OVENS & RANGES · • Brass body, carbon steel threaded end fittings, aluminum collar • Thermal...

OVENS & RANGES

Gas Hoses and Accessoriespg 6-7

Add-On Broilers and Griddlespg 24

Range Gratespg 12-13

Door Springspg 20

Gloves and Mittspg 26-27

Motors and Blower Wheelspg 16-17

Shelving and Baking Deckspg 21

Cleanerspg 25

Light Bulbs and Socketspg 18

Timers and Thermometerspg 28

INDEXARTICLES

Selecting a Replacement Thermostat ................................ 4

Gas Hose Code Compliance .............................................. 6

Three Options for Replacement Pilot Tubes ...................... 9

Maintenance Checklist ................................................. 14-15

Oven Gasket Basics ......................................................... 20

Mobilize Your Equipment! ................................................ 22

Oven Mitts: The Dirty Truth .............................................. 26

Is Your Oven Knob Lying? ............................................... 28

Burner Valves and Knobspg 2-3

Thermostats and Dialspg 4-5

Pilot Tubes and Burnerspg 8-10

Rocker Switchespg 18

Caster and Legspg 22-23

Burnerspg 11

Elementspg 19

Gasketspg 20

INDEX

2 Manufacturer name, model and part numbers are used for reference purposes only.

with Adjustable OrificeTWO-PIECE HOUSING

PIPE SIzE DIm. A DIm. B ORDER NO.1/8" 1" 21/8" 52-10081/8" 13/8" 21/2" 52-10251/8" 13/4" 21/2" 52-1076

PIPE SIzE DIm. A DIm. B ORDER NO.1/8" 11/2" 21/2" 52-11031/8" 13/16" 17/8" 52-1081

without Adjustable OrificeTWO-PIECE HOUSING


with Adjustable OrificeONE-PIECE HOUSING


without Adjustable OrificeONE-PIECE HOUSING

BURNER VALVES

PIPE SIzE DIm. A DIm. B ORDER NO.1/2" 11/2" 23/4" 52-1127

PIPE SIzE DIm. A DIm. B ORDER NO.3/8" 25/16" 33/4" 52-1023

Gas Valve Grease• 21/2 oz. tube • 32° to 175°F temperature range

ORDER NO.85-1114

(800) 332-2500 fax: (800) 227-1511 AllPointsFPS.com 3

Designed to Fit Many Manufacturers

Designed to Fit Specific Manufacturers

• Commonly used on Wolf ranges• Plastic

COLOR ORDER NO.Black 22-1151Red 22-1568

• Chrome

FLAT ORDER NO.Up 22-1464

Down 22-1164

• Commonly used on Jade ranges• Chrome

STRIPE ORDER NO.Black 22-1328Red 22-1273

• Commonly used on Vulcan ranges

• Aluminum

COLOR ORDER NO.Chrome 22-1200

Red 22-1059

• Locking screw prevents knob from falling off

FINISh ORDER NO.Chrome Plated 22-1013Chrome Plated (6 pk.) 22-4444Black Plastic 22-1019Red Metal 22-1432

BURNER VALVE KNOBS

• Commonly used on Imperial ranges

• Chrome

ORDER NO.22-1573

• Commonly used on Southbend ranges

• Plastic

ORDER NO.22-1312

• Commonly used on Vulcan ranges

• Plastic

ORDER NO.22-1243

• Plastic• Aluminum strip

ORDER NO.22-1026


BJWA Thermostats

BJWA Thermostat KitsBODY CAN ROTATE AND MOUNT IN FOUR POSITIONS

PILOT FITTING ROTATION OUTLET CAP. LENGTh ORDER NO.3/16" CCT 0° 1/4" NPT 48" 46-1037

None 180° 1/4" NPT 48" 46-12103/16" CCT 0° 7/16" CCT 48" 46-10533/16" CCT 0° 1/4" NPT 72" 46-10383/16" CCT 0° 7/16" CCT 72" 46-1054

REPLACEmENT DIALS ORDER NO.Off, Low, 250-550, Broil 22-1028

Off, Low, 250-500 22-1029Off, Low, 250-550, Broil 22-1028Off, Low, 250-550, Broil 22-1028Off, Low, 250-550, Broil 22-1028

ROTATION TEmP. RANGE ORDER NO.0° 250°-550°F 46-1583

REPLACEmENT DIAL ORDER NO.Off, Low, 250-500 22-1029

• Outlet position A, B, C, or D• 250°-550°F temp. range• 3/16" x 115/8" bulb size

• 3/16" CCT pilot fitting• 7/16" CCT outlet• Outlet position C

• 48" capillary length• 3/16" x 113/16" bulb size• Dial not included

SELECTING A REPLACEmENT ThERmOSTAT

Once the needed information has been collected using either of these methods, provide it to AllPoints and we'll identify the exact replacement part for your model.

METHOD 1Record the Make, Model and Serial # of the existing thermostat

METHOD 21. Identify the type of thermostat on your equipment (FD, BJ, etc.) which will be stamped onto the thermostat2. Identify the temperature range of the thermostat (listed on either the thermostat or the knob)3. Measure the bulb and capillary lengths4. Identify the number of outlets and their position

Choosing a replacement thermostat can seem complicated, but there are two easy methods you can use to identify the correct model.

