OWNER’S MANUAL RM6000ecx.images-amazon.com/images/I/A1KX0nJ2SHL.pdfWOOFER ON THE AMPLIFIER END –...

t h e s p e a k e r s p e c i a l i s t s®

O W N E R ’ S M A N U A L

RM6000SPEAKER SYSTEM

2 Contact Polk Audio Customer Service 1-800-377-7655, [email protected]

G E T T I N G S T A R T E D The RM6000 System carton should contain the following items:

Four (4) magnetically shielded satellite speakers One (1) magnetically shielded center channel speaker One (1) Powered Subwoofer Five (5) sets of four (4) “Bump Ons” (adhesive rubber feet), 20 totalOne (1) warranty card

Please inspect each loudspeaker carefully. Notify your Polk Audio dealer if you notice any difference, damage, or any missing items. Keep thecarton and packing material. They will do the best job of protecting your speakers if they need to be transported.

S P E A K E R P L A C E M E N T

CENTER CHANNEL SPEAKER (Figure 1)

Place the center channel speaker as close to your TV as possible in order to “anchor” dialogue and effects to the screen area. The most popularplacement for a center channel speaker is right on top of your TV set. It is also fine to place below the TV or on the wall directly above the TV;use the convenient keyhole slots on the rear of the speaker (see next section).

FRONT SATELLITES (Figure 2)

To provide ideal imaging, try to place the front satellites to the left and right of your TV about as far apart as the distance you are sitting fromthem. Avoid placing them less than 2 feet (60cm) from the side walls of the room. RM Satellites will sound great mounted on the wall on stands,bookshelves, or in entertainment centers. RM6000 satellites are easy to mount onthe wall using convenient keyhole slots built right in the backof the speakers. When mounting the speakers on stands or on a shelf, place them at or near your ear level. (Speaker stands appropriate for theRM6000 satellites are available at your Polk Audio dealer or in the Polk Webstore at www.polkaudio.tranguard.com.)

SURROUND SPEAKERS (Figures 3a, 3b)

The best placement for surround channel speakers is on the side walls, facing each other, a foot or two behind your listening position. If thisplacement is not possible, the speakers may be placed on a rear wall. In either case, mount the speakers two to four feet (60-120cm) above yourhead (when seated).

POWERED SUBWOOFER (Figures 4, 5)

The RM6000 System includes a Powered Subwoofer to enhance bass and really add punch to your home theater. This subwoofer may be placedinside an entertainment center, behind furniture or next to a sofa or chair. It can be placed anywhere in the room, but you will get the best per-formance from it when it is on the same side of the room as the front satellites. Placing it near a wall or in a corner will increase bass loudness.Allow at least 6 inches (15cm) of space between the subwoofer driver and a wall or obstruction. It may lie on its side, but NEVER LAY THE SUB-WOOFER ON THE AMPLIFIER END – THIS WILL DAMAGE THE AMPLIFIER (Figure 5). This subwoofer is not magnetically shielded and should notbe placed close to a television set. If you see any color distortion on your TV, move the subwoofer away from the set.

For more detailed subwoofer placement and set-up advice go to http://www.polkaudio.com/home/faqad/.

W A L L - M O U N T I N G T H E S A T E L L I T E S A N D C E N T E R S P E A K E R ( F I G U R E S 6 , 7 )

For easy, safe and secure installation, RM Series Satellite and Center Channel Speakers have keyhole slots incorporated into their design (2 onthe back of the Center Channel and 1 on the back of the Satellites). On-wall installation of RM speakers requires basic skills and basic tools(drill and screwdriver). If you are in doubt that you possess the necessary skills or tools, consult your Polk dealer or a professional installer.Otherwise, grab your tools and follow the steps below to safely secure the speakers to the location of your choice.

