Vacuum Cleaner

®

Read this manual beforeoperating cleaner

(Including Limited & Supreme models)

®

Dimension

Owner’sManual

1

It is suggested that you attach your sales receipt to this owner’smanual. Verification of date of purchase may be required for warrantyservice of your HOOVER product.

and has serial number_________________________________________

Your cleaner is model_________________________________________

For your personal records, please enter the COMPLETE model andserial number in the spaces provided and retain this information.

The model and serial number are located on the bottom of the cleaner.

Save!IndexAssembling Cleaner .............................. 3-10Cleaner Description...................................11Cleaning Effectiveness Per Amp Rating.25Energy Saving Tips ...................................25How To Use

Cleaning Tools................................ 15-16Upright Cleaner .............................. 12-14

If You Have a Problem...............................25Important Safeguards .................................2Lubrication .................................................24Maintenance

Authorized Service...............................26Clearing Obstructions .........................24Replacing Agitator ...............................23Replacing Belt ................................ 20-22Replacing Headlight....................... 19-20Replacing Paper Bag ..................... 17-18

Unpacking Cleaner ......................................3Warranty .....................................................27

Fill in and retain

© 1994 The Hoover Company

Thank you for selecting a HOOVER product.

When using an electrical appliance, always followbasic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning:• Do not use outdoors or on wet surfaces.• Close supervision is necessary when any appliance is used by or

near children. Do not allow vacuum cleaner to be used as a toy or torun unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body awayfrom openings, rotating agitator and other moving parts. Do notoperate cleaner in bare feet or when wearing open toe shoes orsandals.

• Do not pick up anything that is burning or smoking, such as ciga-rettes, matches, or hot ashes.

• Do not use to pick up flammable or combustible liquids such asgasoline or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They maydamage the cleaner and the bag.

• Do not use without dust bag or filters in place. Change bag fre-quently when picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.• Do not put any object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, or anything that may reduce airflow.

• Do not pull or carry by cord, use cord as a handle, close door oncord or pull cord around sharp edges or corners. Do not run appli-ance over cord. Keep cord away from heated surfaces.

• Always disconnect cord from electrical outlet before servicing thecleaner.

• Unplug cleaner when not in use. Turn off all controls before unplug-ging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, notthe cord. Never handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.• Do not use with damaged cord or plug. If appliance is not working

as it should, has been dropped, damaged, left outdoors, or droppedinto water, take it to a Hoover Factory Service Center or AuthorizedHoover Warranty Service Dealer (Depot).

• Use vacuum cleaner only for its intended use as described in theinstructions. Use only attachments recommended by The HooverCompany; others may cause hazards.

To reduce the risk of fire, electric shock, orinjury:

Important Safeguards!

Save these instructions!2

DO NOT RETURN THIS PRODUCT TO THE STORE.

This cleaner was inspected and packaged carefully before beingshipped from the factory. If you should happen to need assistance dur-ing assembly or operation call

1-800-944-9200 for an automated referral of authorized serviceoutlet locations (U.S. only) or1-216-499-9499 to speak with a representative in our ConsumerResponse Center.

4

STEP 2: Assemble handle

3

Assembling cleanerIt is extremely important to read andfollow all the instruction steps in order.

STEP 1: Unpack cartonRemove all parts from cartonand identify each item shown.

Make sure all parts, especiallysmall items such as D, G, andK, are located before dispos-ing of cardboard packing.

A.Upper handleB.Lower handleC.CordD.BracketE.Bag compartment and tool

storageF. Cleaner bodyG.Handle bolt and nut packet

(One extra nut included)H.Paper bags (Some models

come with 2 bags, othershave additional bags.)

I. Hose and cleaning toolsJ. Extension wandK.Extra belt

A BC

D

E

F

I

J

K

G H

Note: The white switch lock above the ON/OFF switch, aids in assemblyof your cleaner. Assembly can be continued if the switch lock is missing.However, do not remove the switch lock until assembly is completed.

