Oil & Gas FEI Product Portfolio

8/10/2019 Oil & Gas FEI Product Portfolio

1/12

Oil & Gas Product Portfolio

Patricio Jaime

[email protected]


2/12

cm

mm

m

nm

Slice & view

Drill core Drill cuttings

3D

Meso

Micro

Nano

Section & view

Surface viewHuman Eye

Optical microscopy

Scanning Electron Microscopy

Automated SEM-EDS

Focused Ion Beam

SEM

DualBeam

FEIs Multi-Scale Analysis Solutions


3/12

FEI covers Centimeter-scale down to Nano-scale

1 cm 1 mm 100 um 10 um 1 um 100 nm 10 nm

Optical Microscopy

SEM and FIB Combination

Scanning Electron Microscopy

Micro-CT

Naked Human Eye


4/12

FEIs Core-To-Pore Workflow

4 04-Sep-14

QEMSCAN

Helios NanoLab

MAPSMultiscale imaging

2-D Quantitative petrography

3-D volume reconstruction

cm nm

2-D 3-D

Core Pore

HeliscanMicroCT


5/12

Scanning electron microscopy (SEM)imaging at multiple scales using MAPS

(Modular Automated Processing System)

to allow characterisation of sub-micron

scale features

SEM imaging


6/12


7/12

Old Cores Sidewall Cores

Damaged cores Drill cuttingsUnconsolidated sands

Carbonate Clastic

3D micro-CT imaging

at multiple scales

High resolution 3D

micro-CT imaging of

core material

3D image data with

grey-scale controlled

by X-ray density


8/12

Higher geometric and signal fidelity

> 10 times faster than conventional CT

Larger length scales at highest resolution

Under the same

conditions aconventional micro-CT

could only scan this

much material at same

resolution.

40 Gbyte scan of carbonate core (5mm diameter, 20mm long, 3.5 micron resolution)

Heliscan

3D micro-CT imaging

at multiple scales


9/12

Image registration2D-3D: a high resolution 2D SEM image is registered on a 3D micro-CT scan

to map fine features and improve the quality of 3D.

2D-3D: a QEMSCAN mineral map is registered on a 3D micro-CT scan toallow 3D mineral identification

3D-3D: enables accurate combination of 3D images for derivation of

difference maps and mapping of micro-porosity, multiple fluid phases,

dynamic effects etc. (dry and wet imaging)

2D SEM picture registered on 3D plug scan Animation of 2D to 3D registration and computation

of pore space and pore network


10/12

Image processing

Avizo Fire: Data import of images from:

whole core CT, micro-CT, PET, MRI, Dual-Beam (FIBSEM), SEM, and optical

microscopy;

Image segmentation;

3D data exploration and manipulation;

Easy generation of 3D movies;

Statistical and geometrical analysis of 3D features;

Matlab bridge;

3D registration for multiple imaging;

Avizo XLab:

Direct 3D image-based simulation of:

absolute permeability, molecular diffusivity, electrical resistivity, and

thermal conductivity computation


11/12

Automated sequential sample Focused Ion Beam (FIB) millingand SEM (Scanning Electron Microscope) imaging creates a

series of high resolution 2D images;

After 3D volume reconstructions, Avizo Fire software can be

used to visualize and quantify textures such pore networks atthe micron to nano-scale.

DualBeam FIBSEM imaging


12/12

Thank You!

http://www.fei.com/natural-resources/oil-gas/

Oil & Gas FEI Product Portfolio

Documents

Transcript of Oil & Gas FEI Product Portfolio