BJ ThERmOSTATS & DIALS

Includes:• Thermostat• Dial• Bezel

• Gasket• Screws• Plugs

• Stem adapters

hOUSING ROTATIONS WITh OUTLET POSITIONSAll are rear view with by-pass adjustment at top.

0° 180° 90° CCW90° CW


Body 1 Thermostats

Body 2 Thermostats

Body 1 Thermostat Kits

Includes:• Thermostat• Dial• Gasket• Tube adapters• Plugs

• 3/8" NPT gas in/out• F & E inlet• H & G outlet• 54" capillary length• 3/16" x 143/4" bulb size

TEmP. RANGE BULB SIzE ORDER NO.FDO

150°-550°F 3/16" x 143/4" 46-1042FDTO

200°-500°F 5/16" x 153/16" 46-1043

RANGE ORDER NO.REPLACEMENT DIAL

150-500 22-1080REPLACEMENT DIALLOW, 250-500 22-1215

TEmP. RANGE ORDER NO.FDO

150°-550°F 46-1049FDTO

200°-550°F 46-1050

RANGE ORDER NO.REPLACEMENT DIAL

150-550 22-1129REPLACEMENT DIALLOW, 250-550 22-1010

• Dial not included

• 1/2" NPT gas in/out• 48" capillary length• Dial not included

GAS IN/OUT INLET/OUTLET TEmP. RANGE CAP. LENGTh BULB SIzE ORDER NO.FDO

1/2" NPT F / G 150°-550°F 48" 3/16" x 143/4" 46-10477/16" CCT E / H 150°-550°F 48" 3/16" x 143/4" 46-10463/8" NPT F / G 150°-550°F 72" 3/16" x 143/4" 46-1128

FDTO3/8" NPT F / G Lo-500°F 54" 5/16" x 153/16" 46-14361/2" NPT F / G 200°-500°F 54" 3/16" x 143/4" 46-1108

RANGE ORDER NO.REPLACEMENT DIALS150-550 22-1129150-550 22-1009150-550 22-1009REPLACEMENT DIALS150-550 22-1009150-550 22-1009

FD ThERmOSTATS & DIALSBODY 1 INLET / OUTLET POSITIONS

REAR VIEW

F / G E / H

REAR VIEW


GAS hOSE CODE COmPLIANCE

Whenever a new or used piece of equipment is purchased, a new moveable grade gas connector is always recommended at the same time. Why? Safety. The purpose is to minimize the risk of an old line breaking while in use, which in the case of a range means a dangerous gas leak.

When selecting a new gas connector, always work with a foodservice professional to help select the correct diameter and length for your equipment.

All moveable gas connectors will be ANSI Z21.69 certified and comprised of a:

• Corrugated stainless steel connector• Stainless steel braid covering

corrugated connector• Plastic coating covering stainless steel braid

You may wonder, “Why do I need a moveable grade connector? Can’t I just use a connector similar to the one in my house?” The answer is NO. Always use a moveable connector because:

1. IT’S CODE REQUIRED!2. It is stronger and safer than a residential

grade connector3. It allows easier cleaning due to its plastic coating

Gas Hose Kits

Gas Hose Kits

• Thick, non-toxic plastic coating• One-piece construction (no weld)• 5 year limited warranty

• Corrugated stainless steel tubing encased in tight weave stainless steel braid

• Meets ANSI Z21.69 standard

• Corrugated stainless steel tubing encased in tight weave stainless steel braid

• Meets ANSI Z21.69 standard

Kits include:• Gas hose• Quick-disconnect fitting• Ball valve• (2) 90° street elbows• Restraining cable with

mounting hardware

Kits include:• Gas hose• Quick-disconnect fitting• Ball valve• (2) 90° street elbows• Restraining cable with

mounting hardware

Gas Hoses

Gas Hoses

• Patented Stressguard Technology® reduces stress at both ends of the connector

• Anti-microbial PVC coating is heat and wrinkle resistant and inhibits growth of bacteria, mold and mildew on the connector

• Limited lifetime warranty

PIPE SIzE LENGTh ORDER NO.1/2" 36" 32-18281/2" 48" 32-18263/4" 36" 32-18393/4" 48" 32-18213/4" 60" 32-18191" 48" 32-1817


11/4" 48" 32-1030


PIPE SIzE LENGTh ORDER NO.1/2" 48" 32-16373/4" 36" 32-16393/4" 48" 32-16343/4" 60" 32-16351" 48" 32-1633

GAS hOSES


Gas Pressure Regulators

• 1/2 PSIG maximum inlet pressure

• Natural gas• 1 PSIG maximum

inlet pressure• 3/4" pipe size• 3" - 6" adjustable

range (WC)

• Natural gas• 1/2 PSIG maximum

inlet pressure• 1/2" pipe size• 4" - 8" adjustable

range (WC)

Restraining CablesDORMONT

• Required for all movable gas applications

• Prevents strain on gas hose• Actual length is several

inches shorter than hose

Quick-DisconnectsDORMONT

• Brass body, carbon steel threaded end fittings, aluminum collar

• Thermal Shut-off: Polymer insert in QD melts when internal temperatures exceed 350°F to shut off gas flow

Swivel ConnectorsDORMONT

• Reduces stress on the connector• Extends life of the connector• 360° multi-plane range of motion