Continued ➜

Insert large rectangular end ofcord into pocket in bottom ofhandle, with side marked “UP”visible. (Fig. 2)Make sure rectangular end ispushed into the handle as far aspossible. (Fig. 3)

Slide cord protector toward upperhandle. (Fig. 2)

2

UPPERHANDLE

STEP 3: Attach cord

Place upper and lower handle parts on a flat surface, aligning rodsections. With hands on sides of sections, push parts together firmlyuntil they “click” and rod sections lock together. (Fig. 1)*Be careful not to press against the dark gray rod extendingfrom thelower handle. (Fig. 2) Do not push handle togetherwith hands on ends of sections.

UPPERHANDLE

ROD SECTIONS

LOWER HANDLE

ON/OFF SWITCH

Align upper handle andlower handle as shown.

“UP”

*ROD LOWER HANDLE

CORD PROTECTOR (slide ➜)

3 “UP”

*ROD CORD PROTECTOR

1

Side mounted hose trademark ofThe Hoover Company

This cleaner is intended forhousehold use.

The assembled cleaner will looklike this drawing.

If you need assistance with any stepof the assembly, call1-800-944-9200 for an automatedreferral of authorized service outlet locations (U.S. only) or1-216-499-9499 to speak with arepresentative in our ConsumerResponse Center.

Rotate cord protector on cord until you see its arrow. (Fig. 4)

5

4

Do not plug cleaner in until assembly is totally complete.

8

9

RAILS

RAILS

6

STEP 4: Attachhandle

Note location of tapered rails onbracket and on lower handle.(Fig. 8)

With printed side of bracketfacing up, slide rails on bracketonto rails on lower handle untilbracket snaps past the lock tab.(Fig. 9)

CORDPROTECTOR

ARROW

5

UPPERHANDLE

GROOVE

SLOT

6With arrow on cord protectorpointing toward arrow on upperhandle, press groove in cordprotector into slot in upperhandle. (Fig. 5 and 6)

UPPERHANDLE

CORD PROTECTOR

CORD PROTECTOR

7

Pull cord tight.

Press cord into place at each of the three notches indicated. (Fig. 7)

CORDPROTECTOR

LOCK TAB

BRACKET

HOLEPull bracket toward bottom ofhandle slightly to make surebracket is locked in place.

Make sure hole in bracketaligns with hole in handle.

Continued ➜

10

HANDLEBASE

With ON/OFF switch to front,place assembled handle ontohandle base of cleaner body.(Fig. 10)

Rock handle side to side whilepushing down firmly. Extrapushing effort may be re-quired.

8

TABS18

To replace bag door, insert the2 tabs on bottom of bag doorinto the 2 slots on bag compart-ment. (Fig. 18)

15

HOOKS

DIRTTUBE

SLOTS

BAGCOMPART-MENT

Push paper bag collar firmlyonto tube. (Fig. 17)

17

16BAGCOLLAR

DIRTTUBE

Tuck top and bottom of paperbag into bag compartment.

Align opening in paper bag withdirt tube insidebag compart-ment. (Fig. 16)

STEP 6: Attachpaper bag

Note round opening and hookson back of bag compartment.

Place opening over dirt tubeand align hooks with slots inhandle.Push very firmly to snaphooks into handle. (Fig. 15)

Pull on bag compartment tomake sure it is completelysnapped to handle.

Make sure all edges of paperbag are completely inside thebag compartment.

Close door.Continued ➜

TAB

Slide large tab on bottom of baghousing into slot between thebracket and the lower handle(Fig. 14).