Make sure the locations you have selected for wall-mounting do not conceal electrical wiring or plumbing.Hold the speaker in the chosen location to make certain it clears the ceiling, adjacent walls, corners, beams, lighting fixtures anddoor/window frames.If you are certain that there is a stud behind the wall surface, drive a #10 screw (not supplied) through the wall and into the stud leavingthe screw head protruding 1/8” (4mm) (Figure 6a)If there is no stud behind the chosen location, install a #10 wall anchor (not supplied) into the wall by following the wall anchormanufacturer’s directions, then insert a #10 screw (not supplied), leaving the screw head protruding 1/16” (1.6mm) (Figure 6b).For masonry walls, use a masonry drill bit and #10 masonry anchor and screw (not included). Line up the speaker so that the screw head passes through the large center hole of the keyhole slot. Let the speaker slide straight down,allowing the screw head to slip behind the smaller end of the keyhole slot (Figure 7).If you require more flexibility, use an optional fully articulating “ball and socket” type mounting bracket such as the Series 25 RST byOmnimount, available at your Polk Audio dealer or in the Polk Webstore at www.polkaudio.tranguard.com.

For accessories and information visit www.polkaudio.com 3

C O N N E C T I N G T H E S P E A K E R S T O Y O U R S Y S T E M

Follow the hookup directions included with your receiver. We recommend using two-conductor 16 gauge or thicker speaker wire. Strip 1/4"(6mm) of insulation from each of the two conductors to expose the bare metal and twist each of the individual conductors into single unfrayedstrands. Note that one of the terminals on the rear of each speaker is red (+) and the other is black (–). Make certain that you connect the wirefrom the red (+) terminal of your amplifier or receiver to the red (+) terminal on your speaker and the wire from the black (–) terminal of youramplifier or receiver to the black (–) terminal on your speaker. Most wire has some indicator (such as color-coding, ribbing or writing) on oneof the two conductors to help you maintain consistency. If your speakers sound “thin,” with little bass and little or no center image, chances arethat one of the speaker wires is connected backwards. Double-check all connections.

U S I N G P U S H - T A B C O N N E C T O R S ( F I G U R E 8 )

To connect wire to the push-tab connectors, push the plastic tab of one connector to open the hole. Insert the bare wire into the hole andrelease the plastic tab (Figure 8). Repeat this step with the other connectors.

A N O T E A B O U T B A S S M A N A G E M E N T

For best sound, DO NOT USE THE “SUBWOOFER OUTPUT” OR LFE JACK ON YOUR RECEIVER TO CONNECT THE SUBWOOFER. The RM6000System features a powered subwoofer that has a built-in, adjustable low pass filter to separate the low frequency signals (the bass) from the full range signal. The dedicated “subwoofer output” jacks (sometimes labeled “LFE” or “Low Frequency Effects”) on most receivers also contain a fixed low pass filter. If you connect the subwoofer to the receiver’s LFE Out jack, the two filters will interact, reducing the fidelity of your system. Follow the hook up and receiver set-up/bass management instructions below and all of the bass will go to the subwoofer, you will notlose any bass, and you will get the highest possible performance from your system. We promise.

For more detailed subwoofer placement and set-up advice go to http://www.polkaudio.com/home/faqad/.

R E C O M M E N D E D H O O K - U P M E T H O D ( F I G U R E S 9 , 1 0 )Connect the left and right front speaker outputs of your receiver or amplifier to the speaker level inputs of the powered subwoofer withspeaker wire.Then, connect the left and right front satellite speakers with speaker wire from the speaker level outputs from the powered subwoofer.If it is more convenient, parallel wire the subwoofer and front satellites from your receiver (Figure 10).Connect the Center Channel Speaker directly to the center channel output from your receiver.Connect the Rear Surround Satellites directly to the rear or surround channel outputs from your receiver.

R E C E I V E R S E T - U P / B A S S M A N A G E M E N T

All surround receivers allow you to “customize” their performance depending on the size of your speakers. Refer to the owner’s manual of yourreceiver or surround processor to learn how this is done. To get the best performance from the RM6000, use the following settings with theabove hook-up method:

Front speakers—set to “large”Center speaker—set to “normal” or “small”Surround speakers—set to “small”Subwoofer—set to “OFF” or “none.” (We know. Doesn’t make sense, right? Your RM6000 has a subwoofer. But really truly, this is the correct setting for the recommended hook-up method. By setting the front left and right speakers to “Large” and routing them through the subwoofer as instructed above, you deliver a full range signal to the subwoofer’s low pass filter. The low pass filter takes the lowfrequencies and passes the rest on to the front speakers, for perfect sub/sat blending.)

