OperatingCharacteristics Us Motor
7
www.nidec-motor.com www.usmotors.com VERTICAL MOTORS CONVERSION CENTER LONG TERM STORAGE INFORMATION OPERATING CHARACTERISTICS DIMENSION PRINT INDEX DRIVE COUPLING PART NUMBERS DIMENSION PRINTS HP RPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS) 460 VOLTS TORQUE AT FULL VOLTAGE (FT.ILBS.) NEMA CODE FULL LOAD LOCKED PULLOUT TORQUE @ (STARTING) BREAKDOWN NO LOAD FULL LOAD FULL LOAD 3/4 LOAD 1/2 LOAD FULL LOAD 3/4 LOAD 1/2 LOAD FULL LOAD LOCKED STARTING FULL LOAD SPEED % OF FULL LOAD 7.5 1200 1175 86.5 87 85.4 78.9 72.3 60.6 10.3 57.7 33.5 188 263 G 10 1200 1175 87.5 88.7 87.7 80.8 75.2 64.4 13.2 73.1 44.8 188 256 G 15 1800 1770 89.5 91.1 90.2 83.9 79.2 69.6 18.7 114 44.5 210 270 G 1200 1175 88.5 90.2 89.8 81.8 77.5 68.1 19.4 99.9 67 169 234 F 20 3600 3540 88.5 89.8 89.1 88.6 87 81.5 23.9 150.4 29.7 169 246 G 1800 1768 89.5 91.5 91.3 85.6 83 75.8 24.3 135 59.5 194 244 F 1200 1170 88.5 90.6 90.7 84.1 81.6 74.8 25.2 126 89.6 161 218 F 25 3600 3535 89.5 91.1 90.7 87.8 87.3 83.3 29.8 180 37.2 154 225 G 1800 1765 88.5 90.7 90.6 83.1 79.2 69.8 32 177 74.5 203 249 G 1200 1175 87.5 89.6 89.5 84.4 82 75.1 32 190.3 111.6 167 220 G 30 3600 3525 88.5 91.2 90.9 88.2 86.8 81.8 36 214.2 44.7 168 231 G 1800 1760 90.2 91.8 91.9 85.3 82.7 75.2 37 204 89.5 197 246 F 1200 1175 87.5 89.6 90 85.4 83.6 77.6 38 234.3 133.9 178 221 G 40 3600 3515 90.2 92.2 92.3 89.5 89.2 86 46 288.4 59.7 178 241 G 1800 1780 89.5 91.1 90.6 85.7 82.8 75.1 49 267 118.2 163 219 F 1200 1175 88.5 91 91.4 84.3 82.3 75.5 50 295.9 179.1 179 219 G 50 3600 3550 88.5 89.7 88.2 86.7 82.9 76 61 358 74 172 264 G 1800 1775 90.2 91.4 91 85 81.4 72.8 61 353 147.7 176 233 G 1200 1175 90.2 92.2 92.6 86.8 85.2 79.4 60 371.8 223.7 193 228 G 60 3600 3545 89.5 90.5 89.7 88.7 88.4 85 71 427 88.9 191 266 G 1800 1775 90.2 92.1 92.1 87.1 85.3 79 71 406 177.5 175 223 F 1200 1175 89.5 90.9 90.8 86.1 82.9 74.9 73 476.3 268 182 270 H 75 3600 3540 89.5 90.9 90.5 88.7 88.4 85 89 541.3 111.2 184 252 G 1800 1775 91.7 93 93 86.6 84.6 78.3 88 527 222 189 236 G 1200 1170 89.5 91.2 91.4 88.3 86.8 81.9 89 587.4 336.2 188 273 G 100 3600 3535 91 92.5 92.4 89.3 90 88.2 115 663 148.6 184 252 F 1800 1780 93 93.8 93.5 85 82.6 75.7 119 709.9 295.1 182 216 G 125 1800 1780 93 93.9 93.8 85.9 83.7 77.1 147 919 369.1 191 221 G 150 1800 1775 92.4 93.5 93.6 88.9 87.9 83.4 171 1015.6 443.3 163 207 F 200 1800 1775 94.5 95.4 95.3 88.2 87.2 82.8 225 1219 591.2 150 201 E 250 1800 1775 94.5 95.2 95.1 87.9 86.8 82.2 282 1725 739.6 153 204 F 300 1800 1780 94.5 95.5 95.5 89.2 88.9 85.6 333 2200 884.7 0.80 175 G 350 1800 1780 94.5 95.7 95.8 89.5 89.3 86.2 387 2550 1032.7 80 175 G 400 1800 1785 95.4 96.1 96.0 90.3 90.3 87.8 435 2856 1176.6 101 248 G 500 