Dunphy prefabricated, packaged plant rooms are containerised

energy centres manufactured off-site in our factory complex in Rochdale.

We have extensive experience in building Plant Rooms using biogas, liquid

biofuels, recovered organic waste derived fuels, biodiesel and fossil fuels.

We are not tied to any specific boiler maker and are therefore free to select the

most cost efficient shell for each specific site operation.

PACKAGED PLANT ROOMS

Dunphy clients always have direct contact with our engineers

throughout project design, manufacture, site link-up and

subsequent ongoing service support and maintenance - bypassing

the alternative lengthy, third party contractual chain.

We prepare all FDS reports, DSEAR analyses and SIL assessments.

Dunphy plant rooms are

delivered fully assembled

to site where

commissioning is carried

out by our team of

experienced mechanical

and electrical engineers.

Consider a packaged or

containerised boiler house

if

✦ space is at a premium

✦ on-site construction would be expensive or disruptive

✦ a biomass or liquid biofuel system is being installed to complement an existing traditional boiler house

✦ a high spec energy centre is

needed for a new development

Our resourcesDunphy’s manufacturing complex houses three purpose built factories and test

centres on a 10 acre site just off the M62 in Rochdale.

The prefabrication production unit provides a vast, clear span, unobstructed

interior for the assembly and testing of all types and sizes of packaged plant

rooms. Large entrance canopies allow transporters easy access for loading units

for delivery to site.

Integrated design, manufacture and assemblyOur in-house designers produce detailed specifications and 3D CAD drawings of

the plant room components and final assembly then work in tandem with the

manufacturing engineers to build and assemble the unit. The burner is the critical

component in any Plant Room and we design and manufacture single and

multifuel axial air flow burners in our factory.

Our procurement engineers have extensive experience in sourcing best value

boilers, CHP engines, weatherproof container housing, piping, extraction and

ancillary items to ensure each individual site specification and budget is matched.

Before handover to clients, our commissioning engineers ensure that the Plant

Room is operating to specified turndown, modulation, output and emissions levels

and carry out all on-site training of client staff. A full after sales maintenance and

support programme is available.

Fuel and system testingWhere biofuels are being used as the main or supplementary fuel source, we test

the critical fuel characteristics to identify optimum levels of filtration, blending

and operating temperatures and refine the engineering designs to take account of

any calorific value differences and minimise levels of all harmful emissions.

Remote combustion control solutionsDunphyDelta provides remote monitoring and control of the boiler house via any

internet connected laptop, tablet or smart phone.

Alternatively, our suite of Ratiotronic software allows boiler and burner operations

to be monitored and managed either within the Plant Room or via remote access

from all standard PCs. Our control solutions ensure that multi-fuel changeovers

are performed safely, quickly and efficiently.

Our projects are completed safely, on time and to budget.

From concept to commissioning

Dunphy provides a full turnkey service

For further information, contact sharon.kuligowski@dunphy.co.uk

01706 649217 www.dunphy.co.uk