Panels, Planks, Clouds, and Canopies
Transcript of Panels, Planks, Clouds, and Canopies
Ceiling&Wall SyStemS
B e t w e e n u s , i d e a s b e c o m e r e a l i t y ™
M E T A L W O R K S ™
Pane ls , P lanks , C louds , and Canop ies
2
M E T A L W O R K S ™ R H 2 0 0 C u s t o m C u r v e d
rhythmic
“
Product: MetalWorks™ RH200 Custom Curved extra microperforated in White
Project: Development Alternatives, Inc., Bethesda, MD
Architect: Interplan, Inc., Washington, DC
”
Development Alternatives, Inc.’s business is
centered on assisting developing countries
around the globe. The lifeblood of the many
villages and towns it supports is the local water
source, therefore, a major theme was the ‘River.’
The smooth rhythm of the ceiling suggested a
flowing river bringing the visitor or returning
traveler into the space. The fact that MetalWorks
ceiling panels are perforated and provide
excellent acoustics to these high traffic areas
made the selection that much easier.
Rob Jacobsen, AIA
Vice President
Interplan, Inc.
3
stimulating
M E T A L W O R K S ™ D H 7 0 0 C u s t o m
Product: MetalWorks™ DH700 Faceted Custom microperforated in Custom Colors
Project: Lyman Elementary School, Lyman, SC
Architect: McMillan Pazdan Smith Architecture
Spartanburg, SC
“We wanted to design a stimulating and fun
learning environment, so MetalWorks DH700
allowed us to replicate the sky from the tall
exterior windows in the cafetorium. The
perforated panels added acoustic quality while
the multiple shades of light blue provided
variation, producing a highly dramatic effect
with very little long-term maintenance for
the owner. Armstrong supported us with the
specifications and design details and also
came on site to provide the contractor with
pre-installation training. They were an invaluable
resource and made it an easy process.
Brian Deichman
Principal, Project Architect
McMillan Pazdan Smith Architecture
”
6
seamless
M E T A L W O R K S ™ R H 2 1 5 C e i l i n g s & C u s t o m M e t a l W H 1 1 0 0 W a l l s
Product: MetalWorks™ RH215 Custom Faceted Ceilings and Custom Metal WH1100 Walls with Rd 1522 perforation in Custom RAL 7024 finish
Project: Club Nokia at LA Live!, Los Angeles, CAArchitect: Gensler, Santa Monica, CA
“We chose the MetalWorks RH215 system to
create the ribbon-like form of our ceiling
because of its flexibility and ability to create a
seamless transition from ceiling to wall. The
range of available perforations enabled us to
select a pattern open enough to satisfy our
acoustical criteria and closed enough to create
the visual impression of a smooth surface. We
were able to select a very specific neutral color
that worked well within the palette of adjacent
finishes, but also served as an effective
backdrop for color changing LEDs located
throughout the space.
Jason Jones, AIA, LEED® AP
Associate
Gensler
”
7
f itt ing
M E T A L W O R K S ™ R a d i a l C u s t o m
Product: MetalWorks™ Radial Custom RH200 with Rd 1522 perforation in Silver Grey
Project: Pharmaceutical Research Institute, Andover, MA
Architect: MoharDesign LLC, Somerville, MA
“We needed to renovate an existing space that
was the shape of a semi-circle with glazed walls
and a pitched ceiling. The geometry and materials
posed major acoustical problems, which the
MetalWorks system solved beautifully. The
final design required custom fabrication of 90
segments, engineered to fit into a large 25' x 50'
puzzle. While we knew this was a huge
challenge, we were thrilled with the level of
service Armstrong provided while working very
closely with us to develop the solution. The client
is delighted and the conference room is so popular,
it’s in constant use.
