PERFILES LED
-
Upload
feixa-audiovisuales-sl -
Category
Documents
-
view
220 -
download
6
description
Transcript of PERFILES LED
RECESSED SLIM LINE 15mm ............................................................... 4
RECESSED SLIM LINE 7mm .................................................................. 6
SLIM LINE 15mm ........................................................................................ 8
SLIM LINE 15mm with optic lens 30° .......................................... 10
SLIM LINE 15mm with optic lens 60° ......................................... 11
SLIM LINE 7mm ........................................................................................ 12
SLIM LINE 7mm with optic lens 30° ............................................ 14
SLIM LINE 7mm with optic lens 60° ............................................ 15
ALU-45 (45 degree light angle) ...................................................... 16
ALU-CORNER ............................................................................................. 19
POWER LINE 35mm ............................................................................... 22
POOWER LINE WIDE 80 ....................................................................... 24
RECESSED POWER LINE 35mm ...................................................... 26
ALU-ROUND .............................................................................................. 30
ALU-ROUND with optic lens 30° ................................................... 32
ALU-FLAT ...................................................................................................... 44
ALU-STAIR ..................................................................................................... 46
ALU-WALL .................................................................................................... 49
ALU-WALL-US ............................................................................................. 54
SLIM LINE WIDE 8mm ........................................................................... 56
RECESS SLIM LINE WIDE 8mm ......................................................... 58
SLIM LINE WIDE 15mm ........................................................................ 60
ALU-CEILINg .............................................................................................. 62
POWER LINE SLIM 30mm ................................................................... 65
RECESSED POWER LINE SLIM 30mm ........................................... 67
ALU-SWISS 15mm ................................................................................... 70
SLIM LINE WIDE 20mm ........................................................................ 72
RECESS SLIM LINE WIDE 20mm ...................................................... 74
SLW20B WALL INSTALLED LED PROFILE .................................... 76
PL35 ONE SIDE LIgHT OUTPUT ....................................................... 78
PL35 TWO SIDE LIgHT OUTPUT ...................................................... 80
ALU-SQUERE LED PROFILE ................................................................. 82
SLW10 LED PROFILE .................................................................84
O N
3
ADVANTAgES:
• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diffuser • Three different light diffusers to choice from, frosted (LEDs dots free), 50% frosted and transparent. • Reduced light lost design • Small dimensions only 15mm high • Suitable for standard LED stripes up to 12mm of wideness • Available on stock in anodized silver color • Possible length and color customizing at MOQ • Available with dedicated finish end caps • Indoor use only, IP20
FUTURES:
• Nice looking, clean, contemporary housing for the LEDs
• LEDs heat sink housing and mechanical protection for the LED stripes against damage
APPLICATIONS:
• Recessed under kitchen cabinets LED lighting• Floor led lighting (with IP54 led’s)• Recessed storage shelves LED lighting• Gypsum ceiling, wall accent LED lighting• Furniture production• Exhibition boot LED lighting
RECESSED SLIM LINE 15mmR L ; 5m
24,5
17,5
3,5
12,2
13,5 15
4
It is recessed type of the aluminum LED profile to build into material as MDF or other. The profile can be also recessed into floor (with IP54 LED ribbon inside only), wall or ceiling and the wide edges of the profile will cover the edges of insertion row completely. Extruded polycarbonate, high quality diffuser now is placing/removing from the front on click. It is UV resistant, and damage resistant (walk over safe, tested). Customer has a choice of three types of the diffusers what can be placed into that LED profile, frosted, 50% frosted and transparent.
The fully frosted diffuser do not shows led dots on the diffuser surface and the LED’s are not visible. Frosted diffuser is giving nice smooth light line. Base of the profile is made from anodized aluminum in standard silver color. The product can be customizing like anodized in 9 different colors, and paint in any RAL color. Additionally on the outside surface we can place tin/screech resistant foil, which imitates the wood structure on the profile for perfect mach with kitchen cabinets. All most popular woods structure foils are available.
Profile is available on stock in 1m or 2m sections with finish accessories as end caps or mounting brackets. The aluminum profile will provide mechanical and thermal protection for the LEDs. The profile can be use with high power LED’s up to 1W each. Led profiles are IP20 can be use outside with IP67 led ribbons only.
DE N
LP-AL-RSL15
LP-EC-RSL15
FEATURES:
• Recessed type with clean design• Cover up the edges of the mill Vely low profile,
only 7mm high Perfect for low power LED stripes • Diffuser placed/removed from the top Designed
for indoor use only• Available with frosted or clear diffuser• Made from aluminum / anodized
APPLICATIONS:
• Kitchen cabinets LED lighting• Furniture production• Interior accent lighting• Shop shelf exposition
LP-AL-RSL7
RECESSED SLIM LINE 7mmRS 24 m
6
Recessed Slim Line 7mm LED profile it is dedicated for build-in into surface material. The profile can be recess into any kind of surface and the expending to the sides the profile “wings” covers the mill row completely. This type of profile is often use for build in underneath kitchen cabinets LED lighting, retail store shelf lighting, floor, stairs, walls or ceiling accent LED lighting. The profile itself is generally dedicated for standard up to 12mm LED stripes. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LEDs itself. It comes with choice of three different quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. For RSL7 LED profile we offer some accessories such as finish end caps which helps to professionally finish the profile.
LP-EC-RSL7
D O
7
FEATURES:
• High quality diffuser, placing/removing from front on click• Led dots free profile (frosted)• Walk on safe diffuser, UV resistant polycarbonate diffuser• Available with 50% frosted, frosted and transparent diffuser• LED dots free on frosted diffuser (high density LED’s ribbon)• Made from anodizing aluminum• Suitable for low/high power led bars• Available lengths – 1m, 2m• Heat sink and physical protection to the LEDs• For indoor use only
APPLICATIONS:
• Furniture production (kitchen / office)• Interior light design (stairs / storage / floor)• Stores shelf LED lighting• Independent LED lamp• Exhibition boot LED lighting
SLIM LINE 15 mm
12,2
15
17,5
1
SL 5; 5 m
8
Slim Line 15mm is high quality surface mounting anodized aluminum LED profile which is dedicated for the standard LED stripes up to 12mm of wideness. The profile is coming with choice of three high quality UV resistant and damage resistant snap-in diffusers, frosted, 50% frosted and transparent. The profile with choice of frosted diffuser is “LEDs DOTS FREE” and deliver soft smooth light on the whole surface. The aluminum profile it is performing as the heat sink to the leds and also presents itself as the nice, stylish and professionally looking housing. Available accessories such as end caps or mounting brackets or optic lenses helps professionally finish every installation.
D P ON
LP-MC-SL15LP-EC-SL15
LP-AL-SL15
9
FEATURES:
Surface instalation LED profile with 30° optic lens, UV stabilized. It comes with choice of the mat or clear lens. Available in lengths of 1m/2m.
The outgoing light is concentrated into the 30° beam angle.