1800 1780 95.4 95.9 95.7 88.6 88.4 85.3 554 3625 1474.7 109 235 G 600 1800 1770 95 95.9 96.0 89.8 89.5 86.4 659 4733 1780.1 60 175 G 25 Operating Characteristics - Vertical HOLLOSHAFT® Motors High Thrust - “P” Base, Three Phase, Weather Protected Type (WPI), Standard Efficient Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group. The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code. When performance values have been quoted, they should be shown on the order. Data subject to change without prior notice.
-
Upload
sabrinahely -
Category
Documents
-
view
3 -
download
0
Transcript of OperatingCharacteristics Us Motor
www.nidec-motor.comwww.usmotors.com
VERTICALM
OTORSCONVERSION
CENTERLONG TERM
STORAGEINFORM
ATIONOPERATING
CHARACTERISTICSDIM
ENSIONPRINT INDEX
DRIVE COUPLINGPART NUM
BERSDIM
ENSIONPRINTS
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
460 VOLTS
TORQUE AT FULL VOLTAGE (FT.ILBS.)
NEMA CODE
FULL LOAD LOCKED PULLOUTTORQUE @ (STARTING) BREAKDOWN
NOLOAD
FULLLOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
LOCKEDSTARTING
FULL LOADSPEED % OF FULL LOAD
7.5 1200 1175 86.5 87 85.4 78.9 72.3 60.6 10.3 57.7 33.5 188 263 G10 1200 1175 87.5 88.7 87.7 80.8 75.2 64.4 13.2 73.1 44.8 188 256 G
151800 1770 89.5 91.1 90.2 83.9 79.2 69.6 18.7 114 44.5 210 270 G1200 1175 88.5 90.2 89.8 81.8 77.5 68.1 19.4 99.9 67 169 234 F
203600 3540 88.5 89.8 89.1 88.6 87 81.5 23.9 150.4 29.7 169 246 G1800 1768 89.5 91.5 91.3 85.6 83 75.8 24.3 135 59.5 194 244 F1200 1170 88.5 90.6 90.7 84.1 81.6 74.8 25.2 126 89.6 161 218 F
253600 3535 89.5 91.1 90.7 87.8 87.3 83.3 29.8 180 37.2 154 225 G1800 1765 88.5 90.7 90.6 83.1 79.2 69.8 32 177 74.5 203 249 G1200 1175 87.5 89.6 89.5 84.4 82 75.1 32 190.3 111.6 167 220 G
303600 3525 88.5 91.2 90.9 88.2 86.8 81.8 36 214.2 44.7 168 231 G1800 1760 90.2 91.8 91.9 85.3 82.7 75.2 37 204 89.5 197 246 F1200 1175 87.5 89.6 90 85.4 83.6 77.6 38 234.3 133.9 178 221 G
403600 3515 90.2 92.2 92.3 89.5 89.2 86 46 288.4 59.7 178 241 G1800 1780 89.5 91.1 90.6 85.7 82.8 75.1 49 267 118.2 163 219 F1200 1175 88.5 91 91.4 84.3 82.3 75.5 50 295.9 179.1 179 219 G
503600 3550 88.5 89.7 88.2 86.7 82.9 76 61 358 74 172 264 G1800 1775 90.2 91.4 91 85 81.4 72.8 61 353 147.7 176 233 G1200 1175 90.2 92.2 92.6 86.8 85.2 79.4 60 371.8 223.7 193 228 G
603600 3545 89.5 90.5 89.7 88.7 88.4 85 71 427 88.9 191 266 G1800 1775 90.2 92.1 92.1 87.1 85.3 79 71 406 177.5 175 223 F1200 1175 89.5 90.9 90.8 86.1 82.9 74.9 73 476.3 268 182 270 H
753600 3540 89.5 90.9 90.5 88.7 88.4 85 89 541.3 111.2 184 252 G1800 1775 91.7 93 93 86.6 84.6 78.3 88 527 222 189 236 G1200 1170 89.5 91.2 91.4 88.3 86.8 81.9 89 587.4 336.2 188 273 G
1003600 3535 91 92.5 92.4 89.3 90 88.2 115 663 148.6 184 252 F1800 1780 93 93.8 93.5 85 82.6 75.7 119 709.9 295.1 182 216 G
