Numerical Offshore Tank - Description
-
Upload
rodolfo-goncalves -
Category
Documents
-
view
508 -
download
2
description
Transcript of Numerical Offshore Tank - Description
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 1 de 1
TPN - Tanque de Provas Numérico: Uma Infra-Estrutura Inovadora
para Os Novos Desafios da Produção Brasileira
Os atuais desafios impostos pela produção offshore no Brasil têm demandado o
desenvolvimento de ferramentas de projeto e análise cada vez mais precisas e robustas no que
tange à abordagem dos problemas inerentes às atividades desta natureza.
São comuns pesquisas que contam com uma abordagem analítico-numérica,
concomitante a uma abordagem experimental responsável pela geração de resultados para
confrontação e calibração.
O TPN, neste contexto, é uma iniciativa brasileira inovadora caracterizada por uma
infra-estrutura aparelhada com dois elementos principais: um cluster para simulações
numéricas com sala de projeção 3D e um tanque físico especificamente construído para
calibração dos coeficientes hidrodinâmicos de uso no simulador.
Em linhas gerais, o cluster para simulações numéricas é dotado de um conjunto de
processadores trabalhando em paralelo, compondo uma capacidade de 50 teraflops. A
visualização das simulações, por sua vez, conta com um ambiente de realidade virtual, no qual
o expectador tem a possibilidade de interagir com os resultados e, até mesmo, experimentar
parte dos comportamentos dinâmicos dos sistemas em estudo através de um hexapod.
O tanque físico, denominado Calibrador Hidrodinâmico, é uma infra-estrutura
experimental voltada ao estudo de modelos em escala reduzida, cuja característica principal é
a geração de ondas multidirecionais e concomitante absorção das mesmas.
Em resumo, com estas inovações o TPN se habilita como uma infra-estrutura alinhada
às demandas atuais, servindo não só aos novos desenvolvimentos do cenário de produção
nacional de petróleo offshore, como também à formação de recursos humanos
especificamente voltados à atuação no segmento científico-tecnológico brasileiro.
Palavras-chave: Tanque de provas numeric (TPN); cluster de alta performance; de provas
com absorção ativa de ondas; multidisciplinaridade; novas pesquisas e desenvolvimento.
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 2 de 2
TPN – Numerical Offshore tank: an Innovative Infrastructure to the
New Brazilian Production Challenges
Abstract
It is quite evident that the new researches and developments in offshore oil production
have became considerably more complex as a consequence of the recent growing in the
demand and, therefore, the necessity of exploration in ultra deep water. Higher number of
operational conditions has being analyzed, taking into account simultaneous phenomena,
many of them in high level of complexity. In order to provide solutions and answers for many
of the problems involved in such scenario, a multidisciplinary approach, combining analytical
models, numerical tools and experimental activities, has being quite convenient and,
sometimes, the only prospective alternative. According to this philosophy, the Numerical
Offshore Tank - TPN was idealized to work through a cooperative approach. In its new
infrastructure, TPN has a high performance cluster of 50 TeraFLOPS, which runs an
integrated and multitask set of analytical models and numerical tools for a wide diversity of
operational conditions of new offshore and naval architecture projects. In addition, TPN has
an hydrodynamic basin, with active wave absorption, specifically dedicated to generate
experimental results for comparison purpose and, in specific cases, for validation of design
hypothesis and, eventually, new analytical models. This paper presents the main
characteristics of the new TPN, emphasizing capacities and, at the same time, discussing its
limitations. Further researches and developments are prospected based on this new facility, as
well as on the experience accumulated during the last years.
Keywords: Numerical Offshore Tank; high performance cluster; hydrodynamic basin with
active wave absorption; multidisciplinary approach; new researches and developments.
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 3 de 3
1. Introduction
Brazil is currently one of the world leaders in deep and ultra deep water oil and natural
gas exploration as a result of extensive technological research program and strong
investments in exploration technologies.
Among others, the main particularity of the Brazilian oil and gas resources is its
location, along the coast in water depths up to three thousand meters deep. This makes
exploration more difficult and requires the development of new technologies, demanding the
increase of initial investments.