A D J U S T I N G T H E P O W E R E D S U B W O O F E R F O R B E S T P E R F O R M A N C E ( F I G U R E 1 1 )Set the Phase Switch to 180°.Start with the Volume Control at about the 12:00 Noon position. Adjust up or down until you get sufficient bass for your personal taste.Remember that sub placement position can have a very pronounced effect on the perceived bass level.Turn the Low Pass Filter Control to the 2:00 position and adjust as appropriate for best sub/sat blending. You’ll know the setting is correctwhen a high quality recorded male voice sounds full without any “chestiness.” If vocals sound “thin” turn this setting up (toward 160Hz), ifthey sound “boomy,” turn it down (toward 80Hz).


S A F E L I M I T S O F O P E R A T I O N

Your Polk Audio RM Series loudspeakers are made with the highest-quality materials to ensure years of great sounding, trouble-free perfor-mance. However, damage to loudspeakers can occur when an amplifier, regardless of its wattage, is made to play at higher listening levels thatits power can clearly produce. (This is usually beyond the “1 to 2 o’clock” position on the volume control.) This results in very high levels ofaudible distortion originating in the amplifier, which adds a harsh, gritty sound to the music you’re listening to. Contrary to popular belief, a speaker is more likely to be damaged by trying to get too much volume from a low-powered amp or receiver than from a high-powered one.

M A I N T A I N I N G T H E A P P E A R A N C E O F R M S E R I E S S P E A K E R S

Your new speaker cabinet is made of a rugged material that can be dusted or cleaned with a damp cloth. Avoid harsh detergents and cleaningfluids; they can permanently damage the finish of your speakers. Gently vacuum the grilles to remove dust.

T E C H N I C A L A S S I S T A N C E O R S E R V I C E

If, after following these hook up directions, you experience difficulty, please double-check all wire connections. Should you isolate the problemto the speaker, contact the authorized Polk Audio dealer where you made your purchase, or call Polk Audio’s friendly Customer ServiceDepartment at 800-377-7655 (US or CAN), 410-764-5266 (9am to 6pm EST, Monday through Friday). You may also contact us via email:[email protected]. For more information, visit www.polkaudio.com.

For more detailed hook up information and manual updates, visit:http://www.polkaudio.com/home/products/systems/rm6000orhttp://www.polkaudio.com/home/faqad

For recommended accessories (including speaker stands, brackets, accessories and exclusive Polk Audio logowear) visit our webstore:http://www.polkaudio.tranguard.com


Figure 1

Most popular placement, above the TV screen. RM6000 Series Center Channel Speakers can also be wall mounted. RM6000 Series Loudspeakers are magnetical-ly shielded for safe placement near TV or video monitors. If you notice video distortion or discoloration, immediately move the speakers away from the videosource and call Polk Audio Customer Service 800.377.7655 (US & Can) or [email protected]

Esta es la ubicación más popular, sobre el televisor. Los altavoces de canal central de la serie RM6000 también se pueden montar en la pared. Los altavoces de la serie RM6000 tienen blindaje magnético para poder ubicarlos con seguridad cerca de televisores o monitores de video. Si nota que hay distorsión o descoloración del video, aleje inmediatamente los altavoces de la fuente de video y llame al Servicio al Cliente de Polk Audio al 800.377.7655 (EE.UU. y Canadá)o escriba a [email protected].