125 1800 1780 93 93.9 93.8 85.9 83.7 77.1 147 919 369.1 191 221 G150 1800 1775 92.4 93.5 93.6 88.9 87.9 83.4 171 1015.6 443.3 163 207 F200 1800 1775 94.5 95.4 95.3 88.2 87.2 82.8 225 1219 591.2 150 201 E250 1800 1775 94.5 95.2 95.1 87.9 86.8 82.2 282 1725 739.6 153 204 F300 1800 1780 94.5 95.5 95.5 89.2 88.9 85.6 333 2200 884.7 0.80 175 G350 1800 1780 94.5 95.7 95.8 89.5 89.3 86.2 387 2550 1032.7 80 175 G400 1800 1785 95.4 96.1 96.0 90.3 90.3 87.8 435 2856 1176.6 101 248 G500 1800 1780 95.4 95.9 95.7 88.6 88.4 85.3 554 3625 1474.7 109 235 G600 1800 1770 95 95.9 96.0 89.8 89.5 86.4 659 4733 1780.1 60 175 G
25
Operating Characteristics - Vertical HOLLOSHAFT® MotorsHigh Thrust - “P” Base, Three Phase, Weather Protected Type (WPI), Standard Efficient
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group.The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code.When performance values have been quoted, they should be shown on the order.Data subject to change without prior notice.
www.nidec-motor.comwww.usmotors.com
VERT
ICAL
MOT
ORS
CONV
ERSI
ONCE
NTER
LONG
TERM
STOR
AGE
INFO
RMAT
ION
OPER
ATIN
GCH
ARAC
TERI
STIC
SDI
MEN
SION
PRIN
T IND
EXDR
IVE C
OUPL
ING
PART
NUM
BERS
DIM
ENSI
ONPR
INTS
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
460 VOLTS
TORQUE AT FULL VOLTAGE (FT.ILBS.)
NEMA CODE
FULL LOAD LOCKED PULLOUTTORQUE @ (STARTING) BREAKDOWN
NOLOAD
FULLLOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
LOCKEDSTARTING
FULL LOADSPEED % OF FULL LOAD
7.5 1800 1765 90.2 91.9 91.3 86.5 83.2 76.1 9 61 22.3 230 300 H10 1800 1760 90.2 92.2 91.9 87.2 83.8 77.1 11.9 77 29.8 220 280 G25 1800 1770 92.4 93.5 93.5 84.2 82 75.3 30 175 74.3 234 233 G30 1800 1770 92.4 93.8 93.9 84.5 82.8 76.8 36 201 89.1 225 222 F40 1800 1780 93.6 94.3 93.6 87.9 86.6 81.5 46 277 118 190 244 F50 1800 1780 93.6 94.5 94.1 87.5 86 80.5 57 344 147.6 185 243 F60 1800 1780 94.1 94.7 94.5 87.9 86.6 81.6 68 413 177.3 189 244 F75 1800 1775 94.1 95 94.9 87.9 86.5 81.3 85 526 221.7 194 249 G
100 1800 1780 94.5 95.4 95.2 87.5 86.7 82.6 113 687.5 295.1 176 214 F125 1800 1785 95 95.7 95.5 87.1 86 81.4 141 886.4 368.2 178 221 G150 1800 1785 95.4 95.7 95.1 86.3 83.6 76.4 171 1063 441.7 169 232 G200 1800 1780 95.4 96 95.8 87.7 86.1 80.4 224 1347.2 589.7 167 221 F
26
Operating Characteristics - Vertical HOLLOSHAFT® MotorsHigh Thrust - “P” Base, Three Phase, Weather Protected Type (WPI), Energy Efficient
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group.The code letter is an indication of the locked rotor K.V.A. in accordance with the National Electrical Code.When performance values have been quoted, they should be shown on the order.Data subject to change without notice.