7

11BOLT NUT

If bolt will not go through holeeasily , check the following:

Push bolt into hole on lowerfront of handle. (Fig. 11)

• the bracket is properly positioned (see Fig. 9)

• the handle is pushed down completely (see Fig. 10)

13

Pull bag door latch forward andremove door. Set bag dooraside. (Fig. 13)

STEP 4: Attachbag compartment

BAG DOOR

BAG DOORLATCH

12

NUT

Place nut in recessed area atback of handle. Hold nut inplace while tightening boltsecurely with a screw driver.(Fig. 12)

Only one nut is needed on thismodel. The extra nut is notrequired but has been providedfor your convenience.

BRACKET

14

9

Pull switch lock above ON/OFFswitch straight out. (Fig. 19)

Dispose of switch lock.

Note: If switch lock has comeoff during assembly makesure switch is in the OFFposition (down) before plug-ging cord into electrical outlet.

19

SWITCHLOCK

ON/OFFSWITCH

21

Note: Hose ends must be firmlyconnected to cleaner base andtool rack when cleaning floors.

Bring hose toward front ofcleaner and stretch hose overhose rack. Push opposite hoseend firmly into rear “cup” inrack. (Fig. 21)

20 HOSEDOOR

TURN HOSE

STEP 7: Attachhose and tools

With cleaner handle in lowestposition, open hose door andinsert hose end with tabs intocleaner.

Open hose door and inserthose end with tabs into thecleaner.

Turn hose end to lock inplace. (Fig. 20)

Raise handle to upright position.

22

23

24

EXTRAPAPERBAG

EXTRABELT

A

B

C

Position wand,with smaller enddown,in side of cleaner asshown. (Fig. 22)

10

Position dusting brush (A),furniture nozzle (B), andcrevice tool (C), into toolstorage area as shown. (Fig.23)

Open tool cover (some modelsonly).

Note: Some models do nothave a tool cover.

The extra belt and one extrapaper bag can be stored on theback of the cleaner handle asshown. (Fig. 24)

CAUTION: When cleaner isturned on, the agitator willcontinue to rotate whencleaner handle is in uprightposition. Avoid tippingcleaner or setting it on furni-ture, fringed area rugs, orcarpeted stairs during tooluse.

Fill out and return the product registration card included with yourcleaner.

12

How to use

The cleaner can also be moved bylifting it as shown.

under low furniture. Step on handlerelease lever to lower handle.TransportingcleanerTo move your cleaner from room toroom, put handle in upright position,tilt cleaner back on rear wheels, andpush forward.

Handle positionsThe handle of your cleaner hasthree positions; upright for storageand when using cleaning tools;operating for general operation oncarpet and floors; low for reaching

into “cup” in tool rack for maximumsuction on floors.

To reduce the risk of electric shock,this appliance has a polarized plug(one blade is wider than the other).This plug will fit in a polarized outletonly one way. If the plug does notfit fully in the outlet, reverse theplug. If it still does not fit, contact aqualified electrician to install theproper outlet. Do not change theplug in any way.

To turn cleaner on, push switch up.To turn cleaner off, push switchdown.Plug cord into electrical outlet. Turncleaner on and, with handlein upright position, pull back onhandle until front of cleaner islifted off the carpet. This insuresthat the paper bag is inflated.Hose end must be firmly pushed

22

21

20

3

1

2

3

456

9

87

10

1112

13

141516

17

18

19

The assembled cleaner will look likethe drawing below.

1. Handle

2. ON/OFF switch

3. Cord hooks: wrap cord aroundhooks for storage. The top hookcan be rotated right or left for easycord release.

4. Furniture nozzle

5. Dusting brush

6. Crevice tool

7. Tool cover (some models only)

8. Bag door latch

9. Bag door

10. Check bag indicator (somemodels only)

11. Stair cleaning handle

12. Cleaner body

13. Nozzle control knob

14. Furniture guard

15. Headlight

16. Hood

17. Hose door

18. Hose

19. Extension wand

20. Extra belt storage

21. Extra bag storage

22. Handle release lever

Cleanerdescription

Operate cleaner only at voltagespecified on data plate on bottom ofcleaner.