Victoria Mohar, IIDA, LEED® AP
Director of Design & President
MoharDesign LLC
”
10
M E T A L W O R K S ™ R H 2 0 0 & C u s t o m M e t a l W H 1 1 0 0 W a l l s
engagingProduct: MetalWorks™ RH200 Custom Plank System
and Custom Metal WH1100 Walls unperforated and with Rv 2532 perforation in Custom RAL 9010
Project: Dubai International Airport Dubai, United Arab Emirates
Architect: Aéroport de Paris (ADPi), Paris, France
The curved ceiling is the highlight of the entire
complex. All materials achieved the quality
of the project and the finish is world class. The
vaulted ceiling even won an international award,
the highest CISCA award. Armstrong was heavily
involved in the design process and also engaged
in technical clarifications. As one of the leading
manufacturers of metal ceilings and walls, Armstrong
is capable of supplying large quantities at required
quality meeting program deadlines.
Bruce Neave
Project Director
Murray & Roberts
“
”
11
f lowing
M E T A L W O R K S ™ L i n e a r
Product: MetalWorks™ Linear microperforated in White
Project: Dallas Love Field Airport, Dallas, TX Architect: CH2M HILL, Dallas, TX
“ We were limited in terms of what we could use
because of the range of radii needed to
implement our design. We required a ceiling
material that offered flexibility and could be
installed relatively easily. The MetalWorks Linear
ceiling turned out to be the solution and it
allowed us to introduce more of an aerodynamic,
free-flowing look into the space. A ceiling can
make a big impact in public spaces. The new
baggage claim area at Love Field is proof.
Dan Hursin
Senior Architect
CH2M HILL
”
M E T A L W O R K S ™ V e c t o r ® F a c e t e d
14
A wave of knowledge… inspired by the curves
of the College’s logo, we designed the ceiling
as a wave that rises as you progress into the
space, peaking at the multi-story curtainwall,
maximizing views to the exterior.
MetalWorks Vector, in a faceted installation,
provided the optimal curve, excellent acoustics,
and a beautiful surface to carry the light from
the exterior into the space... an excellent
example of style meeting function. It was the
perfect cost-effective solution for this
application.
Emy Semprun
Interior Designer
Burt Hill
“
”
Product: MetalWorks™ Vector® Faceted microperforated in Silver Grey with Prelude® XL® 15/16" suspension system
Project: Tidewater Community College, Fred W. Beazley Portsmouth Campus, Portsmouth, VA
Architect: Burt Hill, Washington, DC
maximizing
15
M E T A L W O R K S ™ R H 2 0 0 C u s t o m E x t e r i o r
t imeless
“ Very early on in the design process, we knew
the choice of material for the ceiling and exterior
eave was going to be critical. The material had
to extend the design intent: a timeless look,
simply and elegantly detailed. It was a great
relief when we discovered MetalWorks
RH200.
Bryan Irwin, AIA, LEED® AP
Principal
Sasaki Associates, Inc.
Product: MetalWorks™ RH200 Custom Plank Exterior unperforated in Silver Grey
Project: Morgan State University LibraryBaltimore, MD
Architect: Design Architect – Sasaki Associates, Inc., Boston, MA
Architect of Record – Design Collective, Inc., Baltimore, MD
”
M E T A L W O R K S ™ T e g u l a r
18
M E T A L W O R K S ™ T e g u l a r
Product: MetalWorks™ Tegular 24" x 24" and 24" x 48" microperforated in Silver Grey with Suprafine® XL® 9/16" suspension system
Project: Shadow Hills High School, Indio, CAArchitect: Ruhnau Ruhnau Clarke, Carlsbad, CA
adaptable
“ We wanted to create a space where the patterned grid captures
one’s attention and draws you into the varying grid of the ceiling
as you enter the upper level of the tiered-seat lecture hall. The
MetalWorks Tegular ceiling created an interesting grid and detailed
pattern layout, which adapted with the lighting configuration,
maintained accessibility and performed acoustically, while still
capturing the contemporary finish and appearance we and our
client had envisioned for their new high school lecture hall.
