V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

OZCO Project #334 - 10x10x16 Corner Pergola

Pergola OZCO Project #334 - 10x10x16 Corner 1

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

CL

16'0"

7'4 1316 " 8' 11 16 " 8'8

3 8 "

12'8 14 "

1'4"

= =

2"

4 12 "

Overview 3OZCO Project #334 - 10x10x16 Corner

Pergola

9'2 18 "

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

15 19

17

16 14 13 10

20

3

23

2

22

851 21

24

18

9

6

11

12

425

7

Bill of Material 4OZCO Project #334 - 10x10x16 Corner

Pergola

ITEM NO. QTY. PART NUMBER DESCRIPTION

1 3 56608 6x6 Post Base Kit (6X6-PB-LS) 2 3 56610 8" Post to Beam (P2B-LS-8)

3 2 56617 2" Standard Rafter Clip (RC-LS-2)

4 1 56616 Flush Inside 45 (FI-45) 2 56611 Truss Accent (TA-LS) 1 56625 OWT Timber Screw 1-3/4"

5 3 6x6 Cedar Post 6x6x8'0" 6 2 2x8 Cedar Board 2x8x16'0" 7 1 2x8 Cedar Board 2x8x9'5 7/16" 8 1 2x6 Cedar Board 2x6x9'6 9/16" 9 2 2x4 Cedar Board 2x4x16'0" 10 1 2x4 Cedar Board 2x4x15'2 7/8" 11 1 2x4 Cedar Board 2x4x13'10 7/8" 12 1 2x4 Cedar Board 2x4x12'6 7/8" 13 1 2x4 Cedar Board 2x4x11'2 7/8" 14 1 2x4 Cedar Board 2x4x9'10 3/4" 15 1 2x4 Cedar Board 2x4x8'6 7/8" 16 1 2x4 Cedar Board 2x4x7'2 7/8" 17 1 2x4 Cedar Board 2x4x5'10 7/8" 18 1 2x4 Cedar Board 2x4x4'6 7/8" 19 1 2x4 Cedar Board 2x4x3'2 7/8" 20 2 2x6 Cedar Board 2x6x8'2 9/16" 21 2 2x6 Cedar Board 2x6x6'10 9/16" 22 2 2x6 Cedar Board 2x6x5'6 9/16" 23 2 2x6 Cedar Board 2x6x4'2 9/16" 24 2 2x6 Cedar Board 2x6x2'10 9/16" 25 1 2x8 Cedar Board 2x8x9'7 5/16"

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

56610

56608

OZCO 5OZCO Project #334 - 10x10x16 Corner

Pergola

56617

56625

56611

56616

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

Laredo Sunset & Ironwood

Laredo Sunset & Ironwood

6

2 great styles

Same functionality

choose your connection lifestyle

both styles available for most products

Ironwood (517XX series)

Laredo Sunset (566XX series)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

Suggested Tools (others may be required) OZCO Project #334 - 10x10x16 Corner Pergola

7

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

2x6 Cedar Board Rafters

(see template)

all lengths

2x4 Cedar Board Purlins

1 2 " X 45°

all lengths

Cutlist 8OZCO Project #334 - 10x10x16 Corner

Pergola

2x8 Cedar Board Side Beam

45°

9'5 716 "

2x8 Cedar Board Front Beams

(see template)

16'0"

2x8 Cedar Board Side Beam

45°

9'7 516 "

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

R3"

R2 12 "

2 12 "

1"

Template 2x6 1:1 scale

9OZCO Project #334 - 10x10x16 Corner Pergola

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

R2 12 "

R4 12 " 1"

2 12 "

Template 2x8 1:2 scale

10OZCO Project #334 - 10x10x16 Corner Pergola

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

12'8 14 "

2 716 "

2 716 "

6'7 916 " 45°

45°

mounting surface

if site is not level, see Ozco Site Leveling instruction

Locate desired center of structure

note post base 45 orientation

note post base 45 orientation

9'2 18 "

9'2 18 "

site 11OZCO Project #334 - 10x10x16 Corner

Pergola

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

step 1 OZCO Project #334 - 10x10x16 Corner Pergola

12

reference Overview page for dimensions (if needed)

Tool Required 3/8" Driver

(HCN)

(OWT Timber Screw)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

repeat on all posts

beam width

reference Overview page for dimensions (if needed)step 2 OZCO Project #334 - 10x10x16 Corner Pergola

13

Tool Required 3/8" Driver

(HCN)

(OWT Timber Screw)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

= =

step 3 OZCO Project #334 - 10x10x16 Corner Pergola

14

reference Overview page for dimensions (if needed)

Tool Required 3/8" Driver

(HCN)

(OWT Timber Screw)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

reference Overview page for dimensions (if needed)step 4 OZCO Project #334 - 10x10x16 Corner Pergola

15

Tool Required 3/8" Driver

(HCN)

(OWT Timber Screw)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

secure this end with nails or screws

step 5 OZCO Project #334 - 10x10x16 Corner Pergola

16

reference Overview page for dimensions (if needed)

CL

CL

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

1'4" center

to center

mounting surface

1 2

3 4

5 6 7 8

reference Overview page for dimensions (if needed)step 5 (con't) OZCO Project #334 - 10x10x16 Corner Pergola

17

repeat 8x

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

bevel edge is down secure with nails or screws

step 6 OZCO Project #334 - 10x10x16 Corner Pergola

18

reference Overview page for dimensions (if needed)

2"

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.

mounting surface

reference Overview page for dime