The exploration is performed making use of different types of anchored floating
production units, typically FPSOs or semi-submersibles. The risers and mooring system are
essential elements to extract oil from reservoir and connecting the floating platform to the sea
bed. The risers are pipes allowing the oil outflow from the reservoir and, depending on the
prevailing conditions, are of the rigid or flexible types. Conversely, the mooring lines are
responsible for holding the floating structure in a specific position and can be made of chain,
polyester and other synthetic ropes or a combination of these and are connected to the sea bed
by using anchors.
According to this scenario, there is also the need for special care on validation of the
production units before any start of operation begins. In general, the design requires extensive
small-scale tests at the laboratory. Through wave makers, fans and other systems, the model
tests in basins are able to reproduce the main environmental conditions that the production
units will be subjected to, such as winds, waves and currents, as well as to reproduce the
dynamics of mooring lines and risers.
One of the main challenges in model tests is the selection of the scale. The correct
choice of the model scale is important to represent, in reduced dimensions, the real
phenomena in study, details for this procedure can be found for example in Chakrabarti, S.K.
(1994). The combination of the ultra deep water and the large dimensions of the production
units make strongly difficult to select the model scale in order to represent all the behavior of
these complex systems. For example, in the typical tests basins, it is difficult to represent
correctly the mooring lines and riser system together with the floating unit. Moreover, a large
range of operational conditions must be analyzed experimentally, which involves long time
and expressive amount of capital.
In order to solve these problems, the TPN was created. The Numerical Offshore Tank or
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 4 de 4
TPN is a computational hydrodynamic laboratory for design and analysis on offshore systems,
ships and barges developed for the design and analysis of ships and floating structures
involving the joint efforts of a multidisciplinary expertise team and close partnership among
different universities, research institutes and Petrobras.
Due to the extreme complexity of representing the actual physical phenomena and the
requirement of being able to analyze a particular case in a reasonable and feasible time frame,
the simulator, with an exceptionally large computational power, was inaugurated in February
2002.
To meet the new challenges of high productivity, stringent standards and top quality
research, the TPN carried out a complete modernization of its physical and technological
infra-structure, including the long awaited construction of a dedicated facility, see Figure 1.
Located aside the Department of Naval Architecture and Oceanic Engineering of the Escola
Politécnica, at the University of São Paulo – USP, the new TPN’s lab facility considering:
• A time-domain multi-body dynamic analysis software and a 3D visualization
room for pos-processed analysis;
• A computer cluster composed by high performance processors, enabling parallel
computing to solve the numerical simulations;
• A hydrodynamic basin, the test facility with active wave generation/absorption.
Figure 1: The actual TPN counts with a new cluster and 3D visualization room, as well as a dedicated hydrodynamic basin for calibration of the numerical simulator.
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 5 de 5
2. The Numerical Offshore Tank Activities
The Numerical Offshore Tank was developed to provide an innovative technological
testing facility and to revolutionize the floating structure research field. It was a unique
technological laboratory in the international scientific community.
By means of its researcher center, during the past few years TPN has been involved
with many important studies, among them:
• Various up and running PETROBRAS units have undergone TPN testing,
including P18 and P43, which were the first units to serve as simulator
calibrators;
• Platforms P51 and P52 have also been analyzed by the TPN. Other units such as
P19 still require evaluation in specific operation regimes;
• In 2002, the docking simulation of the Brazilian Navy’s Aircraft carrier Nae São
Paulo was carried out. Because of the small size of the dry dock, there were
serious lateral constraints for the docking operation which required a meticulous
modeling of every single detail of the dry dock, aircraft carrier and surroundings
before the actual full scale operation could take place. The undertaken study was
indispensable for the successful conclusion of the operation;
• Another case study was the Load-Out of the Brazilian Navy’s Timbira
submarine. Structural calculations were conducted for the ramp and the barge
that would transport the submarine. A specific software was created to simulate
the barge ballasting operation and a video, demonstrating the whole operation,
was produced;
• On top of Petrobras’ complete production units, various non-conventional
analyses were performed by TPN. One example was the movement of shuttle
tank near a new PLEM – Pipe Line End Manifold. The concern was that during
offloading operations the ship could crash into the PLEM. The simulation of the
operation was made in the numeric simulator and the result was viewed in
TPNView;
• Another simulation analyzed a sub surface buoy, joining two types of units: a
semi-submersible and a FPSO type vessel. The dynamic stability was verified,
as were tensions in moorings and risers. Damaged conditions were analyzed in
the buoy’s cables and the moorings of the floating unit;
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 6 de 6
• The design of new offshore systems, including detailed seakeeping and stability
analyses:
o MonoGoM, see Costa, A.P. et al. (2005);
o FPSO-BR, see Cueva, D. et al. (2005);
o MonoBR with dry tree capability, see Gonçalves, R.T. et al.(2008) and
Matsumoto, F.T. et al. (2008);
o FPSO-TLWP, see Malta, E.B. et al. (2009) and Rampazzo, F.P. et al.
