PILOT PEX Exterior/Pilot PEX...® products are tested to IES LM-79 standards DMX DISTRIBUTION &...
5
PILOT PEX HIGH PERFORMANCE EXTERIOR COVE AND GRAZE LIGHTING
Transcript of PILOT PEX Exterior/Pilot PEX...® products are tested to IES LM-79 standards DMX DISTRIBUTION &...
PILOT PEXHIGH PERFORMANCE
EXTER IOR COVE AND GRAZE L IGHTING
Ex te r io r Cove and Graze L ight ing
AC P lug and P lay Ins ta l la t ion
Un iversa l In tegra l Power Supply
Ava i lab le in 2 Leng ths : 12" and 48"
4W/FT, 7W/FT and 10W/f t
27K, 30K, 35K, 40K
RGBW Color Changing (12W/f t )
ETL & cETL Approved fo r Wet Locat ions
IP67 Ra t ing For Ex t reme Outdoor Env i ronments
P I LOT PEXHIGH PERFORMANCE
EXTER IOR COVE AND GRAZE L IGHTING
PILOT PEX PILOT PEX
PREFIX WATTAGEWATTS/FT
C.C.T. OPTICS MOUNTING FIXTURE LENGTH
VOLTAGE CONTROLS FINISH OPTIONS
STAT IC WHITE L IGHT
PEX
PILOT EXTERIOR
SERIES
4
7
10
27K = 30K =35K =40K =
2700K3000K3500K4000K
10X10 =10X30 =10X60 =15X15 =15X30 =15X60 = 30X30 =30X60 =60X60 =
100X100 =ASY =
10°X10°10°X30°10°X60°15°X15°15°X30°15°X60°30°X30°30°X60°60°X60°100°X100°ASYMMETRIC
SM = Surface
EXA = Extended Arm
12"
48"
UNV = 110V-277 VAC
DIM =
DMXDIM =
DMXFX =
DMXFT =
0-10V Dimming is standard, 110V - 277VAC
DMX, Dimming, 110V - 277VAC
DMX Fixture Resolution, 110V - 277VAC For RGBWd and Active White products
DMX Foot by Foot Resolution, 110V - 277VAC For RGBWd and Active White products
MG = Metallic Gray HCRI =
LV =
High CRI 90+For white light
Louver
12 RGBWd =
AWH =
RGBW discrete color changing
Active white, kelvin tunable 27K-65K
10X10 =10X30 =10X60 =15X15 =15X30 =15X60 = 30X30 =30X60 =60X60 =
100X100 =ASY =
10°X10°10°X30°10°X60°15°X15°15°X30°15°X60°30°X30°30°X60°60°X60°100°X100°ASYMMETRIC
NOTES
All Color Changing and Active White products require a DMX programmer for proper mixing. Must order separately.
One LPT tool is required for field re-addressing of factory DMX settings. See below.
An AC Leader Cable is required with each
fixture run for connection from first fixture to the
j-box. See below.
DMXFX and DMXFT ship as System Control
O U T PU T 4W/F T, 7 W/F T, 10 W/F T, 12W/F T
OPTICS
10° X 10° 15° X 60°
30° X 30° 30° X 60° 60° X 60° ASYMMETRIC
10° X 30° 10° X 60° 15° X 15° 15° X 30°
COLOR TEMPERATURES 2700K, 3000K, 3500K, 4000KRGBW COLOR CHANGING, ACTIVE WHITE
CRI 82+ (standard), 90+ (optional)
LUMENS & EFFICACY (LM/W) 4' - WHITE LIGHT, 82CRI
WATTAGE CCT OPTICS LUMENS EFFICACY
7 W/ft10 W/ft
7 W/ft10 W/ft
7 W/ft10 W/ft
7 W/ft10 W/ft
2700K2700K
3000K3000K
3500K3500K
4000K4000K
10°X60°10°X60°
10°X60°10°X60°
10°X60°10°X60°
10°X60°10°X60°
18972740
21083044
21293074
39293196
74.2 lm/W73.4 lm/W
82.4 lm/W81.6 lm/W
83.2 lm/W82.4 lm/W
79.6 lm/W85.7 lm/W
LUMEN MAINTENANCE 75,000 hrs L70
ELECTRICAL INPUT VOLTAGE Line Voltage, 0-10V - 110V - 277V
TOTAL POWER *CONSUMPTION
FIXTURE WATTAGE 4.0 W/ft7.0 W/ft
10.0 W/ft 12.0 W/ft
TOTAL POWER CONSUMPTION4.0 W7.0 W
10.0 W12.0 W
CONTROLS Standard: Flicker free dimmable to 3%. 0-10V dimming is standard (Sink). *Optional: DMX Dimming (Foot-by-Foot or Fixture control)
* Controls equipment may have impact on low level dimming.
PHYSICAL
DIMENSIONS(HEIGHT X WIDTH)
With Tempered Glass Lens @ 0° rotation: 2-1/2" X 1-3/4" X 12" or 48"
HOUSING Anodized metallic aluminum extrusion with molded black powder-coated end caps
Standard Tempered Clear Glass LensLENS
OPERATING TEMPERATURES -25° C to 50° C
CERTIFICATION CERTIFICATION ETL Listed for Wet Location (IP67)
WARRANTYRoHSCOMPLIANT
5 Year Limited
Warranty
5 Year Limited
All PILOT® products are tested to IES LM-79 standards
DMX DISTRIBUTION & PROGRAMMING KIT - REQUIRED DMX DIMMING, COLOR CHANGING AND ACTIVE WHITE
CATALOG NUMBER DESCRIPTION
LPT DMX PROGRAMMING TOOL: One LPT is required for field re-addressing of factory DMX settings.
