PERFORATED FACE RETURN GRILLE - KBE International
1
www.kbeinternational.com SAP APPLICATION The PG is primarily a return & exhaust air grille which can be used in commercial or industrial applications which require low resistance, high to medium air volume. The perforated face provides a clean design and uncluttered appearance preferred by architects. The PG grille can be mounted in a panel for a standard T-bar ceiling. FEATURED STANDARD CONSTRUCTION OPTIONS • Opposed blade damper (OBD) can be fixed on the back of the grille. • Concealed clips for fixation or countersunk screwholes in the border for fixation. • Rubber gasket on the back of the frame. • 1” (25mm) Aluminum Filter. • Mill finish (brut), all type of RAL finishing. REV:4.0 2020 Date:21/08/2020 PERFORATED FACE RETURN GRILLE PG •Frame: - Constructed from heavy extruded aluminum material with interlocked corners and mechanically stacked to form a rigid frame. •Face: - Face pattern perforated 22 gauge thickness with 4 mm hole diameter and 40% open free area. •Finish: - RAL 9010. •Sizes: - Minimum size : 6” x 4” - Maximum size : 48” x 24” - Larger sizes are constructed of factory joined multiple sections. 23 /32" (18.4mm) 23 /32" (18.3mm) 2" (50mm) NB : 5 mm Clearance is deducted from your order size. 4ways
Transcript of PERFORATED FACE RETURN GRILLE - KBE International
SAP
www.kbeinternational.com
SAP
APPLICATION
The PG is primarily a return & exhaust air grille which can be used in commercial or industrial applications which require low resistance, high to medium air volume. The perforated face provides a clean design and uncluttered appearance preferred by architects. The PG grille can be mounted in a panel for a standard T-bar ceiling.
FEATURED STANDARD CONSTRUCTION
OPTIONS
• Opposed blade damper (OBD) can be fixed on the back of the grille.• Concealed clips for fixation or countersunk screwholes in the border for fixation.• Rubber gasket on the back of the frame.• 1” (25mm) Aluminum Filter.• Mill finish (brut), all type of RAL finishing.
REV:4.0 2020 Date:21/08/2020
PERFORATED FACE RETURN GRILLE
PG
•Frame:- Constructed from heavy extruded aluminum material with interlocked corners andmechanically stacked to form a rigid frame.
•Face:- Face pattern perforated 22 gauge thickness with 4 mm hole diameter and 40% openfree area.
•Finish:- RAL 9010.
•Sizes:- Minimum size : 6” x 4”- Maximum size : 48” x 24”- Larger sizes are constructed of factory joined multiple sections.
23/32"(18.4mm)
23/32"(18.3mm)
2"(50mm)
NB : 5 mm Clearance is deducted from your order size.
4ways
