OTHER SPRAYER COMPONENTS · OTHER SPRAYER COMPONENTS TG25BG Trailer sprayer, 25 US gal., 12 V...

OTHER SPRAYER COMPONENTS

Fax Toll-Free 877 [email protected] � [email protected]


111

Manuels Pressure Relief and Regulating ValvesManuels Pressure Relief and Regulating ValvesPiston-Type Pressure Relief/Regulating ValvesBypasses excess liquid. Adjustable to maintain control of line pressure at any pressure within the valve’s operating range.Selected pressure setting firmly held in place by locknut. Extra large valve passages to handle large flows.

JB-2312012PP 1/2 Polypropylene 100 PSIJB-2312034PP 3/4 Polypropylene 100 PSIJB-23120A12PP 1/2 Polypropylene 100 PSIJB-23120A34PP 3/4 Polypropylene 100 PSI

PARTS NO. INLET & PIPE MATERIAL PRESSURE RANGECONNECTIONS

Model 23120� Stainless steel spring� Excellent chemincal resistance� 1/4”- blind port for pressure gauge

to be drilled by customer

Model 23120� Same as 23120 but with 316SS spring

and Viton o-ring

JB-68151250 1/2 Brass 50 PSIJB-681512300 1/2 Brass 300 PSIJB-681512700 1/2 Brass 700 PSIJB-681534300 3/4 Brass 300 PSIJB-681534700 3/4 Brass 700 PSI


Model 6815� Other models for high pressures

up to 1,200 PSI (82 bar) are also available.� Brass also available with hardened

stainless steel seat.

JB-1101450 1/4” Brass 50 PSIJB-11014300 1/4” Brass 300 PSIJB-11014700 1/4” Brass 700 PSIJB-110141000 1/4“ Brass 1000 PSIJB-11038300 3/8“ Brass 300 PSIJB-11038HSS1200 3/8“ HSS 1200 PSIJB-110112BR 1 1/2” Brass 150 PSIJB-110112AL150 1 1/2“ Aluminium 150 PSI


Model 110� Removable bonnet for servicing unit

without removing valve from line.

Diaphragm - Type Pressure Relief / Regulating ValvesModels 8460� Flow rate to 56 GPM/212/min for 1/2” and 70 GPM/265 l/min for 3/4”� Stainless steel springs, responsive to the pressure range of each valve� Extra-large valve passages to handle full flow from supply line� Positive lock nut to hold adjustment screw firmly in place. Not affected by jarring and vibration.� Made of quality materials-choice of brass, aluminium, ductile iron and nylon as listed in tables.

Inlet body BonnetJB-84601250 1/2 Brass 50 PSIJB-846012300 1/2 Brass 300 PSIJB-846034300 3/4 Brass 700 PSI


PI-FA-2008_Catalogue:Mise en page 1 2009-03-06 09:39 11


112



Hypro UnloadersHypro Unloaders

JB-9910GS40GI� Control unit 15 GPM, 550 PSI, with relief valve and two 1/2" outlets.

JB-9910GS50GI� Control unit 51 GPM, 850 PSI, with relief valve and two 1/2" outlets.

ARAG Pressure regulating valvesARAG Pressure regulating valves

MP-465542� 1”manual regulating valve, 1 outlet, 290 psi,

53 gpm (200 l/min).

Contrôles ARAG ControlsContrôles ARAG Controls

MP-CM4613� 3-section manual control, pressure regulator, 300psi,

pressure gauge, 3/4" outlets.

MP-463CMA3� 3-section manual control, pressure regulator, 300 psi, pressuregauge,

boom compensator,manual valve for agitation, 3/4" outlets.

PI-FA-2008_Catalogue:Mise en page 1 2009-03-06 09:40 Page 112




113

Control ValveControl Valve

MS-17L Aluminum, Polymer, SS 300 PSI (20 bar) 3/4”NPT 3/4” (F) 3/4” (F)

PARTS NO. MATERIAL MAXIMUM INLET (3) BOOM ACCESSORYPRESSURE OUTLETS OUTLET

For selective control of three-section boom sprayers at pressures up to 300 PSI (20 bar).