Joseph A. Calderon, AIA
Design Architect
Ruhnau Ruhnau Clarke
”
19
20
Stainless Steel (SS)
Bronze (BZ)
Lacquer Mill (LMA)
Brushalume (BAA)
Wild Cherry (LWC)
Bright Anodized (BA)
Silverlume (SIA)
Light Cherry (LLC)
Nickel Chrome (NK)
Whitelume (WHA)
Rock Maple (LRM)
Natural Anodized (NA)
Gun Metal (MYA)
Ceiltex (CLA)
*Only available on Torsion Spring
Copper (CP)
Satin Anodized (SAA)
Tech Black (BL)
Gun Metal Grey (MY)
Effects Wood Looks Dark Cherry
(FXDC)
White (WH)
Effects™ Wood Looks
Maple (FXMP)
Effects Wood Looks Cherry (FXCH)
Effects Wood Looks
Walnut (FXWN)
Silver Grey (SG)
Mesh™ Colors
Standard Aluminum Colors
Bare Steel (TNA)
White (TWH) Chrome (TAM) Lacquered Steel (TLS)
Copper (TCP)
Tin Colors
Standard Colors
C O L O R S E L E C T i O n
RAL 1011 RAL 1012 RAL 1021RAL 1000 RAL 1001 RAL 2000
RAL 3001 RAL 3014 RAL 4005 RAL 4007 RAL 5001 RAL 5002 RAL 5012
RAL 6017
RAL 9001
RAL 1027 RAL 1033
RAL 3005
RAL 5018 RAL 6000RAL 5022 RAL 6004
RAL 7042 RAL 8023
RAL 6019 RAL 6032RAL 6027
RAL 7023 RAL 7031 RAL 8001 RAL 8003 RAL 8028
** Refer to CS-3957 for a sampling of Custom RAL colors. NOTE: Due to printing limitations, shade may vary from actual product.Custom RAL Colors**
Standard Painted Aluminum Reflections™ Laminate Finishes Ceiltex*
Product: MetalWorks™ Torsion Spring Custom Curved Ceiling System 30" x 82" planks with Rg 2516 perforation in Cream Weave finish
Project: John Wayne Airport, Santa Ana, CAArchitect: Gensler, Newport Beach, CA
21
P E R f O R A T i O n S E L E C T i O n * * Actual 1:1 scale shown unless otherwise noted.
M9 (103)
Hole Size: 2.9mm [.114"]
% Open Area: 24.4%
M5 (Lg 16032)
Hole Size: 2.0mm [.079"]
% Open Area: 32.0%
M10
Hole Size: 2.5mm [.098”]
% Open Area: 13.6%
3.0mm[.118"]
2.01mm[.079"]
5.0mm[.197"]
19.99mm[.787"]
3.99mm[.157"]
16.0mm[.630"]
SCALE: 1:1
SCALE: 1:16.5mm[0.256"]
6.5m
m[0
.256
"]
M11 (107)
PATTERN TYPE: Round-StraightHOLE SIZE: 4.1mm [.157"]% OPEN AREA:26.9%
Rg 1511
Hole Size: 1.5mm [.059"]
% Open Area: 11.0%
Rg 4022
Hole Size: 4.0mm [.157"]
% Open Area: 22.0%
SCALE: 1:17.5mm[0.295"]
7.5m
m[0
.295
"]
Rg 4022PATTERN TYPE: Round-StraightHOLE SIZE: 4.0mm [.157"]% OPEN AREA:22.0%
Rg 14023
Hole Size: 14.0mm [.551"]
% Open Area: 23.0%
Rg 2516
Hole Size: 2.5mm [.098"]
% Open Area: 16.0%
Rg 3027
Hole Size: 3.0mm [.118"]
% Open Area: 27.0%
Rg 2504
Hole Size: 2.5mm [.098"]
% Open Area: 4.0%
Type: Square-Straight Slotted Type: Round-Staggered
Type: Round-Straight
M3Extra Microperforated (Rg 0701)