Disposition la plus courante, au-dessus de l’écran. Les enceintes centrales de la Série RM6000 peuvent également être installées au mur. Elles sont blindéesmagnétiquement et peuvent être disposées à proximité d’une télé ou d’un moniteur vidéo. Si vous percevez de la distorsion ou de la décoloration vidéo,éloignez immédiatement les enceintes de l’écran et communiquez avec le service à la clientèle de Polk. 800-377-7655 (É-U et Can) ou [email protected]

Häufigste Platzierung – über dem Fernsehbildschirm. Lautsprecher der Serie RM6000 können auch an der Wand montiert werden. Diese Lautsprecher (RM6000)sind für eine Platzierung in der Nähe von Fernsehgeräten oder Videomonitoren magnetisch abgeschirmt. Wenn Sie eine Verzerrung oder Verfärbung desVideobildes bemerken, sind die Lautsprecher umgehend von der Videoquelle zu entfernen. Setzen Sie sich in diesem Fall mit dem Kundendienst von PolkAudio in Verbindung (telefonisch unter: 1 (800) 377.7655 — gebührenfrei, nur in den USA/Kanada — oder per E-Mail an: [email protected]).

OR

Figure 2

Front speaker array. Create an equilateral triangle between the speakers and the listeningposition. RM6000 Series Loudspeakers are magnetically shielded for safe placement nearTV or video monitors. If you notice video distortion or discoloration, immediately movethe speakers away from the video source and call Polk Audio Customer Service800.377.7655 (US & Can) or [email protected]

Disposición de los altavoces frontales. Forme un triángulo equilátero entre los altavoces yla posición de audición. Los altavoces de la serie RM6000 tienen blindaje magnético parapoder ubicarlos con seguridad cerca de televisores o monitores de video. Si nota que haydistorsión o descoloración del video, aleje inmediatamente los altavoces de la fuente devideo y llame al Servicio al Cliente de Polk Audio al 800.377.7655 (EE.UU. y Canadá) oescriba a [email protected].

Disposition des enceintes avant. Créez un triangle équilatéral entre les enceintes et laposition d’écoute. Les enceintes de la série RM6000 sont blindées magnétiquement etpeuvent être disposées à proximité d’une télé ou d’un moniteur vidéo. Si vous percevezde la distorsion ou de la décoloration vidéo, éloignez immédiatement les enceintes del’écran et communiquez avec le service à la clientèle de Polk. 800-377-7655 (É-U et Can) ou [email protected]

Anordnung der vorderen Lautsprecher. Bilden Sie ein Dreieck zwischen den Lautsprechernund Ihrer Hörposition. Diese Lautsprecher (RM6000) sind für eine Platzierung in der Nähevon Fernsehgeräten oder Videomonitoren magnetisch abgeschirmt. Wenn Sie eineVerzerrung oder Verfärbung des Videobildes bemerken, sind die Lautsprecher umgehendvon der Videoquelle zu entfernen. Setzen Sie sich in diesem Fall mit dem Kundendienstvon Polk Audio in Verbindung (telefonisch unter: 1 (800) 377.7655 - gebührenfrei, nur inden USA/Kanada - oder per E-Mail an: [email protected]).


Figure 4

SUB TV

Allow at least 6" (15cm) between sub driver and wall or obstruction.

Deje por lo menos 15 cm (6 plg.) entre el excitador delsubwoofer y la pared o la obstrucción.

Assurez un dégagement d’au moins 15cm (6po) entre le transducteur du subwoofer et le mur (ou toute autreobstruction).

Lassen Sie mindestens 15 cm Abstand zwischen demSubwoofer (Treiber) und der Wand oder anderenGegenständen.

6" (15cm)

Figure 5

NEVER LAY THE SUBWOOFER ON ITS AMPLIFER END. THIS WILL DAMAGE THE SUBWOOFER.

NUNCA COLOQUE EL SUBWOOFER SOBRE EL EXTREMO DE SU AMPLIFICADOR. ESTO DAÑARÍA EL AMPLIFICADOR.

NE COUCHEZ JAMAIS LE SUBWOOFER SUR SON AMPLIFICATEUR. L’AMPLIFICATEUR SERA ENDOMMAGÉ.

LEGEN SIE DEN SUBWOOFER NIE AUF DASVERSTÄRKERENDE. DADURCH WIRD DER SUBWOOFERBESCHÄDIGT.

AMPLIFIERAMPLIFICADORAMPLIFICATEUR

VERSTÄRKER

NOT OK

Figure 3a

Placement options for rear/surround speakers.

Opciones de ubicación de los altavoces surround o de atrás.

Options de disposition des enceintes arrière- ambiophoniques.