SLIM LINE 15 mmwith optic lens 30°
13
6
5
120° (led)
210
28,6°
104,4°
34,3°
SL 5; 5 m
Aluminum end caps for SL15LED profile with 30° optic lens
LP-EC-30SL15-H1, H2
30° optic lens for SL15 & SL7mat or clear nish
LP-AL-SL15-L30
0
FEATURES:
Surface instalation LED profile with 60° optic lens, UV stabilized. It comes with choice of the mat or clear lens. Available in lengths of 1m/2m.
The outgoing light is concentrated into the 60° beam angle.
SLIM LINE 15 mmwith optic lens 60°
; 7, m
60° optic lens for SL15 & SL7mat or clear nish
LP-EC-60SL15- H1, H2
Aluminum end caps for SL15LED profile with 60° optic lens
LP-AL-SL15-L60
13
3
3 50
120° (led)
250
37,4°
48,9° 60°
FEATURES:
• High quality diffuser, placing/removing from front on click• Walk on safe diffuser, UV resistant polycarbonate diffuser• Available with opal, 50% opal and transparent diffuser• Available lengths – 1m, 2m, 3,5m (large quantity orders)• Made from anodizing aluminum• Suitable mostly for flexible led stripes• For indoor use only• Low profile only 7mm high
APPLICATIONS:
• Furniture production (kitchen / office)• Interior light design (stairs / storage / floor)• Stores shelf LED lighting• Independent LED lamp• Exhibition boot LED lighting
LP-AL-SL7
SLIM LINE 7 mmS 7 mm
LP-MC-SL7
LP-EC-SL7
2
Slim Line 7mm it is surface mount high quality anodized aluminum LED profile only 7mm high which is dedicated for standard led stripes up to 12mm in the wideness. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LEDs itself. It comes with choice of three different quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. For this SL7 profile we offer several different accessories such as optic lenses, mounting brackets and end caps which helps to professionally finish the profile.
LP-MC-SL7
LP-EC-SL7
O
3
SLIM LINE 7 mmwith optic lens 30°
S 7 mm
Slim Line 7mm LED prole with 30° optic lens, available with UV stabilized lens in mat or transparent nish.
Aluminum end capsLP-EC-30SL7-H1, H2
LP-AL-SL7-L30
LP-EC-30SL7- H1,H2
120° (led)140°
115°
3,5
1
2,55
6
SLIM LINE 7 mmwith optic lens 60°
; 7 , m
Slim Line 7mm LED prole with 60° optic lens, available with UV stabilized lens in mat or transparent nish.
Aluminum end caps LP-EC-60SL7-H1, H2
LP-AL-SL7-L60
LP-EC-60SL7-H1, H2
120° (led)
115° 1
53
61°
3,5
2,5
5
FEATURES:
• Highqualitydiffusernowplacingfromthefrontonclick• PolycarbonateUVresistant,damageresistant(walkoversafe)• Diffuseravailableintransparent,50%opalandopal• Baseoftheprofileismadeinanodizedaluminum• ProfileavailableinRAL9010andstandardanodecolor• Profileisavailableinlengths1m/2mor3,5m(largequantityorder)• ALU CORNERissuitableforlowpowerandhighpowerleds• Simplicitydesignwithhighqualityfinish
APPLICATIONS:
• UnderkitchencabinetsLEDlighting• StoresshelvesLEDlighting• Furnitureproduction,insidecabinetsLEDlighting• StorageshelvesLEDlighting• ExhibitionbootLEDlighting
ALU-45˚LEDPROFILE
LP-EC-D1Endcapw/outcablehole
LP-EC-D2Endcapwithcablehole
LP-MC-D1Mountingbracket
A U 4 ˚; m
ThisisQualityanodizedaluminumLEDprofileinsilverorRAL9010finishcolorwith45˚degreeLEDslightemittingangle.ALU-45˚hasbeendesignedtofitinatanycornerLEDlightingapplication.ThelightemittedbytheLEDsisdirectedbytheshapeoftheprofilein45˚degreeangletodonotblindthepersonwhostandsinfrontofit.TheLEDprofileisdedicatedforthestandardLEDstripesupto12mmofwideness.Largeamountofaluminumweight[0,45kg/m]providesexcellentthermalheatsinkconditiontotheLEDsandalsopresentsitselfasthenice,stylishandprofessionallylookinghousing.Theprofileitisabletohandleandmaintainstabletemperature[45/50˚C]atlongperiodoftimetheinloadupto25W/m.ItcomeswithchoiceofthreedifferentQualityUVresistant,snap-indiffusers,frosted,50%frostedandtransparent.TheavailableaccessoriesforALU-45˚LEDprofilesuchasendcapsandmountingbracketshelpsprofessionallyfinishtheinstallation.
LP-AL-D2LP-EC-D1Endcap LP-MC-D1
Mountingbracket
D P ON
7
F h
rn r s i
t l
5˚ A O O
8
FEATURES:
• Highqualitydiffusernowplacedfromthefrontonclick• PolycarbonateUVresistant,damageresistant(walkoversafe)• Diffuseravailableintransparent,50%opalandopal• Baseoftheprofileismadeinanodizedaluminum• ProfileisavailableinRAL9010andstandardanodizedcolor• Profileisavailableinlengths1m/2mor3,5m
(largequantityorder)• ALU CORNERissuitableforlowpowerandhighpower
APPLICATIONS:
• UnderkitchencabinetsLEDlighting• StoresshelvesLEDlighting• Furnitureproduction,insidecabinets
LEDlighting• StorageshelvesLEDlighting• ExhibitionbootLEDlighting• InteriorLEDlighting
ALU-CORNER m
8.25
9
ProfileismadefromanodizedaluminuminsilverorRAL9010finishcolorwith45˚degreeLEDslightemittingangle.ALU-CORNERhasbeendesignedtofitinatanycornerLEDlightingapplication.ItisoftenuseforunderkitchencabinetsandshelfLEDlighting.ThelightemittedbytheLEDsisdirectedbytheshapeoftheprofilein45˚degreeangletodonotblindthepersonwhostandsinfrontofit.TheLEDprofileisdedicatedforthestandardlowpowerormidpowerLEDstripesupto25W/mwhichwidenessisupto12mm.TheprofileisperformingastheheatsinktotheLEDsandappearsasnice,stylishhousingfortheLEDstripesitself.TheprofileiscomingwithchoiceofthreehighQualityUVresistantanddamageresistantsnap-indiffusers,frosted,50%frostedandtransparent.Itisavailableonstockwithrelatedaccessoriessuchasendcapsandmountingbracketswhichhelpsprofessionallyfinishtheprofile.
