Nu Horizons Q4 2012 Edition of Portal

In ThIs Issue:

Your Gateway

to Today’s Leading

Technology Products

deveLoPmenT TooLsamulet TechnologiesLattice semiconductor

disk / inTerfaceallegro microsystems

disPLaYskyocera display americasharp

emBedded soLuTionsiei Technologies

Led LiGhTinGoptoelectronix

memorYissimicronwinbond

Power manaGemenTLinear TechnologymicrelrenesassTmicroelectronics

Power suPPLiesconnect Techexcelsysn2Power

Q4 2012Americas Edition

focus on Power

12 ±0.3V

12 ±0.3V

5A

5A

10A

2m

2m

LTC4370Current Sharing

Controller

Current Sharing Made Easy

Info & Free Samples

, LT, LTC, LTM, Linear Technology and the Linear logo areregistered trademarks of Linear Technology Corporation.All other trademarks are the property of their respective owners.

The LTC®4370 controls N-channel MOSFETs in series with each supply to act like diodes with a variable forward voltage. The forward voltage of the MOSFET is adjusted to offset the mismatch in input supply voltages until the currents from each supply are equal. This provides a simple, supply agnostic, space-saving solution for current sharing between two supplies in high reliability systems. By also incorporating diode blocking behavior, the LTC4370 prevents one supply failure from bring-ing down the entire system.

www.linear.com/product/LTC4370

1-800-4-LINEAR

Current Sharing Error vs Supply Difference Features

•Shares Load Between Two Supplies

•Eliminates Need for Active Control of Input Supplies

•No Share Bus Required

•0V to 18V High-Side Operation

•Enable Inputs

•MOSFET On Status Outputs

•Dual Ideal Diode Mode

•16-Pin DFN (4mm × 3mm) & MSOP Packages

Balances Forward Current, Blocks Reverse Current

Supply Difference (mV)

–750

Shar

ing

Erro

r (%

)

0

5

10

250 500

–5

–10

–20–500 –250 7500

–15

20

15

http://video.linear.com/121

PO

RTA

L C

ON

TE

NT

S

Nu Horizons Electronics is a leading

distributor of advanced technology

semiconductor, display, illumination

and power solutions to a wide variety

of commercial original equipment

manufacturers (OEMs) and electronic

manufacturing services providers

(EMS).

With sales facilities in 45 locations

across North America and Asia and

regional logistics centers throughout

the globe, Nu Horizons partners with

a limited number of best-in-class

suppliers to provide in-depth product

development, custom logistics and

life-cycle support to its customers.

Need more information right away?

Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.

Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).

All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.

APPLICATION NOTES

Atmel / Lattice / LTCDesigning a Portable Multi-Channel Data Acquisition Unit for Non-Destructive Testing

4

Emerson / Lattice / LTC Designing an Industrial Sensor for Proximity and Velocity Measurement 4

DEVELOPMENT TOOLSAmulet Technologies GEMstarter-kits™: Add a great looking GUI to your legacy product 5

Lattice Semiconductor MachXO2 Pico Development Kit 6

Lattice Semiconductor MachXO2 Control Development Kit 6

Lattice Semiconductor Next Generation Design Software 7

Lattice Semiconductor iCE40 Ultra Low Density FPGA Development Kits 7

FEATURED COMPONENTSDisk / Interface Allegro MicroSystems — 3-Phase DC Motor Predriver IC 8

Embedded SolutionsIEI — Digital Signage Series with Intel Performance i3/i5/i7 and Low Power Dual Core Atom Solutions

10

LED Lighting OptoElectronix — Solid State High Output Area Lighting Fixtures 11

MemoryMicron — e-MMC™ — A High-Performing, Single-Package Managed NAND Solution

13

Memory Winbond — Advanced Memory Solutions 14

Power Management LTC — LT4275 - LTPoE++/PoE+/PoE PD Controller 15

Power Management LTC — LTM4620 – Single 26A or Dual 13A µModule Regulator 16

Power Management Micrel — MIC2033/39 – High-Side MOSFET Power Distribution 19

Power ManagementRenesas — Advanced Silicon Power Products Offer Reduced System Cost and High Efficiency

20-21

Power ManagementSTMicroelectronics — STW88N65M5 — Best High Voltage Superjunction MOSFET for PFC and Inverter Applications

22

Power Supplies Connect Tech — Embedded DC/DC Power Supply Solutions 24

Power SuppliesExcelsys — 200-1340 Watt AC/DC Modular Power Supply Enables Next Day Custom Power

25

Power SuppliesN2Power — 200-1340 Watt AC/DC Modular Power Supply Enables Next Day Custom Power

26

ADVERTISEMENTSLinear Technology Current Sharing Made Easy 2

Kyocera Display America New Name, New Synergy, Same Quality... 9

ISSI SPI Flash 12

Linear Technology 42V, 2MHz Sync Buck 17

Micrel Even Electronics Work Better When They Have Peace and Quiet 18

Mean Well Standard Industrial Power Supply 23

Sharp Remember Craftsmanship? We Do! 27

Nu Horizons Power Matrices

Board Level DC-DC Converters: Power Supplies / ModulesSystem Power: AC to DC SuppliesSystem Power: AC to DC ConvertersDigital Power Management and Support DevicesPOL Power: Discrete DC-DC Regulators and Modules; AC-DC PFC Controllers

28-35

Samsung LED / Nu Horizons Innovative Lighting Solutions 36

Nu Horizons LED Lighting Line Card 37

Nu Horizons Display Technologies Line Card 38

Nu Horizons Embedded Solutions / Single Board Computers 39

Nu Horizons Semiconductor Technologies Line Card 40-43

Nu HorizonsEnhance Your Design...With Nu Horizons Education and Development Solutions

44

4 Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes

AP

PL

ICA

TIO

N N

OT

ES

Designing an Industrial Sensor for Proximity and Velocity Measurement

Designing a Portable Multi-Channel Data Acquisition Unit for Non-Destructive Testing

Many industrial processes involve the transport of material from one location to another. Often the proximity and/or velocity of material movement must be measured without actual contact. By using ultra-sonic sensors, these characteristics can be easily measured. An incident ultra-sonic beam is created and the reflected ‘echo’ from the moving object is carefully processed to determine the desired measurements. Ultra-sonic methods can also make accurate measurements independent of the target objects color or transparency- something laser-based systems find difficult.

Ultra-sonic sensors can be found in many conveyor systems where material is moved from place to place and the proximity and velocity of the material (boxes, baggage, components, etc.)

is critical to the control of the system. In many systems, sensors are positioned at critical points and the data is relayed to a central controller so that the performance of the various sections can be separately controlled. This simplifies the optimization of the overall system. The sensors must communicate frequently with the central controller using a standard industrial communications protocol.

