st ake .Processi ng pl an: Check wai t f i l e i nf ormat i on.

n Prompt "Updata l ocat i on Fi l e Error!", When the update the st orage data i n storage st atusf ai l ed.Processi ng pl an: Can check storage i nqui res l ocat i on i n the state i nf ormati on

u QC Qui t Button expl anati on: When qui t wi l l use thi s but ton.

) Remark * The store in former must refresh out the detailed information to the start.



35/92



35

) Program Code * pdc_retrievebymanu ) Program Description * Physical Store Out By Manual) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_asr_r etri eve_mast_m, dw_asr_r etri eve_mast_d, dw_asr_r etri eve_mast _g) Use Department * Storage management department ) Use opportunity * When Physical retrieve uses.) User Interface *

) Purpose * According to select location information for extraction retrieve information,generate retrieve work file, make

an appointment the corresponding location.) Operati on Decl arati on *

u Fi el d expl anati ona. Retri eve Stat i on: 2, 15, 16, 30 or 31 stat i on.b. Other col umn: Do not i nput , through the "Query" but ton t ransf er data.

u Retri eve Button expl anati on . 1/, I f works normal l y, pl ease Bel ow ref er to the i nf ormat i on:

0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number andl ocat i on, Worki ng status f or 11(Ret ri eve) , ret r i eve/ store i n type f or 101 or 103( retri eveor pi cki ng ret r i eve operat i on) .

1, Update the storage st ate: The rel evant st orage data f i l es i n the storage status updat esf or P or R(Pi ck Retri eve Booki ng Or Ret r i eve Booki ng ) .

. 2/, I f appears t he abnormal phenomenon, pl ease Bel owrefer to the i nf ormati on: 0 , Get l ocat i on, stat i on, and the f ormat i on of work f i l e error.

n Prompt "Retri eve Generate Work Fi l e Error, The SystemWi l l Ski p, Cont i nue To The NextOne!", Expressed the work f i l es f i l es materi al i nf ormat i on to makes a mi stake .



36/92



36

Processi ng pl an: Check work f i l e i nf ormat i on.n Prompt "Retri eve Generate Work Detai l Error , The SystemWi l l Ski p, Cont i nue To The Next

One!", Expressed the work f i l es detai l ed f i l es materi al i nf ormat i on to makes a mi stake .Processi ng pl an: Check work detai l s f i l e i nf ormat i on.

n Prompt "Generate wai t detai l Fi l e Error!", Expressed the wai t detai l f i l es materi ali nf ormati on to makes a mi st ake .Processi ng pl an: Check wai t detai l f i l e i nf ormat i on.

n Prompt "Retri eve Generate wai t Fi l e Error, The SystemWi l l Ski p, Cont i nue To The NextOne!", Expressed the wai t f i l es f i l es materi al i nf ormat i on to makes a mi stake .Processi ng pl an: Check wai t f i l e i nf ormat i on.

n Prompt "Update Locat i on Status Error, The SystemWi l l Ski p, Cont i nue To The NextOne!", When the update the storage dat a i n storage status f ai l ed.Processi ng pl an: Can check storage i nqui res l ocat i on i n the state i nf ormati on

u Button expl anati on Del ete a data.

u Query Button expl anati on Ret ri eve i nf ormat i on must be through the query but ton extract i on ret r i eve materi al .Cl i ck the show Wi ndows, as shown i n f i gure

l Fi el d expl anati ona. MK: Sel ect i on need ret r i eve l ocat i on.b. MK1: Sel ecti on need ret r i eve pal l et bar code. Sel ect the same l ocati on of al l



37/92



37

i nf ormat i on, express f ul l ret ri eve. No check al l the same l ocat i on al l , expresspi ck ret i reve,

l Confi rmButton expl anati onCl i ck on the but ton af ter transf er r et r i eve/ pi ck ret r i eve i nf ormat i on di spl ay toret i reve wi ndow.



38/92



38

) Program Code * pdc_locforbit ) Program Description * Stock Forbit) Function * Processi ng ) Parent Class * Form) Datebase Table * ) Use Department * Storage management department ) Use opportunity * When adjuct the location state uses) User Interface *

) Purpose * Setup an query for stock status.


1. Locat i on: I nput needs t o adj ust the l ocat i on number.2. Need To Adj ust The State: Sel ect the desi red l ocat i on st ate.

u Button expl anati on: Change the state of l ocat i on f or the sel ected state.

) Remark *

Please make sure the location number after adjustment.



