Part5 Stress Analysis Report 12-24-2012

Stress Analysis Report

Analyzed File: Part5.ipt

Autodesk Inventor Version: 2012 (Build 160160000, 160)

Creation Date: 12/24/2012, 9:03 AM

Simulation Author: D13

Summary:

Project Info (iProperties)

Summary

Author D13

Project

Designer D13

Cost $0.00

Date Created 12/24/2012

Status

Design Status WorkInProgress

Physical

Material Default

Density 1 g/cm^3

Mass 0.304458 kg

Area 45618.7 mm^2

Volume 304458 mm^3

Center of Gravity

x=-58.5263 mm

y=27.1735 mm z=30 mm

Note: Physical values could be different from Physical values used by FEA reported below.

Simulation:1

General objective and settings:

Design Objective Single Point

Simulation Type Static Analysis

Last Modification Date 12/24/2012, 9:01 AM

Detect and Eliminate Rigid Body Modes No

Advanced settings:

Avg. Element Size (fraction of model diameter) 0.1

Min. Element Size (fraction of avg. size) 0.2

Grading Factor 1.5

Max. Turn Angle 60 deg

Create Curved Mesh Elements Yes

Material(s)

Name Stainless Steel

General

Mass Density 8.08 g/cm^3

Yield Strength 250 MPa

Ultimate Tensile Strength 0 MPa

Stress

Young's Modulus 193 GPa

Poisson's Ratio 0.3 ul

Shear Modulus 74.2308 GPa

Stress Thermal

Expansion Coefficient 0.0000104 ul/c

Thermal Conductivity 16 W/( m K )

Specific Heat 477 J/( kg c )

Part Name(s) Part5

Operating conditions

Force:1

Load Type Force

Magnitude 100.000 N

Vector X 0.000 N

Vector Y -100.000 N

Vector Z -0.000 N

Selected Face(s)

Fixed Constraint:1

Constraint Type Fixed Constraint

C:/Users/D13/Documents/Images/Content/0/Load_0_1.pngC:/Users/D13/Documents/Images/Content/0/Load_0_1_rev.png

Selected Face(s)

Results

C:/Users/D13/Documents/Images/Content/0/Constraint_0_0.pngC:/Users/D13/Documents/Images/Content/0/Constraint_0_0_rev.png

Reaction Force and Moment on Constraints

Constraint Name Reaction Force Reaction Moment

Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)

Fixed Constraint:1 100 N

0 N

11.5999 N m

0 N m

100 N 0 N m

0 N -11.5999 N m

Result Summary

Name Minimum Maximum

Volume 304458 mm^3

Mass 2.46002 kg

Von Mises Stress 0.00619055 MPa 4.55533 MPa

1st Principal Stress -1.67609 MPa 6.06774 MPa

3rd Principal Stress -6.5515 MPa 1.74699 MPa

Displacement 0 mm 0.0074385 mm

Safety Factor 15 ul 15 ul

Stress XX -2.5293 MPa 2.34442 MPa

Stress XY -1.44097 MPa 1.27074 MPa

Stress XZ -0.716677 MPa 0.627682 MPa

Stress YY -5.9701 MPa 5.59396 MPa

Stress YZ -1.60535 MPa 1.63946 MPa

Stress ZZ -2.22515 MPa 2.22077 MPa

X Displacement -0.00218014 mm 0.000257806 mm

Y Displacement -0.00736205 mm 0.000361599 mm

Z Displacement -0.000060446 mm 0.0000622336 mm

Equivalent Strain 0.0000000281091 ul 0.0000229517 ul

1st Principal Strain -0.0000000645952 ul 0.0000250793 ul

3rd Principal Strain -0.000027569 ul -0.0000000243852 ul

Strain XX -0.00000960478 ul 0.00000756511 ul

Strain XY -0.00000970604 ul 0.00000855938 ul

Strain XZ -0.00000482736 ul 0.00000422791 ul

Strain YY -0.0000236528 ul 0.0000224067 ul

Strain YZ -0.0000108133 ul 0.000011043 ul

Strain ZZ -0.00000729276 ul 0.00000845398 ul

Figures

Von Mises Stress

1st Principal Stress

C:/Users/D13/Documents/Images/Content/0/Result_0_1.pngC:/Users/D13/Documents/Images/Content/0/Result_0_1_rev.png

3rd Principal Stress


Displacement


Safety Factor


Stress XX


Stress XY


Stress XZ


Stress YY


Stress YZ


Stress ZZ


X Displacement


Y Displacement


Z Displacement


Equivalent Strain


1st Principal Strain


3rd Principal Strain


Strain XX


Strain XY


Strain XZ


Strain YY


Strain YZ


Strain ZZ


C:\Users\D13\Documents\Imported Components\new\Part5.ipt


Part5 Stress Analysis Report 12-24-2012

Documents

Transcript of Part5 Stress Analysis Report 12-24-2012