11

The cleaning of carpet and rugs

Carpet heightadjustment

The nozzle will not move into theadjusted position until the cleanerhandle is lowered to the operatingposition.

When using hose and tools, slideknob to the Cleaning Toolssetting. Return knob to the correctsetting when cleaning floors. Donot leave knob in Cleaning Tools

takes place at the nozzle.

If it is necessary to raise and lowerthe nozzle for various carpet pileheights, slide the nozzle controlknob to the correct setting.

For ease in sliding knob, the handleshould be in the upright position.

Leave hose attached to cleaner andplace other end firmly into tool rackfor peak performance whencleaning carpets.

NOZZLE

NOZZLE CONTROLKNOB

13

For maximum cleaning performance the following carpet height settingsare recommended.

• Setting 1: for all types of carpet.• Higher Settings:* for very deep pile carpet where easier

pushing effort is desired, while main-taining good cleaning performance.

• Setting 5: for hose and cleaning tool use only.*Note: If the cleaner is difficult to push, slide the knob to the next highersetting.

14

setting when cleaning floors.Cleaning lightweightflexible rugsStand on one end of rug and movecleaner toward other end or edge.Before reaching edge, push downon handle. This will lift up thenozzle (front of cleaner) and willprevent rug from clinging tocleaner. Continue to lift up nozzleso that when you have reachedthe edge, it is completely off therug. Move cleaner back to startagain, lower nozzle, and use onlyforward strokes.

Edge cleaningEdge cleaning is provided on bothsides of nozzle to remove dirt incarpet near baseboards andfurniture. Guide either side ofnozzle parallel to edge of carpet orfurniture.

Stair cleaningA stair cleaning handle has beendesigned for ease in using yourcleaner on stairs. With handle inoperating position, place fingersunder edge of stair cleaning handleand guide cleaner with other hand

When using cleaning tools, theagitator will continue to rotate.

CAUTION: To avoid personalinjury or unnecessary wear tocarpet, and to prevent thecleaner from falling, use extracare if cleaner is placed onstairs.

on upper handle.As an alternative, you may use thehose and furniture nozzle for staircleaning.

C. Attach wandand toolsThe tools are attached to the hoseor the wand in the same manner.Push tool firmly onto hose; twist toolslightly to tighten or loosen connec-tion.Use tools with cleaner handle inupright position.

How to attach toolcoverThe tool cover is designed with a“break-away” feature which allows itto snap off if it is pushed open toofar. To reattach, align hinges ofcover with slots on front of toolstorage area. Press cover back intoplace.

CAUTION: Agitator continues to rotate while cleaner handle is in uprightposition. Avoid tipping cleaner or setting it on furniture, fringed arearugs, or carpeted stairs during tool use.

How to clean toolsTo clean the hose, wipe off dirt with a cloth dampened in a liquid deter-gent. Rinse with a damp cloth. Cleaning tools may be washed in warmwater with a detergent. Rinse and air dry before using.

POSITION #5

1

2

3

4

16

B. Select propercleaning toolThe cleaning tools have many uses.Select the tool best suited for thecleaning task from the descriptionsbelow.

1. Dusting brush may be used forcarved furniture, table tops, books,lamps, lighting fixtures, venetianblinds, baseboards, shutters, andregisters.2. Furniture nozzle may be usedfor upholstered furniture, draperies,tapestries, mattresses, clothing,automobile interiors, and carpetedstairs.3. Crevice tool may be used in tightspaces, corners and along edges insuch places as dresser drawers,upholstered furniture, stairs, andbaseboards.4. Wand is used to give extra lengthto your hose. Attach it to any of theabove tools.

The cleaning tools allow you to dospecific cleaning tasks and to cleanhard to reach areas.

The tool set includes a hose,extension wand, crevice tool,furniture nozzle and dusting brush.