39/92



39

) Program Code * pdc_maintain ) Program Description * Maintenance ) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_asr_mai ntai n_mast ) Use Department * Storage management department ) Use opportunity * When maintain uses.) User Interface *

) Purpose * Display is dealing with the retrieve station information.

) Operati on Decl arati on * u Refresh Button expl anati on

Ref resh af ter show al l col umn i s the number of processi ng.

u Fi el d expl anati on

Doubl e cl i ck on the stati on name that wi l l di spl ay the correspondi ng retr i eve i nf ormat i on.



40/92



40

) Program Code * pdc_restore ) Program Description * Restore) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_asr_agai n_mast_f , dw_asr _agai n_mast_g) Use Department * Storage management department ) Use opportunity * When pick/check/combin restore uses) User Interface *

) Purpose * According to restore station refresh generation check/combin/pick restore,generate check/combin/pick restore

work file, make an appointment the corresponding location,delect check/combin/pick retrieve information to work log

file.


c. Retri eve Stat i on: 2, 15, 16, 30 or 31 stat i on.d. Other col umn: Do not i nput , through the "ref resh" but ton transf er data.

u Refresh Button expl anati on: According to the selected station work number, to work file grab retrieve information .

u Start Button expl anati on:

. 1/, I f works normal l y, pl ease Bel ow ref er to the i nf ormat i on: 0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number and

a. The generated work f i l e materi al : Af ter the success of a di spl ay work I D number and



41/92


42/92



42

) Program Code * pdc_stkadj_mast ) Program Description * StkAdjustment) Function * Processi ng ) Parent Class * Form) Datebase Table * asr_l ocadj _mast , asr_l ocadj _det l 4 Use Department * Storage management department ) Use opportunity * When adjuct the storage information uses.) User Interface *

) Purpose * According to the location number, to adjust storage information.


a. Locat i on: I nput needs to adj ust the l ocat i on number, Press enter key extracti on l ocat i onmateri al .

b. Other col umn: Do not i nput , Through the i nput l ocat i on, press t he return key to get .u Adjustment Button expl anati on

0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number anda. Update the st orage:Wi l l amend the good st orage data save to storage fi l e.b. The generated wai t f i l e materi al : type f or 7, Take Mk f or Y, Erp Mk f or N.

. 2/, I f appears t he abnormal phenomenon, pl ease Bel owrefer to the i nf ormati on: a. Prompt"Pl ease Correctl y Enter The Locati on Number! ", Express Location error .



43/92



43

Processi ng pl an: check the correct l y l ocat i on number.b. Prompt"The Locat i on I s No Storage Data!", Express l ocat i on f i l e not data.

Processi ng pl an: Cl i ck the l ocat i on f i l e.



44/92



44

) Program Code * pdc_stor1515 ) Program Description * Physical Store In By Manual 2) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_asr_store_manual _f , dw_asr_store_manual _g ) Use Department * Storage management department ) Use opportunity * When physical store in by manual uses.) User Interface *

) Purpose * Manual input the store in information,generate store in work file, make an appointment the corresponding

location.) Operati on Decl arati on *

u Fi el d expl anati ona. Store I n Stat i on: 2, 15, 16, 30 or 31 stat i on.b. Type: Do not i nput , Open t he wi ndow to be automat i c generati on.c. Other col umn: User i nput .

u Store In Start Button expl anati on:. 1/, I f works normal l y, pl ease Bel ow ref er to the i nf ormat i on:

0, The generated work f i l e materi al : Af ter the success of a di spl ay work I D number andl ocat i on, Worki ng status f or 11(Ret ri eve) , ret r i eve/ store i n type f or 101 or 103( retri eveor pi cki ng ret r i eve operat i on) .



45/92


46/92



46

) Program Code * pdc_locmove ) Program Description * Location Move) Function * Processi ng ) Parent Class * Form) Datebase Table * dw_pdc_st k_mast_g11, dw_pdc_st k_mast_g21,dw_l ocquery_g1, dw_l ocquery_g) Use Department * Storage management department ) Use opportunity * When one location move to another location uses.) User Interface *

) Purpose * Put a location move to another empty location,generate store in work file, make an appointment the

corresponding location.) Operati on Decl arati on *

u Materi al extracti onWhen the manual i nput correspondence storage sheet , cl i ck thi s but ton,

u Fi el d expl anati ona. Source Locat i on No: User i nput .b. Locat i on No: User i nput .

c. Locati on No: Do not i nput , through the but ton generate data.

u Button expl anati on:



47/92



47

1) Source l ocat i on no but ton:

Cl i ck on the but ton as shown bel ow the wi ndow

a) MK: Sel ecti on need transf er l ocat i on. ( l oc sts i s F or D)b) Other col umn: Do not i nput , through the "Query" but ton query data.l Sel ect Button expl anati on:

Transf er the sel ected l ocat i on i nf ormat i on, di spl ayed i n t he Location Move wi ndow.