www.nidec-motor.comwww.usmotors.com
VERTICALM
OTORSCONVERSION
CENTERLONG TERM
STORAGEINFORM
ATIONOPERATING
CHARACTERISTICSDIM
ENSIONPRINT INDEX
DRIVE COUPLINGPART NUM
BERSDIM
ENSIONPRINTS
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
460 VOLTS
TORQUE AT FULL VOLTAGE (FT.ILBS.)
NEMA CODE
FULL LOAD LOCKED PULLOUTTORQUE @ (STARTING) BREAKDOWN
NOLOAD
FULLLOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
LOCKEDSTARTING
FULL LOADSPEED % OF FULL LOAD
15 1800 1770 91.7 92 83.4 80.5 72.6 72.6 18.4 108 44.5 227 240 G20 1800 1770 92.4 93.3 85.4 84 78.6 78.6 23.7 136 59.4 222 223 G25 1800 1765 92.4 93.5 84.6 82.7 76.5 76.5 30 173 74.3 230 230 G30 1800 1770 92.4 93.9 84.5 82.8 76.8 76.8 36 201 89.1 224 222 G40 1800 1780 94.1 93.6 87.8 86.4 81.3 81.3 45 286 117.9 192 251 G50 1800 1780 94.5 94.1 87.7 86.2 80.9 80.9 56 358 147.5 192 252 G60 1800 1785 94.5 94.8 87.2 85.9 80.9 80.9 68 434 176.7 200 237 G75 1800 1780 95 95.1 85.3 82.9 75.8 75.8 87 539 221.1 200 247 G
100 1800 1785 95.4 95.1 86.3 84.5 78.4 78.4 114 737.5 294.3 185 230 G125 1800 1785 95.4 95.3 86.4 85.2 79.7 79.7 142 924.1 368.1 186 230 G150 1800 1785 95.8 95.6 86.3 83.9 77.1 77.1 169 1072.2 441.5 174 235 G200 1800 1785 95.8 95.8 85.4 82.4 74.6 74.6 228 1484.2 588.9 186 244 G250 1800 1780 95.8 95.6 83.9 80.4 71.8 71.8 292 1794.3 737.1 183 235 G300 1800 1785 95.8 96 88.6 88.1 84.4 84.4 331 2200 883.1 80 175 G350 1800 1785 95.8 96.5 87.9 87.2 83.2 83.2 389 2550 1031.2 80 175 G400 1800 1785 95.8 96.6 96.6 90.2 90.2 87.6 433 2859 1176.6 101 250 G450 1800 1785 96.2 96.6 96.3 89.1 88.5 85 491 3250 1323.3 80 250 G
27
Operating Characteristics - Vertical HOLLOSHAFT® MotorsHigh Thrust - “P” Base, Three Phase, Weather Protected Type (WPI),Premium Efficient & Premium Efficient/Inverter Duty
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group.The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code.When performance values have been quoted, they should be shown on the order.Data subject to change without prior notice.
www.nidec-motor.comwww.usmotors.com
VERT
ICAL
MOT
ORS
CONV
ERSI
ONCE
NTER
LONG
TERM
STOR
AGE
INFO
RMAT
ION
OPER
ATIN
GCH
ARAC
TERI
STIC
SDI
MEN
SION
PRIN
T IND
EXDR
IVE C
OUPL
ING
PART
NUM
BERS
DIM
ENSI
ONPR
INTS
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
460 VOLTS
TORQUE AT FULL VOLTAGE (FT.ILBS.)