PIPE SIzE ORDER NO.1/2" 52-11303/4" 52-11321" 52-1181

Gas Shut-Off Valves

mFG. NO. PIPE SIzE ORDER NO.SM50 1/2" 26-2526SM75 3/4" 26-2527SM100 1" 26-2528

TYPE PIPE SIzE ADJUSTABLE RANGE (WC) ORDER NO.Natural Gas 1/2" 3" - 6" 52-1009Natural Gas 3/4" 3" - 6" 52-1011Liquid Propane 1/2" 51/2" - 12" 52-1010Liquid Propane 3/4" 51/2" - 12" 52-1012

PIPE SIzE ORDER NO.1/2" 26-12623/4" 26-12631" 26-1264

hOSE LENGTh ORDER NO.36" 26-251648" 26-1345

60" & 72" 26-2517

GAS ACCESSORIES

ORDER NO.52-1026

ORDER NO.52-1140


Compression Nut Ferrule

Complete Pilot Heads Pilot Head Tips

Pilot Tube & HeadREPLACES ANY PILOT

• Can be cut to any size• Can be bent by hand• 3/16" dia. x 24" long• Includes nut and ferrule• Bendable steel

• Includes nut and ferrule• Slips over existing tubing

DIA. ORDER NO.3/16" 51-10101/4" 51-1036

• Crimp on

DIA. ORDER NO.3/16" 51-11801/4" 51-1179

CCT ORDER NO.1/8" 26-22713/16" 26-15891/4" 26-1590

Steel Tubing

• Copper clad• Sold in 3 ft. sections

Union Coupling Tee Coupling

PILOT TUBES

• 3/16" diameter• 3/8" - 24 threading

ORDER NO.26-1380

• 3/16" diameter• 3/8" - 24 threading

ORDER NO.26-1546

• 3/16" diameter

• 20 per package

ORDER NO.26-3672

• 3/16" diameter

• 10 per package

ORDER NO.26-3648

ORDER NO.51-1475


ThREE OPTIONS FOR REPLACEmENT PILOT TUBES

• Corrugated stainless steel tubing• Replaces aluminum tubing• Shortens time spent on job site• Reduces assembly steps (no flaring)• Increases technician productivity

Includes:• (1) FlexTube• (1) Ferrule• (1) Compression nut• (1) Pilot head

LENGTh ORDER NO.3/16" CCT

12" 26-414018" 26-414124" 26-4142

Flex Tube Assemblies

• Corrugated stainless steel tubing• Replaces aluminum tubing• Shortens time spent on job site• Reduces assembly steps (no flaring)• Increases technician productivity

Includes:• (1) FlexTube• (2) Ferrules• (2) Compression nuts• (1) Male nut/sleeve (break-away fitting)• Installation instructions

LENGTh ORDER NO.3/16" CCT

12" 26-411518" 26-411624" 26-411730" 26-4118

1/4" CCT12" 26-411918" 26-412024" 26-412130" 26-4122

Flex Tube Kits

All three options will fix the equipment, but the best option is almost always flex tubes because of the installation time and price.

1. The first option is to purchase a replacement from the Original Equipment Manufacturer (OEM). These are the easiest to install, but also the most expensive.

2. The second option is copper clad steel tubes and fittings, which can be bent to fit the equipment. This option is the least expensive, but it can be time consuming to bend the tube to the exact dimensions for your range.