� Use to open any of three boom section lines in any desired combination.� Raise lever to open, lower lever to close the valve without changing the indexed position.� Aluminium construction with stainless steel and plastic internal parts for maximum corrosion resistance

Foot Valve (no return valve)Foot Valve (no return valve)

MP-504014 1 1/2” x 1 1/4”MP-504010 1 1/4”MP-504015 1 1/2”MP-504019 2”

PARTS NO. SIZE



114



FlowMeter For Liquid TransferFlowMeter For Liquid Transfer

MP-4622BA67717

ARAG Electro-magnetic flow meter (30 to 60 litres/minute),measures in

litres or US gallons, 290 psi, QC 2”male inlet,MNPT 2”outlet.

MP-4622BA500002

ARAG Module for the stop of a filling pump when reach of a pre-set

quantity of liquid (to connect to a 12V shut-off valve)

MP-46237140

ARAG Electro-magnetic flow meter of 10 to 200 litres/minute),

290 psi, flanged inlet and outlet.

MP-46237250

ARAG Electro-magnetic flow meter of 20 to 400 litres/minute),

290 psi, flanged inlet and outlet.

AU-TM200

GPI 2”FNPT PVC flow meter, 140°F, 76 to 757 litres/minute, 150 psi

GG-SEM10

SCIENCO 1”MNPT polypropylene flow meter,

2 cumulative totals, 2 to 30 gpm, 60 psi

GG-SEM30

SCIENCO 1”MNPT stainless steel flow meter,

Viton joint, 3 cumulative totals, 20 gpm, 100 psi, 1”

BJ-MFM220

BANJO 2”Full port flow meter,magnetic style meter, no moving parts to

fail during use, digital readout in metric or english, self calibrating

meter-measures all viscous liquids





115

MS-SELHYD3FJGCRH

3 funcion selection type electro-hydraulic control

with Joystick, 40’ of electric cable, 2 one-way CV, 2

two-way check valve

AR380-0010

5 funcion selection type electro-hydraulic control

with cartridges, Joystick, 40’ of electric cable

AR380-0011

7 funcion direct acting electro-hydraulic control

withcartridges, Joystick, 40’ of electric cable,

diverter valve included

Electro-hydraulic controlsElectro-hydraulic controls



116



SpreadersSpreaders

EA-C2300APPTow behing 50 lbspreader

EA-C2500PTow behing 100 lb spreader,steel painted frame,commercial use, bearing axle

EA-C24HDS100 lb commer-cial spreader withstainless steelframe andbearing axle

EA-C24HD100 lb commercialspreader withbearing axle

EA-C22HD50 lb commercialspreader withbearing axle

EA-C2200S50 lbcommercialspreaderwith stain-less steelframe andbearing axle

OPTIONSide deflector andcoverEA-2218 C2200-2150Tseries

EA-2318 C2300 series

EA-2418 C2300-2400series

EA-2518 C2300-2500series

EA-2000A40 lb residentialuse spreader

EA-310040 lbportablespreader

OPTIONEA-60166, 3-sideddeflector

EA-2100P50 lb,semi-commercialspreader





117

HS-4V� Hand sprayer with padded shoulder strap� White tank of 1.06 US gal - 4 L, with pressure release valve and a filling funnel� Internal piston pump� Pump & gun piston are fitted with VITON O-rings to offer great compatibility with chemical products� Wand-gun with 21”adjustable nozzle� Packed in a cardboard box

HS-7V� Hand sprayer with padded shoulder strap� White 1.85 US gal. - 7 L tank, with pressure valve and a filling funnel� Internal piston pump� Pump & gun piston are fitted with VITON O-rings to offer great compatibility with chemical products� Wand-gun with 21”adjustable nozzle� Packed in a cardboard box

