Offshore Collaborative Engineering ServicesOffshore Collaborative Engineering Services ADA Ramps for...
Transcript of Offshore Collaborative Engineering ServicesOffshore Collaborative Engineering Services ADA Ramps for...
KORUS has been providing offshore collaborative engineering services seamlessly to
its clients based out in the USA for a number of clients for more than two years. These
services included assistance in design and preparation of drawings for ADA Ramps
conforming to the PENNDOT Design and Drawing Standards. The work on these ramps
also included preparation of Layout Plans of existing intersections based on GPS
survey data received in digital form. We have already delivered construction drawings
of more than 200 Ramps covering over 50 intersections. In addition to ADA Ramps we
also prepared pre construction survey drawings of West Trenton Track Project, Septa
Line No.3 covering a stretch of 5km.
KORUS is currently providing services for a Bridge Project in USA for the preparation of
rebar shop drawings of 180 bridges having pre-stressed box beams superstructure
and cast in place Cantilever and Integral Abutments supported on piles. Some of the
project sites also included precast box culverts for which these services are being
provided.
The coverage of KORUS consultancy also extends across various regions such as
South and Southeast Asia, West Asia, Central Asia, Africa including countries like
Bangladesh, Pakistan, Bahrain, Saudi Arabia, Yemen, Ghana, Angola, Nigeria,
Mozambique, Kenya, Tanzania, Indonesia, Georgia (erstwhile part of USSR) and Brazil.
KORUS is also registered with multilateral funding agency Asian Development Bank
With the growing need of diverse nature of projects and client requirements, KORUS
has been continuously enhancing its Computer Software and Hardware capabilities to
keep pace with the developments. The company has been extensively using
STAAD.PRO, 3D Civil, AUTOCAD, Tekla, Inventor and aSa for projects undertaken by us.
Due to our working on numerous overseas projects some of our technical staff is well
versed in the use of ANSI-360 and ACI-318.
Initially one of the major challenges in offshore engineering services on above projects
has been of ensuring efficient and effective co-ordination with the clients overcoming
the geographical time difference between India and the USA for delivering the project
outputs according to the schedule. KORUS is successfully managing this challenge by
aligning the office working hours with those of the USA and also through the extensive
use of Audio-Video conferences with the clients.
As part of collaborative services KORUS can also depute its staff to client place for
short durations if required to assist in the preparation of project outputs in case of any
urgency and augmentation of its project team or even for acquiring knowledge on
local standards to be followed on the assigned component of the work.
Offshore Collaborative Engineering Services
Offshore Collaborative Engineering Services
Span : 16.15mt. between bearing Superstructure : Simply Supported Precast Prestressed Box Beams With Cast-in-place Deck Slab Substructure : RC Integral Abutments Foundations : Steel H-Beam Type Piles Client : PAP3- Rapid Bridge Replacement Project Pennsylvania, USA
Span : 12.95mt. between bearing Superstructure: Simply Supported Precast Prestressed Spread Box With Cast-in-place Deck Slab Substructure : RC Integral Abutments Foundations : Steel H-Beam Type Piles Client : PAP3- Rapid Bridge Replacement Project, Pennsylvania, USA
Span : 21.65mt. between bearing
Superstructure : Simply Supported Precast Prestressed
Box Beams With Cast-in-place Deck Slab
Substructure : RC Integral Abutments
Foundations : Steel H-Beam Type Piles
Client : PAP3- Rapid Bridge Replacement
Project, Pennsylvania, USA
Span : 14.32mt. between bearing Superstructure : Simply Supported Precast Prestressed Box Beams With Cast-in-place Deck Slab Substructure : RC Integral Abutments Foundations : Steel H-Beam Type Piles Client : PAP3- Rapid Bridge Replacement Project, Pennsylvania, USA
Offshore Collaborative Engineering Services
ADA Ramps for Disabled Persons Location : S. State St. & Colburn Avenue (SR-0006), Clark Summit Borough, Lackawanna County, Pennsylvania (USA)
ADA Ramps for Disabled Persons Location : MacDade Bouleverd & Sharon Avenue (SR-2006), Colingdate Borough, Pennsylvania (USA)
ADA Ramps for Disabled Persons Location : MacDade Boulevard & Rhodes Avenue (SR-2006), Collingdale Borough, Delaware County, Pennsylvania (USA)
ADA Ramps for Disabled Persons Location : MacDade Boulevard & Oak Lane (SR-2015), Collingdale Borough, Delaware County, Pennsylvania (USA)
KORUS Engineering Solutions Pvt. Ltd.