3. The final option is stainless steel flex tube. These are medium priced, but as fast to install as the OEM tubes.

PILOT TUBES


Pilot Burners with Electrode

Pilot Burner KitsINCLUDES NATURAL GAS ORIFICE, LIQUID PROPANE ORIFICE, NUT AND SLEEVE

Pilot BurnersNATURAL GAS OR LIQUID PROPANE

PILOT BURNERS

• 3/16" CCT• Straight flame pattern

ORDER NO.51-1201

• 3/16" & 1/4" CCT• Right flame pattern

ORDER NO.51-1481

• 1/4" CCT• 3-way flame pattern

ORDER NO.51-1467


ORDER NO.51-1273

• Natural gas or liquid propane


ORDER NO.51-1440



ORDER NO.51-1437



ORDER NO.51-1108

• Natural gas only• 3/16" CCT• Left flame pattern• 34" wire lead

ORDER NO.51-1192


• 3/16" CCT• Left flame pattern• 13" wire lead

ORDER NO.51-1283


• 1/4" CCT• Right flame pattern• 24" wire lead

ORDER NO.51-1214


• 1/4" CCT• 3-way flame pattern• 30" wire lead

ORDER NO.51-1340


Burner Assemblies

Burner Gaskets

Burner Heads

Air Shutters

BURNERS & AIR ShUTTERS

• 21/8" dia.• 7/16" orifice hole• Single plate

ORDER NO.26-1987

• 21/4" dia.• 15/32" orifice hole• Double plate

ORDER NO.26-1514

• 23/4" dia.• 7/16" orifice hole• Double plate

ORDER NO.26-1472

• 33/4" x 113/16"• 27/8" mount hole centers• 17/8" x 3/4" center hole

ORDER NO.32-1331

• 35/16" x 11/8"• 21/2" mount hole centers• 7/8" dia. center hole

ORDER NO.32-1312

• 211/16" x 11/2"• 2" mount hole centers• 9/10" dia. center hole

ORDER NO.32-1024

• 211/16" x 13/4"• 2" mount hole centers• 11/8" dia. center hole

ORDER NO.32-1165

• 53/4" dia.• Fits Garland

ORDER NO.24-1043

• 43/4" dia.• Fits Imperial

ORDER NO.24-1099

• 83/4" dia.• Fits Montague

ORDER NO.24-1124

• 43/4" dia.• Fits Vulcan

ORDER NO.24-1141

• 61/4" dia. head• 101/2" long venturi• Fits Vulcan

ORDER NO.24-1161

• 515/16" flat-to-flat head• 6" long venturi• Fits Jade

ORDER NO.24-1113

• 51/2" dia. head• Fits Garland

ORDER NO.24-1029

• 51/2" flat-to-flat head• 61/2" long venturi• Fits Garland and U.S. Range

ORDER NO.24-1044


Fits Southbend

Fits MontagueFits Jade

Fits Vulcan

RANGE GRATES

• 95/8" A• 131/2" B

ORDER NO.24-1023

• 3" A• 131/8" B

ORDER NO.24-1012

• 87/8" A• 12" B

ORDER NO.24-1015

• 12" A• 123/4" B

ORDER NO.24-1014

• 111/8" L• 133/8" W

ORDER NO.24-1174

• 117/8" L• 117/8" W

ORDER NO.24-1143

• 117/8" L• 263/4" W

ORDER NO.24-1150

• 61/4" A• 93/4" B

ORDER NO.24-1110

• 63/4" A• 97/8" B

ORDER NO.24-1111

• 81/8" A• 97/8" B

ORDER NO.24-1112

• 101/4" A• 15" B

ORDER NO.24-1128


Fits Garland

Fits WolfFits Imperial

RANGE GRATES

• 99/16" A• 11" B

ORDER NO.24-1024

• 97/8" A• 111/8" B

ORDER NO.24-1057

• 91/8" A• 151/2" B

ORDER NO.24-1036

• 91/4" A• 151/2" B

ORDER NO.24-1056

• 83/4" A• 11" B

ORDER NO.24-1038

• 91/4" A• 101/2" B

ORDER NO.24-1035

• 93/16" A• 111/8" B

ORDER NO.24-1008

• 113/4" L• 123/4" W

ORDER NO.24-1180

• 12" L• 25" W

ORDER NO.24-1194

• 111/4" L• 27" W

ORDER NO.24-1223

• 12" L• 243/4" W

ORDER NO.24-1222

• 12" L• 12" W

ORDER NO.24-1102

• 177/8" L• 207/8" W

ORDER NO.24-1214

• 91/2" A• 141/2" B

ORDER NO.24-1028

14

mAINTENANCE ChECK LIST

Regular maintenance of kitchen equipment is essential to maximize performance and lifespan. You should always consult the owner’s manual for equipment-specific procedures, but there are many general actions that need to be done to all ovens and ranges regardless of brand.

Remember, let everything cool down first. Before you begin any cleaning or maintenance procedures, be sure to turn off your commercial range.

OvEN DOOR gaSKET

If the gasket is located on the frame of the oven door, it can be replaced quickly and easily. If the gasket is located between the front and back section of the door, it is more difficult to remove and should be replaced by a service tech. See page 20 to learn how to tell if the gasket is damaged and needs to be replaced.

OvEN TEMpERaTURE aCCURaCy

Monitor the internal oven temperature to ensure the actual temperature reads the same as the knob setting. The best tool for this is a high quality oven thermometer. If temperature variations become too great, have a professional inspect the oven as it may need to be recalibrated or there could be a problem with the thermostat. See page 28 for preferred oven thermometers.

FlaME aND pIlOT lIgHT

To check the flame, turn on each burner one at a time and look for a steady blue flame. If that is not what you see, turn off the burner and adjust the screw on the air shutter until the flame has been corrected. If the pilot doesn’t stay lit, unplug the range and clean out the clogged port.

gRaTES

Grates will crack and break over time. Monitor these regularly to ensure damaged grates are found and replaced early. Replacement grates can be found on pages 14-15.


CLEANING ChECK LIST

FREQUENCy:

By following these guidelines, along with the specifications in the owner’s manual, and creating a simple maintenance and cleaning schedule your oven and range should stay looking and working like new for many years.

gRaTES

Both gas and electric ranges have removable burners for cleaning. Cast iron grates can be cleaned by simply wiping them down with a wet cloth. If they are in need of a deeper cleaning, they can be soaked in warm soapy water to break down the grease. Electric range elements can be wiped down the same way.

UNDER THE gRaTES OR bURNERS

A great time to clean under grates and burners is when they’re removed for cleaning. If the stove has drip trays, remove them and wipe them down. If they are wiped down daily, they will not be as difficult to clean. These can be soaked in warm soapy water if necessary. For gas ranges, wipe down the area underneath the grates.

OvEN INTERIOR

To clean a porcelain enamel interior, use a standard oven cleaner. For metal interiors, use a mild detergent and soft cloth.

AS NEEDED

Wipe up spills immediately to prevent food from becoming baked on and more difficult to clean.

DAILY

Clean the oven interior with a mild detergent and remove any crumbs at the end of each day. Oven racks should also be removed and cleaned separately.