NEMA CODE
FULL LOAD LOCKED PULLOUTTORQUE @ (STARTING) BREAKDOWN
NOLOAD
FULLLOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
LOCKEDSTARTING
FULL LOADSPEED % OF FULL LOAD
53600 3500 80 78.2 73.4 84.3 81.6 75.2 6.9 39.1 7.5 162 267 G1800 1745 82.5 84.4 82.5 82.7 77.6 67.9 6.9 45.9 15 240 300 J
7.53600 3490 81.5 81.7 78.4 84.1 81 73.4 10.2 63.4 11.3 147 242 H1800 1735 84 86.7 85.8 84.7 80.9 72.6 9.9 62 22.7 254 299 H
103600 3485 82.5 84.3 81.9 87.3 83.6 76.9 13 80.8 15.1 157 253 H1800 1740 85.5 88 87.3 84.2 79.5 71 13 80.8 30.2 230 270 H
153600 3470 86.5 87.8 86.4 88 87.1 83.1 18.5 108.2 22.7 168 253 G1800 1765 88.5 89.1 87.8 83.7 79.6 70.4 19 113 44.6 210 270 G
20 1800 1760 87.5 89.9 89.4 85.6 83.2 76.2 24.7 135 59.7 193 242 F25 1800 1760 89.5 90.7 90.2 85.9 83.5 76.6 30 179 74.6 210 250 G30 1800 1755 88.5 90.8 90.7 86.2 83.9 77.2 37 212 89.7 200 250 G40 1800 1765 90.2 91.4 90.7 87.4 85.7 80 48 264 118.9 179 229 F50 1800 1765 91 92.3 91.8 88.1 86.9 82.2 58 335 148.6 188 232 F60 1800 1775 91.7 92.3 91.4 86.6 85.4 80.3 71 392.7 177.4 163 200 F75 1800 1775 92.4 93 92.3 86.8 85.7 81 88 505.9 221.7 170 205 F
100 1800 1780 93 93.1 91.6 85.5 82.5 75.1 118 746.8 294.7 171 242 G125 1800 1780 92.4 92.3 90.8 88.4 86.8 81.6 143 975.7 369 164 264 G
28
Operating Characteristics - Vertical HOLLOSHAFT® MotorsHigh Thrust - “P” Base, Three Phase, Totally Enclosed Fan Cooled (TEFC) Standard Efficient
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group.The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code.When performance values have been quoted, they should be shown on the order.Data subject to change without prior notice.
www.nidec-motor.comwww.usmotors.com
VERTICALM
OTORSCONVERSION
CENTERLONG TERM
STORAGEINFORM
ATIONOPERATING
CHARACTERISTICSDIM
ENSIONPRINT INDEX
DRIVE COUPLINGPART NUM
BERSDIM
ENSIONPRINTS
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
460 VOLTS
TORQUE AT FULL VOLTAGE (FT.ILBS.)