Hole Size: 0.7mm [.028"] % Open Area: 1.5%
Type: Round-Diagonal Type: Round-Straight
Standard Steel Perforations
Premium Steel Perforations
** Additional perforation options are available for premium and custom systems.
Type: Round-Straight
Type: Round-Straight
Type: Square-StraightType: Round-Diagonal
M13 (136)
Hole Size: 10.0mm x 10.0mm
[.394" x .394"]
% Open Area: 59.2%
Custom Steel Perforations
Rv 4625
Hole Size: 4.6mm [.181"]
% Open Area: 25.0%
SecureLock Plus (P5)
Hole Size: 3.1mm [.125"]
% Open Area: 22.7%
Rg 1821
Hole Size: 1.8mm [.071"]
% Open Area: 21.0%
Rv 2523
Hole Size: 2.5mm [.098"]
% Open Area: 23.0%
Type: Round-Staggered
M4 (Rv 4058)
Hole Size: 4.0mm [.157"]
% Open Area: 58.0%
8.7mm[0.341"]
4.3mm[0.171"]
5.0m
m[0
.197
"]2.
5mm
[0.0
99"]
60˚
SCALE: 1:1SCALE: 1:1
3.5mm[0.138"]
3.5m
m[0
.138
"]
Rg 1821PATTERN TYPE: Round-StraightHOLE SIZE: 1.8mm [.071"]% OPEN AREA:21.0%
Scale: 50% of actual size
SCALE: 1:15.5mm[0.217"]
5.5m
m[0
.217
"]
M10PATTERN TYPE: Round-StraightHOLE SIZE: 2.5mm [.098"]% OPEN AREA:13.6%
SCALE: 1:14.3mm[0.169"]
2.1mm[0.084"]
4.3m
m[0
.169
"]2.
1mm
[0.0
85"]
90°
M2 Microperforated (Rd 1518)
PATTERN TYPE: Round-DiagonalHOLE SIZE: 1.5mm [.059"]% OPEN AREA:18.4%
7.13mm[0.281"]
10.1
1mm
[0.3
984"
]5.
05m
m[0
.199
"]
SCALE: 1:1
P4
PATTERN TYPE: Round-DiagonalHOLE SIZE: 2.76mm [.109"]% OPEN AREA:13.6%
5.0mm[0.197"]
SCALE: 1:1
5.0m
m[0
.197
"]
M3 Extra Microperforated (Rg 0701)
PATTERN TYPE: Round-StraightHOLE SIZE: 0.7mm [.028"]% OPEN AREA:1.5%
SCALE: 1:16.4mm[0.250"]
3.2mm[0.125"]
11.0
mm
[0.4
33"]
5.5m
m[0
.217
"]
60°
M9 (103)
PATTERN TYPE: Round-StaggeredHOLE SIZE: 2.9mm [.114"]% OPEN AREA:24.4%
SCALE: 1:15.0mm[0.197"]
5.0m
m[0
.197
"]2.
5mm
[0.0
98"]
2.5mm[0.099"]
90°
M12 (132)
PATTERN TYPE: Round-DiagonalHOLE SIZE: 1.8mm [.071"]% OPEN AREA:20.8%
4.0mm[0.157"]
4.0m
m[0
.157
"]
SCALE: 1:1
Rg 1511PATTERN TYPE: Round-StraightHOLE SIZE: 1.5mm [.059"]% OPEN AREA:11.0%
SCALE: 1:110.0mm[0.394"]
10.0
mm
[0.3
94"]
13.0
mm
[0.5
13"]
13.0mm[0.513"]
M13 (136)
PATTERN TYPE: Square-StraightHOLE SIZE: 10mm x 10mm [.394" x .394"]% OPEN AREA:59.2%
SCALE: 1:15.5mm[0.217"]
5.5m
m[0
.217
"]
Rg 2516PATTERN TYPE: Round-StraightHOLE SIZE: 2.5mm [.098"]% OPEN AREA:16.0%
SCALE: 1:15.2mm[0.203"]
5.2m
m[0
.203
"]
Rg 3027PATTERN TYPE: Round-StraightHOLE SIZE: 3.0mm [.118"]% OPEN AREA:27.0%
SCALE: 1:111.0mm[0.433"]
11.0
mm
[0.4
33"]
Rg 2504PATTERN TYPE: Round-StraightHOLE SIZE: 2.5mm [.098"]% OPEN AREA:4.0%
SCALE: 1:110.8mm0.425"] 5.4mm
[0.212"]
12.3
mm
[0.4
86"]
6.2m
m[0
.243
"]
82°
Rv 4625PATTERN TYPE: Round-StaggeredHOLE SIZE: 4.6mm [.181"]% OPEN AREA:25.0%
SCALE: 1:112.7mm[0.5"]
6.35
mm
[0.2
5"]
3.1m
m[0
.125
"]
PATTERN TYPE: Round-StaggeredHOLE SIZE: 3.1mm [.125"]% OPEN AREA:22.7%
SecureLockPlus (P5)
SCALE: 1:17.3mm[0.286"]
3.6mm[0.143"]
4.2m
m[0
.165
"]2.