This application note will summarize the device selection process for an Ultra-sonic sensor and will illustrate some key design considerations. The key devices needed in the design include an Analog to Digital Converter (ADC) to measure the reflected ultra-sonic signal, an FPGA to process sensor data and communicate the results to the central controller, Point of Load (PoL) power

regulators for on-board power distribution and an AC/DC power supply to provide power to the board.

We will select the ADC from the wide variety of devices offered by Linear Technology, the FPGA from Lattice Semiconductor, the DC/DC uModule™ power regulators from LTC and the AC/DC supply from Emerson. The selection of specific devices will be based on the requirements of the example design and will help illustrate a common approach to device selection that can be used in a variety of designs.

Many industrial applications require portable instrumentation for sensing and measuring the outputs from high-speed analog sensors. In many cases, multi-channel instruments are used when improved resolution is required. For example, multiple sensor channels can be combined into an array to improve resolution and depth perception, providing a 3D-like image of the material structure. This can be done in a non-destructive fashion when ultrasound or low energy lasers are used as the signal source.

A common example application for multi-channel data acquisition is in materials testing where the detection of material defects must be done without damaging or stressing the material. Testing pipes, boat hulls and other metal containers make access difficult so the tester must be able to ‘image’ into the material far enough to detect defects not visible from the surface. Other common techniques include x-rays and magnetics but these are typically confined to lab use only.

This application note will summarize the device selection process and a key design consideration for a multi-channel data acquisition unit like those used for non-destructive testing of metal containers for material defects, weld integrity and stress. The key devices needed in the design include an Analog to Digital Converter (ADC) to measure the reflected signal, an FPGA to collect converted data via a high-speed LVDS interface and control the display, a regulator for on-board power distribution, a microcontroller to implement the system level functions and a display to show captured images.

We will select the ADC from the wide variety of devices offered by Linear Technology, the FPGA from Lattice Semiconductor, and the regulator from Linear Technology. The selection of specific devices will be based on the requirements of the example design and will help illustrate a common approach to device selection that can be used in a variety of designs.

Scan barcode to accessapplication note

Scan barcode to accessapplication note

5

DE

VE

LO

PM

EN

T T

OO

LS

Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development

FEATURES:

Amulet’s GEM Graphical OS Chip™ Color TFT LCD Quick and flexible GUI design with GEMstudio™ software development tool Graphics supported include GIF, JPEG, PNG and more Built in font converter, foreign language character sets (Unicode)

Capacitive: Projected capacitive P-CAP touch sensor from ClickTouch™ Cypress’s TrueTouch® Touchscreen Controller Best in class accuracy, linearity and fast refresh rate Supports multitouch gestures with superior accuracy – highest signal to noise ratio (SNR) Customizable cover glass up to 6mm thick to support virtually any application

BENEFITS:

Add a great looking GUI to an embedded application regardless of host microprocessor size or speed Complete your projects in days Make changes in minutes, not months Offload processing power from your host micro, no matter what size Avoid royalites with Amulet's Graphical OS

GEMstarter-kits™: Add a great looking GUI to your legacy productThe resistive 7", capacitive 4.3", and resistive 4.3" GEMstarter-kits™ provide everything needed to create and run a Graphical User Interface (GUI) for embedded products in a matter of days.

GEMstarter-kits™ provide the quickest, most efficient way to create a graphical user interface for an embedded product. Amulet solutions act as GUI co-processors, allowing embedded product designers and engineers to add a smartphone-like GUI to their product regardless of the type of host microprocessor currently in place. The GEMstarter-kits come with a free GEMstudio™ trial, Amulet’s embedded GUI design tool. GEMstudio™ is the easiest and most flexible graphical user interface (GUI) design tool in the embedded space. It enables designers to easily design, customize, test and implement a high-end user interface into all types of embedded products. As a true WYSIWYG GUI design software tool, it requires absolutely no coding for the embedded GUI design, and no additional developer tools or C++ knowledge. With GEMstarter-kits, embedded engineers and graphic designers alike can create a great looking GUI, test it and modify it as needed. This allows for the many design iterations that are required to create the best user experience possible. The project then can be seamlessly transferred to a production ready module, dramatically speeding up the go-to-market cycle.

Scan barcode for more Gemstarter-kits™ information

Get your GEMstudio license for FREE when buying a starter kit from Nu Horizons: Send your starter kit proof of purchase to [email protected] subject line “Portal Promo” and we’ll give you a GEMstudio™ license for FREE. Offer ends January 31, 2013.

Capacitive 4.3” GEMstarter-kit™

Resistive 7” GEMstarter-kit™

Resistive 4.3” GEMstarter-kit™

APPLICATIONS:

Industrial Controls Medical Test & Measurement

Home & Building Automation Appliances

6

DE

VE

LO

PM

EN

T T

OO

LS


Scan barcode for more MachXO2 Development Kit information

MachXO2 Control Development KitComplete Development Platform for System Control Applications.

MachXO2 Pico Evaluation Board Features:

MachXO2 PLD: LCMXO2-1200ZE-MG132CR1 4-Character 16-segment LCD display 4 capacitive touch sense buttons 1 Mbit SPI Flash I2C temperature sensor Power measurement via delta sigma A2D conversion in the MachXO2 device Expansion header for JTAG, SPI & I2C USB Cable QuickSTART Guide

MachXO2 Control Evaluation Board Features:

MachXO2 LCMXO2-4000HC FPGA Power Manager II POWR1014A mixed-signal PLD 4 Mbit SPI Flash memory microSD (micro Secure Digital) memory socket Audio output channel Up to two DVI sources and one DVI output Up to two 7:1 LVDS sources and one 7:1 LVDS output Expansion header for JTAG, SPI, I2C and PLD I/Os LEDs and switches RS-232/USB and JTAG/USB interface

MachXO2 Pico Development Kit The MachXO2 Pico Development Kit is a battery-powered, low-cost

evaluation platform to accelerate the evaluation of MachXO2 PLDs. Using the

preloaded Environment Scanning system-on-chip (SoC) design provided with the

development kit, you can now test within minutes, popular interfaces such as UART,

SPI, I2C and LCD control using the integrated 8-bit LatticeMico8™ microcontroller

in conjunction with the MachXO2 Embedded Function Bock (EFB). You can then

build your own designs using the free downloadable reference design source code,

implementing these features in less than an hour.

The board also features USB channels for JTAG programming and

debugging from a host PC. The header provides access to a variety of I/O banks of

the MachXO2 device and the on-board I2C bus. The board can be controlled with a

menu driven interface via terminal programs running on a host PC.