Cleaning tools

A. Move nozzlecontrol knobSlide nozzle control knob to theCleaning Tools setting to divertsuction to hose and cleaning tools.Return knob to floor setting whentool use is complete.

15

17

MaintenanceThe following sections are concerned with proper maintenance of thecleaner. Familiarize yourself with these home maintenance tasks and keepthis owner’s manual in a convenient place where you can refer to it whenneeded. Proper use and care of your cleaner will ensure continuedcleaning effectiveness.

When to replaceCheck bag from time to time. It is recommended that you change the bagwhen dirt reaches the dotted line. If more dirt than this accumulates, yourcleaner may not operate effectively.

The bag

NOTE: Check and change bag frequently when using cleaner on newcarpet due to rapid accumulation of carpet fluff. The check bag indicator(some models only) may not fully register if the bag is full of fluff fromnew carpet.

CAUTION: Very fine materials, such as face powder, cornstarch,fireplace ashes or fireplace soot, may seal the paper bag and maycause it to burst even though it is only partially full of dirt. Whencleaner is used to remove material of this nature, change bag often.

Where to buyPaper bags may be purchased from your local Authorized Hoover Dealer(Depot) or from a Hoover Factory Service Center or use the order formpacked with your cleaner. When ordering bags, be sure to give themodel number of your cleaner.

If your cleaner was originally equipped with a micro filtration bag, it isimportant to use only Genuine HOOVER® Micro Filtration Type Zdisposable bags in order to maintain the original cleaning effectivenessof your cleaner.

What to buy

For models with “CHECK BAG”indicator, check bag when indicatorflag pushes through slot in bag doorand “✓ BAG” (“check” bag) isvisible.

The cleaner must be turned ON inorder for the indicator to registera full bag.

Continued ➔

If your cleaner did not originally include a micro filtration bag, usingGenuine HOOVER® Micro Filtration Type Z disposable bags willimprove the cleaning effectiveness of your cleaner.

18

Regular HOOVER® Type Z disposable bags also fit your cleaner.

To assure that your cleaner operates at peakperformance, it is imperative that you use onlygenuine HOOVER paper bags distributed by TheHoover Company. HOOVER bags can be identi-fied by these trademarks —

TABS

DIRTTUBE

BAGCOLLAR

Make sure all edges of paper bagare completely inside the bagcompartment.

Close door.

To replace bag door, lift up loweredge of paper bag. Insert the 2tabs on bottom of bag door into the2 slots on bag compartment.

Fold top of bag down under top ofbag compartment.

Note: Do not clean out old bagand reuse. Discard used bag.

Grasp bag collar and pull collarfrom tube.

Pull bag door latch forward andremove door from cleaner.

Disconnect cleaner from electri-cal outlet.

How to replace

Align opening in new paper bagwith dirt tube inside bag compart-ment. Push bag collar firmly ontotube.

20

5. Remove bulb by pulling straightout of socket; push new bulb intosocket until it locks in place.

6. Place hood on cleaner body andpress firmly to snap all four latches.Pull up on hood slightly to makesure all four latches are secured.Push nozzle control knob back ontofront of cleaner.

➘

To check belt, remove bottom plate as shown on the following page under“How to replace.” Replace belt if it is stretched, cut or broken.

One extra belt has been provided with your cleaner.

What to buy

To assure effective operation, use only genuine HOOVER belts with yourcleaner. When purchasing a new belt, ask for Hoover part No. 38528-027.

The beltThe belt on your HOOVER cleaner causes the agitator to rotate and isimportant for the effective operation of the cleaner. The belt is locatedunder the bottom plate of the cleaner and should be checked from time totime to be sure it is in good condition.

When to replace

The headlightWhat to buyThis cleaner uses a 12 volt, wedgebase type 912 bulb, Hoover partNo. 27313-105.

How to replaceDisconnect cleaner from electri-cal outlet and detach hose fromcleaner.

2. Place handle in operatingposition and turn cleaner over.Insert end of flat screwdriver intoone of the four slots beside anarrow on bottom of cleaner.