100mt. High Concrete ChimneyFor Beneficiation Plantat Bhilwara, Rajasthan, IndiaClient : Jindal Saw Limited
90mt. High Concrete ChimneyFor 4.5 MTPA Pellet Plantat Barbil, Odisha, IndiaClient : Jindal Steel & Power Limited
Deep Excavation Abutting Existing Structureusing Contiguous Piles and Soil AnchorsFor Plate Mill at Raigarh, Chattisgarh, IndiaClient : Jindal Steel & Power Limited
Tunnel for UtilitiesFor 1.4 MTPA Bar Millat Angul, Odisha, IndiaClient : Jindal Steel & Power Limited
TALL & SPECIAL STRUCTURES
KORUS Engineering Solutions Pvt. Ltd.
Inside View of Bar MilFor 1.2 MTPA Bar Milat Torangallu, Karnataka, IndiaClient : Jindal South West (JSW) l
Ariel View of Shed BuildingFor Medium and Light Section Millat Raigarh, Chattisgarh, IndiaClient : Jindal Steel & Power Limited
Client : Jindal Steel & Power Limited
For 1.2 MTPA Bar Mill
Operational View of Bar Mill
at Patratu, Jharkhand, India
Client : Jindal Steel & Power Limited
For Cut to Length Project
External View of Shed
at Raigarh, Chattisgarh, India
INDUSTRIAL STRUCTURES
KORUS Engineering Solutions Pvt. Ltd.
Client : Larsan & Toubro
For Steel Melting Shop
Raw Water Reservior
at Hazira, Gujrat, India
Client : Kamineni Steel & Power Limited
For Steel Melting Shop
3 500m Overhead Water Tank at 40mt.
at Andhra Pradesh, India
Client : D.W. & S. Department, Govt. of Jharkhand
For Block - Bengabad, Jharkhand, India
Motileda Rural Water Supply System,
Client : D.W. & S. Department, Govt. of Jharkhand
For Block - Jamua, Jharkhand, India
Kurhobindo Rural Water Supply System,
WATER SUPPLY & TREATMENT SYSTEMS
KORUS Engineering Solutions Pvt. Ltd.
WATER SUPPLY & TREATMENT SYSTEMS
Client : Amreli Steels (Pvt.) Limited
For Steel Melt Shop
Water Treatment Plant
at Karachi, Pakistan
Cooling Towers
Client : Amreli Steels (Pvt) Limited
For Steel Melt Shop
at Karachi, Pakistan
60mt. Diameter of ThickenerFor Beneficiation Plantat Bhilwara, Rajasthan, IndiaClient : Jindal Saw Limited
Pressure FiltersFor 1.2 MTPA Bar Mill at Torangallu, Karnataka, IndiaClient : Jindal South West (JSW)
KORUS Engineering Solutions Pvt. Ltd.
The picture shows facilities for loco maintenance shop which has been designed by KORUS in Mozambique for JSPL Mozambique, LDA. In the shop the wheel axles of the Model no. RL30SCS loco have been stripped before raising it by jacks for routine servicing and maintenance purpose.
at Raigarh, Chattisgarh, India
Steel Girder Bridge for the Torpedo LadleFor Steel Melting Shop -II,
Client : Jindal Steel & Power Limited
at Mozambique, South Africa
Loco Maintenance & Repair Facilities
Client : Jindal Mozambique Minerals Lda
Single span simply supported built up steel girder rail bridge with approaches was designed over the existing storm water main drain for transportation of 320T. of hot metal load carried by Torpedo Ladle on multiple axles from the Blast Furnace to the Steel Melt Shop of Jindal Steel and Power Limited at Raigarh, Chattisgarh.
TRANSPORT INFRASTRUCTURE
RC Curved Bridge Connecting Existing Road & Mill Floorof Bar Mill at (+) 5.0mt. LevelFor 1.2 MTPA Bar Millat Torangallu, Karnataka, IndiaClient : Jindal South West (JSW)
RC Cross-Over Bridge Connecting Existing Road &Mill Floor of Wire Rod Mill at (+)5.0mt. LevelFor 0.6 MTPA Wire Rod Millat Torangallu, Karnataka, IndiaClient : Jindal South West (JSW)
The reinforced concrete bridge connecting Bar MilI floor with the existing road is a two lane seven spans continuous curved bridge. The T- beam bridge connecting Wire Rod Mill with the existing road.