2) Locat i on no but ton:

Cl i ck on the but ton as shown bel ow the wi ndow

i . MK: Choose to need to transf er to whi ch l ocat i on( l oc st s i s O) .i i . Other col umn: Do not i nput , through the "Query" but ton query data.l Sel ect Button expl anati on:

Transf er the sel ected l ocat i on i nf ormat i on, di spl ayed i n t he Location Move wi ndow.u Transfer Button expl anati on:



48/92


49/92



49

3.3 ASRS STOCK) ProgramCode * pdc_stkf i l e ) ProgramDescri pti on * Locat i on Query) Functi on * Query ) Parent Cl ass * wi nbase2) Datebase Tabl e * dw_asr_l oc_mast_g,dw_asr_l oc_det l _g) Use Department * Warehouse management department and rel ated department) Correl ati ve Program * Work Fi l e Query And Mai ntenance , Stati on Data Setup and Status Query ,

Crane Data Setup And Status Query) Use opportuni ty * Accordi ng to the st orehouse l ocat i on, the warehouse Locati on code number, the

st orehouse l ocat i on condi ti on and so on i nqui re ti me the ASRS stock materi al uses ) User Interface *

) Purpose * ASRS each storehouse l ocat i on newest condi t i on and materi al .

) Operati on Decl arati on * u May showthe tabl e body and tabl e head vari ous fences posi ti on to carry on the combi nati on

i nqui ry.u Tabl e head:Mai n demonst rati on st orehouse l ocati on number, warehouse code number, st orehouse l ocat i on



50/92



50

condi t i on, materi al s and so on crane seri al number, l i ne, row, l evel .u Tabl e body:Correspondi ng tabl e current recordi ng materi al , i f the tabl e head storehouse l ocat i on condi t i oni s O, The D, S tabl e body wi l l not al l have the materi al ; I f the tabl e head storehouse l ocat i oncondi t i on i s R, P, F, Q, The tabl e body wi l l demonst rate i n thi s storehouse l ocat i on materi al .

) Remark * 1. Thi s wi ndow onl y can carry on t he i nqui ry f unct i on, i ts edi t i on r evi si on f uncti on onl y

suppl i es when the wi se test uses, i f the stock materi al i s not correct, Must procedure carryon processi ng through ASRS Auto Warehouse t he Aj ustment .

2. When the crane or the conveyor i s unusual , the correspondi ng storehouse l ocat i on condi t i onhas t he possi bi l i ty to be unusual , must act accordi ng to certai n pri nci pl e, procedurecarri es on processi ng through ASRS Stock Adj ust the Ent ry.



51/92



51

3.4 WAIT FOR ASRS PROCESS DATA) ProgramCode * pdc_wai t f i l e) ProgramDescri pti on * Wai t Query) Functi on * query , Addi t i on ) Parent Cl ass * wi nbase2) Datebase Tabl e * dw_asr _wai t_masp, dw_asr_wai t_detp) Use Department * Warehouse management depar tment , I T department and rel ated department) Correl ati ve Program * Wai t For ASRS Process Data Log Query , Asr s Stock Query , Work Fi l e Query

And Mai ntenance) Use opportuni ty * I nqui res when the ERP i ssui ng processi ng not i ce f i l es materi al uses,When WI SE

test order i ncreases i nf orms i nto/ Publ i shes when the storehouse materi al uses) User Interface *

u Tabl e head: the demonstrat i on wai t i ng processi ng f i l es basi c i nf ormat i on.u t abl e body: Correspondi ng wai t i ng processi ng f i l es detai l ed materi al .

) Purpose * And reads i n among through the repayment procedure f romthe erp wai t i ng processi ng f i l es

extract i on materi al , Provi des i nto/ Leaves the warehouse , i nventoryi ng , the merge , sorts themateri al , storehouse l ocat i on shi f t i ng , the st orehousel ocat i on adj ustment materi al exami nat i on.