SX-507815� Hand sprayer� White 0.4 US gal. - 1.5 L tank� Internal piston pump� Adjustable nozzle

BP-15V� Backpack sprayer with adjustable padded shoulder straps� Blue polyethylene 4 US gal. - 15 L tank� Internal piston pump fitted with VITON O-rings to offer great compatibility with chemical products� Easy operating pumping lever on left or right side� 36” rugged spray gun with 4 different nozzle and 59’ hose� Pump & gun repair kit included� Packed in a cardboard box, 16 1/2” x 7 1/4” x 23 1/4” (42 x 18.5 x 59 cm)� Empty weight of 10.75 lb - 4.9 kg� Loaded weight of 43.75 lb - 19.9 kg

BP-15E� Backpack sprayer with adjustable padded shoulder straps� Blue polyethylene 4 US gal. - 15 L tank� 12 VDC pump,VITON valve & diaphragm, recommended pressure while in use between 35 to 45 psi

depending on the nozzle� 12 VDC built in rechargeable battery, provides more than 8 hour autonomy� 120 Vac battery charger� Automatic alarm when voltage is low� 36” rugged spray gun with 4 different nozzle and 59’ hose� Packed in a cardboard box, 16 3/4”x 7”x 22”(42.5 x 17.5 x 55.5 cm)� Empty weight of 19 lb - 4.1 kg� Loaded weight of 52 lb - 19.1 kg

Portable sprayersPortable sprayers



118



Contact herbicide stickContact herbicide stick

AU-BATHPerfect for small hand applicationsContact herbicide stick (hockey size)

AU-18000

Safety goggles

AU-37175Nitrile glovesSOLVEX D

AU-70320 (large)Smock to protect against pesticides

SecuritySecurity





119

Protective clothing against chemical productsAU-58102

medium

AU-58103

large

AU-58104X-large

AU-7700CFace shield against pesticides

AU-K80ST8NGSafety helmet against pesticides, including batteryand filter on waistband

AU-PROF88Safety helmet against pesticides,including battery and filter on helmet

AU-76008CFace shield (silicone) with visor, protection against chemical products,2 filters for maximum air circulation

AU-76008ECFace shield (elastomer) with visor, protection against chemical products,2 filters for maximum air circulation



120



JB-33760002For use on field sprayer cultivator planter

� Easy to install, and the four column units can be mounted in multiples to fit any application� Helps prevent misapplication of important herbicides, pesticides and fertilizers� Keeps application rates even among rows� Applicable for different flow rates and different liquids

JB-CP90004C Complete kitIncludes : banding hood, universal mounting brackets, stainless steel tube, nozzle fittings

� Constructed of 3/16”high impact poly� Universal mounting hardware� Rubber bunge provides hood flexibility

4-column JB-33760005Inlet-outlet 1/2”

2-column JB-33760007Inlet-outlet 1/2”

JB-399934341 columninlet-outlet 3/4”HB

JB-399900101 inlet, 4 outlets 3/4”HB

JB-399934121 column (starter / départ)inlet 3/4”outlet 1/2”HB

JB-399900121 inlet (add / ajoût)outlet 1/2”HB

Planter banding-hood Redball JB-CP90004CPlanter banding-hood Redball JB-CP90004C

Spray monitor JB-33760002Spray monitor JB-33760002

Spray monitor JB-33760005, JB-33760007Spray monitor JB-33760005, JB-33760007

Modular spray monitor JB-39993434, JB-39990010Modular spray monitor JB-39993434, JB-39990010

Modular spray monitor JB-39993412, JB-39990012Modular spray monitor JB-39993412, JB-39990012





121

Glycérine Liquid gaugesGlycérine Liquid gauges

Port : 1/4" MNPT G * : glycerineS * : sec/dry

PPaarrtt NNoo.. OOuuttlleettssJB-025FF00060 60JB-025FF00100 100JB-025FF00160 160JB-025FF00300 300JB-025FF00600 600JB-025FF01000 1000JB-025FF02000 2000JB-025FF03000 3000JB-025FF05000 5000JB-025FF10000 10000JB-025FF3030 (vaccum) 30 ±JB-025FFSS00060 (stainless) 60JB-025FFSS00160 (stainless) 160JB-025FFSS00300 (stainless) 300JB-025FFS05000 (stainless) 5000

