Orthographic Projection Ortho 1.2 - Walkthrough
description
Transcript of Orthographic Projection Ortho 1.2 - Walkthrough
Orthographic Orthographic ProjectionProjection
Ortho 1.2Ortho 1.2 - Walkthrough - Walkthrough
GOAL:GOAL: Ortho 1.2 Ortho 1.2
Orthographic Orthographic ProjectionProjection
Creating a 1-View Drawing
Layout Sheet
Prepare a Layout Sheet
Orthographic Orthographic ProjectionProjection
Creating a 1-View Drawing
Center the Object
1.) Draw Inclined, Vertical, & Horizontal Lines
2.) Box-in the Object3.) Calculate the Box Size
4.) Center the Rectangle in the Workspace
Orthographic Orthographic ProjectionProjection
Creating a 1-View Drawing
Construct the Object
Starting at the top left corner of the box,
measure on the HORIZONTAL line to the right 3” and put a mark.
From that mark measure right 1 ½” and put a mark.
Make a VERTICAL line from each mark to the bottom horizontal line.
Starting at the top left corner of the box, measure on the VERTICAL line down 1 ½” and put a
mark.
From that mark measure down 2” and put a mark.
Make a HORIZONTAL line from each mark to the right vertical line.
Starting at the top left corner of the box,
measure on the HORIZONTAL line to the right 1 ½” and put a mark.
Make a VERTICAL line from each mark to the bottom horizontal line.
Complete the drawing using OBJECT LINES.