Place decap
-
Upload
vlsi-system-design -
Category
Education
-
view
716 -
download
1
description
Transcript of Place decap
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
It is attained by following steps:
• Partition and synthesize larger designs into smaller modules consisting of IP’s and std cells
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
It is attained by following steps:
• Define width and Height of ‘core’ and ‘Die’ using the physical area of synthesized netlist, utilization factor and aspect ratio
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
It is attained by following steps:
• Define locations of pre-placed cells
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
It is attained by following steps:
• Place de-coupling capacitors surrounding pre-placed cells
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
It is attained by following steps:
• Power Planning
Floorplanning is basically the arrangement of logical blocks (i.e. multiplexer, AND, OR gates, buffers) on silicon chip.
It is attained by following steps:
• IO Pin/Pad placement
• We have defined the Width and Height of the core.
• Also defined the locations of pre-placed cells
Block a Block b
Block c
Core
Die
Pre-placedCells
W
H
• We have defined the Width and Height of the core.
• Also defined the locations of pre-placed cells
• We need to encapsulate the Pre-placed Cells by Decoupling capacitor .
04/12/2023 11
• A decoupling capacitor is used to decouple the pre-placed cells from main power supply, in order to protect the cells from the disturbance occurring in the power distribution lines and source
• The purpose of using decoupling capacitors is to deliver required current to the gates during switching
Decoupling capacitor encapsulate the Pre-placed Cells
Block a Block b
Block c
Core
Die
Pre-placedCells
DECAP1
Block a Block b
Block c
Core
Die
Pre-placedCells DECAP2
DECAP1
Block a Block b
Block c
Core
Die
Pre-placedCells DECAP2
DECAP1
DECAP3
Block a Block b
Block c
Core
Die
Pre-placedCells DECAP2
DECAP1D4
DECAP3