(2009);
• The design and analyses of mooring and risers system, see Rampazzo, F.P.,
Masetti, I.Q. & Nishimoto, K. (2008);
• Experimental and phenomenological results for fluid-structure interaction:
o Vortex-Induced Vibrations (VIV) in risers, see Rosetti, G.F., Nishimoto,
K. & Wilde, J. (2009);
o Vortex-Induced Motions (VIM) in monocolumn platforms, see
Gonçalves, R.T. et al. (2009) and Fujarra, A.L.C. et al. (2009);
• Moving particle semi-implicit method (MPS), see Maeda, H. et al. (2004) and
Tsukamoto, M.M., Cheng, L.Y. & Nishimoto, K. (2009).
Figure 2 presents some examples of the new design developed in TPN, particularly the
MonoBR and FPSO-BR.
Figure 2: Examples of new designs developed at TPN.
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 7 de 7
3. The Computer Cluster
The modernization efforts included the implementation of a new cluster comprised of a
large number of parallel processing units reaching a 50 TeraFLOPS capacity and, therefore,
allowing high speed numerical simulations and integration with similar clusters available at
Petrobras research centers.
To complement this capacity, a viewing room equipped with leading edge virtual reality
equipment is available, enabling a clearer understanding of the analysis results and deeper
immersion on the research findings. It features a high definition projection system and a six
degree-of-freedom seating capability. Some pictures took before the operational condition are
presented in Figure 3.
Figure 3: Illustration of the new cluster and 3D visualization room.
The numerical simulator developed by TPN is a computer based program capable of
representing full scale conditions with the advantage of not being restricted by the geometric
and physical constraints restrictions model test basins. Its capabilities include the detailed
representation of the floating system motion dynamics, the evaluation of different mooring
and rises arrangements and large spectra of environmental conditions.
Its basic architecture consists of a pre-processor (scientific software), parallelized
processor (core) and post processor (visualization software).
In order to provide a compatible and systematic entry procedure for the extremely large
amount of geometric, physical and environmental data, the TPN team carried out the
development and implementation of the pre-processing program PREA3D which is capable of
guaranteeing the coherence among the data as well as in speeding up the input process.
The software’s core is based on mathematical models that represent the system
dynamics equations and, integrated along time steps, allows the actual motion of the floating
system to be simulated. To evaluate the various external loadings acting on the floating unit,
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 8 de 8
the numerical software makes use of a group of auxiliary hydrodynamic and structural codes.
Among them, the software WAMIT obtains the hydrodynamic coefficients of the wave
dynamic response, ANFLEX and PREADYN are responsible for the line dynamics
calculation and SLOSHING estimates the effect of the liquid movement in ballast or oil tanks.
The simulator’s generated information includes such a large amount of data that it is
quite impossible to analyze them by conventional means. As a consequence, the software
TPNView was developed with resources not only for providing a fundamental tool for
integrated data analysis but also for creating a new scientific virtual reality environment.
The software combines a 3D visualization of the actual motions of the floating system,
of the risers and mooring lines and of the environment waves as well as dynamic analysis
tools such as graphs, histograms and statistics.
4. The Hydrodynamic Basin
As part of the new TPN’s lab facility, the hydrodynamic basin with active absorber has
the main objective of generating a large experimental data base, such as motions,
hydrodynamic forces and coefficients. This data base will be applied for checking and
improving the theoretical models, enabling the simulator to represent as accurate as possible
the full scale dynamic behavior of the analyzed systems. One example is the study of the
second-order motions for large structures; see Simos, A.L. et al. (2008).