3. Pry outward to release latch.Repeat to release latches at theremaining three arrows.

4. Turn cleaner over and lift offhood.

1. Remove nozzle control knob onfront of hood by grasping knob andpulling up.

Do not lift cleaner by grasping thewheels in center of cleaner body.

19

21

How to replaceDisconnect cleaner from electri-cal outlet and detach hose fromcleaner.

1. Place handle in operatingposition and turn cleaner over.

To remove bottom plate, insertend of flat screwdriver into widearea of right-hand slot and pushhandle of screwdriver to the rear.Repeat in left-hand slot.

2. Rotate plate and remove fromcleaner body.

3. Remove hood as directed insteps 1-4 of "How to ReplaceHeadlight."

4. Remove agitator and broken belt.

SLOT SLOT

LIFTHERE

22

BELTGUIDE

7. Turn cleaner over and stretchnew belt onto motor pulley.

5. Slip agitator through new belt(with lettering toward outside ofcleaner). Lower end of belt intoopening in cleaner body; repositionagitator.

6. Place the three tabs on bottomplate into slots in front of cleanerbody. Snap bottom plate into placeover agitator.

8. Replace hood and nozzle controlknob.

Turn agitator, making sure belt isnot pinched between agitator andcleaner body. The belt must rotatefreely inside the belt guide. Ifagitator does not turn, removebottom plate and reposition belt inbelt guide.

Extra effort may be required tostretch belt onto pulley.

If an obstruction occurs duringtool use, turn cleaner off anddisconnect from electrical outletand disconnect hose fromcleaner. Open hose door andcarefully remove any visibleobstruction. If no obstruction isfound, check hose and tools.Remove obstruction. To continueusing tools, reattach hose tocleaner.

If an obstruction occurs duringfloor cleaning, disconnect cleanerfrom electrical outlet and turncleaner to expose underside.Remove bottom plate and agitatoras shown in “The belts” section.Carefully remove any obstructionfrom agitator cavity.

HOSE DOOR

AGITATOR CAVITY

Clearing obstructionsRemove large items from surfaces before vacuuming to prevent obstructionsand to maintain cleaning effectiveness of your cleaner.

If no obstruction is found and a problem persists, contact your HooverFactory Service Center or Authorized Warranty Service Dealer (Depot).

LubricationThe motor is equipped with bearings which contain sufficient lubrication forthe life of the motor. The addition of lubricant could cause damage. Do notadd lubricant to motor bearings.

The agitator is equipped with two ball bearings that should be lubricatedperiodically by a Hoover Factory Service Center or an Authorized HooverWarranty Service Dealer (Depot).

The AgitatorWhen to replaceDisconnect cleaner fromelectrical outlet

When agitator brushes are worn,the agitator should be replaced.To check condition of brushes,move edge of a card acrossbottom plate while turning agitator.To maintain cleaning effectiveness,replace agitator if brushes do nottouch card.

3. Replace with new agitator andbelt as shown in steps 5-8 of “Howto replace belt.”

2. Discard old agitator.

1. Remove bottom plate and hoodas shown in “How to replace belt.”Remove agitator from cleaner.

Disconnect cleaner fromelectrical outlet

How to replace

Double row of brushes - Hooverpart No. 48414-049.

Single row of brushes - Hoover partNo. 48414-051.

The agitator may be replaced witheither a single or double row ofbrushes.

What to buy

23 24

25

Problem Possible cause Possible solution

Cleaner l. Not firmly plugged in. l.Plug unit in firmly.won’t 2. No voltage in wall plug. 2.Check fuse or breaker.run 3. Blown fuse/tripped 3.Replace fuse/reset

breaker. breaker.

Cleaner l. Broken or worn belt. l. Replace belt.won’t 2. Agitator brushes 2.Replace agitator.pick up worn.