1mm
[0.0
83"]
60°
Rv 2523PATTERN TYPE: Round-StaggeredHOLE SIZE: 2.5mm [.098"]% OPEN AREA:23.0%
M2Microperforated (Rd 1518)
Hole Size: 1.5mm [.059"]
% Open Area: 18.4%
P4 SecureLock™
Microperforated
Hole Size: 2.76mm [.109"] % Open Area: 23.5%
M11 (107)
Hole Size: 4.1mm [.157”]
% Open Area: 26.9%
M12 (132)
Hole Size: 1.8mm [.071"]
% Open Area: 20.8%
Lg 42003
Hole Size: 42.0mm x 2.0mm
[4.724" x .079"]
% Open Area: 3.0% or Varies
Tv 26845
Hole Size: 26.8mm x 9.0mm
[1.102" x .354"]
% Open Area: 45.0%
Scale: 50% of actual size
Type: Oval-Straight SlottedType: Trapezoid-Staggered
Scale: 50% of actual size
Custom Steel Perforations (cont.)
Rd 1511
Hole Size: 1.5mm [.059"]
% Open Area: 11.0%
Rd 1522
Hole Size: 1.5mm [.059"]
% Open Area: 22.0%
Rd 2508
Hole Size: 2.5mm [.098"]
% Open Area: 8.0%
Rd 2535
Hole Size: 2.5mm [.098"]
% Open Area: 35.0%
Type: Round-Diagonal
M6 {Qg 4025)
Hole Size: 4.0mm x 4.0mm
[.157" x .157"]
% Open Area: 25.0%
Qg 20018
Hole Size: 20.0mm x 20.0mm
[.787" x .787"]
% Open Area: 18.0%
SCALE: 1:1
4.0m
m[0
.157
"]8.
0mm
[0.3
15"]
Type: Square-Straight
Rd 3013
Hole Size: 3.0mm [.118"]
% Open Area: 13.0%
Rd 3019
Hole Size: 3.0mm [.118"]
% Open Area: 19.0%
SCALE: 1:110.3mm[0.406"]
5.2mm[0.203"]
10.3
mm
[0.4
06"]
5.2m
m[0
.203
"]90°
Rd 3013PATTERN TYPE: Round-DiagonalHOLE SIZE: 3.0mm [.118"]% OPEN AREA:13.0%
Lg 25042
Hole Size: 25.0mm x 3.0mm
[.984" x .118"]
% Open Area: 42.0% or Varies
5.0m
m[0
.197
"]3.