WEEKLY

Once a week, use a mild soap and soft cloth or soft-bristled brush on the exterior of stainless steel equipment.

MONTHLY

Perform a deeper clean to remove baked on food in oven interior. Check the owner’s manual for procedures and approved oven-cleaning chemicals.


• CCW rotation

DIA. WIDTh ORDER NO.10" 2" 26-4052

103/4" 21/8" 26-1511

• CCW rotation

DIA. WIDTh ORDER NO.97/8" 21/8" 26-3047

103/4" 21/8" 26-1511

• CCW rotation

DIA. WIDTh ORDER NO.97/8" 21/8" 26-132810" 2" 26-4052

• CCW rotation

DIA. WIDTh ORDER NO.97/8" 15/8" 26-146897/8" 15/8" 26-2287

mOTORS & BLOWER WhEELS• 2 speed• 115 volt• .75/.21 HP• 5/8" x 33/4" shaft

ORDER NO.68-1063

• 103/4" dia.• 17/8" width• CCW rotation

ORDER NO.26-1464

• 2 speed• 100-115/200-230 volt• 1/3 HP• 5/8" x 31/4" shaft

ORDER NO.68-1005

• 2 speed• 100-115 volt• 1/3 HP• 5/8" x 31/4" shaft

ORDER NO.68-1058

• 2 speed• 115 volt• 1/3 HP• 5/8" x 23/4" shaft

ORDER NO.68-103

• 2 speed• 120 volt• 1/2, 1/4 HP• 5/8" x 31/2" shaft

ORDER NO.68-1128

Commonly used on:• Garland• U.S.

Range

Commonly used on:• Blodgett

Commonly used on:• Blodgett

Commonly used on:• Hobart• Vulcan• Wolf

Commonly used on:• Duke


• CCW rotation

DIA. WIDTh ORDER NO.10" 2" 26-4052

103/4" 17/8" 26-1464

hOW TO IDENTIFY YOUR BLOWER WhEEL DIRECTIONBlower wheel rotation is viewed from the back of the wheel, not the hub side.

Clockwise direction (CW) Counter clockwise direction (CCW)

Wheel Puller

• CCW rotation

DIA. WIDTh ORDER NO.97/8" 25/8" 26-1469

103/4" 17/8" 26-1464

• CCW rotation

DIA. WIDTh ORDER NO.71/8" 2" 26-147181/16" 21/2" 26-1470

mOTORS & BLOWER WhEELS

• Accepts up to 13/4" hub • For direct drive motor

shafts and 5/8" belt drive

• Comes with 4 hooks and 3 set screws

ORDER NO.72-1104

• 97/8" dia.• 25/8" width• CCW rotation

ORDER NO.26-1469

• 2 speed• 100-115/200-230 volt• 1/2 HP• 5/8" x 31/4" shaft

ORDER NO.68-1009


ORDER NO.68-1035

• 2 speed• 115/230 volt• 1/2 HP• 5/8" x 27/8" shaft

ORDER NO.68-1008


ORDER NO.68-1025

Commonly used on:• Garland • Hobart• U.S.

Range• Vulcan• Wolf

Commonly used on:• Garland • U.S.

Range• Wolf

Commonly used on:• Garland • U.S.

Range

Commonly used on:• Vulcan


Porcelain Light SocketsFOR OVENS AND HOODS

Light BulbsSTANDARD SHATTER PROOF

• HI-OFF-LO operation• 15AMP/125V, 10AMP/250V• Fits 7/8" x 11/2" hole

TABS ACTION ORDER NO.6 DPDT 42-12779 3PDT 42-1491

• ON-OFF operation• 10AMP/250V, 15AMP/125V• Fits 7/8" x 11/2" hole

TABS ACTION ORDER NO.2 SPST 42-10454 DPDT 42-1048

• MAN-AUTO operation• 10AMP/250V, 15AMP/125V• Fits 7/8" x 11/2" hole

TABS ACTION ORDER NO.3 SPST 42-10476 DPDT 42-1050

• ON-OFF operation• 10AMP/250V, 15AMP/125V• Fits 7/8" x 11/2" hole

TABS ACTION ORDER NO.2 SPDT 42-10464 DPST 42-1049

• ON-OFF operation• SPST action• 10AMP/250V, 15AMP/125V• Fits 7/8" x 11/2" hole

TABS ORDER NO.2 42-17113 42-1712

Rocker Switches to Fit Blodgett

LIGhT BULBS & SWITChES

• HI-LO operation• 9 tabs• 3PDT action• 10AMP/250V, 15AMP/125V• Fits 7/8" x 11/2" hole

ORDER NO.42-1276

• Snap-in mounting• Fits 11/2" dia hole

ORDER NO.38-1325

• Wire leads• 2" mounting hole centers

ORDER NO.38-1326

• 50 watt• 120 volt

ORDER NO.38-1003

• Teflon coated• 40 watt• 230 volt

ORDER NO.38-1206


VOLT ORDER NO.208 34-1450240 34-1449480 34-1448

• 10,000 watt

VOLT ORDER NO.208 34-1199240 34-1200

• 2,000 watt

VOLT ORDER NO.208 34-1655240 34-1656480 34-1657

• 3,333 watt

VOLT ORDER NO.208 34-1658240 34-1659

• 10,000 watt

VOLT ORDER NO.208 34-1246240 34-1247

• 10,500 watt

Fits Blodgett

Fits Duke

Fits Vulcan

LOOKING FOR REPLACEmENT OVEN DOOR hARDWARE?

allpOINTS HaS:

• Handles• Chain Assemblies • Sprockets• Bearings and more

Call TO ORDER TODay!