52/92


53/92



53

) ProgramCode * pdc_wai t f i l el og ) ProgramDescri pti on * Wai t LogQuery) Functi on * query ) Parent Cl ass * wi nbase2) Datebase Tabl e * dw_asr_wai t_masp_l og, dw_asr_wai t_detp_l og) Use Department * Warehouse management depar tment , I T department and rel ated department) Correl ati ve Program * Wai t For ASRS Process Data Query And Mai ntenance) Use opportuni ty * Inqui ry compl etes wai t i ng processi ng f i l es materi al ) User Interface *

u Tabl e head: Wai t i ng l og processi ng f i l es basi c i nf ormat i on.u Tabl e body: Wai t i ng l og processi ng f i l es detai l ed materi al .

) Purpose * ASRS after wai ted f or i n the processi ng f i l es the data processi ng compl etes changes over to

thi s wi ndow, conveni ence i nqui ry.) Remark *

Thi s wi ndow onl y provi des the i nqui ry.



54/92



54

3.5 WORK FILE) ProgramCode * pdc_wrkfi l e ) ProgramDescri pti on * WorkQuery ) Functi on * query , processi ng ) Parent Cl ass * wi nbase2) Datebase Tabl e * dw_asr _wrk_mast_g, dw_asr_wrk_det l _g) Use Department * Warehouse management depar tment , I T department and rel ated department) Correl ati ve Program * Work Fi l e Log Query , Asrs Stock Query , Stati on data Setup and Status Query ,

Crane data Setup And Status Query) Use opportuni ty * I nqui ry/ Processes ASRS and the conveyor each ki nd of act i ve status .) User Interface *

u Tabl e head: work no, t i me, status, i o type , storehouse l ocat i on, Stands and so on thei nf ormat i ons.

u Tabl e body: work no detai l ed materi al i nf ormat i on.) Purpose *

When ASRS storehouse l ocat i on materi al change, produces work no and the rel ated i nf ormati oni n t hi s wi ndow. Dp , onl i ne , Repays carri es on processi ng to the work no materi al .

) Operati on Decl arati on * n Radi oButton Declarati on : The work f i l es set scope whi ch mai nl y i s provi des when i nqui ry



55/92



55

seesu Al l : Al l materi al i nf ormat i on.u On Hol d: Work Status i s 1 or i s 11 val ue materi al s.u Runni ng: 1


56/92



56

10. duo_date: Duo date.11. work_order: Work order number.12. f i rst_date: The f i rst generati on of t i me.n Button expl anati on:

u Compl ete:When the crane ei ther the computer systemor the conveyor are unusual , af ter l eaves goes i nto

st orage and so on the work compl etes when thi s i d condi t i on i s unabl e normal l y to compl ete, mustthrough art i f i ci al l y carry out thi s button to termi nate. Af ter carri es out thi s order, thi s workf i l es record can compl ete, and renewal correspondi ng st orehouse posi t i on condi ti on, theref ore,certai nl y must be caref ul , when necessi ty, must carry on stock i nventoryi ng.

When chooses some work the no correspondence the record, cl i cks on the but ton , Af ter thedetermi nat i on the syst emcan renewthe work f i l es: Work the Status r enewal i s 4, Work Status 10 condi t i on renewal i s 14, Fi ni sh Type i s B, Remarkmateri al i s Fi ni sh By+Operator + Fi ni shoperat i ng t i me. S shi f ts through the repayment systemt hi s work fi l es materi al to the work hi storyf i l es, Si mul taneousl y renew the automati c warehouse stock and the stock

status. The systemal so possi bl y can prompt " The Locat i on: Al ready Occupi ed! ", Expressed the goal

st orehouse posi t i on has made an appoi ntment takes, cannot compl ete the correspondi ng compl etedwork.

u Cancel :When the crane ei ther the computer syst emor the conveyor are unusual , Must through

art i f i ci al l y carry out thi s but ton to carry on cancel . Af ter carri es out thi s order, thi s workf i l es r ecordi ng shi f t s t o the work hi story backup f i l es, and renewal correspondi ng storehouseposi t i on condi t i on, I f si mul taneousl y i s goes i nto storage, but al so must cancel erp i nf ormat i onand so on st ock appoi ntment . Therefore, certai nl y must be careful , when necessi ty, must carryon stock i nventoryi ng.