0mm
[0.1
18"]
VARIES
SCALE: 1:125.0mm[0.984"] 10.0mm
[0.394"]MINIMUM
Lg 25042PATTERN TYPE: Oval-StraightHOLE SIZE: 25mm x 3mm[.984" x .118"]% OPEN AREA:42.0% or Varies
Scale: 50% of actual size
22
SCALE: 1:142.0mm[1.654"]
37.0
mm
[1.4
57"]
2.0m
m[0
.079
"]
VARIES
10.0mm[0.394"]
MINIMUM
Lg 42003PATTERN TYPE: Oval-StraightHOLE SIZE: 42mm x 2mm[4.724" x .079"]% OPEN AREA:3.0% or Varies
Rd 4011
Hole Size: 4.0mm [.157"]
% Open Area: 11.0%
Rd 4006
Hole Size: 4.0mm [.157"]
% Open Area: 6.0%
Rd 3139
Hole Size: 3.1mm [.122"]
% Open Area: 39.0%
Rd 3025
Hole Size: 3.0mm [.118"]
% Open Area: 25.0%
Rd 1506
Hole Size: 1.5mm [.059"]
% Open Area: 6.0%
SCALE: 1:14.0mm[0.157"]
8.0mm[0.315"]
8.0m
m[0
.315
"]4.
0mm
[0.1
57"]
90°
Rd 1506PATTERN TYPE: Round-DiagonalHOLE SIZE: 1.5mm [.059"]% OPEN AREA:6.0%
Rd 1810
Hole Size: 1.8mm [.071"]
% Open Area: 10.0%
SCALE: 1:17.0mm[0.276"]
3.5mm[0.138"]
7.0m
m[0
.276
"]3.
5mm
[0.1
38"]
90°
Rd 1810PATTERN TYPE: Round-DiagonalHOLE SIZE: 1.8mm [.071"]% OPEN AREA:10.0%
Qg 12515
Hole Size: 12.5mm x 12.5mm
[.492" x .492"]
% Open Area: 15.0%
Scale: 50% of actual size
Qd 10059
Hole Size: 10.0mm x 10.0mm
[.394" x .394"]
% Open Area: 59.0%
SCALE: 1:112.5mm[0.492"]
12.5
mm
[0.4
92"]
32.0mm[1.260"]
32.0
mm
[1.2
60"]
Qg 12515PATTERN TYPE: Square-StraightHOLE SIZE: 12.5mm x 12.5mm[.492" x .492"]% OPEN AREA:15.0%
Qg 20034
Hole Size: 20.0mm x 20.0mm
[.787" x .787"]
% Open Area: 34.0%
Scale: 50% of actual size
SCALE: 1:15.7mm[0.223"]
2.8mm[0.111"]
5.7m
m[0
.223
"]2.
8mm
[0.1
11"]
90°
Rd 1511PATTERN TYPE: Round-DiagonalHOLE SIZE: 1.5mm [.059"]% OPEN AREA:11.0%
SCALE: 1:14.0mm[0.157"] 2.0mm
[0.079"]
4.0m
m[0
.157
"]2.
0mm
[0.0
79"]
90°
Rd 1522PATTERN TYPE: Round-DiagonalHOLE SIZE: 1.5mm [.059"]% OPEN AREA:22.0%
SCALE: 1:15.5mm[0.217"]
11.0mm[0.434"]
11.0
mm
[0.4
34"]
5.5m
m[0
.217
"]
90°
Rd 2508PATTERN TYPE: Round-DiagonalHOLE SIZE: 2.5mm [.098"]% OPEN AREA:8.0%
SCALE: 1:12.6mm[0.104"]
5.3mm[0.209"]
5.3m
m[0
.209
"]2.
6mm
[0.1
04"]
90°
Rd 2535PATTERN TYPE: Round-DiagonalHOLE SIZE: 2.5mm [.098"]% OPEN AREA:35.0%
SCALE: 1:17.5mm[0.295"]
3.7mm[0.148"]
7.5m
m[0
.295
"]3.
7mm
[0.1
48"]
90°
Rd 3019PATTERN TYPE: Round-DiagonalHOLE SIZE: 3.0mm [.118"]% OPEN AREA:19.0%
SCALE: 1:13.1mm[0.123"]
6.3mm[0.246"]
6.3m
m[0
.246
"]3.