ESC I
20
E AC
LP-MC-E1Mountingbrackets
LP-MC-E1
LP-EC-E1LP-EC-E2Endcapwithcablehole LP-EC-E2
LP-AL-E1
2
FEATURES:
• Highstandardofanodizingaluminumsurface• HighQualityUVresistantpolycarbonatesnapindiffuser• Twodifferentlightdiffuserstochoicefrom,frosted
(LEDsdotsfree)andtransparent.• LEDsDOTSFREEdesign(frosteddiffuser)• Contemporarydesignwhichcanbesuspendedfromtheceilingorsurfaceinstalled• SuitableforstandardorhighpowerLEDstripesupto30W/m• Availableonstockinanodizedsilvercolor• PossiblelengthandcolorcustomizingatMOQ• Availableonstockwithdedicatedaccessoriessuchastwotypeofendcaps• Indooruseonly,IP20
APPLICATIONS:
• LEDlampcomponent• RetailstoremainceilingLEDlighting• SuspendedLEDlightinglamp• Exhibitions,hotels,restaurantsmainLEDlighting• DecorativelinearLEDlighting• ExhibitionbootLEDlighting
POWERLINE35mm
EndcapstypeLP-EC-PL1
EndcapstypeLP-EC-PL2
24
35
31
35
30
20
ST2 2
PL m 5m
22
ThisprofileisdedicatedtobeuseastheLEDlightingxtureformainlightingattheoffices,librariesshowroomsorabovethekitchentable.Itismadefromanodizedaluminumandissuitableforupto32mmwidehighpowerLEDbars.
Theprofilecanbesuspendedfromtheceilingonthestainlessstillwiresorcanbescrewitdirectlytothesurface.ProfilecomeswithpolycarbonateUVresistantfrostedortransparentdiffuserplacedandremovedfromthefrontonclick.
Wehavedesignedtwotypesofnishedendcupsfortwodierentinstallationoptions.Profileisavailableinlengthof1mor2m.
LP-AL-PL
EndcaptypeLP-EC-PL1
D P ON
23
POWERLINEWIDE80mm
This is new surface installation 80mmwidth high qualityanodized aluminum LED profile with “LEDs DOTS FREE”frosteddiffuser.
The anodizing surfacequality is the same as in other ourprofilesanditisfreeofanyextrusionmarksandproductionscreeches. Anodizing surface is tick enough to resistthe transportation and sometimes difficult operatingcondition. Extended internal LED chamber dimensionsforLEDstripesgivesyoufreehansoftypeandsizeofLEDstripe/swhatcanbeaccommodate insidetheprofile.Youcanusealmostanytypeofledstripeandyoudecidehowmuch light will came out by using the right LED stripe.Theheavydutyheat sink (PLW80profile) is prepared andcapable to provide excellent cooling system forlow/highpowerLEDbars[upto35W/m].Speciallyshaped internal chamber reduce the light lost(bouncing of the light inside the profile) anddrive the light sleight up to the diffuser surfacewhere the light diffusion is taking place. Theprofile is coming with choice of two high qualityUV stabilized, snap in diffusers in frosted andtransparent. PLW80 profile is available with colormatchingaluminumendcapsforprofessionalfinish.
P W 0; 0 m
LP-EC-PLW80Aluminumendcaps
LP-AL-PLW80
2
25
RECESSEDPOWERLINE35mm
LP-EC-RPLEndcaps
24 3
34
35
35
44
31
30
20
ST2.2
RPL m
FEATURES:
• Highqualitypolycarbonatediffuser• NoLEDdotsshowsonthediffusersurface• Righthigh,softandsmoothlightdiffusion• Diffuserisplaced/removedfromthetoponclick• Highqualityanodizedaluminumbase• Heavyduty“heatsink”forhighpowerLEDs• Compatiblewithour30mmwidehighpowerLEDbars• Matchingfinishendcupsforthisprofileareavailable• Gypsumceilinginstallation• Availableinlengthof2m/1mwithclearorfrosteddiffuser
APPLICATIONS:
• ShowroomsceilingLEDlighting• RestaurantsceilingLEDlighting• ShoppingmallsLEDlighting
2
ThisprofileisdedicatedtobuildintothegypsumceilingastheLEDlightingxtureformainlightingattheoffices,showrooms,restaurantsandshops.Itismadefromanodizedaluminumandissuitableforupto32mmwidehighpowerLEDbars.ProfilecomeswithpolycarbonateUVresistantfrostedortransparentdiffuserplacedandremovedfromthefrontonclick.Thelightdiusionwiththefrosteddiffuseriscomplete.RPL35isgivingsoftlightonthewholesurface.ProfileisdedicatedforthehighpowerLEDlighting.Itisavailableinlengthof1mor2m.
D P ON
27
27
12
6038
27
60 35
33
4
ST 3.5x9.5(DIN 7970-1985)
381227
33
4
35
ST 3.5x9.5 DIN 7970-1985)
Gypsumceilinginstallation.
CE E O R I L NO IO
OPTION1.W/OUTFIRERESTRICTIONS
OPTION2.W/OUTFIRERESTRICTIONS
28
38
39
12
35
33
4
ST 3 5x19 (DIN 7970-1985)
38
OPTION3.WITHFIRERESTRICTIONS
CE E O R I L NO IO
LP-EC-RPL
LP-AL-RPL
29
ALUROUNDØ24mmALU R UND; 2
FUTURES:
• Highqualityroundshapepolycarbonatediffuser• Diffuserisplaced/removedfromthetoponclick• Highqualityanodizedaluminumbase• Heavyduty“heatsink”forhighpowerLEDs• Compatiblewithupto12mmwidehighpowerLEDbars• Availablefinishendcupsandmountingsystemwith
angleregulation• Twodifferentinstallationoptions(wallorsuspended)• Availableinlengthof2m/1mwithclearorfrosteddiffuser
APPLICATIONS:
• Hotelsheadboardbedreadinglampwithangleregulation
• ShowroomstrackLEDlighting• ReceptiondeskmainLEDlighting• RestaurantsabovetablemainLEDlighting• ShoppingboutiquesexpositionLEDlighting
121,2o
Ø24
14,2
12,2
5
1,2
30
ThisissmallroundshapeLEDprofilewithrounddiffuser.Ithasbeendesignedforhighpowerledlighting.MassivealuminumweightprovidesexcellentmechanicalandthermalprotectiontotheLEDs.TheprofileismadefromanodizedaluminumanditcomeswithroundUVresistantpolycarbonateclearorfrosteddiffuser.Theinstallationofthediffuserisfromthefrontonclick.Installationandremovingiseasyandsimple.Itcomesin1mor2msectionsandissuitableforhighpowerledlighting.TheALU-ROUNDcanbeinstalledinthewardrobeorclosetastheclothesrodledlighting,inthejewelrycases,refrigeratedcabinetsatthegrocerystoreandotherplaces.
D P ON
LP-EC-R2
LP-EC-R1
LP-MC-R1
LP-AL-R0
3
48
ALU-ROUND with 30° optic lens
LU ROUND; Ø 4
2
5
1
12 20
79
6
3 50
250
120°
81,4°
39,6°
20°
12 20
79
6
5
210
120°
67,4°
42°
20°
1:1
Alu-Round profi le with 30° lensLEDs type 3528
Alu-Round profi le with 30° lensLEDs type 5060
LP-AL-RO-LK1, K2
LP-EC-30ROAluminum End Caps
fi =24
32
A O N E O
This is specially dedicated wall arm for the Alu-Round Led profi le. The special material will draw behind the profi le is allowing us to slide in the arm and hold fi rmly in place the LED fi xture.
The power feeding cable was transferred to the profi le thru the wall arm the best possible way.