Order Number Price

LCMXO2-1200ZE-P1-EVN $29 - Special while supplies last

The MachXO2 Control Development Kit is an easy-to-use platform for rapidly prototyping system control designs using MachXO2 FPGAs. Along with the evaluation board and accessories, this kit includes a pre-loaded control system-on-chip (Control SoC) design that demonstrates board diagnostic functions including I/O control, voltage monitoring, time-stamps and data logging to non-volatile memory. In order to achieve this level of functionality, the demo integrates several Lattice reference designs: the LatticeMico8 microcontroller, master WISHBONE bus controller, Delta-Sigma ADC, SPI master controller, UART peripheral, Embedded Block RAM and additional control functions. These reference designs are free and customizable; enabling designers to build their own designs using the downloadable source code from the Lattice website.

Scan barcode for more MachX02 Control Development Kit information

Order Number Price

LCMXO2-4000HE-C-EVN $189.00

Next Generation Design SoftwareLeading-edge design and implementation tools optimized for Lattice FPGA architectures

iCE40 Ultra Low Density FPGA Development Kits

iCE40 Blink Boards Features:

High-performance, low-power iCE40HX1K or iCE40LP1K FPGA

USB programming, debugging, virtual I/O functions, and power supply

Capacitive-touch buttons

3.3 MHz clock source

1Mbit SPI serial configuration PROM

68 LVCMOS/LVTTL (3.3V) digital I/O connections

Lattice Diamond® design software offers leading-edge design and implementation tools optimized for cost-sensitive, low-power Lattice FPGA architectures. Diamond is the next generation replacement for ispLEVER® featuring design exploration, ease of use, improved design flow, and numerous other enhancements. This combination of new and enhanced features allows users to complete designs faster, easier, and with better results than ever before. Diamond software is available as a download from the Lattice website for both Windows and Linux. Once downloaded and installed, it can be used with either a free license or a subscription license.

The Lattice iCE40 Blink boards are a low-cost platform for evaluating

and developing with the low-power iCE40HX1K or iCE40LP1K FPGA. The

board provides access to general-purpose I/O and includes capacitive-

touch buttons and LEDs. The board is powered and programmed via USB.

An on-board microcontroller enables 2-way communication with the

iCE40 FPGA.

The free iCEcube2™ development tool controls programming,

accesses virtual I/O functions, and runs the included demos. The tools can

be downloaded from the Lattice website (http:www/latticesemi.com).

Scan barcode for more iCE40 Development Kit information

Scan barcode for more Lattice Diamond Software information

Order Numbers

iCE40HX1K-BLINK-EVN iCE40LP1K-BLINK-EVN

7

DE

VE

LO

PM

EN

T T

OO

LS


Diamond Software Free LicenseA free license can be requested from the Lattice website. This license provides immediate access to many popular Lattice devices such as MachXO2™, MachXO™, LatticeXP2™ and LatticeECP2™ at no cost. It includes Synopsys® Synplify Pro™ for Lattice synthesis and Aldec® Active-HDL™ Lattice Edition II mixed language simulator.*

Diamond Software Subscription LicenseA subscription license can be purchased which adds support for all Lattice FPGAs including the latest LatticeECP4™ and LatticeECP3™ devices. It also includes Synopsys Synplify Pro for Lattice synthesis and Aldec Active-HDL Lattice Edition II mixed language simulator*

DIS

K /

INT

ER

FA

CE

8 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

APPLICATIONS:

Office automation for LBP drum drivers, copiers

Industrial for fans and blowers in telecommunications equipment

Consumer for white goods, fans, blowers and pumps

Can be used to drive some DC motors

The A4931 is a complete 3-phase brushless DC motor pre-

driver. The device is capable of driving a wide range of N-channel

power MOSFETs and can support motor supply voltages up to

30 V. Commutation logic is decoded internally and requires only

three Hall-element inputs spaced at 120° High side MOSFET

gate drive is provided by the on-chip charge pump. This topology

makes the A4931 ideal for driving 3 phase BLDC motors with

frame sizes of 36mm and smaller.

Other features include fixed off-time pulse width modulation

(PWM) current control for limiting inrush current, locked-rotor

protection with adjustable delay, thermal shutdown, overvoltage

monitor, and synchronous rectification. Internal synchronous

rectification reduces power dissipation by turning on the

appropriate MOSFETs during current decay, thus shorting the

body diode with the low RDS(on) MOSFET. Overvoltage protection

disables synchronous rectification when the recirculating motor current pumps the supply voltage beyond the overvoltage threshold during current

recirculation.

The A4931 features enable, direction, and brake inputs that can control current using either phase or enable chopping. Logic outputs FG1 and

FG2 can be used to accurately measure motor rotation. Output signals toggle state during Hall transitions, providing an accurate speed output to a

microcontroller or speed control circuit.

Operating temperature range is –20°C to 105°C. The A4931 is supplied in a 5 mm × 5 mm, 28-terminal QFN package with exposed thermal pad.

This small footprint package is lead (Pb) free with 100% matte tin leadframe plating.

Scan barcode for more information onAllegro's 3-Phase DC Motor Predriver ICs

3-Phase DC Motor Predriver ICDesigned for Lower Current Applications

FEATURES: BENEFITS:

8 V to 38 V motor supply voltage rating High supply voltage rating provides headroom to prevent damage due to regenerative pump up of the motor supply.

Small 28 pin 5 mm x 5 mm x 0.9 mm QFN package with exposed power pad

The small footprint is important when PC board space is limited. Exposed pad package has low thermal resistance for improved thermal performance.

Outputs to drive external all N-Channel MOSFET three phase bridge

High side N-Channel MOSFETS are lower cost than P-Channel MOSFETS of equivalent Ron. Only two extenal capactors are needed.

Enable, direction, and brake inputs A4931 can be used in speed, position and torque control applications.

Fixed off time PWM current control Limits maximum motor current to prevent motor or output MOSFET damage.

FG1 and FG2 outputs One Hall and all three Hall transition outputs provide flexibility for a variety of speed control applications.

Locked rotor detection/protection Programmable lock detect time limits time at stall (no FG signal change) before outputs are disabled to prevent output stage or motor overheating.

Hall element inputs Hall elements are lower cost than Hall switches and internal noise filtering prevents false commutation signals.

Internal commutation table Commutation table internally decoded based on hall inputs saving microprocessor I/O and software operations

APPLICATIONS:

Office automation for LBP drum drivers, copiers

Industrial for fans and blowers in telecommunications equipment

Consumer for white goods, fans, blowers and pumps

Can be used to drive some DC motors

EM

BE

DD

ED

SO

LU

TIO

NS


IEI provides industrial-grade media players ideally for ruggedized digital signage

applications in retail, hospitality, education, medical, transportation, corporate and

many other environments. IEI’s purpose-built media players offer customers scalable

selection from good, better to best solutions with affordable pricing.

