Office

LordoReal elasticity

ww

w.da

uphi

n-gr

oup.

com

2

LordoAn absolute top design with an innovative approach for suppor-ting the back using a transparent, pressure-regulating fabric which is elastic over its entire area and a simple, self-aligning lumbar support.

This is Lordo.

Des

ign:

Mart

in B

alle

ndat

3

MS LO 33575+ Armrests 103

4

Lordo

MS MS

Lordo is an attractive chair whichever way you look at it. Its elastic, pressure-regulating backrest maintains its transpa-rent and airy look at all times. What is so ingenious about Lordo is the clarity of its lines. It has an imposing appea-rance and yet is elastic and soft as soon as you sit back

in it. This is all thanks to its lightfast and flexible woven fa-bric. The fabric is made of polyester and has Lycra threads specially woven into it, available in black or light grey. Lordo is also available with comfortable upholstery cushion. The cushion is available in black or coloured leather.

Swivel chairTransparent and comfortable

LO 33575+ Armrests 072

LO 33575 + upholstery cushion in leather

5

6

MS

The woven backrest fabric consists of polyester and light-fast elastic Lycra threads and was specially developed for the Lordo chair. Thanks to this fabric, the backrest with its alternating black and transparent lines yields flexibly and adjusts to the user’s body form whilst regulating pressure. The effect produced is similar to what would happen if a number of rubber bands were pulled tight one above the

other and then connected together. With its high backrest, the Lordo executive chair offers a particularly high level of comfort. The neckrest area has the same elastic cushio-ning properties as the main backrest. This allows the back of your head to sink into it comfortably whilst remaining perfectly supported.

Swivel chair with neckrestImposing and modern

LO 33575+ Neckrest + Armrests 072

Lordo7

Thanks to its area-elastic support material, with its uphol-stered pads Lordo offers optimum seated comfort in all work postures. Lordo features the Motionflex-Synchron mechanism with a rapid adjustment of the backrest coun-terpressure, a seat-depth adjustment of 6 cm and a seat-tilt adjustment up to -5° as standard.

Swivel chair with comfortable upholstery pads

Lordo8

9

LordoFloating comfort

10

The Lordo cantilever and conference chair have also been created to match the Lordo swivel chairs. The backrests which were deliberately designed in accordance with the form-follows-function principle are harmoniously combined with a cylindrical armrest profile on a classic round tubular frame. The light and airy backrest appears to be floating, as the seat and backrest of the chair are not directly con-nected to each other. The elastic, transparent fabric em-

phasises this pleasant effect (alternatively available with upholstery cushion). The Lordo cantilever chair is available with an attractive, stackable frame. A smooth underseat shell protects the upholstery when a number of chairs are stacked one on top of the other. The conference swivel chair is height-adjustable and available with transparent „stripe design“ mesh or with upholstery cushion, with gli-des or on castors.

LO 33560 001stackable

LO 33560 001+ upholstery cushion in leather

LO 33500 001 LO 33500 001 + upholstery cushion in leather

11

LO 33575 + Armrests 072

MS

Options

Lordo12

The depth of the seat can also be adjusted while sitting, using a flat button located on the underside of the seat. The user can make the most of the large adjustment range (6 cm) because the seat is able to slide beneath the tensi-oned backrest cover. This makes it possible to reduce the seat area and select either a very large or very small seat depth. Users can therefore adjust the chair to suit their individual body size and preferred posture when sitting.

The armrests are height- and width-adjustable. The armrest pads are pleasently soft to the touch.

The swing-mounted lordosis segment on the backrest fea-tures a separate tensioned cover. By tilting with respect to the backrest frame, it complements the elasticity of the fabric itself. As a result, this area adjusts optimally to the movements of the person sitting and has a mobilising ef-fect on the lumbar spine. The segment ideally supports and harmonises with the elastic, pressure-regulating effect of the entire backrest.