2-1/2” / 2-1/2” SIDE MOUNT

PPaarrtt NNoo.. OOuuttlleettssJB-025FFBC00030 30JB-025FFBC00100 100JB-025FFBC00160 160JB-025FFBC00300 300JB-025FFBC00600 600JB-025FFBC02000 2000JB-025FFBC03000 3000JB-025FFBC05000 5000

2-1/2” / 2-1/2” BACK MOUNT

PPaarrtt NNoo.. OOuuttlleettssJB-025FF001004G * 100JB-025FF003004G * 300JB-025FF003004S * 300

4” / 4” SIDE MOUNT

Teflon TapeTeflon Tape

AU-TEF12260SS Grey teflon tape for stainless steel 1/2 x 260”AU-TEF12480 Teflon tape 1/2 x 480”AU-TEF1248012 Teflon tape 12 rolls pkg 1/2 x 480”

PARTS NO. DESCRIPTION



122



JB-CP24034PPTeeJet calibration container, 1.8L

JB-38560TeeJet wind meter

JB-CP20016NYTeeJet cleaning brush

JB-37670TeeJet tip tester with tip cleaningbrush

Features

� Allows small pumps to circulate large volumes of liquid� Manufactured of glass filled polypropylene for excellent corrosion and chemical resistance� Large flow opening minimizes plugging� Available in 3/4" thread inlet connection

MP-502010

MP-502020

AU-POT4.5LCalibration container, 4.5L

Calibration kitCalibration kit

JB-203012 Water sensitive spray paper 2" x 3" cards; 50 cards/pkgJB-203021 Oil sensitive spray paper 2" x 3" cards; 50 cards/pkg


JB-33710028 Eductor nozzleJB-33710028 Eductor nozzle

MP-502010 1.2 mm stainless 90° Hidht Capacity Hydraulic Agitator 1/2”MP-502020 1.2 mm stainless Straight High Capacity Hydraulic Agitator 1/2”

PARTS NO. ORIFICE DESCIPTION SIZE

PI-FA-2008_Catalogue:Mise en page 1 2009-03-06 09:42 2




123

BAR 1.5 2 2.5 3 4 5

PSI 22 29 36 44 58 73

l/min 41 47 52 57 67 77

US GPM 11 12 14 15 18 20

10 20 30 40 50psi psi psi psi psi9 12.7 15.6 18 20 360º

MP-510120

Typical Application

Tank rinsing nozzlesTank rinsing nozzles

JB-552703418POM

� Rotating head driven by the flow of the rinsing liquid through multiple round spray orifices� Solid stream sprays are precisely positioned to provide effective internal wetting and cleaning of tank surface� Removable retainer and rotating body allows for disassembly and cleaning� Provides 360° coverage of inside surface of tank for tank diameters up to 10 feet (3.0 m)� Self-lubricating and self-flushing design� Materials: Body - black POM (acetal); Fasteners - stainless steel� Recommended operating pressure 10 -50 PSI (0.7 - 3.5 bar)� Mounting connection - 1/2” or 3/4” NPT or BSPT (F)

CAPACITY - GPM TYPE OF COVERAGE SPRAY ANGLE

1/2” FNPT, 4 1/2” H, 360° COVERAGE



124



Gunjet # JB-43L : Brass, complete, for pressures up to 125 PSI

Gunjet # JB-43LAAL6 : Aluminum, complete, for pressures up to 125 PSI, 12” tube

Gunjet # JB-43H8BR : Brass, complete, for pressures from 125 to 300 PSI, 15” tube

Gunjet # JB-43HAAL6 : Aluminum, complete, for pressures from 125 to 300 PSI, 12” tube

JB-AB43 : Spare parts kit

JB-AB43AL : Spare parts kit

Model 43 is a versatile trigger type spray gun. All models have 1/2" NPT(F) inlet connections.Fingertip pattern adjustment. Ideal for spraying weeds, brush, fruit trees, livestock, cleaningbarns, etc.