To optimize the applications, IEI not only supplies ruggedized components, but also

provides reliable integrated system with extended technical consulting and service

support. And the great flexibilities from our product design – same form factor but

adopt both Mobile and Desktop platform – give our customers the great advantages

on project design-in & -win, budget management, future upgrade capability.

BENEFITS:

Ease of Purchase

Ease of Use

Low Costs

Best-in-Class design

MAXIMIZE YOUR IMAGINATION WITH THE MOST COMPLETE IEI DIGITAL SIGNAGE SOLUTIONS:

Introducing IEI Digital Signage Series with Intel Performance i3/i5/i7 and Low Power Dual Core Atom SolutionsThe #1 Industrial PC Manufacturer brings new cutting-edge technology for the world’s most demanding digital signage environment

Scan barcode for more IEI Digital Signage information

IEI Technology USA Corp.

EBC-3220 Versatile Platform Highlight

Available for both Intel Mobile and Desktop platform ranged from basic (Intel

Atom), mainstream (Intel Pentium/Celeron/ Core 2 Duo/ Core i3) to high-end

(Intel Core i5/ i7). Ideal for enterprise and commercial applications.

IDS Fanless Platform Highlight

Intel H61 Fanless Design Digital Signage Player

Supports Display Port, DVI/VGA, Gigabit Ethernet, USB 2.0

Intel HD Graphics with Full HD video decoding capability

OPS (Open Pluggable Specification) Platform Highlight

Designed for pin compliance with Intel® OPS (Open Pluggable Standard)

Supports Display Port, HDMI, UART, USB 2.0

Audio via JAE-80 pin connector

Intel® Q67/H61 platform

Custom engineering

Global Service

ODM / OEM service

Quality assurance

11

LE

D L

IGH

TIN

G

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

OptoElectronix designs and manufactures a broad range of high quality, high output area lighting fixtures. Standard versions of these products are

available in a number of beam angles, light color temperatures, and light outputs. They can also be manufactured to customer-specified finishes, diffusions

levels and lengths. Most are certified by the DesignLights Consortium, making them eligible for rebates from many utilities.

OPTO utilizes automated manufacturing equipment and controls all aspects of parts procurement, production and test to assure the highest quality

products. All OPTO products have an expected life of more than 50,000 hours and carry a 5 year warranty.

Scan barcode for more Solid State LED lighting fixture information

APPLICATIONS:

Sign lighting

Building wall washers

Exterior parking lots

Parking bays and garages

Solar carports

Warehouse and factory lighting

Commercial building interior lighting

Parking lot "shoebox" light retrofits

Commercial refrigeration

Flood lighting

Cove and indirect lighting

Solid State High Output Area Lighting FixturesHigh quality, LED-based light fixtures designed for lighting applications requiring high output lights both indoors and outdoors. LED lights save money by using less electricity, lasting longer, and requiring less labor for maintenance, while providing higher quality illumination than other outdoor lights.

1 Life expectancy based on industry standard L70 point (70% of the original light output)2 Warranty = 5 years

ULF4000 ULF8000 ULF11000 ULF12000

Lumens Beam AngleInput

VoltagePower (watts)

IP Rating Life Expectancy1, 2 Special Features

ULF4000 1300 120 90-277 18 66 50,000+ hours

ULF80001000 110 90-277 16 65 50,000+ hours NSF certified, custom lengths

available2400 110 90-277 38 65 50,000+ hours

ULF110002000 60, 90 90-277 27 66 50,000+ hours DLC Certified

4000 60, 90 90-277 50 66 50,000+ hours DLC Certified

ULF120008000 90, 160 90-277 100 66 50,000+ hours DLC Certified

12000 90. 160 90-277 160 66 50,000+ hours DLC Certified

ULF15000 8000 90, 160 90-277 100 66 50,000+ hoursDLC Certified

Retrofits "shoe box" fixtures

13For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

ME

MO

RY

e-MMC™ — A High-Performing, Single-Package Managed NAND SolutionInternal NAND management provides ease of design, faster time to market, and higher system performance

Micron’s e-MMC embedded memory combines our high-quality, low-cost NAND Flash memory with

a high-speed MultiMediaCard (MMC) controller in a low-profile FBGA package. This single-

package solution provides internal NAND management, including error correction

code (ECC), wear leveling, and bad block management. The high-

performance controller also performs several low-level tasks usually

done by the processor. Handling errors and low-level tasks internally

takes the burden off the host and increases speed, providing higher

system performance. This fully internal management also makes NAND

technology transitions invisible to the host and provides customers with the

ability to reduce their time-to-market and to sustain products longer and more easily.

e-MMC embedded memory comes in a small FBGA package. It also provides a standard JEDEC interface, simplifying both hardware and software integration. It’s

a consistent, technology-independent solution that streamlines the development and qualification process. All of these features make it both easy to use and design in.

Micron’s e-MMC products also offer NAND partitioning and advanced security features, in keeping with JEDEC’s e-MMC 4.41 specification. The NAND partitioning

feature enables designers to configure partitions in the MLC NAND to act as SLC NAND to safely and securely store and execute handset boot code. The heightened

security features restrict access to critical software, such as the boot code and operating system, and provide increased security when erasing data. e-MMC is a great

choice for designers who are looking for MMC-like, application-to-application interoperability in a wide range of applications— consumer, networking, industrial and

automotive. And because Micron manufactures the NAND components, we can offer e-MMC memory solutions in a variety of densities and options.

BENEFITS:

High system performance

Ease of design and validation

Easy-to-use FBGA package

Compact footprint

Fast time to market

Compatibility between host and storage devices

Scalable for future use

Ideal for both commercial and industrial use

APPLICATIONS:

Smartphones

Tablet PCs

Mobile phones

E-readers

PDAs

Handheld electronics

Digital video cameras

Game consoles

Multimedia equipment

Navigation

Infotainment

FEATURES:

2–64GB

3.3V VCC (3.3V or 1.8V I/O) or 1.8V VCC (1.8V I/O)

High speed: up to 52 MB/s

Standard and extended operating temperature ranges: –25°C to +85°C commercial –40°C to +85°C industrial (IT)

1-bit, 4-bit, or 8-bit I/Os

JEDEC-standard package and interface

Internal NAND management

NAND partitioning

Advanced security features

Stringently tested for quality and reliability

Scan barcode for more e-MMC information

Scan barcode to accessMicron's Full Part Catalog

ME

MO

RY


Scan barcode for more Winbond memory solutions

Advanced Memory Solutions

SPIFLASH® SERIAL FLASH MEMORIES:

Winbond's W25X and W25Q SpiFlash® memories feature the popular Serial Peripheral Interface (SPI), densities from 1M to 256M-bit, small erasable sectors and the industry's highest performance. The W25Q family operates up to 104MHz and supports "Quad-SPI", increasing effective clock rate to 416MHz. SpiFlash® memories offer a pin, space and cost efficient alternative to ordinary Parallel Flash memories, and are ideal for a wide range of applications including: PCs, DVD, Blu-Ray, WLAN, DSL & Cable modems, Printers, Hard Drives, Set Top Box, LCD-TV, Mobile Phones, Bluetooth, GPS, MP3, Meters, DSP, FPGAs, Automotive and more.

