OAKMONT ALL WEATHER WICKER SOFA & OTTOMANWARNING: Sofa is for sitting / lying purpose only. It is...
5
WARNING: Proper use of the ottoman is for single person to rest legs on while sitting in chair. The ottoman is not to be used for seating or standing purposes and will not function as a stool or step-ladder. Ottoman will support up to weight of 250 lb (113.4 kg). Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use. OAKMONT ALL WEATHER WICKER SOFA & OTTOMAN ASSEMBLY INSTRUCTION DO NOT RETURN THIS PRODUCT TO THE STORE. FOR MISSING PARTS OR QUESTIONS TO THIS PRODUCT PLEASE CALL US AT 1-888-733-8169 OR EMAIL US AT [email protected] OR [email protected] OR [email protected] WARNING: Sofa is for sitting / lying purpose only. It is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only. Sofa tested for use at weight of 600 lb (272.7 kg). Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use. IMPORTANT: Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, please install all the screws on the product and tighten all the screws after adjusting the product which can stand on the floor even. RESIN WICKER PRODUCT CARE Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time nuts and bolts can loosen. Occasinally, check nuts and bolts on all chairs and tables, re-tighten if necessary. · Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure! · The sofa and coffee table are not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only. · The sofa use at weight of 600lb (272.7kg). Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use. CARE & MAINTENANCE STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAY. SPILLS: Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushion to air dry. FABRIC CARE: Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean. WARNING: · Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product construction. · Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires. · Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
Transcript of OAKMONT ALL WEATHER WICKER SOFA & OTTOMANWARNING: Sofa is for sitting / lying purpose only. It is...
WARNING: Proper use of the ottoman is for single person to rest legs onwhile sitting in chair. The ottoman is not to be used for seating or standing purposesand will not function as a stool or step-ladder. Ottoman will support up to weight of 250lb (113.4 kg). Improper use of this product or failure to use as directed may result ininjury. Not intended for commercial use.
OAKMONT ALL WEATHER WICKER SOFA & OTTOMANASSEMBLY INSTRUCTION
DO NOT RETURN THIS PRODUCT TO THE STORE. FOR MISSING PARTS OR QUESTIONS TO THIS PRODUCTPLEASE CALL US AT 1-888-733-8169 OR EMAIL US AT [email protected] OR
[email protected] OR [email protected]
WARNING: Sofa is for sitting / lying purpose only. It is not to be used forstanding purposes and will not function as a stool or step-ladder. Use on even surfacesonly. Sofa tested for use at weight of 600 lb (272.7 kg). Improper use of this product orfailure to use as directed may result in injury. Not intended for commercial use.
IMPORTANT:
Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, pleaseinstall all the screws on the product and tighten all the screws after adjusting the product which can stand on the floor even.
RESIN WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, washwith a mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.Over time nuts and bolts can loosen. Occasinally, check nuts and bolts on all chairs and tables, re-tighten if necessary.
· Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
· The sofa and coffee table are not to be used for standing purposes and will not function as a stool or step-ladder. Use oneven surfaces only.
· The sofa use at weight of 600lb (272.7kg). Improper use of this product or failure to use as directed may result in injury.Not intended for commercial use.
CARE & MAINTENANCE
STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAY.
SPILLS: Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allowcushion to air dry.
FABRIC CARE: Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.
WARNING:
· Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area ofthe product construction.
· Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry lineor electrical wires.
· Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always befollowed to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
No. Part Qty Image No. Part Qty Image
A1 Left Arm 1 A2 Right Arm 1
B chair back 1 C Seat Panel 1
D Washer 12 E 4
F Bolt 4 G Allen Wrench 1
OAKMONT ALL WEATHER WICKER SOFA Parts List:
H Seat Cushion 3 I Back Cushion 3
Step 1: Secure sofa back (B) to left arm (A1) with2 washer (D) and 2 long bolts (E) by using allenwrench (G) Do not fully tighen now
Step 2: Secure right arm (A2) to assembled sofaback (B) with 2 washer (D) and 2 long bolts (E) bysing allen rench (G) Do not f ll tighen no
G
EDA1
DE
D
E
BE D
G
A2
wrench (G). Do not fully tighen now. using allen wrench (G). Do not fully tighen now.
J 4
(φ6x35mm)
Short Bolt
(φ6x15mm)
(φ6x25mm) Long Bolt
Step 4: Secure seat panel (C) to assembled sofaback (B) with 4 washer (D) and 4 bolts (F) byusing allen wrench (G). Verify the alignment andadjust, then tighten all the screws.
Step 3: Secure seat panel (C) to assembled sofaarms (A1.A2) with 4 washer (D) and 4 shortbolts (J)by using allen wrech (G). Do not fully tighen now.
C
G D
DJ
DE
DE
C
D F
DF
DF
GDF
GDF G
DF
GDF
B
C
Step 5 & 6: Put seat cushion (H) and back cushion (I) on the sofa. The sofa is assembled.
C
G DJ
DE
DE
IH
C
D F
DF
DF
GDF
GDF G
DF
GDF
B
C
0.00.20.40.60.81.0
Parts List:
No. Part Qty Image No. Part Qty Image
A Ottoman Leg 2 B Side Panel 2
C Top 1 D Cushion 1
E Washer 12 F Screw(φ6x30mm) 12
G Allen Wrench 1
OAKMONT ALL WEATHER WICKER OTTOMAN
Step 1:Attached right and left Leg (A) to top (C) by using four screws (E) and four washers (D) withallen wrench (G). DO NOT TIGHTEN ALL BOLTS NOW.
Step 2:Attached side panel (B) to right and left legs (A) by using four screws (E) and four washers(D) with allen wrench (G). DO NOT TIGHTEN ALL BOLTS NOW.
D
Step 3: Place the ottoman upside down and fully tighten all bolts after making sure it is stable. Thenput cushion on it. Finished!
D