NEMA CODE
FULL LOAD LOCKED PULLOUTTORQUE @ (STARTING) BREAKDOWN
NOLOAD
FULLLOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
3/4LOAD
1/2LOAD
FULLLOAD
LOCKEDSTARTING
FULL LOADSPEED % OF FULL LOAD
20 1800 1770 90.2 91.3 90.5 82.9 78 67.7 26.2 175 59.3 230 300 H25 1800 1770 89.5 90.1 89.2 79.5 72.8 60.3 34 221 74.3 233 301 H30 1800 1765 91 91.8 91.3 82.4 77.6 67.1 39 254 89.2 230 290 H40 1800 1770 91 92 91.2 84.5 81.2 73 51 294 118.6 180 237 G50 1800 1775 91 92.3 91.6 84 78.7 69.1 64 400 148.1 210 266 G60 1800 1770 91.7 92.9 92.5 85.5 82.8 75.3 75 466 177.8 200 256 G75 1800 1770 91 92.9 92.7 84.9 81.4 73.1 95 607 222.4 210 266 G
100 1800 1780 93 93.7 93 81.8 77.6 68 129 831.3 295 205 244 H125 1800 1780 93.6 93.9 93.2 80.9 76.1 65.9 162 1143.4 368.5 228 267 H150 1800 1780 92.4 93.4 93.2 87.3 84.6 77.4 182 1241.2 442.6 198 239 G200 1800 1780 93 93.9 93.8 85.1 81.2 71.9 247 1807.7 589.7 157 281 H250 1800 1780 95 95.7 95.7 87.7 85.3 78.8 294 2057.9 738.2 150 271 G300 1800 1780 95 95.9 95.8 90.3 89.8 86.9 341 2203 885.9 90 200 G
29
Operating Characteristics - Vertical HOLLOSHAFT® MotorsHigh Thrust - “P” Base, Three Phase, Weather Protected Type (WPI), International Duty
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group.The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code.When performance values have been quoted, they should be shown on the order.Data subject to change without prior notice.
www.nidec-motor.comwww.usmotors.com
VERT
ICAL
MOT
ORS
CONV
ERSI
ONCE
NTER
LONG
TERM
STOR
AGE
INFO
RMAT
ION
OPER
ATIN
GCH
ARAC
TERI
STIC
SDI
MEN
SION
PRIN
T IND
EXDR
IVE C
OUPL
ING
PART
NUM
BERS
DIM
ENSI
ONPR
INTS
30
Operating Characteristics - Vertical Solid Shaft Normal Thrust - “P” Base, Three Phase, WPI & TEFC, Energy Efficient
Energy Efficient
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
480 VOLTS
CURRENT (AMPS)
NEMA CODE
FULL LOADTORQUE @
LOCKED(STARTING)
PULLOUTBREAKDOWN
NO LOAD
FULL LOAD
FULL LOAD
3/4LOAD
1/2LOAD
FULL LOAD
3/4LOAD
1/2LOAD
FULL LOAD
LOCKED STARTING
FULL LOAD SPEED % OF FULL LOAD
11800 1745 82.5 81.9 78.4 76.1 67.5 54.3 1.5 11.3 3 324 418 L
1200 1150 80 82.5 80.4 72 63.4 50.2 1.6 9.3 4.6 250 335 J
1.5
3600 3495 82.5 82 78.8 87.6 83 73.6 1.9 16.7 2.3 277 378 K
1800 1745 84 84.6 82.2 81.3 74.4 62.2 2.1 17.5 4.5 343 437 L
1200 1180 85.5 86 83.3 64.9 56.1 43.5 2.5 16.5 6.7 221 354 K
2
3600 3490 84 84.2 81.9 90.2 86.8 79 2.5 21.9 3 280 377 K
1800 1735 84 84.6 82.2 78.7 70.4 57 2.8 23.3 6 359 445 L
1200 1180 86.5 87.3 84.7 68.3 59.7 46.7 3.1 21.9 8.9 233 371 K
3 1800 1755 87.5 87.5 85.5 78.7 71.6 59.1 4.1 31 9 284 392 K
5 1800 1740 87.5 89.1 88.8 84.3 79.6 69.6 6.3 42 15.1 235 322 H
7.5 1800 1750 89.5 90.3 89.4 84.6 81.2 73.4 9.3 57 22.5 228 285 G
30 1800 1765 92.4 93.3 93.1 85.1 83.3 77.2 36 210 89.2 230 228 G