Features

� Trigger lock� Drip free shut-off� Adjustable wide angle cone spray to straight stream spray

Type 43LC1/2, 43HC1/2 , 43LC3/4 and 43HC3/4 Gunjet spray guns.

Types 43LC1/2 and 43HC1/2 have 1/2" NPT(F) outlet connections.

Type 43LC3/4 and 43HC3/4 have 3/4" NPT(F) connections

Model 2Ideal for hand spraying fruit trees, weeds & brush.

� Brass and aluminum, 15” tube� 3/4" garden hose thread (F) inlet connection

Model 18Ideal for hand spraying fruit trees, weeds & brush.

� Auminum, 12” tube� 1/4" NPT (F) inlet connection

These guns offer long-range capability, which makes them excellent for tree spraying, fire fighting and de-icing. The JB-33810010 comes standard with a 3 mm spray tip; the JB-33810011 comes standard with a 4.5 mm spray tip.

GUN AND ACCESSORIESGUN AND ACCESSORIES

JB-43 Trees and bushes gunJB-43 Trees and bushes gun

JB-AA2A30 BrassJB-AA2AL30 Aluminum

PARTS NO. MATERIAL

JB-33810010, JB-33810011 Spray gunsJB-33810010, JB-33810011 Spray guns

SpecificationsMaximum pressure 1200 psiMaximum capacity /JB-33810010 25 gpmMaximum capacity /JB-33810011 30 gpmBarrel length /JB-33810010 17"Barrel length /JB-33810011 21"Port - NPT 1/2" inlet (M)

JB-33810010JB-33810011

PARTS NO.

NOTE : Guns come with 1/2" hose barb inlet, simplyremove hose barb for 1/2" (M) inlet

JB-18AL6

PARTS NO.





125

JB-22670 Spray gunsJB-22670 Spray guns

Spray gun with extension, strainer and tip features

� Lightweight design for use with backpack, canister or other low pressure systems� Replaceable viton diaphragm� Trigger lock� 5 PSI required to open - Maximum pressure 150 PSI� Made of molded polypropylene.

JB-22670PP15VI Viton 15”JB-22670PP24VI Viton 24”

PARTS NO. SEAL LENGTH

JB-22650PP Spray gunsJB-22650PP Spray guns

JB-22650PP Trigger JET spray gun, polypropelene


5500Knurled body of tip rotates through a half turn to provide spray selection from wide angle,finely atomized cone spray to a straight stream spray.

5500-PPThe 5500 adjustable ConeJet tip is also available in a polypropylene version. The polypropylene tip has the same performance characteristics as the brass tip andprovides excellent chemical resistance. This tip’s light weight makes it well-suited for use onhandheld and backpack type sprayers.

JB-5500PPB__ Adjustable ConeJet tip only -PolypropyleneJB-5500X__ Adjustable ConeJet tip only - Brass


JB-38720PP Adjustable spray tipsJB-38720PP Adjustable spray tips

� Fits any 11/16" TeeJet male thread bodies� 30º offset from horizontal incorporated into main tip

JB-38720PPX8 Adjustable spray (solid or cone spray), polypropylene 150JB-38720PPX12 Adjustable spray (solid or cone spray), polypropylene 150

PARTS NO. DESCRIPTION MAX PSI

JB-5500 Adjustable ConeJetJB-5500 Adjustable ConeJet



126



JB-6466VITrigger Valve

� With trigger lock.� Max. flow 2 GPM� Max. pressure 250 psi� 1/4" NPT (F) inlet conn.� 11/16" - 16 (M) outlet connection� Viton