PARALLEL FLASH MEMORIES:

Winbond's W29GL family of Page Mode Parallel Flash memories are offered in densities from 32Mb to 256Mb and support industry standard interfaces and architectures. They are drop-in replaceable to the x29GL products available in the industry with no firmware change. They also offer faster program and erase times which improves customer throughput and offers faster firmware updates. Our Parallel Flash products are ideal for a wide variety of applications including: Networking, set-top-box, DSL and cable modems, servers, industrial, wireless routers, PC peripherals, printers, mobile phones, digital cameras and more.

SPECIALTY AND MOBILE DRAM:

Winbond DRAM product portfolio consists of high performance Mobile DRAM and Graphics DRAM. These products are widely used by leaders in the consumer, communication, computer peripheral and automobile markets. Specialty DRAM products are used in all applications excluding main PC memory. Besides discrete parts, Winbond also offers Known-Good-Die (KGD) in wafer format to System-in-Package (SiP) and Multi-Chip-Package customers (MCP). Winbond performs 100% burn-in and on-speed test to ensure high quality on our KGD products.

DensitySecure Sectors

Speed (ns) Page Access (ns) PackageBoot/Uniform Sectors Sector Location

32M-bitTop/Bottom Boot Top/Bottom two sectors 70 25 TSOP48, TFBGA48, LFBGA64

Uniform Sector High/Low Sector 70 25 TSOP56, LFBGA64

64M-bitTop/Bottom Boot Top/Bottom two sectors 70 25 TSOP48, TFBGA48, LFBGA64

Uniform Sector High/Low Sector 70 25 TSOP56, LFBGA64

128M-bit Uniform Sector High/Low Sector 90 25 TSOP56, LFBGA64

256M-bit Uniform Sector High/Low Sector 90 25 TSOP56, LFBGA64

Density Speed MHz Voltage Package Temp AEC-Q100 Automotive

512K-bit 50/104 2.5V SO8, TSSOP8, WSON8, USON8 I

1M-bit 50/104 2.5V, 3V SO8, TSSOP8, VSOP8, WSON8, USON8 I

2M-bit 50/80/104 2.5V, 3V SO8, VSOP8, WSON8, USON8 I, A √

4M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, PDIP8, USON8 I, A √

8M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, PDIP8, USON8, WLBGA8 I, A √

16M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, WLBGA8 I, A √

32M-bit 80/104 1.8V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24 I, A √

64M-bit 80/104 1.8V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24 I, A √

128M-bit 70/104 1.8V, 3V S08, VSOP8, SO16, WSON8, PDIP8, TFBGA24 I, A √

256M-bit 104 3V SO16, WSON8, TFBGA24 I, A √

Density/ Interface

Specialty DRAM Mobile RAM

SDR DDR DDR2 DDR3 GDDR3 PSRAM LPSDR/ LPDDR

LP DDR2

16Mb Yes

32Mb Yes Yes Yes

64Mb Yes Yes Yes

128Mb Yes Yes Yes Yes Yes

256Mb Yes Yes Yes Yes Yes TBD

512Mb Yes Yes Q4-12

1Gb Yes Yes Yes Q2-13 Q2-13

2Gb Yes Yes TBD Q4-12

15

PO

WE

R M

AN

AG

EM

EN

T


LT4275 - LTPoE++/PoE+/PoE PD ControllerHigh Efficiency PoE++™ PD Controllers Provide up to 90W Delivered Power

The LT®4275 is a pin-for-pin compatible family of IEEE 802.3 and LTPoE++ powered device (PD) controllers.

The LT4275A employs a proprietary LTPoE++ classification scheme, delivering 38.7W, 52.7W, 70W or 90W of power at the PD RJ45 connector. The LT4275A is fully compatible with IEEE 802.3. The LT4275B is an IEEE 802.3at compliant, Type 2 (PoE+) PD delivering up to 25.5W. The LT4275C is an IEEE 802.3af compliant, Type 1 (PoE) PD delivering up to 13W.

The LT4275 internal charge pump provides an N-channel MOSFET solution, eliminating a larger and more costly P-channel MOSFET. A low RDS(ON) MOSFET also maximizes power delivery and efficiency, reduces power and heat dissipation, and eases thermal design. Startup inrush current is adjustable with an external capacitor. The LT4275 also includes a power good output, on-board signature resistor, undervoltage lockout, and thermal protection. The LT4275A/LT4275B drives a single opto-coupler to indicate the power level of the attached PSE. Pin-selectable support for non-standard low voltage operation is provided. Auxiliary power override is supported with the AUX pin.

The LT4275A can be configured to support all possible LTPoE++, 802.3at and 802.3af power levels with external component changes.

FEATURES:

IEEE 802.3af/at and LTPoE++ Powered Device (PD) Controller

LTPoE++ Supports Power Levels Up to 90W

LT4275A Supports All of the Following Standards:

LTPoE++ 38.7W, 52.7W, 70W and 90W

IEEE 802.3at 25.5W Compliant

IEEE 802.3af Up to 13W Compliant

LT4275B is IEEE 802.3at/af Compliant

LT4275C is IEEE 802.3af Compliant

100V Absolute Maximum Input Voltage

Wide Junction Temperature Range (–40°C to 125°C)

Overtemperature Protection

Integrated Signature Resistor

External Hot Swap™ N-Channel MOSFET for Lowest Power Dissipation and Highest System Efficiency

Programmable Aux Power Support as Low as 9V

Optional Support of Non-Standard Low Voltage PoE

Available in 10-Lead MSOP and 3mm × 3mm DFN Packages

APPLICATIONS:

High Power Wireless Data Systems

Outdoor Security Camera Equipment

Commercial and Public Information Displays

High Temperature Industrial ApplicationsScan barcode for more

LT4275 information

4275f

LTPoE++ 90W Powered Device Interface

LT4275 Family

MAX DELIVERED POWER

LT4275 GRADE

A B C

LTPoE++ 90W �

LTPoE++ 70W �

LTPoE++ 52.7W �

LTPoE++ 38.7W �

25.5W � �

13W � � �

LT4275A

VPORT HSGATE

GND4275 TA01a

IEEEUVLO

HSSRC

AUX

RCLASSRCLASS++

RCLS++

PWRGD

T2PRCLS

CPD0.1µFVPORT

DATAPAIR

SPAREPAIR

RUN

47nF

3.3k

FDMC86102

VIN

VOUT

+

–

ISOLATEDPOWERSUPPLY

OPTO PSE TYPE(TO µP)

+

–

~

~

+

–

~

~

+CPORT

VAUX (9V TO 60V)

4275f

LTPoE++ 90W Powered Device Interface

LT4275 Family

MAX DELIVERED POWER

LT4275 GRADE

A B C

LTPoE++ 90W �

LTPoE++ 70W �

LTPoE++ 52.7W �

LTPoE++ 38.7W �

25.5W � �

13W � � �

LT4275A

VPORT HSGATE

GND4275 TA01a

IEEEUVLO

HSSRC

AUX

RCLASSRCLASS++

RCLS++

PWRGD

T2PRCLS

CPD0.1µFVPORT

DATAPAIR

SPAREPAIR

RUN

47nF

3.3k

FDMC86102

VIN

VOUT

+

–

ISOLATEDPOWERSUPPLY

OPTO PSE TYPE(TO µP)

+

–

~

~

+

–

~

~

+CPORT

VAUX (9V TO 60V)

LTM4620 – Single 26A or Dual 13A µModule Regulator Scalable to 100A with four LTM®4620 µModule® Regulators

The LTM4620 is a complete dual 13A output switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductors, and all supporting components. Operating from an input voltage range of 4.5V to 16V, the LTM4620 supports two outputs each with an output voltage range of 0.6V to 2.5V, set by a single external resistor. Its high efficiency design delivers up to 13A continuous current for each output. Only a few input and output capacitors are needed.

The device supports frequency synchronization, multiphase operation, Burst Mode operation and output voltage tracking for supply rail sequencing and has an onboard temperature diode for device temperature monitoring. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability.

Fault protection features include overvoltage and overcurrent protection. The power module is offered in a proprietary space saving and thermally enhanced 15mm x 15mm x 4.41mm LGA package with integrated top-side heat sink. The LTM4620 is RoHS compliant with a PB-free finish.

FEATURES:

Complete Standalone Dual Output Power Supply

Dual 13A or Single 26A Output

Wide Input Voltage Range: 4.5V to 16V

Output Voltage Range: 0.6V to 2.5V

±1.5% Maximum Total DC Output Error

Multiphase Current Sharing with Multiple LTM4620s Up to 100A

Differential Remote Sense Amplifier

Current Mode Control/Fast Transient Response

Adjustable Switching Frequency

Overcurrent Foldback Protection

Frequency Synchronization

Internal Temperature Sensing Diode Output

Output Overvoltage Protection

Low Profile (15mm x 15mm x 4.41mm) LGA Package

APPLICATIONS:

Telecom and Networking Equipment

Storage and ATCA Cards

Industrial Equipment

PO

WE

R M

AN

AG

EM

EN

T

16

Scan barcode for moreLTM4620 information


For LTM4620 Video TechClips visithttp://video.linear.com/p4634or scan the black QR code with

your smart phone.

26A, 1.2V Output DC/DC µModule® Regulator1.2V Efficiency vs IOUT

OUTPUT CURRENT (A)0

EFFI

CIEN

CY (%

)

90

60

70

80

50

4016 2610 12 14 2418 20 222 4 6 8

5VIN/500kHz12VIN/500kHz

LTM4620

VIN

TEMP

RUN1RUN2TRACK1

TRACK2

fSET

470µF6.3V

60.4k

5k

100µF6.3V

PHASMD

VOUT1

VOUTS1

SW1

VFB1

VFB2

COMP1

COMP2

VOUTS2

VOUT2VOUT1.2V AT 26A

SW2

PGOOD2

PGOOD

MODE_PLLIN CLKOUT INTVCC EXTVCC PGOOD1

PGOOD

SGND GND DIFFP DIFFN

DIFFOUT

470µF6.3V

100µF6.3V

121k

10k*

5.1V*

VIN 4.5V TO 16V

120k

0.1µF

22µF× 425V

4.7µF

INTVCC

* PULL-UP RESISTOR AND ZENER ARE OPTIONAL

+

+

26A, 1.2V Output DC/DC µModule® Regulator1.2V Efficiency vs IOUT

OUTPUT CURRENT (A)0

EFFI

CIEN

CY (%

)

90

60

70

80

50

4016 2610 12 14 2418 20 222 4 6 8

5VIN/500kHz12VIN/500kHz

LTM4620

VIN

TEMP

RUN1RUN2TRACK1

TRACK2

fSET

470µF6.3V

60.4k

5k

100µF6.3V

PHASMD

VOUT1

VOUTS1

SW1

VFB1

VFB2

COMP1

COMP2

VOUTS2

VOUT2VOUT1.2V AT 26A

SW2

PGOOD2

PGOOD

MODE_PLLIN CLKOUT INTVCC EXTVCC PGOOD1

PGOOD

SGND GND DIFFP DIFFN

DIFFOUT

470µF6.3V

100µF6.3V

121k

10k*

5.1V*

VIN 4.5V TO 16V

120k

0.1µF

22µF× 425V

4.7µF

INTVCC

* PULL-UP RESISTOR AND ZENER ARE OPTIONAL

+

+

VIN VOUT

12VIN to 3.3VOUT Efficiency100

90

80

70

60

50

400.50 1.00 1.50 2.00 2.50

Load Current (A)

Effic

ienc

y (%

)

FSW = 700kHz

LT8610-3.3

42V, 2MHz Sync Buck

Info & Free Samples

The LT®8610/11 are our first constant frequency, ultralow quiescent current high voltage monolithic synchronous buck regulators. They consume only 2.5µA of quiescent current while regulating an output of 3.3V from a 12V input source. Their low ripple Burst Mode® operation maintains high efficiencies at low output currents while keeping output ripple below 10mVP-P. Even at >2MHz switching frequency, high step-down ratios enable compact footprints for a wide array of applications, including automotive. The LT8611 enables accurate current regulation and monitoring for driving LEDs, charging batteries or supercaps, and for controlling power dissipation during fault conditions.

www.linear.com/product/LT8610

1-800-4-LINEAR

LT8610 Demo Circuit

Features

•3.4V to 42V Input Range

•2.5µA IQ Regulating @ 12VIN to 3.3VOUT

•Output Ripple <10mVP–P

•99.9% Duty Cycle for Low Dropout

•94% Efficiency at 1A, 12VIN to 3.3VOUT

•>2MHz Operation even with High Step-down Ratios

•Accurate Input/Output Current Regulation, Limiting and Monitoring (LT8611)

2.5A Output Current, 2.5µA IQ, 94% Efficient

, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks of Linear Technology Corporation. All other trade-marks are the property of their respective owners.

http://video.linear.com/114

Actual Size15mm x 18mm

www.micrel.com© 2012 Micrel, Inc. All rights reserved.Micrel, Innovation Through Technology and Ripple Blocker are are trademarks of Micrel, Inc.