The profi le now can be installed at any place on the wall lighting up the wall or some objects standing next to. The design of the wall arm is matching with the design of the Alu-Round profi le.
Wall-Arm
ll m
feeding cable
i
step 1
M O k
p 2
w u i wi f n c
10
5
20450
2
scale 1:1LP-MC-RO-WA
20
32
102
33
O D AC O Wall-Arm Instalation guide
Wall
Dr ll 8(for wire 2x4)
2
ALU-Round
Wire 2mmx4mm
Cover sticker
LP-MC-RO-WA20
32
102
LP-MC-RO-WA cross section look
LP-AL-RO
A
A
2x M3 Screw
3
A O N E O Art Lighting Arm
The main purpose for this arm is lighting from down or from above the objects such as art work, gallery, jewelry etc.
The light emitted by leds is directed in 45 degree angle.
The arm is matching perfectly with the Alu-Round led profi le.
The feeding cable is hidden in the arm and can be coverd by the sticky aluminum imitating tape.
AL-EC-RO-AA
35
O D AC O Art Lighting Arm
AL-EC-RO-AA
1225
15
5
2
Cross section look
256,8
39,5
69,8
Feeding cable mill
scale 1:1
3
A O N E O
LP-EC-R1aluminum
LP-MC-R1
Fluent lighting angle regulation from 0-180 degreewith the mounting clip LP-MC-R1
LP-EC-R2
LP-EC-R1
180 degree position
37
O D AC O Closet bracket for Alu-Round led profi le
R20,5
scale 1:1
24
155
4
scale 1:1
Wall to wall closet led rod (Alu-Round) installation
LP-MC-R2Closet bracket
Closet brackets are made from special material whichdo not brake during the screwing or heavy load
LP-AL-RO
LP-MC-R2
38
A O N E O Intermediate support arm for Alu-Round led profi le for closet mount
Stem mount of 1m led profi le (Alu-Round) at the closet
End mount type - 2m of led profi le Alu-Round at the closet with closetbrackets and intermediate support arm
Maximum capability of weight handling per one arm is 25kg
Alu-Round intermediate support arm LP-MC-R3
32,4mm
62 m
m
scale 1:1
Stem mount type of led profi le (Alu-Round) at the closetwith intermediate support arm
End mount type 1m of led profi le (Alu-Round) at the closet with closet brackets and intermediate support arm
39
A R N ES O E Intermediate support arm for Alu-Round led profi le for closet mount
LP
L O
LP-EC-R1
LP-MC-R3
LP-AL-RO
Maximum capability of weight handling per one arm is 25kg
STEM MOUNT
0
A O N E O Intermediate support arm for Alu-Round led profile for closet mount
Intermediate supportsLength : 100cm/39,4” - 3pcs 200cm/78,8” - 5pcs
STEM MOUNT
4
END MOUNT
A R N ES O E Intermediate support arm for Alu-Round led profi le for closet mount
Maximum capability of weight handling per one arm is 25kg
LP-MC-R2End mount closet bracket
LP-AL-RO
LP-MC-R3Intermediate support arm
M
R
L M R
2
A O N E O Intermediate support arm for Alu-Round led profi le for closet mount
(example 1000mm) [39,37"]SPECIFY LENGHT
70m
m [
2,76
"]
(example 2040mm) [80,31"]SPECIFY LENGHT
Closet bracket
Housing
Lens
Nut M3Washer M3
Screw M3
Self-threded wood screw
End mount
Feeding cable
End mount
Intermediate supportsLength : 100cm/39,4” - 1pcs 200cm/78,8” - 2pcs
END MOUNT
43
ALU FLAT LED PROFILEALU FLAT; 7
FUTURES:
• High quality diff user now placed from the front on click• Polycarbonate UV resistant, damage resistant (walk over safe)• Diff user available in transparent, 50% opal and opal• Base of the profi le is made in anodized aluminum• Profi le is available in RAL9010 and standard anodized color• Profi le is available in lengths 1m/2m or 3,5m (large quantity order)• ALU-FLAT is suitable for low power and high power LEDs• Simplicity in design with high quality fi nish• Profi le and diff user is “walk over safe”• Protection grade IP20
APPLICATIONS:
• Under kitchen cabinets LED lighting• Stores shelves LED lighting• Floor LED lighting• Storage shelves LED lighting• Exhibition boot LED lighting• Interior LED lighting
LP-AL-FL
FLFL-EC-FL3End cap with holding ear
FLLP-EC-FL1End cap without holding ear
LP-EC-FL1 LP-EC-FL2LP-EC-FL3
A C E
Aluminum LED profi le only 7,6mm. The aluminum profi le walls thickness and the damage resistant diff user allow you to walk over this profi le. It has been positively tested and is “walk over” safe. The profi le is available in anodized version of aluminum and RAL9010. Profi le comes with polycarbonate UV resistant, damage resistant diff user, which now is placed, into the profi le from front for click. The customer has choice of use transparent, 50% frosted and frosted diff user. Profi le provides mechanical and thermal protection (heat sink) to the LEDs and is suitable for high power LED lighting. The profi le has many diff erent applications it can works as under store shelves independent LED lamp or can be installed on the fl oor to cover the connection and provide additional protection for the computer cables.
D P ON
45
ALU STAIR LED PROFILEALU TAIR; 6 27
6 6 . 9 2
4 4 . 4 1
627
.36
3 9 °
1 5
1 2 . 2
1
1 . 61 . 4
1 . 6
1 4 . 2
FUTURES:
• Hard aluminum alloy and special anodizing thickness • High standard of anodizing aluminum • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted
(LEDs dots free) and transparent.• LEDs DOTS FREE design (frosted diff user)• Stair installed LED profi le with smooth line of light• Suitable for standard or high power LED stripes up to 30W/m• Available on stock in anodized silver color• Possible isolation of the diff user and end cap against
water with transparent silicone• Possible length and color customizing at MOQ• Available on stock with dedicated end caps• Indoor use only, IP20
APPLICATIONS:
• Stair LED lighting illumination • Hotels, cinemas, restaurants, night clubs, stair LED lighting
Stair installed LED profi le is designed for steps illumination in darker rooms. It has been made from hard anodized aluminum alloy for walk over safety and time ware out resistant. The profi le is coming with choice of two high quality UV resistant, damage resistant snap-in diff users in frosted and transparent. The frosted diff user is “LEDs DOTS FREE” and is giving nice and soft smooth line of light on the whole diff user surface. The profi le LED chamber can accommodate standard or high power led stripes up to 12mm of the wideness. The profi le can be installed inside or outside if connected with IP67 LEDs stripes and profi le LED chamber will be silicone insulated against water. The available accessories such as end caps helps professionally fi nish the profi le. Installation steps are fully explained in the PDF catalogue.