JB-6104Trigger Valve

� With trigger lock� Same as JB-4688 except with

1/4" NPT (F) inlet & outletconnections

� Brass

JB-31 Gunjet � Max pressure 500 psi� 1/4 MNPT inlet� Brass

JB-13212Garden HoseAdapter for 36 Valve

� 3/8" NPT (M) outlet� 3/4" garden hose thread

inlet for use with 3/8" 36 valve

Trigger valvesTrigger valves

JB-1321238 3/8”JB-1321212 1/2”

PARTS NO. Size

AccessoriesAccessories

JB-77158 8" Straight extension

JB-771518 18" Straight extensionJB-771518PL 18" Curved extensionJB-771524 24" Straight extensionJB-771524PL 24" Curved extensionJB-771536 36" Straight extensionJB-771548 48" Straight extensionJB-467324 24" Curved extension with adjustable bodyJB-467618NY 1/8" NPT adapter, nylonJB-467614B 1/4" NPT adapter, brassJB-467614NY 1/4" NPT adapter, nylonJB-467638B 3/8" NPT adapter, brassJB-11740B 3/4" garden hose swivel, brassJB-119909 1/4" MNPT x 1/4" FNPT swivel, brassJB-1199010 1/4" FNPT x 1/4" FNPT swivel, brassJB-1199014 3/8" FNPT x 3/8" FNPT swivel, brassJB-1199016 3/8" MNPT x 3/8" FNPT swivel, brassJB-1199017 1/2" FNPT x 1/2" FNPT swivel, brassJB-1199019 1/2" MNPT x 1/2" FNPT swivel, brass


AS-1030 Thermoplastic fireman-nozzle 1” FNPT 11 GPM at 100 PSIAS-1575 Thermoplastic Fireman-nozzle 1 1/2” FNPT 80 GPM at 100 PSI


AS-346 6” brass nozzle, 3/4” FNPT, Hole 1/4”AS-11410 10” brass nozzle, 3/4” FNPT, Hole 1/4” AS-21258 12” brass nozzle, 2” FNPT, hole 1/2”


Trigger Valve ExtensionsLes tip, straineer and cap

Spray Gun Accessories

JB-4673

JB-7715

JB-4676

JB-11740B

JB-11990





127

Features

� Flow rates up to 5 GPM� Maximum pressure - 1500 PSI / JB-30, 150 PSI / JB-30L� Outlet connection 11/16 TeeJet thread� Body & trigger molded tough nylon / JB-30, polypropelene / JB-30L

Features

� Flow rates up to 5 GPM� Maximum pressure - 250 PSI� Strong aluminum body� Extension equipped with valve stem for drip-free shutoff immediatly behind spray tip

# JB-30 / JB-30L

# JB-23H# JB-23L

LE-007433 Lawn gun without nozzle

JB-25660 Lawn spray gunsJB-25660 Lawn spray guns

JB-256600 TeeJet lawn spray gun without nozzleJB-CP2567015NY Gray nozzle for TeeJet lawn spray gun, 1.5 gpmJB-CP2567030NY Black nozzle for TeeJet lawn spray gun, 3 gpmJB-CP2567040NY Red nozzle for TeeJet lawn spray gun, 4 gpmJB-2599034 Hose shank swivelJB-25657NY Lawn gun adapterJB-2266515PP TriggerJet extension 15 ftJB-2266524PP TriggerJet extension 24 ftJB-CP22673PP Elbow adaptor 45 deg. 11/16JB-CP22664PP Straight Adaptor polypropylene


JB-30, JB-23 Spray gunsJB-30, JB-23 Spray guns

JB-30 Without extensionJB-23L Without extensionJB-23H Without extension


Features

� Nozzle tips provide a 45º full cone “showerhead” spray pattern� Convenient trigger lock - Maximum pressure 150 psi� Options available - Inlet hose shank swivel, extension wand and adapters for low volume and spot spraying