ELEmENTS

• 5,000 watt• 208 volt

ORDER NO.34-1537


Door SpringsLENGTh BODY DIA. ORDER NO.SOUTHBEND315/16" 21/2" 15/16" 26-246463/4" 43/4" 11/4" 26-123363/4" 43/4" 11/4" 26-223463/4" 5" 11/4" 26-2971

VULCAN6" 42/3" 4/5" 26-39806" 41/2" 7/8" 26-12147" 53/8" 7/8" 26-1445

91/4" 61/8" 7/8" 26-1211

LENGTh BODY DIA. ORDER NO.BLODGETT

61/4" 31/2" 11/2" 26-225263/4" 43/8" 11/4" 26-22578" 43/4" 13/4" 26-2228

GARLAND61/4" 41/4" 1" 26-307761/2" 43/4" 1" 26-1219

JADE52/5" 33/8" 13/8" 26-2106

High Temperature Gaskets

OVEN GASKET BASICS

CHECK THE SEal - Located inside of the oven door is the gasket, which provides an airtight heat seal when the door is closed. A cracked or damaged section will allow heat to leak out of the oven, wasting energy and slowing the cook time of items in the oven. To check the seal, turn on the oven and allow it to heat up. Pass your hand around the outside of the door, without touching the oven, and if you feel heat escaping the gasket needs to be replaced. TypES OF gaSKETS - There are two primary types of oven door gaskets: silicone and fiberglass. Silicone can withstand the high temperatures of cooking, but not those of a self-cleaning feature. To increase the heat protection, fiberglass is used to coat the gasket making is suitable for a self-cleaning oven.

CHOOSINg a gaSKET When choosing a replacement gasket, the most important factors to account for are type and size. TypE - To determine type, simply identify if the oven does or does not have a self-cleaning feature. This will indicate whether to select silicone or fiberglass SIZE - Gaskets come in different lengths and are typically sold in rolls or by the foot to accommodate the different sizes of oven doors. To determine the required length, simply measure the old gasket and round up to the next foot when purchasing the replacement. This allows a few additional inches to be trimmed off during installation ensuring a proper fit.

• 5/8" wide x 7/16" high • 450°F temp. rating• Sold by the roll

ROLL LENGTh ORDER NO.10 ft. 32-144825 ft. 32-1449

SILICONE

GASKETS & DOOR SPRINGSSILICONE

• 5/8" wide x 1/2" high • 450°F temp. rating• Sold by the foot

ORDER NO.32-1447

SILICONE

• 3/4" wide x 9/16" high • 450°F temp. rating• Sold by the foot

ORDER NO.32-1211

FIBERGLASS

• 7/8" wide with 3/8" bead

• 500°F temp. rating• Sold by the foot

ORDER NO.32-1311


Baking Decks

STONES ThICKNESS STONE 1 STONE 2 ORDER NO.FITS BAKERS PRIDE OVENS

1 1" 251/4" x 293/4" N/A 28-18932 1/2" 173/4" x 171/2" 173/4" x 171/2" 28-13442 1/2" 2013/16" x 2013/16" 2013/16" x 2013/16" 28-13232 11/2" 243/4" x 353/4" 243/4" x 353/4" 28-11412 11/2" 12" x 36" 24" x 36" 28-1238

FITS BLODGETT OVENS2 11/2" 24" x 36" 24" x 36" 28-11412 11/2" 12" x 36" 24" x 36" 28-1238

GENERAL USE1 3/4" 137/8" x 171/2" N/A 28-1166

Oven Shelving

• Heavy Gauge Wire• Plated

W X D ORDER NO.BLODGETT 145/8" x 207/8" 26-2151 281/4" x 203/4" 26-1423GARLAND

26" x 193/4" 26-2283IMPERIAL

26" x 201/4" 26-3726MONTAGUE 263/4" x 257/8" 26-2222SOUTHBEND 251/4" x 25" 26-1425 255/8" x 255/8" 26-2242VULCAN 251/2" x 271/16" 26-1429 253/4" x 201/2" 26-1431 281/4" x 211/4" 26-1427

• Heavy Gauge Wire• Plated

W X D ORDER NO.GARLAND 26" x 201/2" 26-1239

26" x 251/2" 26-2301IMPERIAL 261/4" x 25" 26-3080 263/8" x 201/2" 26-2687

CUSTOM SIZES

• Replacement for cement asbestos boards and ceramic baking decks

• Temperature limit is 1000°F continuous use• Custom cut to size• Available in 1/2", 3/4", 1", and 11/2"

thicknesses

Call us at (800) 332-2500 for assistance

WITHOUT PRODUCT STOP WITH PRODUCT STOP

ShELVING & BAKING DECKS


mOBILIzE YOUR EQUIPmENT!