The hydrodynamic basin consists of a 14m x 14m rectangular wave tank with depth of
4m with an all around multi-directional wave absorption and generation system based on 148
flap-type wave makers. A graphical illustration of the facility, a picture before commissioning
and the main dimensions are presented in Figure 4.
The system was designed to generate waves in frequency ranging from 0.25 to 3.00Hz
and maximum wave height of 0.40m (considering the limits of the mechanical system and the
theoretical wave breaking limit of 14% in steepness). Details about the control system of the
flaps and dimensions one can be found in de Mello, P.C. et al. (2007).
Wave generation limits can be visualized in Figure 5, by means of the intersection
between limit areas according to the wave steepness, tank height, flap stroke and screw
velocity. In the same figure it is possible to see the typical centenarian spectrum of some
offshore basins under exploration around the world, particularly: Golf of Mexico (USA),
Campos Basin (Brazil) and Tupi Basin (Brazil) for reference scale model equal to 1:100.
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 9 de 9
Figure 5 shows that the new TPN’s hydrodynamic basin was appropriated design for
generating wave excitation of the most important scenarios of offshore oil production.
Figure 4: Graphical views and picture before commissioning of the new wave basin.
Figure 5: Wave height versus frequency limits forthe new hydrodynamic basin.
The instrumentation used in the hydrodynamic basin is the most modern in monitoring
technology. The motion can be registered through six degree-of-freedom video monitoring
and also by conventional methods using accelerometers, rate-gyros (for velocity) and degree
0.5 1 1.5 2 2.5 30
0.1
0.2
0.3
0.4
0.5
freq (Hz)
H (m
)
Limite de CursoLimite de DeclividadeOnda máximaLimite de Velocidade do atuadorCentenária GoMCentenária BCCentenária Tupi
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 10 de 10
sensors.
For free surface monitoring ultrasonic wave probe were specifically developed for the
TPN’s hydrodynamic basin; details about this can be found in de Mello, P.C. et al. (2007).
The advantage of this apparatus in comparison with the conventional capacitive probe is the
facility of calibration that implies a reduced time in the tests.
Due to its faster operation and lower cost compare to similar facilities, it is important to
emphasize that one of the complementary objectives of the TPN’s hydrodynamic basin will be
to develop human resources specifically trained to work in the experimental research for naval
and ocean developments.
5. Conclusion
This paper presented the new TPN’s lab facility composed by: a 50 TeraFLOPS cluster
and a 3D visualization room, which will increase enormously its simulation capacity, and a
hydrodynamic basin for small-scale tests aiming to achieve paradigms for theoretical models
calibration.
Compared to the similar facilities in Brazil, the new TPN’s hydrodynamic basin has a
unique characteristic which means the concomitant generation and absorption of waves. This
peculiar aspect gives to this new basin the capacity to perform long time experiments,
appropriated for studying non-linear phenomena.
The TPN is an innovative and integrated system that brings high technology to naval
and ocean engineering, and thus becomes a fundamental tool for the recent developments.
Together with the principal Brazilian research institutes and Petrobras, TPN works to
ensure that Brazil continues to be efficiently exploring oil in deeper waters, as well as
developing technologies in the state of art.
References
Chakrabarti, S.K. (1994). Offshore Structure Modeling. Advanced Series on Ocean
Engineering.
Costa, A.P., Masetti, I.Q., Cueva, M., Nishimoto, K., Machado, G. & Corte, A. (2005).
Development of a Mono-Column Type Unit for Harsh Environment. Proceedings of the
11th International Congress of the International Maritime Association of the Mediterranean
– IMAM, Lisbon, Portugal.
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 11 de 11
Cueva, D., Campos, F., Donato, M., Ferrari, J.A., Torres, F. & Nishimoto, N. (2005).
Dimensional Study for Brazilian FPSO. Proceedings of the 24th International Conference
on Offshore Mechanics and Artic Engineering. OMAE2005-67333.
Fujarra, A. L., Gonçalves, R. T., Faria, F., Nishimoto, K., Cueva, M., & Siqueira, E. F.
(2009). Mitigation of Vortex-Induced Motions of a Monocolumn Platform. Proceedings of
the 28th International Conference on Ocean, Offshore and Arctic Engineering.
OMAE2009-79380 .