1mm
[0.1
23"]
90°
Rd 3139PATTERN TYPE: Round-DiagonalHOLE SIZE: 3.1mm [.122"]% OPEN AREA:39.0%
SCALE: 1:110.0mm[0.394"]
20.0
mm
[0.7
87"]
10.0
mm
[0.3
94"]
90°
Rd 4006PATTERN TYPE: Round-DiagonalHOLE SIZE: 4.0mm [.157"]% OPEN AREA:6.0%
20.0mm[0.787"]
SCALE: 1:13.8mm[0.149"]
7.5mm[0.296"]
7.5m
m[0
.296
"]3.
7mm
[0.1
48"]
90°
Rd 3025PATTERN TYPE: Round-DiagonalHOLE SIZE: 3.0mm [.118"]% OPEN AREA:25.0%
SCALE: 1:110.0mm[0.394"]
10.0
mm
[0.3
94"]
13.0
mm
[0.5
12"]
13.0mm[0.512"]
Qg 10059PATTERN TYPE: Square-StraightHOLE SIZE: 10mm x 10mm[.394" x .394"]% OPEN AREA:59.0%
23
Scale: 50% of actual size
Standard Aluminum Perforations
M14 (Rg 3205)
Hole Size: 3.18mm [.125"]
% Open Area: 5.0%
12.7mm[0.500"]
12.7
mm
[0.5
00"]
3.18
mm
[0.1
25"]
SCALE: 1:1
M19 (Rg 3220)
Hole Size: 3.2mm [.125"]
% Open Area: 20.0%6.
35m
m[0
.250
"]
6.35mm [0.250"]
SCALE: 1:1
3.18
mm
[0.1
25"]
Rg 1421
Hole Size: 14.224mm [.56"]
% Open Area: 21.0%
M15 (Rd 1612)
Hole Size: 1.6mm [.063"]
% Open Area: 12.0%
45˚
5.74
mm
[0.2
26"]
5.74mm[0.226"]
4.06mm[0.160"]
SCALE: 1:1
1.6m
m[0
.063
"]
Type: Round-Straight
Type: Round-Diagonal Type: Round-Staggered
Lv 25422
Hole Size: 3.175mm x
25.4mm [.125" x 1.0"]
% Open Area: 22.0%
Qg 1945
Hole Size: 19.04mm [.75"]
% Open Area: 45.0%
12.7
mm
[0.5
00"]
28.58mm[1.125"]
3.18mm [.125"] x 25.4mm [1.0"] rectangular perforation@ 28.58mm [1.125"] C/C end staggered
SCALE: 1:1
19.05mm [.750"] square hole@ 28.58 [1.125"] O.C.
28.5
8mm
[1.1
25"]
19.05mm[.750"]
19.0
5mm
[.750
"]
28.58mm[1.125"]
SCALE: 1:1
Type: Rectangle-Straight
Type: Oval-Straight
M16 (Rd 1607)
Hole Size: 1.6mm [.063"]
% Open Area: 7.0%
M17 (Rv 3223)
Hole Size: 3.2mm [.125"]
% Open Area: 23.0%
7.54
mm
[0.2
97"]
7.54mm[0.297"] 5.33mm
[0.210"]
1.60
mm
[0.0
63"]
45˚
SCALE: 1:1
6.35
mm
[0.2
50"]
3.18
mm
[0.1
25"]
3.18
mm
ø [0
.125
"]
11mm[0.433"]
5.51mm [0.217"]
SCALE: 1:1
Rd 1242
Hole Size: 12.7mm [.50”]
% Open Area: 42.0%
12.7mm [.500"] diameter hole@ 17.45mm [.687"] staggered C/C
24.69mm[0.972"]
24.6
9mm
[0.9
72"]
SCALE: 1:1
17.45mm[0.687"]
M18 (Rd 3210)
Hole Size: 3.2mm [.125"]
% Open Area: 10.0%
12.7
mm
[0.5
00"]
12.7mm[0.500"]
8.99mm[0.354"]
3.18
mm
[0.1
25"]
SCALE: 1:1
45˚
12.7
mm
[0.5
00"]
28.58mm[1.250"] 6.35mm
[0.250"]
3.18mm [.125"] x 25.4mm [1.0"] rectangular perforation@ 31.75mm [1.25"] C/C
SCALE: 1:1
Lg 25420
Hole Size: 3.175mm x
25.4mm [.125" x 1.0"]
% Open Area: 20.0%
Qg 1216
Hole Size: 12.7mm [.50"]
% Open Area: 16.0%
Lg 42003
Hole Size: 42.0mm x 2.0mm
[4.724" x .079"]
% Open Area: 3.0% or Varies
31.7
5mm
[1.1
95"]
31.75mm[1.195"]
12.7
mm
[0.5
00"]
squa
re p
erfo
ratio
n@
31.