CDS-A DMX DISTRIBUTION KIT ONLY DRY LOCATION(4 OUTPUTS): CDS-A consists of four outputs. Each output accommodates up to 32 fixtures per data feed. Four terminators aincluded for use as required.
CDS-A-WET WET LOCATION DMX DISTRIBUTION KIT ONLY 4 OUTPUTS): CDS-A consists of four outputs. Each output accommodates up to 32 fixtures per data feed. Four terminators aincluded for use as required.
LEADER CABLES
• An AC Leader Cable is required with each fixture run for connection from first fixture to the j-box.
CATALOG NUMBER DESCRIPTION
ACLM-10-B 10' BLACK LEADER CABLE - For line voltage only, REQUIRED for connection at the start of each run
JUMPER CABLES
• PILOT EXTERIOR allows for end-to-end fixture connection without additional AC jumpers. If fixtures are not mounted in an end-to-end continuous manner, AC jumpers are required.
CATALOG NUMBER DESCRIPTION
ACJM-2-B 2' BLACK JUMPER CABLE
ACJM-5-B 5' BLACK JUMPER CABLE
ACJM-10-B 10' BLACK JUMPER CABLE
ACJM-25-B 25' BLACK JUMPER CABLE
PILOT PEX PILOT PEX
Fixture Wattage (W/Ft) 120VAC 277VAC
4W 100 feet 200 feet
7W 100 feet 200 feet
10W 70 feet 125 feet
12W 48 feet 96 feet
WIRING
MAXIMUM RUN LENGTHS
SM - SURFACE MOUNT
DIM - ‘B’
DIM - ‘A’
1-1/8”
1-3/4”
2-1/2”
DIM - ‘B’
SPECIFYMIN 5”
MAX 24”
DIM - ‘A’
MOUNTING DETAIL
1-3/4”
2”
2”2”
Ø2-1/2”
7/8”
± 95°
± 95°
EXA - EXTENDED ARM MOUNT
Fixture Length DIM-'A' DIM-'B'
12" 12" 8-7/16"
48" 48" 32-5/8"
Fixture Length DIM-'A' DIM-'B'
12" 12" 8-7/16"
48" 48" 32-5/8"
DIM - ‘B’
DIM - ‘A’
1-1/8”
1-3/4”
2-1/2”
DIM - ‘B’
SPECIFYMIN 5”
MAX 24”
DIM - ‘A’
MOUNTING DETAIL
1-3/4”
2”
2”2”
Ø2-1/2”
7/8”
± 95°
± 95°
T681X series Installation Guide
™
/ General Luminaire LTD Minhang District Shanghai, China www.gL-Lighting.com
INstallation: section c
NOTE:Read these instructions before using product.Lisez les instructions avant d’utiliser ce produit.
!
5
WiringCables
Specifications are typical values and may change without notification. May not be exactly as show.GL, Chameleon Systems and related graphics are trademarks of General Luminaire LTD.
NON/TRIAC DIMMING
LEADER CABLELINE NEUTRAL GROUND
white
white green
green
black
black
0-10V DIMMING
LINE NEUTRAL GROUND DATA - DATA +
white
white green
orange redgreen
black
black
WARNING!
DISCONNECT POWER BEFORE INSTALLING ORSERVICING TO AVOID ELECTRICAL SHOCK.
POWER CABLE SHOULD NOT SUPPORTWEIGHT OF FIXTURE: LEAVE LOOSE
WARNING!
LEADER CABLE
DMX CONTROL
LINE NEUTRAL GROUND DATA - DATA +
white
white green
orange redgreen
black
black
LEADER CABLE
black
orangeor
black
redor
white
T681X series Installation Guide
™
/ General Luminaire LTD Minhang District Shanghai, China www.gL-Lighting.com
INstallation: section c
NOTE:Read these instructions before using product.Lisez les instructions avant d’utiliser ce produit.
!
5
WiringCables
Specifications are typical values and may change without notification. May not be exactly as show.GL, Chameleon Systems and related graphics are trademarks of General Luminaire LTD.
NON/TRIAC DIMMING
LEADER CABLELINE NEUTRAL GROUND
white
white green
green
black
black
0-10V DIMMING
LINE NEUTRAL GROUND DATA - DATA +
white
white green
orange redgreen
black
black
WARNING!
DISCONNECT POWER BEFORE INSTALLING ORSERVICING TO AVOID ELECTRICAL SHOCK.
POWER CABLE SHOULD NOT SUPPORTWEIGHT OF FIXTURE: LEAVE LOOSE
WARNING!
LEADER CABLE
DMX CONTROL
LINE NEUTRAL GROUND DATA - DATA +
white
white green
orange redgreen
black
black
LEADER CABLE
4 3 4 1 F U L C R U M W A Y N E
R I O R A N C H O , N E W M E X I C O 8 7 1 4 4
5 0 5 . 3 4 5 . 0 8 8 8
I N S I G H T L I G H T I N G . C O M
PILOT-PEX_ 5/6/2019