Gonçalves, R.T., Matsumoto, F.T., Medeiros, H.F., Brinati, H.L., Nishimoto, K. & Masetti,
I.Q. (2008). Conceptual Design of Floating Production and Storage with Dry Tree
Capability. Proceedings of the 27th International Conference on Offshore Mechanics and
Artic Engineering. OMAE2008-57440.
Gonçalves, R. T., Fujarra, A. L., Rosetti, G. F., Nishimoto, K., Cueva, M., & Siqueira, E. F.
(2009). Vortex-Induced Motion of a Monocolumn Platform: New Analysis and
Comparative Study. Proceedings of the 28th International Conference on Ocean, Offshore
and Artic Engineering. OMAE2009-79378.
Maeda, H., Nishimoto, K., Masuda, K., Asanuma, T., Tsukamoto, M.M. & Ikoma, T. (2004).
Numerical Analysis for Hydrodynamic Motions of Floating Structures Using MPS Method.
Proceedings of the 23th International Conference on Offshore Mechanics and Artic
Engineering. OMAE2004-51435.
Malta, E.B., Rampazzo, F.P., Cruz, R.E., Oliveira, A.L. & Nishimoto, K. (2009). FPSO and
TLWP Interacting at a Reduced Distance for Dry Tree Completion System. Proceedings of
the 28th International Conference on Ocean, Offshore and Artic Engineering. OMAE2009-
79098.
Matsumoto, F.T., Gonçalves, R.T., Malta, E.B., Medeiros, H.F., Nishimoto, K. & Masetti,
I.Q. (2008). The Influence at Vertical First Order Motions Using a Appendages in a
Monocolumn Platform. Proceedings of the 27th International Conference on Offshore
Mechanics and Artic Engineering. OMAE2008-57410.
de Mello, P.C., Carneiro, M.L., Casetta, L., Simos, A.N., Adamowski, J.C. & Nishimoto, K.
(2007). Development of a Wave Tank with Active Absorption. Proceedings of th 3rd
International Workshop on Aplplied Offshore Hydrodynamics. IWAOH-2007.
Nishimoto, K.; Ferreira, M.D.; Martins, M.R.; Masetti, I.Q.; Martins, C.A., Jacob, B.P.,
Russo, A.; Caldo, J. & Silveira, E.S.S. (2003). Numerical Offshore Tank: Development of
Santos Offshore Conference 2009 21 a 23 de Outubro de 2009 - Mendes Convention Center - Santos - São Paulo - Brasil
Pág: 12 de 12
Numerical Offshore Tank for Ultra Deep Water Oil Production Systems. Proceedings of
the 22nd International Conference on Offshore Mechanics and Arctic Engineering.
OMAE2003-37381.
Rampazzo, F.P., Masetti, I.Q. & Nishimoto, K. (2008). The Mooring System Design
MONOBR Platform for Harsh Environmental Conditions (GoM). 20th Ocean Engineering
Symposium, Tokio, Japan.
Rampazzo, F.P., Malta, E.B., Watai, R.A., Cruz, R.E. & Nishimoto, K. (2009). Design of an
Innovative FPSO-TLWP Coupled System Based on the Numerical Offshore Tank (TPN)
Methodology. Proceedings of the 10th International Marine Design Conference – IMDC,
Trondheim, Norway.
Rosetti, G. F., Nishimoto, K. & Jaap de Wilde. (2009). Vortex-Induced Vibrations on Flexible
Cylindrical Structures Coupled with Non-Linear Oscillators. Proceedings of the 28th
International Conference on Ocean, Offshore and Artic Engineering. OMAE2009-79022.
Simos, A.L., Sparano, J.V., Aranha, J.A.P. & Matos, V.L.F. (2008). 2nd Order
Hydrodynamic Effects on Resonant Heave, Pitch and Roll Motions of a Large-Volume
Semi-Submersible Platform. Proceedings of the 27th International Conference on Offshore
Mechanics and Artic Engineering. OMAE2008-57430.
Tsukamoto, M.M., Cheng, L.Y. & Nishimoto, K. (2009). Numerical Study of the Motions in
Shallow Water Waves of Floating Bodies Elastically Linked to Bottom. Proceedings of the
28th International Conference on Ocean, Offshore and Artic Engineering. OMAE2009-
80126.