The backrest has a 10 cm height-adjustment range. The telescopic shanks on both sides of the backrest frame can easily be grasped from the seated position and are adjusted using attractive chrome buttons. The adjustment buttons on the backrest match those on the armrests per-fectly from a design point of view.

The woven backrest fabric consists of polyester and light-fast elastic Lycra threads and was specially developed for the Lordo chair. Thanks to this fabric, the backrest with its alternating black (optionally light grey) and transparent lines yields flexibly and adjusts to the user’s body form whilst re-gulating pressure. The effect produced is similar to what would happen if a number of rubber bands were pulled tight one above the other and then connected together.

The armrests 103 are made of polished die-cast aluminium and feature soft-touch armpads.

13

MS LO 33575+ Armrests 072+ Neckrest

Tensioned elastic neckrest.

Air-comfort backrest offering support for the back thanks to a tensioned elastic fabric which is breathable and regulates pressure.

Tilting, self-aligning lumbar support, moves backwards and forwards in response to axial body movements.

Backrest height-adjustment feature (10 cm), can be operated in a sitting position using the buttons on either side.

Side-mounted spring-force ad-justment: rapid adjustment of the counterpressure with just a few turns while sitting

Polished aluminium base (optional) with large, easy-run double castors (standard: plastic base).

Armrests: height- (7 cm) and width-adjustable (each side 2.5 cm) with soft PU armpads

Motionflex-Synchron mechanism: can be locked in 4 positions, seat-tilt adjustment up to –5° as standard

Seat-depth adjustment: 6 cm by using a sliding seat which can be locked in 6 positions

Infinite seat-height adjustment (40-51 cm) with safety gas unit

Technical features

Lordo14

2.5 cm

7 cm

Armrests 072 (2F, PU)

Armrests 103 (fixed)

Base black plastic, with big castors (Ø 65 mm); standard

Base polished aluminium, with big castors (Ø 65 mm); option

Upholstered cushion covered with leather (black/coloured) 66336 Lordosis segment66335 Middle backrest segment66337 Neckrest segment

Upholstered cushion covered with leather (black/coloured) 66338 Backrest segment

Bases Leather cushion

Web K 4310 Black Transparent “stripe design” mesh

MeshArmrests

Web K 4312 Light grey Transparent “stripe design” mesh

52

57

– 6

7

4669

40

– 5

16

0 –

78

97

– 1

18

45 – 51

69

58

45

88

45

45

43 6

7

43

61

70

46

87

– 9

5

46

41

– 4

96

6 –

74

40

70

47

52

57

– 6

7

4669

40

– 5

1

97

– 1

18

69

45 – 51 52

79

– 8

9

4670

40

– 5

16

0 –

78

11

9 –

14

0

45 – 51

70

MSMS MSLO 33575 072LO 33575

LO 33500 001

LO 33575 072+ Neckrest

LO 33560 001 stackable

52

57 –

67

4670

97 –

118

40 –

51

65 –

76

45 – 51

70

MS LO 33575 103

15

Lordo

Dauphin HumanDesign®Group

Distribution:

Dauphin HumanDesign® Group GmbH & Co. KG

Manufacturer:

Bürositzmöbelfabrik Friedrich-W. Dauphin GmbH & Co. or approved partner

info@dauphin.de+49 (0) 91 58 - 17- 0

Tel.

+49 (0) 91 58 - 17- 7 00

E-Mail

info@dauphin-group.comEspanstraße 36 D 91238 Offenhausen

Espanstraße 29 D 91238 Offenhausen

Dauphin HumanDesign® Center international:

Dauphin HumanDesign® Australia Pty. Ltd. +61 410 47 56 12 dirk.woywod@dauphin.com.au 2 Maas Street CROMER NSW 2099 / Australia

www.dauphin-group.com

Your stockist

10 1

87 0

1 0

4/1

3 3

4

D

iffer

ence

s in

col

our,

erro

rs a

nd m

odifi

catio

ns e

xcep

ted.