D P ON
LP-AL-ST
LP-EC-SRend cap (left)
hard aluminum alloy, ware out resistant
LP-AL-ST
free space for silicone insulation of the led chamber (option)
free space for silicone insulation of the led chamber (option)
dots free led profi le (frosted)12,2 mm wide led chamber
47
IR P F E Stair instalation guide
STEP 1
STEP 2
STEP 3
8
ALU-WALL LED PROFILEL ; 2 , mm
FUTURES:
• Asymmetric, wall installed LED profi le for fl oor LED lighting • High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted or transparent.• Minimalistic design• Extra LED heat silk capability of the profi le (up to 30W/m)• Available on stock in anodized silver color• Suitable for high power or low power LED stripes• Possible length and anodizing color customizing at MOQ• Available on stock with dedicated fi nish end caps• Indoor and outdoor use (outdoor with IP67 leds)
APPLICATIONS:
• Asymmetric, wall build-in type LED profi le for fl oor LED lighting
• Floor hallways LED lighting profi le• Perfect for hotels hallways, restaurant,
hospitals, underground• Walkways LED lighting
49
LP-EC-WLL
LP-EC-WLR
Wall installed led profi le2m units only
LP-AL-WLLP-AL-WLB
Asymmetric, High Quality anodized aluminum LED profi le which has been design to instal into wall and the light is directed to the fl oor.
It is perfect solution for fl oor LED lighting of long walking area such as hotels hallways, underground subway stations, shopping malls, museum hallways, building fasade. The profi le can be use inside or outside with connection of IP67 LEDs inside. The LED profi le is dedicated for the standard LED stripes up to 12mm of wideness. The profi le is coming with choice of two high quality UV resistant, damage resistant snap-in diff users, frosted and transparent. The aluminum profi le it is performing as the heavy heat sink to the LEDs [0,9kg/m] and also presents itself as the nice, stylish and professionally looking housing. ALU-WALL is suitable for high power [up to 30W/m] or low power LEDs. It is available on stock with related accessories such as end caps which helps professionally fi nish the profi le. Installation options are fully explained in the PDF catalogue.
E RIP O
0
A W A O O O
FLOOR
INSTALATION OPTION No. 1
30cm
- 50
cm
18
6
LL
5
A A O O O
INSTALATION OPTION No. 230
cm -
80cm
Ceiling
Floor
6
18
2
A W A O O O
INSTALATION OPTION No. 3
60
25
1.
AL W LL 3
2.
3.
53
ALU-WALL US LED PROFILEALU ALU W LL US; 6 7
FUTURES:
• Floor LED lighting profi le for wood structure walls to build-in • High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted or transparent.• Minimalistic design• Extra LED heat silk capability of the profi le (up to 30W/m)• Available on stock in anodized silver color• Suitable for high power or low power LED stripes• Possible length and anodizing color customizing at MOQ• Available on stock with dedicated fi nish end caps• Indoor and outdoor use (outdoor with IP67 leds)
APPLICATIONS:
• Floor LED lighting profi le for wood structure walls to build-in(US,Canada)
• Floor hallways LED lighting profi le• Perfect for hotels hallways, restaurant,
hospitals, underground• Walkways LED lighting
End cap feeding cable hole is adapted for 1/8” pipe connector
LP-EC-WLA-Lend cup left
LP-EC-WLA-Rend cap right
LP-AL-WLA
L O OP O S
12" -
20"
5/8"
0,24"
Asymmetric, anodized aluminum LED profile which is dedicated for build-in into the wood structure walls and direct the LED light to the floor.
The thickness of the profile [16mm] is about the same as the standard wood plywood sheets used for wall construction at US or Canada. The profile itself is modification of the standard ALU-WALL profile and adaptation for different buildings, houses and walls construction structure at some places in the world. The other parameters and product functions are the same like for standard ALU-WALL LED profile.
D P ON
A
2" 16"4
55
SLIM LINE WIDE 8mmSLW ; 2 6
FUTURES:
• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted or transparent.• Reduced light lost design• Small dimensions only 8mm high• Extra space inside the profi le (20mm) for IP67 led ribbons,
RGB or double row LED stripe• Available on stock in anodized silver color• Possible length and color customizing at MOQ• Available with dedicated accessories such as end caps
and mounting brackets• Indoor use only, IP20
APPLICATIONS:
• Led lamps• Retail store shelf LED lighting• Kitchen cabinets LED lighting• Exhibitions, hotels, restaurants LED lighting• Interior design linear LED lighting
Slim Line Wide 8mm, surface mount profi le has been design and made for wider then standard (10/12mm) LED stripes.
The wideness inside the profi le is 20mm and can accommodate any type of the led stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do not fi t into standard profi le. The wide diff user is not cutting down the angle of the LEDs and presents itself as the quality product. The profi le it is available with two snap-in UV resistant diff users, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The installation can be easily and professionally fi nish with available accessories such as end caps and mounting brackets.
D P ON
LP-EC-SLW8LP-MC-SLW8LP-AL-SLW8
57
RECESSED SLIM LINE WIDE 8mmR LW ; 7 2 6
FUTURES:
• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Three diff erent light diff users to choice from, frosted,
50% frosted and transparent.• Reduced light lost design• Small dimensions only 8mm high• Extra space inside the profi le (20mm) for IP67 led ribbons,
RGB or double row LED stripe• Available on stock in anodized silver color • Suitable for low power LED stripes • Possible length and color customizing at MOQ• Available with dedicated fi nish end caps• Indoor use only, IP20
APPLICATIONS:
• Build-in type LED profi le• Retail store build-in shelf LED lighting• Kitchen cabinets build-in LED lighting• LED profi le for fl oor, wall, ceiling build-in LED lighting• Exhibition stands, hotels, restaurants LED lighting • Interior design LED lighting
29,6
18,45,6 5,6
20
22,6
1,3
8,47
5,75
5,758,
47
8
Recessed Slim Line Wide 8mm is the version of the LED profi le for build-in into material. The profi le can be recess into any kind of surface and the expending to the sides the profi le “wings” covers the mill row completely. This type of profi le is often use for build-in underneath kitchen cabinets led lighting, retail store shelf lighting. The profi le itself is generally dedicated for wider then standard (10/12mm) LED stripes. The wideness inside the profi le is 20mm and can accommodate any type of the led stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do not fi t into standard profi le. The wide diff user is not cutting down the angle of the LEDs and presents itself as the quality product. The profi le it is available with two snap-in UV resistant diff users, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The installation can be easily and professionally fi nish with available accessories such as aluminum end caps.
D P ON
LP-EC-RSLW8
LP-EC-RSLW8
LP-AL-RSLW8
59
SLIM LINE WIDE 15mmSLW ; 22 6mm
FUTURES:
• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted
(LEDs dots free) and transparent• LEDs dots free diff user (frosted diff user)• Small dimensions only 15mm high• Extra space inside the profi le (18mm) for IP67 led ribbons,
RGB or double row LED stripe• Available on stock in anodized silver color • Suitable for high power LED stripes up to 30W/m• Possible length customizing at MOQ• Available with dedicated fi nish end caps and mounting bracket• Indoor use only, IP20
APPLICATIONS:
• Led lamps• Retail store shelf LED lighting• Kitchen cabinets LED lighting• Exhibitions, hotels, restaurants LED lighting• Interior design linear LED lighting
18,4±0,15
22,618
1,1
15,6
6
LP-MC-SLW15LP-EC-RSLW8
0
Slim Line Wide 15mm surface mount profi le is “LEDs DOTS FREE” design which deliver nice soft and smooth light diff usion on the whole surface of the diff user. In principles of the design it has been made for wider then standard (10/12mm) LED stripes. The wideness inside the profi le is 18mm and can accommodate any type of the LED stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which wideness is bigger then 12mm and do not fi t into standard profi les. The wide diff user is not cutting down the angle of the LEDs that and presents itself with the aluminum body as the quality product. The profi le it is available with two snap-in UV resistant diff users, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The available accessories for SLW15 LED profi le such as end caps and mounting brackets helps professionally fi nish the installation.