Even electronics work betterwhen they have peace and quiet.

Ideal for use in: Medical imaging applications Tablet/PC/notebook computers Webcams, digital still and video cameras Security and surveillance cameras Videoconferencing Bar code scanners Smartphone cameras and RF power Global Positioning Systems (GPS) Automotive and industrial applications

For more information, contact your local Micrel sales representative, or visit Micrel at: www.micrel.com/ad/RippleBlocker/

Realize unmatched PSRR performance for noise-sensitive applications.

Ripple Blocker (MIC94300/MIC94310) attenuates ripple voltage in any power supply design.• 80dB of PSRR at 1kHz• 60dB of PSRR at 5MHzEnable clean system power to increase overall system performance.• Higher RF transmission signal strength• Increase dynamic signal integritySave space and cost when implementing feature-rich system solutions.• Up to 63% smaller solution than discrete

alternatives• 0.8mm x 0.8mm 4 bump, WLCSP

Scan this code to learn more!

Ripple Blocker™Power Supply Output Noise Attenuator

Ripple Blocker NuHo 8.5x11.indd 1 9/14/2012 12:23:17 PM

19

PO

WE

R M

AN

AG

EM

EN

T

FEATURES:

±5% current limit accuracy

Input supply range from 2.5V to 5.5V

Low quiescent current:

100µA typical (switch ON)

75mΩ typical RDS(ON) at 5V

Current limit options: 0.5A, 0.8A, 1A, and 1.2A

Soft-start control via an external capacitor

Under-voltage lockout (UVLO)

Fast response time (10µs) to short circuit loads

Fault status output flag

Logic controlled enable (active-high, active-low)

Thermal shutdown

Pin compatible with MIC2005

6-pin 2mm x 2mm thin DFN and 6-pin SOT-23 packages

Junction temperature range from −40°C to +125°C

0.2A to 2.5A adjustable output current (MIC2039)

Kickstart - momentary secondary current limit threshold (120ms period) (MIC2039)

Soft-start functionality (MIC2039)

Fast 10µs short-circuit response time (non-Kickstart options) (MIC2039)

Pin compatible with the MIC2009/MIC2019 (MIC2039)

APPLICATIONS:

USB Applications

STBs

Consumer Electronics


Scan barcode for more MIC2033/39 information

MIC2033/39 – High-Side MOSFET Power DistributionIncreased System Reliability

Micrel’s MIC2033/39 are high-side MOSFET power distribution switches providing increased system reliability utilizing 5 percent current limit accuracy. The MIC2033 has an operating input voltage range from 2.5V to 5.5V, is internally current limited and has thermal shutdown to protect the device and system. The MIC2033/39 are offered with either active-high or active-low logic level enable input controls, has an open drain fault status output flag with a built-in 32ms delay that asserts low during over current or thermal shutdown conditions.

The devices are available in several different fixed current limit options: 0.5A, 0.8A, 1A, and 1.2A. A capacitor adjustable soft-start circuit minimizes inrush current in applications where high capacitive loads are used.

Ideal for USB and USB peripherals, notebooks and consumer electronics, general purpose power distribution and DVDs and STBs, the device is offered in both 6-pin SOT-23 and 6-pin 2mm x 2mm thin DFN packages. The MIC2033 has an operating junction temperature range of -40°C to +125 °C.

Standard Part Number Enable Package

MIC2039AYM6 Active High SOT-23-6L

MIC2039BYM6 Active Low SOT-23-6L

MIC2039AYMT Active High 6-pin 2mm x 2mm Thin DFN(*)

MIC2039BYMT Active Low 6-pin 2mm x 2mm Thin DFN(*)

MIC2039EYM6 Active High SOT-23-6L

MIC2039FYM6 Active Low SOT-23-6L

MIC2039EYMT Active High 6-pin 2mm x 2mm Thin DFN(*)

MIC2039FYMT Active Low 6-pin 2mm x 2mm Thin DFN(*)

MIC2033-05AYM6 Active High SOT-23-6L

MIC2033-05BYM6 Active Low SOT-23-6L

MIC2033-05AYMT Active High 6-pin 2mm x 2mm Thin DFN

MIC2033-05BYMT Active Low 6-pin 2mm x 2mm Thin DFN

MIC2033-55AYM6* Active High SOT-23-6L

MIC2033-55AYMT* Active High 6-pin 2mm x 2mm Thin DFN













Note: * Thin DFN is a GREEN RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.

PO

WE

R M

AN

AG

EM

EN

T


Advanced Silicon Power Products Offer Reduced System Cost and High EfficiencyThe continuous proliferation of electronic equipment requires a strong commitment to energy efficiency. Regulations are getting tighter and Renesas Electronics has the answer to the engineer looking for high efficiency and low cost impact solutions.

Mode Part # Features Applications

CCM

Interleaved R2A20114R2A20104

Small current rippleAverage SW noise

More complex circuit

ServerAir conditioner

Induction heating

Single R2A20115 Large current ripple

Large SW noiseSimple circuit

Plasma TVPC

Office automation

CRM

Interleaved

R2A20132R2A20118AR2A20117R2A20112

Small current rippleAverage SW noise

More complex circuit

Air conditionerPlasma TV

PCOffice automation

Single R2A20113 Large current ripple

Large SW noiseSimple circuit

LCD monitorAC adaptor

LCD projector

PFC Control ICs

Wide range of PFC control IC that deliver high power conversion efficiency at virtually all load levels. The R2A20114 (continuous conduction mode, interleaved) for high-output power supplies (1 kW to several kW) and the R2A20132SP IC (critical conduction mode, interleaved) for medium-output power supplies (200 W to 2 kW) are now used in a large number of PCs and servers.