JB-2599034 JB-25657NY

JB-CP2567040NY

JB-22665

JB-256600

JB-CP2567030NYJB-CP2567015NY

JB-CP22664PP

JB-CP22673PP



128



18” gun with adjustable nozzle # x18,

inlet of 3/8” FNPT

MP-26901162Adjustable fog gun,1.5 nozzle, inlet of 1/2” FNPT

MP-506531VPolypropylene (viton) pouring nozzle gun

GG-JD9CStainless steel gun, “L” adjustable nozzle

MP-2919039Gun, 18 gpm, inlet/outlet 1/2” FNPT

JAC-761882 20” plastic windcone

MS-FU18A18 GunMS-FU18A18 Gun





129

JB-5080021AL406JB-5080021AL406

Features

� Available with 15” (381 mm) polypropylene or 21” (533 mm) aluminum extension wand.� Available with 38720-PPB-X18 or X26 adjustable ConeJet® tips with a 30° offset.� Trigger lock permits locking gun in an open position for continuous flow� Maximum operating pressure of 100 PSI (7 bar)� 1/4” or 3/8” hose shank connection.� Approximate max. hose O.D. — 1/2” (13mm).� Polypropylene strainer located inside handle to prevent tip clogging

Gun with 30” to 48” aluminium telescopic lance, viton, hose inlet of 1/4” and 5/16”

MP-W500 Telescopic gunMP-W500 Telescopic gun

Model 50800

The 50800 TriggerJet spray gun is a lightweight spray gun designed for use with backpack,canister or other low-pressure sprayers. The TriggerJet is made of molded polypropylene forexcellent chemical resistance and durability.

AU-ST1200 Spray gunAU-ST1200 Spray gun

Brass gun for wash, caoutchouc covered,

1/2” FNPT, 27 gpm, 350 psi, 100°F



130



TG25BGTrailer sprayer, 25 US gal., 12 V Shurflo diaphragm pump, 1.8 gpm, 45 psi, boom covering 6’ wide, 20’ hose and 30” spray wand with adjustable cone nozzle can spray upto 20’ depending on spray nozzle adjustment. Allow 20 minutes for assembly.

Dimensions : 65”L x 22”W at ground x 26”HEmpty weight: 61 lb

MS Lawn & Garden SprayersMS Lawn & Garden SprayersLG151GStationary sprayer, 15 US gal., diaphragm pump, 1 gpm, 40 psi, 15’ hose and 30” spraywand with adjustable cone nozzle can spray up to 18’ depending on nozzleadjustment.

Dimensions : 34”L x 15”W x 13”HEmpty weight: 16 lb

LG251GStationary sprayer, 25 US gal., diaphragm pump, 1 gpm, 40 psi, 15’ hose and 30” spraywand with adjustable cone nozzle can spray up to 18’ depending on nozzleadjustment.


MS-RBS72Boom for LG151G - LG251G sprayers, one #05 nozzle covering 6’ wide to be installedat the back of ATV. To be connected at the same place as the gun.

ST95KStationary sprayer, 25 US gal., diaphragm pump, 1.8 gpm, 45 psi, 20’ hose and 30” spraywand, adjustable cone nozzle can spray up to 20’ depending on spray nozzle adjust-ment.


Option : 100 psi pump, regulator with pressure gauge, remote switch,# MS-ST95KOPT100

Option : 150 psi pump, regulator with pressure gauge, remote switch,# MS-ST95KOPT150

Option : Spraying boom, one #05 nozzle covering 6’ wide to be installed at the back of ATV. To be connected at the same place as the gun,# MS-RBS72K

MS-RBS72KBoom for ST95K, one #05 nozzle covering 6’ wide to be installed at the back of ATV.Ball valve on feed line allows to use spray gun.


OTHER SPRAYER COMPONENTS · OTHER SPRAYER COMPONENTS TG25BG Trailer sprayer, 25 US gal., 12 V...

Documents

Transcript of OTHER SPRAYER COMPONENTS · OTHER SPRAYER COMPONENTS TG25BG Trailer sprayer, 25 US gal., 12 V...