D P ON
End CapLP-EC-SLW15
Mounting BracketsLP-MC-SLW15
LP-AL-SLW15
Slim Line Wide 15mmwith all accessories
6
ALU-CEILING LED PROFILEALU CEILING; x mm
FUTURES:
• RecessedtypewallwashLEDprofiles• HighQualityUVresistantpolycarbonatesnapindiffuser• Twodifferentlightdiffuserstochoicefrom,frosted
(LEDsdotsfree)andtransparent.• LEDsDOTSFREEdesign(frosteddiffuser)• ExtraspaceinsidetheLEDprofileforwideLEDstripesupto18mm• Recessdesignforbuildintogypsumceiling• SuitableforstandardorhighpowerLEDstripesupto30W/m• Availableonstockinanodizedsilvercolor• PossiblelengthandcolorcustomizingatMOQ• Availableonstockwithdedicatedendcaps• Indooruseonly,IP20
APPLICATIONS:
• MainceilingLEDlighting• RetailstoreceilingLEDlighting• HotelshallwaysLEDlighting• Exhibitions,hotels,restaurantsceilingLEDlighting
62
18mm
ItisQualityanodizedaluminumLEDprofileforbuild-inintothegypsumceiling.TheprofilewiththeLEDsbuilds-inbetweentheceilingandthewallwillemitthelightdirectedstraightdownfromthetopofthewall/ceilingtothefloor,washingupthenexttowallwithlight.Anotherpossibleandoftenuseinstallationforthisprofileistheinstallationbetweenthewallanddirectlightingofthefloor,constructionframeofthenotbuildwall.TheinstallationoptionshasbeenclearlyexplainedinthePDFcatalogue.ALU-CEILINGiscomingwithchoiceofhighqualityfrosted(“LEDsDOTSFREE”)ortransparentsnap-indiffuserandfinishendcaps.Thesnap-indiffuserismadefromUVresistantmaterial.Theprofilecanaccommodatestandardormidpowerledstripesupto18mmofthewideness.ThealuminumprofileisperformingastheheatsinktotheLEDsandalsopresentsitselfasnice,stylishhousingwhereallcomponentsarematchingandarehighquality.
O
45mm
6
LU E L S O O ON
64
POWERLINESLIM30mm; m
FUTURES:
• HighQualityspeciallytreatedanodizingaluminumsurface• HighQualityUVresistantpolycarbonatesnapindiffuser,30mmwide• Twodifferentlightdiffuserstochoicefrom,frosted
(LEDsDOTsFREE)andtransparent.• LEDsDOTsFREEdesign(frosteddiffuser)• Contemporarydesignwhichcanbesuspended
fromtheceilingorsurfaceinstalled• ExcellentheatsinktothehighpowerLEDs• SuitableforstandardorhighpowerLEDstripesupto30W/m• SeparatechambertohideLEDpowersupplier,cables• Availableonstockinanodizedsilvercolorfreeofanyextrusionmarks• PossiblelengthandanodizingcolorcustomizeatMOQ• Availableonstockwithdedicated
aluminumendcaps• Indooruseonly,IP20
APPLICATIONS:
• LEDlampcomponent• RetailstoremainceilingLEDlighting• SuspendedLEDlightinglamp• Exhibitions,hotels,restaurantsmainLEDlighting• DecorativelinearLEDlightingnhospitals,
underground• WalkwaysLEDlighting
6
ThePOWERLINESLIM30mmprofileishighQualityanodizingaluminumLEDprofilewith“LEDsDOTSFREE”frosteddiffuser.TheprofilehasbeendesignedtoworkasindependentsuspendedorsurfacemountingLEDprofilepreparedforfutureinstallationofhighpowerpowerLEDs[upto30W/m].Massivealuminumweight[1,1kg/m]anddimensionsprovidesexcellentthermalheatsinktotheLEDsandalsopresentsitselfasthenice,stylishandprofessionallylookinghousing.Theprofileitisabletohandleandmaintainstabletemperature[45/50o]atlongperiodoftimetheinloadupto30W/m.Theanodizingsurfaceoftheprofileisspeciallytreatedtobefreeofanymicroscreechesorextrusionprocessflowsmarks.TheprofileiscomingwithchoiceoftwohighQualityUVresistant,snap-indiffusersinfrostedandtransparent.Thefreespacechambercanbeuseforhidingthepowersupplierandcables.LEDprofileisavailablerelatedaccessoriessuchascolormatchingaluminumendcapswhichhelpsprofessionallyfinishtheprofile.
E C I
LP-EC-PLS (aluminumendcap)
LP-AL-PLS
66
RECESSEDPOWERLINESLIM30mm;
FUTURES:
• Recessedtypegypsumceilingbuild-inLEDprofilewith30mmwidediffuser• HighQualityspeciallytreatedanodizingaluminumsurface• HighQualityUVresistantpolycarbonatesnapin30mmwidediffuser• Twodifferentlightdiffuserstochoicefrom:frosted(LEDsDOTsFREE)andtransparent• LEDsDOTsFREEdesign(frosteddiffuser)• Recessdesignforbuildintogypsumceiling• ExcellentheatsinktothehighpowerLEDs• SuitableforstandardorhighpowerLEDstripesupto30W/m• Availableonstockinanodizedsilvercolorfreeofanyextrusionmarks• PossiblelengthandanodizingcolorcustomizeatMOQ• Availableonstockwithdedicatedaluminumendcaps• Indooruseonly,IP20
APPLICATIONS:
• MainceilingLEDlighting• RetailstoreceilingLEDlighting• HotelshallwaysceilingLEDlighting• Exhibitions,hotels,restaurantsceilingLEDlighting• DecorativelinearceilingLEDlightinghospitals,underground• WalkwaysLEDlighting
LP-EC-RPLS (aluminumendcaps)
67
Thisisrecessedtype30mmwide,“LEDsDOTSFREE”anodizedaluminumLEDprofilewhichisdedicatedforbuild-inintosuspendedgypsumceilingtoworkasthemainLEDlightingfixture.Thistypeofprofileisoftenuseforbuild-inintothegypsumceilingsattheoffices,showrooms,restaurants,hotelsandshops.ItismadefromanodizedaluminumandisdedicatedforhighpowerLEDs[upto30W/m].Largealuminumweight[0,9kg/m]providesexcellentthermalheatsinktotheLEDsandalsopresentsitselfasthenice,stylishandprofessionallylookinghousing.Theprofileitisabletohandleandmaintainstabletemperature[50/55o]atlongperiodoftimetheinloadupto30W/m.Theanodizingsurfaceofthisprofileisspeciallytreatedtobefreeofanymicroscreechesorextrusionprocessflowsmarks.TheprofileiscomingwithchoiceoftwohighQualityUVresistant,snap-indiffusersinfrosted“LEDsDOTSFREE”andtransparent.Theavailableaccessoriessuchascolormatchingaluminumendcapshelpsprofessionallyfinishtheprofile.InstallationoptionsarefullyexplainedinthePDFcatalogue.