5" Diameter Plate Mounted Caster Kits

Kits contain:• (2) casters with brakes• (2) casters without brakes• (16) mounting screws

Floor Equipment Legs

• 5" wheel diameter• 6" equipment height• Polyurethane wheel

LOAD CAP. ORDER NO.STANDARD DUTY

1000 lbs. 26-4704HEAVY DUTY

1200 lbs. 26-4660

When purchasing a new range or oven, it will typically come with standard legs installed. While this is the least expensive way to purchase your range, it’s not the best option for your kitchen.

Equipment on fixed legs is difficult to properly clean around. Mobilizing your equipment with casters allows it to be moved for easier cleaning, leading to a safer kitchen.

When mobilizing equipment, here are a few things to keep in mind:

1. Always use aftermarket casters over OEM - they are less expensive and equal or greater in quality

2. Select a caster kit with 2 fixed casters for the back of your equipment and 2 rotating casters with brakes for the front. This will allow maximum maneuverability.

3. Be sure to install a positioning system in your kitchen like Safety-Set from Dormont (see page 23). Positioning systems are a NFPA code requirement and ensure your equipment can be returned to its design specified position under the fire suppression system after cleaning.

4. Always use a moveable grade gas connector such as those available from JetForce and Dormont. They are required any time a gas piece of equipment is mounted on casters.

CASTER KITS & LEGS

• 6" equipment height• 11/4" adjustment range• Nickle finish

ORDER NO.26-2439

• 6" equipment height• 15/8" body diameter• 13/4" adjustment range• Stainless steel

ORDER NO.26-2441


Wheel Placement Set

5" Diameter

4" Diameter

5" Diameter

• Keeps casters in proper place• Fits caster up to 17/8" wide• Set of 2

• 5" wheel diameter• 6" equipment height• 300 lb. load

capacity• Polyurethane wheel


capacity• Polyurethane wheel

• 4" wheel diameter• 5" equipment height• 275 lb. load capacity• Solid rubber wheel

CASTER ORDER NO.With Brake 26-2429Without Brake 26-2428



5" Diameter


capacity• Solid rubber wheel


ChOOSING ThE RIGhT CASTERThere are two primary options for wheel material when it comes to plate mount casters, polyurethane and solid rubber. When choosing a replacement wheel, consider the level of quality required for your range or oven and the price range.

Polyurethane Wheels Solid Rubber Wheels

Cost Medium to High Low

Quality High Low to Medium

Comparison

• Can withstand heavier weights• Typically NSF certified• Little to no absorption of cleaning

solutions and grease leading to longer life

• Tend to flatten out over time • Sometimes NSF certified• Rubber will absorb cleaning

solutions and grease decreasing the life of the caster

PLATE mOUNTED CASTERS

ORDER NO.28-1284


Add-On Broilers Add-On Griddle Tops

Economy Portable Griddle TopsDeluxe Portable Griddle Tops

Broiler Brushes

Replacement Brushes Replacement Blade

Grill Scraper

• Removable stainless steel grease tray• Heavy-duty angle iron construction• 7 gauge steel griddle surface• 27"L x 3"H• Grease tray adds 3" to length and is 11/2" deep

WIDTh ORDER NO.12" 76-115024" 76-1151

• Removable stainless steel grease tray• Heavy-duty angle iron construction• 24"L x 5"H• Grease tray adds 3" to length and is 11/2" deep

WIDTh ORDER NO.12" 76-114924" 76-1148

• 3/16" steel• 3/4"D x 23"L

WIDTh ORDER NO.14" 76-114723" 76-1155

• 29" handle

BRISTLES ORDER NO.Coarse 18-3300Fine 18-3301

BRISTLES ORDER NO.Coarse 18-3302Fine 18-3303

• Heat resistant handles• 3/16" steel• 1"D x 229/16"L

WIDTh ORDER NO.109/16" 76-1152229/16" 76-1145

COOK-TOP ACCESSORIES

• 141/16" long • 6" wide• Includes one blade

ORDER NO.85-1213

ORDER NO. 26-3687


• Restores and cleans stainless steel appliances quickly and easily

• Removes scratches, chemical stains, heat scorching, rust, scuffs and tape marks

• Dissolves grease and carbon build up quickly• Safe for aluminum and all metal surfaces• Not for use on plastic or painted surfaces

*Spray can

SIzE ORDER NO.19 oz.* 18-1449 1 qt. 18-1448 5 gal. 32-1928

• Stainless steel polish• Removes greasy films, water marks and fingerprints

*Spray can

SIzE ORDER NO.10 oz.* 32-1704 1 qt. 32-1703 1 gal. 32-1702

PROFESSIONAL KITTRIAL KIT

CLEANERS

ORDER NO.76-1238

ORDER NO.76-1239

Carbon-Off!

Sheila Shine

Scratch-B-Gone


OVEN mITTS: ThE DIRTY TRUTh

Quicklean ApronsSteam Gloves

• Liquid/vapor barrier• Washable• VaporGuard® material

LENGTh ORDER NO.36" 18-161842" 18-1619

• Water, steam & oil resistant• Non-slip grip• Sold by the pair

SIzE ORDER NO.14" LONGSmall 18-1608Medium 18-1605Large 18-1606X-Large 18-1607

SIzE ORDER NO.20" LONGSmall 18-1622Medium 18-1623Large 18-1624X-Large 18-1625

Ideal for lifting steam or hot food table pans

and stock pots

Have you ever thought of washing your hands before and after using an oven mitt? Most people don’t, but it can be a source of cross-contamination in the kitchen. Any food, oil, or perspiration on your hand when you use the mitt can be transferred to the next person and so on. Contamination also happens on the outside when it comes in contact with food or other substances and is then used on different pieces of equipment around the kitchen.