Platzierungsoptionen für hintere Lautsprecher bzw. Surround-Lautsprecher.

Figure 3b


Figure 8

Using plastic tab connectors.

Uso de conectores de plástico.

Utilisation des bornes à languettes de plastique.

Verwendung der Kunststoffanschlüsse.

Figure 6

a

b

Use #10 screw for wall stud, use #10 wall anchors + screw for no wall stud.

Use tornillos n° 10 cuando haya parales internos en la pared, use tornillos y anclas n° 10 cuando no haya parales internos.

Utilisez des vis #10 pour fixation sur un montant ou des chevilles #10avec vis s’il n’y a pas de montant.

Verwenden Sie eine Schraube Nr. 10 für Wände mit Holzstielverstärkungbzw. Dübel und Schrauben (Nr. 10) für Wände ohneHolzstielverstärkung.

Figure 7

Slide the speaker down on the screw heads to catch the keyhole slots.

Deslice el altavoz sobre las cabezas de los tornillos para que encajen en las ranuras en forma de cerradura.

Glissez l’enceinte sur les têtes de vis jusqu’à ce que les encoches en trou de serrure s’enclenchent.

Schieben Sie den Lautsprecher auf die Schraubköpfe herunter, so dass er in den Ritzen einrastet.


R L - +- + - +FRONT

R L - + - +

RECEIVER

LINE INL

R

SPEAKER LEVEL INPUT

+ R – – L +

+ R – – L +

SPEAKER LEVEL OUTPUT

– +

– +

– +

– +

– +

REARCENTER

CENTER CHANNEL

SUBWOOFER

Parallel Wire Hookup.

Método de conexión usando cables con conectores RCA para salidas de preamplificador.

Branchement aux sorties niveau de ligne du préamplificateur.

Line-Level-Anschlussmethode mit Vorverstärker-Ausgängen.

Figure 10

Figure 9

R L – +– +

– +

FRONT– + – +

RECEIVER

LINE INL

R

SPEAKER LEVEL INPUT

+ R – – L +

+ R – – L +

SPEAKER LEVEL OUTPUT

– +

– +

– +

– +

– +

REARCENTER

R L

CENTER CHANNEL

SUBWOOFER

Basic Speaker Wire Hookup method. We recommend this method for best blending.

Método básico de conexión de los cables del altavoz. Recomendamos este método para obtener la mejor mezcla.

Branchement élémentaire des fils de haut-parleurs. Méthode recommandée pour la meilleure sonorité.

Grundlegende Methode zum Anschluss der Lautsprecherkabel. Zur Gewährleistung des optimalen Hörerlebnis empfehlen wir diese Methode.


Figure 11


LINE IN

L

R

VOLUME

MIN MAX

LOW PASS(Hz)100

80 160

POWER

ONAUTO

OFF 180º

0ºPHASE

+ RIGHT – – LEFT +SPEAKER LEVEL INPUT

+ RIGHT – – LEFT +SPEAKER LEVEL OUTPUT

Rear of RM6000 Powered Subwoofer showing controls.

Parte de atrás del subwoofer de potencia RM6000. Se ven los controles.

Arrière et contrôles du subwoofer amplifié RM6000.

Rückseite des Subwoofers (mit RM6000) mit Steuerungen.


S P E C I F I C AT I O N SR M 6 0 0 0 S Y S T E M

System Frequency 32Hz-22kHzResponse

-3dB Frequency 45Hz-19kHzResponse

Recommended 10-100 Watts continuousAmplifier Power

Efficiency Satellites 89db SPL (@ 1m, 2.83V drive level)& Center Channel

Impedance Compatible with 8 ohm amplifiers

Driver Complement

Satellites: 1 – 3" long throw mid-bass driver1 1/2" dome video shielded

Center Channel: 2 – 3" long throw mid-bass driver1 1/2" dome video shielded

Subwoofer: 8" long throw driver

Subwoofer Amplifier: 50 Watts continuous average power into 4ohms<1%THD, 40-180Hz