Premium Efficient
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
480 VOLTS
CURRENT (AMPS)
NEMA CODE
FULL LOADTORQUE @
LOCKED(STARTING)
PULLOUTBREAKDOWN
NO LOAD
FULL LOAD
FULL LOAD
3/4LOAD
1/2LOAD
FULL LOAD
3/4LOAD
1/2LOAD
FULL LOAD
LOCKED STARTING
FULL LOAD SPEED % OF FULL LOAD
11800 1755 85.5 84.4 80.9 76.8 68.8 56.2 1.4 13.5 3 412 523 M
1200 1165 82.5 82.5 76.6 62.7 52.9 40.4 1.8 13 4.5 363 478 M
1.5
3600 3510 84 84 79.9 89.3 85.6 77.7 1.9 18.8 2.2 326 437 M
1800 1755 86.5 86.5 83.8 81.2 74.2 62.1 2 19.9 4.5 387 509 M
1200 1175 87.5 87.5 85.6 71 63.4 50.7 2.3 14.2 6.7 188 317 J
2
3600 3505 85.5 85.5 82.6 90.4 87.1 79.8 2.4 25.2 3 341 446 M
1800 1750 86.5 86.5 84.9 81.9 75.1 62.8 2.6 25.2 6 379 488 M
1200 1175 88.5 88.5 86.4 71.5 63.9 51.1 3 20 8.9 211 340 J
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group. The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code. When performance values have been quoted, they should be shown on the order. Data subject to change without prior notice.
www.nidec-motor.comwww.usmotors.com
VERTICALM
OTORSCONVERSION
CENTERLONG TERM
STORAGEINFORM
ATIONOPERATING
CHARACTERISTICSDIM
ENSIONPRINT INDEX
DRIVE COUPLINGPART NUM
BERSDIM
ENSIONPRINTS
Operating Characteristics - Vertical Solid Shaft Normal Thrust - “P” Base, Three Phase, WPI & TEFC, Premium Efficient
31
HPRPM % EFFICIENCY % POWER FACTOR CURRENT (AMPS)
480 VOLTS
CURRENT (AMPS)
NEMA CODE
FULL LOADTORQUE @
LOCKED(STARTING)
PULLOUTBREAKDOWN
NO LOAD
FULL LOAD
FULL LOAD
3/4LOAD
1/2LOAD
FULL LOAD
3/4LOAD
1/2LOAD
FULL LOAD
LOCKED STARTING
FULL LOAD SPEED % OF FULL LOAD
3 1800 1755 86.5 87.7 85.6 78.6 71.5 59 4.1 31 9 284 392 K
5 1800 1740 87.5 89.3 88.9 84.6 80 70.3 6.3 41 15.1 231 317 H
7.5 1800 1750 88.5 90.4 89.5 84.7 81.2 73.4 9.3 57 22.5 228 285 G
10 1800 1750 89.5 90.9 90.7 85.7 83 76.3 12.2 70 30 211 262 G
15 1800 1775 91 92.1 91.3 83.3 80.2 72.2 18.4 107 44.4 227 236 G
20 1800 1770 91 92.4 91.9 82.5 79.4 71.2 25 141 59.4 223 227 G
25 1800 1770 91.7 93.4 93.2 82.4 79.1 70.7 31 174 74.2 231 234 G
30 1800 1770 92.4 94.3 94.4 85 83.2 76.9 36 210 89 230 228 G
40 1800 1780 93 93.7 93.3 84 80.2 71 48 289 118.1 181 251 G
50 1800 1775 93 94.3 94.2 85.8 83.3 76 59 351.4 147.8 172 234 G
100 1800 1780 95 95.7 95.8 87.6 86.8 82.7 113 684.4 294.9 174 213 F
125 1800 1780 94.5 95.9 96 87.4 87.2 83.8 141 878.6 369.3 165 200 G
Efficiency and power factor values listed above are typical values. For guaranteed and certified values, refer to the Technical Service Group. The code letter is an indication of the locked rotor K.V.A in accordance with the National Electrical Code. When performance values have been quoted, they should be shown on the order. Data subject to change without prior notice.