How can this problem be avoided?By using washable oven mitts and personal protection products from Tucker. Unlike quilted cotton products that are considered disposable because the flimsy material cannot stand up to laundering,

Tucker products are designed to last a minimum of ten times longer. That means improved sanitation in the kitchen and cost savings over time.

For oven and range applications, Tucker recommends the QuicKlean conventional style oven mitt or the BurnGuard conventional or puppet style oven mitt.

STEAm GLOVES & APRONS


Oven MittsSilicone Glove

Flame-Resistant Oven Mitts

• Nomex® outside with Kevlar thumb/finger area

• Flame resistant• Sold individually

LENGTh ORDER NO.15" 18-161718" 18-1601

• Three-finger• Poly/cotton sleeve with Kevlar hand• Flame resistant• 18" long• Sold by the pair

STYLE ORDER NO.Standard 18-1603Quicklean 18-1569

• Nomex® outside with Kevlar thumb/finger area

• Grease, steam & oil resistant• Sold individually

LENGTh ORDER NO.12" 76-30715" 76-306

• Water & steam resistant• Sold individually

LENGTh ORDER NO.15" 18-161518" 18-1616

STANDARD COTTON mITTS VS. TUCKER mITTSQUILTED COTTON mITT TUCKER PERSONAL PROTECTION mITT

Sanitation/Washing: Most cannot withstand laundering and are hard to sanitize vs. Can be laundered or hand-washed at sink, completely sanitize

Thermal Protection: Thermal protection diminished after washing vs. Thermal protection not altered by washing

Cost: Disposable product results in high repurchasing cost vs.Reusable and made to last a minimum of 10 times longer than quilted cotton mitts

Liquid/Vapor Protection: No effective barrier against hot liquid, grease, or steam vs.All BurnGuard Oven Mitts have VaporGuard, an effective liquid and vapor barrier against steam burns

NSF International Approval:

Not NSF International approved vs. All BurnGuard products are NSF International approved

OVEN mITTS & GLOVES

• Puppet style• Nomex® outside with Kevlar palm• 18" long• Flame resistant• Sold individually

ORDER NO.18-1604

• Three-finger• Water, steam & oil resistant• 18" long• Sold by the pair

ORDER NO.18-1600


IS YOUR OVEN KNOB LYING?

Digital Timers

Easy To Use• Hour, minute, and second adjustable• Color-coded lights• Memory recall• Large LCD

Commercial Grade• Antimicrobial housing• Water-resistant keypad and housing• Non-skid feet• Can be wall mounted• Uses 9 volt battery (included)

or AC adaptor (not included, No. 72-1665)

Did you know the actual temperature of an oven can vary widely from the temperature its set to? Cooking food at the intended temperature produces a better and more consistent product. A reliable oven thermometer will help you monitor the actual oven temperature and determine in maintenance is needed.

When selecting an oven thermometer, AllPoints suggests a dial face with easy-to-read numbers. It’s also a great idea to consider one that can hang or stand for maximum versatility, such as these.

TImERS & ThERmOmETERS

• (8) separate timers• 20-hour countdown or count up• Programmable labeling

ORDER NO.72-1663

• (4) separate timers• 10-hour countdown or count up

ORDER NO.72-1662

• 200° to 550°F

ORDER NO.62-1024

• 150° to 550°F • 5 Year Limited Warranty

ORDER NO.62-1147

(800) 332-2500 fax: (800) 227-1511 AllPointsFPS.com

Parts research can be difficult and time consuming for even the most experienced service tech. We’ll do the research saving you time and hassle.

With 4 locations nationwide, AllPoints has 1-2 day ground delivery to 90% of the country. Get the part you need, when you need it.

Select to have packages sent direct to you with the shipper listed as AllPoints or direct to your customer with the shipper listed as you. The choice is yours!

No need to estimate your freight cost anymore! AllPoints can provide exact freight costs at the time of quote, allowing you to select the shipping option that best fits your needs.

FLORIDA9550 Satellite Blvd, Suite 145Orlando, FL 32837

Counter hours: M-F7:30am - 5:30pm EST

Shipping cutoff: 5:30pm EST

NEVADA839 Pilot Rd, Suite ALas Vegas, NV 89119

Counter hours: M-F7:00am - 5:00pm PST

Shipping cutoff: 5:45pm PST

ILLINOIS607 W Dempster StMount Prospect, IL 60056

Counter hours: M-F7:30am - 5:00pm CST

Shipping cutoff: 5:30pm CST

NEW JERSEY101 Mt. Holly By-PassLumberton, NJ 08048

Counter hours: M-F (will call only)8:00am – 5:00pm EST

Shipping cutoff: 5:30pm EST

(800) 332-2500 fax: (800) 227-1511 AllPointsFPS.com

Rev. 8/14

OVENS & RANGES · • Brass body, carbon steel threaded end fittings, aluminum collar • Thermal...

Documents

Transcript of OVENS & RANGES · • Brass body, carbon steel threaded end fittings, aluminum collar • Thermal...