3. Bag full. 3.Change paper bag.4. Incorrect carpet height 4.Move nozzle control

setting. knob to type of carpetbeing cleaned.

5. Hose end not secure in 5.Push hose end firmlytool rack. into “cup” in tool rack.

Cleaning l. Hose clogged l. Remove hose and tools;tools won’t remove obstruction.pick up 2. Incorrect setting. 2.Move knob to “Cleaning

Tools”.

Cleaner l. Incorrect carpet height l. Move nozzle controlhard setting. knob to a higher setting.to push

If you have a problemThis appliance was inspected thoroughly and was in good operatingcondition when it was shipped from the factory. If a minor problem occurs,it usually can be solved quite easily when the cause is found. Therefore,this check list is provided for your convenience.

Cleaning Effectiveness Per Amp RatingThis is not an Amp rating. Amps do not measure dirt removal, only theamount of electricity used. Cleaning Effectiveness Per Amp is determinedby dividing this model’s Cleaning Effectiveness* by its Amps.

*Cleaning Effectiveness is the percent value obtained from dividing:

(a) the geometric mean of the amount of embedded carpet dirt removed intesting under ASTM Test Method F608-89, by

(b) the value 29 (the geometric mean of the midpoints of the % dirt pickupscales selected by Hoover as a reference for its rating system).

26

ServiceTo obtain approved HOOVER service and genuine HOOVER parts,locate the nearest Hoover Factory Service Center or AuthorizedHoover Warranty Service Dealer (Depot) by:

• checking the Yellow Pages under “Vacuum Cleaners -Household” OR -

• checking the list of Factory Service Centers providedwith this cleaner OR -

• calling 1-800-944-9200 for an automated referral ofauthorized service outlet locations (U.S. only).

Do not send your cleaner to The Hoover Company in North Cantonfor service, this will only result in delay.

If further assistance is needed, contact The Hoover CompanyConsumer Response Center, North Canton, Ohio 44720Phone: 216-499-9499.

In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8,Phone: 1-800-263-6376.

Always identify your cleaner by the complete model number whenrequesting information or ordering parts. (The model numberappears on the bottom of the cleaner.)

Full One Year Warranty(Domestic Use)

Your HOOVER® appliance is warranted in normal household use, inaccordance with the Owner’s Manual against original defects in materialand workmanship for a period of one full year from date of purchase. Thiswarranty provides, at no cost to you, all labor and parts to place thisappliance in correct operating condition during the warranted period. Thiswarranty applies when the appliance is purchased in the United Statesincluding its territories and possessions, or in Canada or from a U.S. MilitaryExchange. Appliances purchased elsewhere are covered by a limited oneyear warranty which covers the cost of parts only. This warranty does notapply if the appliance is used in a commercial or rental application.

Warranty service can only be obtained by presenting the appliance to oneof the following Authorized Warranty Service outlets. Proof of purchase willbe required before service is rendered.

1. Hoover Factory Service Centers

2. Hoover Authorized Warranty Service Dealers (Depots)

This warranty does not cover pick up, delivery, or house calls; however, ifyou mail your appliance to a Hoover Factory Service Center for warrantyservice, transportation will be paid one way.

While this warranty gives you specific legal rights, you may also have otherrights which vary from state to state (or province).

If further assistance is needed, or if there are questions concerning thiswarranty or the availability of warranty service outlets, write or phone theConsumer Response Center, The Hoover Company, 101 East Maple St.,North Canton, Ohio 44720. Phone 216-499-9499.

R4 3-95 U5209-930/15-930/21-930/ Litho USA 56511-245 23-930/27-930

THE HOOVER COMPANY, NORTH CANTON, OHIO 44720

In Canada, contact Hoover Canada, Burlington, Ontario, L7R 4A8.Phone 1-800-263-6376

For an automated referral of authorized service outlets in theU.S.A., phone 1-800-944-9200.

HOOVER and are registered trademarks