PATENT PENDING 4th Generation · Flow Management Devices’ 4th Generation Unidirectional Captive...
Transcript of PATENT PENDING 4th Generation · Flow Management Devices’ 4th Generation Unidirectional Captive...
UniDirectional Captive Displacement Prover
+1.602.233.9885 • E: [email protected] • www.flowmd.com
Flow Management Devices’ 4th Generation Unidirectional Captive Displacement Prover raises the bar for Small Volume Provers
4th GenerationPATENT PENDING
4th Generation Prover Upgrades Include:
The newly designed drive end reduces mass by close to 40%.
Less Flow Disturbance
The redesign of the piston and poppet assembly increases measurement volume
while providing smoother operation.
Improved Serviceability & Safety Decreased Weight
Seal changes are simplified by readily accessible piston and poppet.
*Davit arm option available
Longer seal life, fewer parts and less weight allows for ease of servicing.
Observation windows added as a safety feature to allow visual access to the drive end.
• Uncertainty: - Typically exceeds 0.005% • Repeatability: - ISO Cal Lab exceeds 0.02%
• Conforms to API 4.2 and API 4.6
• Easily handles heavy crude
• All wetted parts stainless/PTFE
• Galvanized frame per ASTM A123/123M-02
• Smooth belt drive with clutch
• Metric detector bar option
• Shock mounted isolation pads for independent drive and support
• 3 point installation for secure mounting on uneven surfaces
• 2” connections allow for rapid draining (FMD025 to 245)
• 2” vents for pressure and temp verification (FMD025 to 245)
• Prover validation /self-test function
• Four year warranty
• Decreased overall weight and redesigned piston and poppet assembly allows for minimal flow disturbance • Increased run-up time provides better accuracy for proving manufactured pulse meters
• All stainless steel drive system • 4th Gen PIM with upgraded features
Advantages of FMD Provers:
NON_CONTROLED DOCUMENT
F L O W M A N A G E M E N T D E V I C E S , L L C 5225 South 37th St, Suite 4, Phoenix AZ 85040 • Phone (602) 233-9885 • Fax (602) 233-9887 • Website: www.FlowMD.com
4 T H G E N E R A T I O N P R O V E R C O N F I G U R A T I O N NOT ALL CONFIGURATIONS SHOWN ON THIS TABLE ARE AVAILABLE – CONSULT FACTORY
A B C D D D (E E) F G H I J K L M N O O O O
Structural Components [B] 4 = 304, & galvanized frame 6 = 316 & galvanized frame 8 = 316 & stainless frame (Note: Can contain other materials.)
Wetted Components [C] 4 = 304 6 = 316
Max Flow Rate [DDD] 001 = 100gpm (142BPH) [23m3/hr] 003 = 300gpm (428BPH) [68m3/hr] 007 = 700gpm (1,000BPH) [150m3/hr] 015 = 1,500gpm (2,100BPH) [330m3/hr] 025= 2,500gpm (3,570BPH) [560m3/hr] 035 = 3,500gpm (5,000BPH) [790m3/hr] A35 = 3,500gpm (5,000BPH) [790m3/hr] 045= 4,500gpm (6,500BPH) [1,022m3/hr] 060 = 6,000gpm (8,500BPH) [1,350m3/hr]
090 = 9,000gpm (12,850BPH) [2,000m3/hr]
130 = 13,000gpm (18,500BPH) [2,900m3/hr]
200 = 20,000gpm (28,500BPH) [4,500m3/hr]
245 = 24,500gpm (35,000BPH) [5,565m3/hr]
Tube Finish [M] W = Wrap (Standard) N = Natural Finish P = Painted (To customer specification. If none supplied, it will be painted per FMD paint specification) **Consult factory prior to selecting ‘P’ option
Flange Configuration [(EE)] (RR) = Right in - Right out (RL) = Right in - Left out (RT) = Right in - Top out (4A) = 4 Flange (LL) = Left in - Left out (LR) = Left in - Right out (LT) = Left in - Top out (TT) = Top in – Top out (TR) = Top in – Right out
Pressure Class [F] 1 = ANSI 2 = PED
Motor Voltage [L] A = 24 VDC (001-060) B = 110-120 VAC 1ph (001-090) C = 220/230/240 VAC 1 phase (001-090) D = 190/208-230/240 VAC 3 Phase (*) F = 380/400/415 VAC 3 Phase (*) I = 440/460/480 VAC 3 Phase (*) M = Hydraulic *Please note Delta or Wye configuration on 3 phase
Frequency [K] A = DC B = 50 Hz C = 60 Hz
Area Classification [J] E = US/CSA Class 1 Div 1 40°C G = US/CSA Class 1 Div 2 40°C J = ATEX Ex d mb [ia] IIB T3 Gb -20° to 40°C K = IECEx Ex d mb [ia] IIB T3 Gb -20° to 40°C
Covers Type [I] S = Standard (Quick Access) P = Purge ( ≤ -20°F Product)
Pressure Rating [H] PER ASME B16.5(B16.5M) TABLE 2-1.1 -20 TO 100°F (-29 TO 38°C) A = 150# = 285PSI (19.6BAR) B = 300# = 740PSI (51.1BAR) C = 600# = 1480PSI (102.1BAR) D = 900# = 2220PSI (153.2BAR) E = 1500# = 3705PSI (255.3BAR)
Flange Type [G] A = Raised Face B = Ring Joint
Special Options [O...] Consult factory Leave blank if none
Prover Type [A] H = Horizontal V = Vertical
Seal Material [N] E = Ekonal C = Carbon
5225 South 37th Street - Suite 4 - Phoenix, AZ 85040+1.602.233.9885 • [email protected] • www.flowmd.com
FMD 4th Generation Prover - Model Information
Contact Us Today to Discuss your Proving Application
FMD-UCDP 4th Generation Data Sheet 1.23 02-18 Copyright 2018 - All rights reserved
“Improving liquid and gas measurement technology “