Size & Weight Dimensions (H x W x D) Weight

Satellites 5.4" x 3.5" x 4" 2 lbs. each13.7cm x 8.9cm x 10.2cm 0.9 kg

Center 4.25" x 10" x 3.8" 3.5 lbs. each10.8cm x 25.4cm x 9.7cm 1.6 kg

Subwoofer 13" x 11.5" x 14.5" 22.5 lbs. each33.0cm x 29.2cm x 36.8cm 10.2 kg

RM6000 System 40 lbs. total (18.1 kg)Package Weight


POLK AUDIO LIMITED WARRANTYWarranty for Satellites and Center Channel LoudspeakersPolk Audio, Inc. warrants to the original purchaser only that this PolkAudio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of five (5) years from thedate of original retail purchase from a Polk Audio Authorized Dealer.However, this Warranty will automatically terminate prior to the expiration of the five (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party. The originalretail purchaser shall hereinafter be referred to as “you.”

Warranty for Subwoofer Polk Audio, Inc., warrants to the original purchaser only that theamplifier in this Polk Audio Loud-speaker Product (the “Product”) willbe free from defects in material and workmanship for a period of three(3) years from the date of original retail purchase from a Polk AudioAuthorized Dealer. Polk Audio, Inc., further warrants to the originalpurchaser only that the Loudspeaker(s) in this Polk Audio Product(the “Product”) will be free from defects in material and workmanshipfor a period of five (5) years from the date of original retail purchasefrom a Polk Audio Authorized Dealer. The original retail purchasershall hereinafter be referred to as “you.” However, this Warranty willautomatically terminate prior to the expiration if you sell or otherwisetransfer the Product to any other party.

To allow Polk Audio to offer the best possible warranty service, pleasefill out the Product Registration Card(s) and send it to the Factory, atthe address provided on the Product Cards(s) within ten (10) days ofthe date of purchase.

Defective Products must be shipped, together with proof of purchase,prepaid insured to the Polk Audio Authorized Dealer from whom youpurchased the Product, or to the Factory at 2550 Britannia Boulevard,Suite D, San Diego, California 92154. Products must be shipped in theoriginal shipping container or its equivalent; in any case the risk ofloss or damage in transit is to be borne by you. If upon examination atthe Factory or Polk Audio Authorized Dealer it is determined that theunit was defective in materials or workmanship at any time duringthis Warranty period, Polk Audio or the Polk Audio Authorized Dealerwill, at its option, repair or replace this Product at no additional

charge, except as set forth below. All replaced parts and Productsbecome the property of Polk Audio. Products replaced or repairedunder this warranty will be returned to you, within a reasonable time,freight prepaid.

This warranty does not include service or parts to repair damagecaused by accident, disaster, misuse, abuse, negligence, inadequatepacking or shipping procedures, commercial use, voltage inputs inexcess of the rated maximum of the unit, cosmetic appearance of cabi-netry not directly attributable to defect in materials or workmanship,or service, repair, or modification of the Product which has not beenauthorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered withor defaced.

This warranty is in lieu of all other expressed Warranties. If thisProduct is defective in materials or workmanship as warranted above,your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental orconsequential damages arising out of the use or inability to use theProduct, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer hasbeen advised of the possibility of such damages, or for any claim byany other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion maynot apply to you.

All implied warranties on this Product are limited to the duration ofthis expressed Warranty. Some states do not allow limitation on howlong an implied Warranty lasts, so the above limitations may not applyto you. This Warranty gives you specific legal rights, and you also mayhave other rights which vary from state to state.

This Warranty applies only to Products purchased in the United States of America, its possessions, and U.S. and NATO armed forcesexchanges and audio clubs. The Warranty terms and conditions applic-able to Products purchased in other countries are available from thePolk Audio Authorized Distributors in such countries.

Polk Audio5601 Metro Drive

Baltimore, Maryland 21215(800) 377-7655


OWNER’S MANUAL RM6000ecx.images-amazon.com/images/I/A1KX0nJ2SHL.pdfWOOFER ON THE AMPLIFIER END –...

Documents

Transcript of OWNER’S MANUAL RM6000ecx.images-amazon.com/images/I/A1KX0nJ2SHL.pdfWOOFER ON THE AMPLIFIER END –...