When chooses some work no correspondence the record, cl i cks on the but ton, The syst emcan j udge whether wi th ERP connecti on, i f has not connected, the systemwi l l be unabl e t o carry onCancel , Otherwi se, the systemcan prompt "Are you sure you have deal t wi th the error of thi s data, Torestore Retry the operat i on of thi s data?", Af ter the determi nat i on the systemcan renewthe workf i l es, mai n processi ng : when work Status10and


57/92


58/92



58

) ProgramCode * pdc_wrkfi l el og ) ProgramDescri pti on * WorkLogQuery) Functi on * query ) Parent Cl ass * wi nbase2) Datebase Tabl e * dw_asr_wrk_mast_l og_g, dw_asr_wrk_det l _l og_g) Use Department * Warehouse management depar tment , I T department and rel ated department) Correl ati ve Program * Work Fi l e Query And Mai ntenance , Asr s Stock Query) Use opportuni ty * I nqui res asrs al ready work no and the correl ati on data whi ch processes ) User Interface *

u Tabl e head : work no, t i me, status, i o type , Storehouse posi t i on, Stands and so on thei nf ormat i ons.

u Tabl e body: Corresponds work no the detai l ed materi al i nf ormat i on.) Purpose *

When ASRS warehousi ng/ Af ter l eaves t he storehouse to compl ete, update syst emwi l l be abl eautomat i c to correspond the work no materi al wi l l move here the f i l es, I f i n Work Fi l e QueryAnd Mai ntenance art i f i ci al f i ni sh, cancel , move, al so can move here the f i l es the materi al .

) Operati on Decl arati on * n Tabl e Head Field expl anati onu Work no: Work I D, between 1 ~9000, automati cal l y produces by the system, Obj ect moves whi ch

i n ASRS and on the peri pheral equi pment , al l ent rust s wi th i d and i s connected/ goes i nto



59/92


60/92



60

3.6 REPORT && ANALYSIS) Program Code * pdc_stk_usests ) Program Description * StkUsests Report) Function * Inquiry ) Parent Class * winbase1) Datebase Table * dwrp_asr_stk_usests ) Use Department * Warehouse management department) Use opportunity * When inquires each row and the entire warehouse service condition uses) User Interface *

) Purpose * Inquires each row and the entire warehouse service condition

4 Operation Declaration 3

) Remark * In the window recording is defers to marches forward the line to compile.

Total: total locations

Full: boxes of loading Null:empty location quantity

Forbid:location of system prohibit

Empty:empty boxes

Using:storaging,retrieving

Full rate:full/total



61/92



61

) Program Code * pdc_stkuse ) Program Description * Stkuse Report) Function * Query ) Parent Class * Form) Datebase Table * dwrp_loc_mast_f,dwrg_loc_mast ) Use Department * Warehouse manage department) Use opportunity * With the graphic mode demonstrated when location use condition uses. ) User Interface *

) Purpose * With the graphic mode demonstrated when location use condition uses.

) Remark * In the window the left side grid demonstration is the location condition series estimates the value Right side

is with the graphic mode demonstration data, clicks on Graph the Type button,may choose the graph type,

single-clicks Confirm, will defer to the selection the graphical display.



62/92



62

) Program Code * pdc_stkusemap ) Program Description * Stkusemap Report) Function * Query ) Parent Class * Form) Datebase Table * dw_stkusests,dw_stk_used_g1,dw_asr_stkuse1) Use Department * Warehouse manage department) Use opportunity * Inquires the asrs storehouse position stock condition and the minute when step uses, by

direct-viewing way demonstration.) User Interface *

) Operation Declaration * u Field explanation

1. Row:According to Row which elects decided hangs the vehicle number,chooses 1 or 2, is crane 1; 3 or 4, iscrane 2; 5 or 6, is crane 3 5

2. Crane: According to the Crane number which elects demonstrated chooses the location conditioninformation which the crane is at.

3. Location Status : F-Storage,O-Empty,R-Reserve,S-Reserve,X-Forbid, D-Empty Plt, P-Picking,Q-Restore

u Button explanation1. Refresh:May renews through this button the picture and the data for the newest condition.2. By Condition Query:Will demonstrate the stock detailed inquiry window, the input needs to inquire

condition Show Result In Grid, merely demonstrated in the stock window; Show Result In Draw, can

demonstrate in chart Gerry,color for blue color. Cancel button: Closure stock detailed inquiry window.

3. Print Report:print location stock Status diagram.) Remark *

1, Will single-click in the window the free position, demonstrated corresponding the location number, cranenumber.



63/92



63

2, Double-clicks the storehouse standard, may demonstrate Location Detail Information window, includingLocation, Sheet No, Product Code, Qty and so on field material.


PLATZ ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL.pdf

Documents

Transcript of PLATZ ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL.pdf