Overcapper | Model: ASRL-CC Adjustable Spinning Rod Lidder ...
2
Applications - Straight-walled or tapered soft containers - Overcaps: round, square, rectangular, injection molded - 2” - 7” diameter containers - 2” - 12” height containers DEL Packaging, Ltd Overcapper | Model: ASRL-CC Adjustable Spinning Rod Lidder - Cradle Chain Containers are backlogged into the timing screw and are timed directly into the overcapper captivator blocks, never fully releasing the container. The captivator blocks are used to support the container during the cap application as well as maintain the shape of the container. A table-top chain conveyor is required to convey containers through the center of the overcapper. Equipment shown with spinning rod cap feeder. PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Transcript of Overcapper | Model: ASRL-CC Adjustable Spinning Rod Lidder ...
Applications
- Straight-walled or tapered soft containers
- Overcaps: round, square, rectangular, injection molded
- 2” - 7” diameter containers
- 2” - 12” height containers
DEL Packaging, Ltd
Overcapper | Model: ASRL-CC
Adjustable Spinning Rod Lidder - Cradle Chain
Containers are backlogged into the timing screw and are timed directly into the overcapper captivator blocks, never fully releasing the container. The captivator blocks are used to support the container during the cap application as well as maintain the shape of the container. A table-top chainconveyor is required to convey containers through the center of the overcapper. Equipment shown with spinning rod cap feeder.
PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Speci�cations- Up to 600 CPM
- Stainless steel (non-wash down) construction
- AB PLC with Yaskawa servos
- Direct drive servo motors
- Height adjustment hand crank with readout
- Integrated line controls
- Shown with spinning rod cap feeder
Available Options
- Rotary cap feeder
- Spinning rod cap feeder
- Sanitary wash-down construction
- Conveyors (table-top, air, etc.)
- Coupon / lea�et inserters
- Quick-change timing screw infeed
- Inclined vertical cap loader
- Elevator cap sorter feeder
- Spinning rod head cart with wench
- Ethernet and communication modules
- Electrical and control system upgrade
- Digital height and diameter adjust packages
- 220 Volt / 50-60 Hertz / 3 Phase NEMA 4X
- All domestic and international voltages to meet UL and CE requirements
- Cap detection with reject (�ber optic sensors and/or vision technology)
- Rotary Part Feeders Bulk Loading Elevators
HAND WHEEL
1732.6 [68.21]
B102
86-1
6
B12584-6
30MM REV A
30MM REV A
B102
86-6
B10583-78
PB
GRN ILL
BPI-800H-QRB24G
L-PB-ILL PBI1NO PB737
PB966
BP-800H-AR2A
BPI-800H-FRXTQ24RA1
L-ESPB-MUSH ESNO2NC ES703
LT-855TP-B24Y3Y5Y4
L-855B24D3D5D4
BEA1020
CB-800T-XD2L-PN ESNO2NC
STOP
EMERGENCY
L-TAG-S2
ON
CONTROL
L-TAG-S2
JOG
CAPPER
L-TAG-S2
B10583-78
B101
90-2
8
B10253-13
B10763-27
15919
FP-6.5L-SANI
D13351-()
HEIGHT ADJUST
CURVED CAP CHUTE
COMPRESSION ROLLER ASSEMBLY
1.25 TO 7.25 CONT. HT3104.9
279.9 [11.02]
SRH SPINNING ROD CAP FEEDER
B119
00
C09592-246 C09592-246
307LH307RH
307LH307RH
307LH
307RH
307RH307RH
307RH307RH
307RH307RH
307LH307LH307LH307LH
307LH307LH
307RH
PRODUCTFLOW
CAPPER OIP
TIMING SCREW
AIR DROP10 CFM @80 PSI
ELECTRICAL DROP:230/60/3PH22 AMPS F.L.
E-STOP
WITH E-STOP
2286.0[90.00]
B12689-5
B12689-5
B14595-6
LT-855TP-B24Y3Y5Y4
L-855B24D3D5D4
BEA1020
B14595-6
E-STOP
878.9[34.60]
1562.8[61.53]
FP-6.5L-SANIFP-6.5L-SANI
Experience the DEL Di�erence
Contact DEL Packaging, Ltd
18113 Telge Road | Cypress, TX 77429Phone: 281.653.0099 | Fax: 281.653.0082http://www.delpackaging.com | [email protected] Overcapper | Model: ASRL-CC