E R O
LP-EC-RPLS (aluminumendcaps)
LP-AL-RPLS
68
3353
12
57
5030
Wkręt ST3 5x19DIN 968)
33
1227
30
50
43
Wkręt ST3 5x9 5(DIN 968)
27
12
6033
43
60
50
30
Wkręt ST3 5x9 5(D N 968)
WITHNOFIRERESTRICTIONS
RP 0 L O I
WITHFIRERESTRICTIONS
WITHNOFIRERESTRICTIONS
6
ALU-SWISSLEDPROFILEALU SWISS x mm
FUTURES:
• SmallindimensionsqualityfinishLEDprofilefor6mm/8mmwideLEDstripes• AvailablewithsnapininstallationbaseforALU-SWISSprofilewhichsimplifytheinstallation• Highstandardofanodizingaluminum• HighQualityUVresistantpolycarbonatesnapindiffuser• Twodifferentlightdiffuserstochoicefrom,frosted(LEDsdotsfree)andtransparent.• LEDsDOTSFREEdesign(frosteddiffuser)• Multiplepurposeprofilewithsmoothlineoflight• Suitableforstandard6mm/8mmwideLEDstripes
withhighdensity120leds/m• Availableonstockinanodizedsilvercolor• PossiblelengthandcolorcustomizingatMOQ• Availableonstockwithdedicatedendcapsandmountingbase• Indooruseonly,IP20
APPLICATIONS:
• MultiplepurposesLEDprofilefor6mm/8mmwideLEDstripes• Hotels,cinemas,restaurants,nightclubs,stairLEDlighting• Furnitureproduction• RetailstoresproductsLEDlightingillumination
70
ThisissmallindimensionsLEDprofilewhichisdedicatedforthestandard6mm/8mmLEDstripes.ALU-SWISSprofileisavailablewithchoiceoftwohighQuality,snap-in,UVresistantdiffusers,frosted“LEDsDOTSFREE”andtransparent.WedesignedandmadeforALU-SWISSprofilethesnap-ininstallationbasewhichyouinstaltothesurfacefirstthenjustsnap-intheprofilewiththeLEDs.Smalldimensionsofthisprofilegiveopportunitytouseitinmanyapplications.TheprofilecanbeuseforthekitchencabinetsLEDlighting,retailstoresshelflighting,automotiveormarineboutsdiscreteLEDlightingandetc.Profileisavailablewithrelatedaccessoriessuchasaluminumendcapsandthesnap-inmountingbasewhichhelpsprofessionallyfinishtheprofile.
O
LP-MC-SS (instalationbase)
LP-AL-SS
1
28
20
20
20
23 20
24
250
18 20
11
50
SLIMLINEWIDE20mmSLW2 x 7mm
Architectural Design of minimalistic LED profile dedicatedfor wide LED stripes up to 18mm of wideness. The profilepresents itself not the ordinary design which brings theadditionalvaluetotheArchitecturaldesignattheend.Littlebittbiggerdimensionsallowtoplaceithigheranditwillbestill visible from thedistance,whereotherprofiles from thesameperspectiveofviewmay looksmall.Theextraordinaryanodizing surface quality, dedicated aluminum end capsand LEDsDOTs FREE frosted diffusermake this profile veryattractive to work with. Increased amount of aluminumprovide excellent cooling for all kinds of LED stripesincludinghighpower.Theprofile is able tomaintain stablethetemperatureatloadupto25W/m.TheSLW20iscomingwitchchoiceoftwohighqualityUVresistant,snap-indiffusers(frostedandtransparent)aswellasrelatedaccessoriessuchasaluminumendcapsandmountingclip.
COMING UP
LP-EC-SLW20
LP-AL-SLW20
72
28
23 20
20
20
20
2,60
34 20
5 50
18 20
24
250
RECESSEDSLIMLINEWIDE20mmRSLW ; 4 2 x 7mm
Recess type of the Architectural design of minimalistic LEDprofilededicatedforwideLEDstripesupto18mmofwideness.The profile is dedicated for the insertion into the gypsumceilingorothermaterialaswalls,storeshelfsorwoodfurniture.ThelittlebittbiggerdimensionsoftheRSLW20profileallowtoplaceithigheranditwillbestillvisiblefromthedistance,whereother profiles from the same perspective of view may looksmall. The extraordinary anodizing surface quality, dedicatedaluminumendcapsandLEDsDOTsFREEfrosteddiffusermakethis profile very attractive toworkwith. Increased amount ofaluminumprovideexcellentcoolingforallkindsofLEDstripesincluding high power. The profile is able to maintain stablethe temperature at loadup to 25W/m.The SLW20 is comingwitchchoiceoftwohighqualityUVresistant,snap-indiffusers(frostedandtransparent)aswellasrelatedaccessoriessuchasaluminumendcaps.
COMING UP
LP-EC-RSLW20LP-AL-RSLW20
74
SLW20B WALL INSTALLED LED PROFILESLW2 B 27 4 x mm with the side wall mounting base
FUTURES:
• AluminumBaseforthewallinstalledprofiles• Universalbasecompatibleforthreewallprofiles• Highqualityanodizingsurface• Matchingdesignwiththelightingprofiles
27,90
18,20
23,
80
23,1 22,25
28
R24
1,50
ST2.2x9.5
ST2.2
36 15
8 20
23
80
18 20
27
40
ST2.2ST2.2
ST2.2x9.5
LP-AL-SLW20B-M2/K2
76
LP-BA-SLW20
LP-EC-BA-H2
ItismodificationofthestandardSLW20profile,theprofilenowismodifiedtobeinstalledsidewaystothemountingbaseandthewallwiththelightdirecteddown.Relativelysmalldimensionmakethiswalllamplooksdistinguishandsmall.Cleanminimalisticdesignexpendthelistofpossibleapplication.TheprofileprovidegreatheatsinktotheLEDsandcancontainledstripesupto18mmwide.Extraordinaryqualityofthealuminumanodizingsurface,UVresistantlightdiffusercompletely“LEDsDOTSFREE”makeitthequalityproduct.Lightingprofilecomeswiththechoiceoftwodiffusers,frostedandtransparent.Theprofileandbasearefinishwiththealuminumendcaps.ThebaseandthelightingprofileSLW20Baresaleseparately.