75m
m [1
-1/4
"] C
/C
SCAL
E: 1
:1
SCALE: 1:142.0mm[1.654"]
37.0
mm
[1.4
57"]
2.0m
m[0
.079
"]
VARIES
10.0mm[0.394"]
MINIMUM
Lg 42003PATTERN TYPE: Oval-StraightHOLE SIZE: 42mm x 2mm[4.724" x .079"]% OPEN AREA:3.0% or Varies
Scale: 50% of actual size
Scale: 50% of actual size
Scale: 50% of actual size
Type: Square-Straight
Make a memorable statement
with metal – curves, clouds,
planes…standard and custom
choices to make your
ideas reality.
Other MetalWorks options available from Armstrong.
Visit armstrong.com/metalworks to explore our portfolio.
MetalW
orks 3DM
etalWorks M
esh™
MetalW
orks™
Tin
M E T A L W O R K S ™ P a n e l s , P l a n k s , C l o u d s , a n d C a n o p i e s
K e y S e l e c t i o n A t t r i b u t e s
° Industry’s broadest range of standard Linear, Plank, and 24" x 24" Vector®, Tegular, Torsion Spring, Snap-in, Mesh™, Tin, and Open Cell panels
° Flat and curved options available for standard and custom panels
° Standard Canopies, Wings, and other kitted cloud solutions
° Durable – washable, scrubbable, soil-resistant
° Steel and aluminum
° NRC up to 0.85 available with standard perforations
° Enhance acoustics and aesthetics with a variety of custom round, square, and oval perforation choices
° Multiple accessibility options
° Third-party certified exterior application wind uplift capabilities (Class 30, 60, 90) for Linear and Vector 24" x 24" panels
° Engineered and tested for use in seismic zones
° Class A fire performance – paneled metals
° Short lead times and local distribution available
° Custom metal walls available in multiple sizes, perforations, and finishes to coordinate with ceilings and other interior finishes
° Dedicated project team for specialty ceiling design and support; contact Architectural Specialties for more information at 877 ARMSTRONG, select options 1-1-4
a r m s t r o n g . c o m / m e t a l w o r k s
° Standard and custom product information
° Real-time selection and specification tools
° Contacts – reps, where to buy, who will install
° Online catalog, submittal pages, and CAD details
1 8 7 7 A R M S T R O N G ( 2 7 6 - 7 8 7 6 )
° Name of your Armstrong Representative
° TechLine – Technical information, detail drawings, CAD design assistance, installation information, other technical services – 8 a.m. to 5:30 p.m. EST, Monday through Friday, FAX 1-800-572-8324 or email: [email protected]
° Product literature and samples – Try Swatch It on the web
Online tool that allows you to visually create MetalWorks and WoodWorks ceiling and wall swatches – color, perforation, and pattern – watch as your swatch comes to life! armstrong.com/swatchit
Cover Image: Product: MetalWorks™ Snap-in 20" x 60"
Interior and Exterior Ceiling Systems with M16 perforation in Silverlume Project: Irving Convention Center
at Las Colinas, Irving, TXArchitect: RMJM, New York, NY
TechLineSM / 1 877 ARMSTRONG
1 877 276 7876
armstrong.com/metalworks
BPCS-4164-114
LEED® is a registered trademark of the U.S. Green Building Council All other trademarks used herein are the property of AWI Licensing Company and/or its affiliates© 2014 AWI Licensing Company • Printed in the United States of America