plasma welding

download plasma welding

of 12

description

welding of 304 and 316L stainless steel using plasma ac welding

Transcript of plasma welding

First Review on Corrosion studies on Dissimilar welded joint of SS-304 & SS-316 using PAW and TIG

First Review on

Corrosion studies on Dissimilar welded joint of SS-304 & SS-316L using PAW and TIG WeldingPresented by: Name:Mukesh KumarM.Tech.:Welding EngineeringDept.: MMERoll No:212114014

Project Guide:Dr. S. Natarajan

Project Co Guide:Dr. S.P. Kumaresh Babu

DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERINGNATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI.IntroductionStainless steels are widely used in the form of tubes for boiler fabrications. (specially 304, 316L)

A typical boiler consist of a number of dissimilar metal weld joints.

These joints are subjected to high temperature, at which degradation of metal takes place because of hot corrosion.

ObjectiveTo determine hot corrosion effects on dissimilar weld joint of SS-304 and SS-316 welded using TIG welding (Without filler wire, with 304 filler & with 316 filler wire)

Hot corrosion effects on dissimilar weld joint of SS-304L and SS-316 welded using Plasma arc welding.

Comparing results of both the welding processes.Plasma and TIG welding

Work Plan:ProjectLiterature SurveyMaterial PrecurementSS 304

SS 316 LSample Preparation100 mm2.5 mm50 mmWelding TIG WeldingPlasma Arc WeldingMechanical TestingsTensile Test

Hardness TestCorrosion TestsHot Corrosion StudiesResult & analysisTime ScheduleDescription

Duration in weeks

JulyAugustSeptemberOctoberNovember12341234123412341234Literature Survey5Procurement of Material2Sample Preparation1Welding of SamplesTig Welding2Plasma Welding3Mechanical Testing2Corrosion Tests4Result & Analysis4Thesis preparation

Progress ReportMaterial procurement & Sample PreparationBoth SS 304 and SS 316L sheets of 2.5 mm thickness purchased from Mahalaxmi metals, Chennai. Dimension- 300 X 300 mm.

15 + 15 samples each of size 100 X 50 mm were cut out from sheet metal using a 10 Tons shear cutting machine.TIG welding (without filler wire)Welding parameters: Sheet Thickness2.5 mm Welding Current Electrode Elecrode Dia. Sheilding Gas

What next-TIG welding using SS 304 filler wire.

TIG welding using SS 316 filler wire.

Obtaining optimum parameter on Plasma arc welding.

Microstructural Analysis

Mechanical testing

Hot Corrosion testingThank You