O 0E L
7
step 1 step 2
step 3 step 4
LP-EC-SLW20B LP-EC-BA-H2
PL35ONESIDELIGHTOUTPUT
FUTURES:
• SinglelightoutputWallLEDlampwithhidingbaseforpowersupply• Moderndesignwithallmatchingcomponents• Highstandardofthealuminumanodizingsurface• SnapinLEDsDOTsFREEfrosteddiffuser• Highpowerheatdissipationcapabilityupto30W/m• Firmconnectionofthebasewiththewallandbasewiththeprofile• Aluminumendcaps
31
20
31
35
24
35
39 95
ST2.2x9.5
ST2.2
76 60
35
35 36 60
31
20
31
26 70
31
ST2.2x9.5
ST2.2 ST2 2
LP-AL-PL35S-M2/K2
LP-EC-PL35S-H1
PL S 7 mm x mm with the power supplying hiding base
78
ThisiswallinstalledLEDprofilewithlightdirecteddown.ItismodificationofourpopularPowerLine35profile.Thedesign,diffuserremainthesamelikeatthePL35profile.ThePL35onesidelightdownwasequippedwiththehidingbaseforthepowersupplier.Hidingbaseismatchingtheprofiledesign,ismadefromthealuminumandscrewitdirectlywithtosurface.BaseisconnectedmechanicallywiththelightingprofilebyafewselfthreatscrewsST2,2x9,5mm.AdditionallythebaseandlightingprofileiscomingwiththealuminumendcapsholdsbytwoscrewsST2,2mm.Theprofileandthebaseissaleseparatelyaswellastheendcaps.TheprofileisdedicatedmostlyforthehighpowerLEDlightingwiththepossibleloadupto30W/m.
O
LP-BA-PL35S-M2/K2 LP-AL-PL35S-M2/K2
P G E A L E L M UN
LP-AL-PL35S-M2/K2
step 1
step 2
PL35 TWO SIDE LIGHT OUTPUTPL D mm x mm with the power supplying hiding base
FUTURES:
• TwowayslightoutputoftheWallLEDlampwithhidingbaseforpowersupply• Moderndesignwithallmatchingcomponents• Highstandardofthealuminumanodizingsurface• SanpinfrostedUVresistantdiffuser• Highpowerheatdissipationcapabilityupto30W/m• Firmconnectionofthebasewiththewallandbasewiththeprofile• Aluminumendcaps
39 95
35
31
14
90
35 31
14
90
ST2 2x9.5
ST2.2
36 60
26 70
31
35 76 60
35
31 14
90
31
14
90
ST2 2x9.5
ST2.2
ST2.2
LP-AL-PL35D-M2/K2
LP-EC-PL35D- H1
80
ThisiswallinstalledLEDprofilewithlightdirectedupanddown.ItismodificationofourpopularPowerLine35profile.Thedesign,diffusersremainthesamelikeatthePL35profile.ThePL35twosidelightupanddownwasequippedwiththehidingbaseforthepowersupplier.Hidingbaseismatchingtheprofiledesign,ismadefromthealuminumandscrewitdirectlytothesurface.BaseisconnectedmechanicallywiththelightingprofilebyafewselfthreatscrewsST2,2x9,5mm.Additionallythebaseandlightingprofileiscomingwiththealuminum,endcapsholdsbytwoscrewsST2,2mm.Theprofileandthebaseissaleseparatelyaswellastheendcaps.TheprofileisdedicatedmostlyforthehighpowerLEDlightingwiththepossibleloadupto30W/m.
O P E L E L M UN
LP-BA-PL35D-M2/K2 LP-AL-PL35D-M2/K2
LP-AL-PL35D-M2/K2
81
step 1
step 2
24,
6
20
16,20
4 8
,40
15,
2
ST2.2
ST3.5x9.5
ALU-SQUERELEDPROFILEALU SQUERE 4 x mm with round shaped di fuser
FUTURES:
• Highstandardofthealuminumanodizingsurface• Highquality,snapin,UVresistantdiffuser• LEDsDOTsFREEdesign(frosteddiffuser)• Suitableforledstripesupto16mmofwideness.• DirectinstallationwiththesurfacebyST3,5x9,5mmscrews• Aluminumendcaps
LP-AL-SQ-M2/M1
LP-EC-SQ-H1
82
Threesidelightemitting,snapin,roundshapeddiffuserwithdelicaterifflesunderneedthesurface.
Theprofileiscompletely“LEDsDOTSFREE”andcomeswithfrosted,UVresistantdiffuseronly.Theprofiledeliversoftdiffusedlight,canaccommodatethestandardledstripesmidpowerupto16mmofwideness.TherightselectedaluminumalloybodyisperformingastheheatsinktotheLEDsdeliveringpropercooling.TheprofileisdedicatedforsurfaceinstallationbythestandardST3,5mmselfthreatscrew.TheAlu-Sqereisfinishbythededicatedaluminumendcapsinstalledbythetwoscrewsontheside.Alltogethernicediffuser,qualityaluminumbaseandaluminumendcapsbringthequalityandtheprofessionallook.
O
A SQUA RO O
8
step 1 step 2 step 3 step 4
7
36,6
3x 12,20 2,20
11,
10
44,80
R23
0
ST2.2
SLW10LEDPROFILESLW x 4 mm triple row l d profile
FUTURES:
• Triplerowledstripeprofileupto36,6mm• Slimdesignonly11mmhigh• Threetypessnapinhighquality
UVresistantdiffusers• Highqualityanodizingsurface• Directinstallationwiththesurface
bytheST2,2mmscrews• Aluminumendcaps
84
LP-EC-SLW10-H1
LP-AL-SLW10-M2/K2
Superwidealuminumprofilewiththe36,6mmspacefortheextrawideLEDstripesorthetriplerowofstandard12mmLEDstripes.
ItislowdesignwiththealuminumbodydirectlyscrewingtothesurfacebytheST2,2x9,5mmselfthreatscrews.AlmostflatsnapinUVresistantdiffuserisprovidingqualityfinishtothisLEDlamp.Theprofilesisavailablewiththreedifferenttypesofthelightdiffusers,frosted,50%frostedandtransparent.SLW10LEDprofileisalsoequippedwithstylishaluminumendcapsscrewedwiththeprofile.
O
S 0E I R
8
step 1 step 2 step 3 step 4
27
50
33 8
22 55
WALL LED LAMP ;
FUTURES:
• Decorative modern design Wall LED lamp• Great heat dissipation for high power led stripes up to 30W/m• Two side LED light output• Very fi ne anodizing surface• Matching installation/hiding base for power supply• Aluminum accessories
131
LP-EC-WLL
LP-AL-WLL
86
Decorative wall installed LED profi le with two
direction light outputs up and down. Quality
fi nish and very fi ne anodizing surface give you the
chance to build up LED lamp what you can hang
on in walking areas such as hotel hallways, cinemas,
restaurants, lobby. The lamp can be powered by two
high power singe color or RGB LED stripes. Great
heat dissipation allow to use high power LEDs up
to 30W/m. Installation to the wall is made thru
the installation base which working as the hiding
housing for the power supply. Wall LED Lamp and
the base are sale in 2m units for future cut.
DES IO
LU RE OF E U
step 1 step 2 step 3 step 4
LP-AL-BA
LP-EC-WLL
87