A PFC (power factor correction) IC suppresses the peak power level by using harmonic control to use power efficiently, thus achieving energy savings. However, since the factors valued by customers' end products (efficiency, low spurious radiation, protective functions against malfunction, cost reduction through fewer parts) and the balance of these factors or power supply requirements differ, PFC ICs of a variety of specifications are needed.

PFC function can be achieved in 2 ways:

Passive PFC: Uses passive components to compensate for reactive energy loss: Not very efficient

Active PFC: Uses PFC Control ICs or MCUs to drive solid state switches (MOSFETs, IGBTs, DIODEs) with PWM signals in combination with passive reactive components such as inductors : Better suited for high efficiency systems

Renesas Electronics is PFC technology leader. Offering a wide product line with specifications covering a broad power range, Renesas Electronics contributes to the realization of an energy-efficient society:

APPLICATIONS:

White Goods

Industrial Equipment

Servers

Power Supplies

Flat Panel TVs

Monitors

AC Adaptors

Lighting

IGBTs:

Low Vce(sat), ultra High-Speed (40-60ns typ.) 600V IGBTs with or without built-in FRD. These are available in industry-standard packages at up to 90A ratings (at 25°C) and suitable for high power (>3kW) PFC applications.

Part numberVCE (V)

IC(A)VCE(sat) (V) tf (ns)

TypFRD PKG

Typ IC(A) VGE (V)

RJP6085DPN 600 40 2.65 40 15 (40)*1 - TO-220AB

RJP6085DPK 600 40 2.65 40 15 (40)*1 - TO-3P

RJH6085BDPK 600 40 3.0 40 15 60 YES TO-3P

RJH6086BDPK 600 45 3.4 45 15 45 YES TO-3P

RJH6087BDPK 600 50 3.5 50 15 50 YES TO-3P

RJH6088BDPK 600 60 3.5 60 15 60 YES TO-3P

SuperJunction (SJ) MOSFETs

This new line of high-voltage SJ-MOSFETs combines

very low RDS(on) and ultra-low Qgd and enables very

high-efficiency PFC designs. Available in industry-

standard TO-220, TO-247, TO-3P, and SMD packages

such as TO263.

PKG P/NVDSS

[V]ID[A]

RDS(on) [Ω]Typ./Max

Qg typ.

[nC]

MP-3A RJK60S3DPD 600 12 0.35/0.44 13

LDPAK-S

RJK60S3DPE 600 12 0.35/0.44 13

RJK60S4DPE 600 16 0.23/0.29 17.5

RJK60S5DPE 600 20 0.15/0.178 27

TO-220FP

RJK60S3DPP-E0 600 12 0.35/0.44 13

RJK60S4DPP-E0 600 16 0.23/0.29 17.5

RJK60S5DPP-E0 600 20 0.15/0.178 27

RJK60S7DPP-E0 600 30 0.10/0.125 39

TO-220AB RJK60S5DPN 600 20 0.15/0.178 27

TO-247

RJK60S5DPQ-E0 600 20 0.15/0.178 27

RJK60S7DPQ-E0 600 30 0.10/0.125 39

TO-3PSG

RJK60S5DPK-M0 600 20 0.15/0.178 27

RJK60S7DPK-M0 600 30 0.10/0.125 39

RJK60S8DPK-M0 600 55 0.045/0.056 82

Low VF, low Trr FRD Diodes

Full line of Low VF FRD (Fast Recovery Diodes) perfectly suitable for PFC applications, both CRM and CCM.

Series Part Number Voltage (V) IF @ 25˚C (A) IF@100˚C (A) VF (V) (typ) Trr (typ) (ns) PKG

Low VF, RJU60C*

Series

RJU60C2SDPD-E0 600 15 8 1.4 70 TO-252

RJU60C2TDPP-EJ 600 15 8 1.4 70 TO-220FP-2L

RJU60C3SDPD-E0 600 30 15 1.4 90 TO-252

RJU60C3TDPP-EJ 600 30 15 1.4 90 TO-220FP-2L

RJU606TDPP-EJ 600 50 25 1.4 100 TO-220FP-2L

RJU60C6SDPE 600 50 25 1.4 100 LDPAK-S

RJU60C6SDPK-M0 600 50 25 1.4 100 TO-3PSG

Series Part Number Voltage (V) IF @ 25˚C (A) IF@100˚C (A) VF (V) (typ) Trr (typ) (ns) PKG

Low Trr, RJU**5* Series

RJU6052SDPD-E0 600 10 5 2.5 25 TO-252

RJU6052TDPP-EJ 600 10 5 2.5 25 TO220FP-2L

RJU6053TDPP-EJ 600 20 10 2.5 25 TO-220FP-2L

RJU6054TDPP-EJ 600 30 15 2.5 25 TO-220FP-2L

RJU6054SDPK-M0 600 30 15 2.5 25 TO-3PSG


Scan barcode for more information onRenesas Advanced Silicon Power Products

PO

WE

R M

AN

AG

EM

EN

T

SiC Diodes

This product line includes a range of ultra-fast (Trr < 15ns, typical) high-performance SiC-SBDs (Schottky Barrier Diodes) in industry-standard packages for applications that require the highest level of energy efficiency.

Part NumberElectrical characteristics

PackageVAK IF VF typ

T r rtyp

RJS6004TDPN-EJ 600V 10A 1.5V 15ns TO-220-2L

RJS6004TDPP-EJ 600V 10A 1.5V 15ns TO-220FP-2L

RJS6005TDPN-EJ 600V 15A 1.5V 15ns TO-220-2L

RJS6005TDPP-EJ 600V 15A 1.5V 15ns TO-220FP-2L

RJS6004WDPQ-E0 600V 20A/10A 1.5V 15ns TO-247

RJS6004WDPK-00 600V 20A/10A 1.5V 15ns TO-3P

RJS6005WDPQ-E0 600V 30A/15A 1.5V 15ns TO-247

RJS6005WDPK-00 600V 30A/15A 1.5V 15ns TO-3P

* Limited Samples Available upon request, Mass production forecasted by Q2-2013

Scan barcode for more STW88N65M5 information

STW88N65M5 — Best High Voltage Superjunction MOSFET for PFC and Inverter ApplicationsRated at 650V Vds and an Rdson of <29 MoHms, this MOSFET can add efficiency to most power conversion applications.

The STW88N65M5 MDmesh™ V MOSFET features the

industry’s lowest on-state resistance for 600V or 650V devices

in the standard TO-247 package, at 0.029 Ohms. This betters

ST’s previous industry benchmark of 0.038 Ohms set by the

STW77N65M5 MDmesh V device. Record setting MOSFETS

empower application designers to improve energy efficiency by

directly replacing MOSFETS of higher resistance or to use fewer

devices in parallel and so reduce assembly and Bill-Of-Materials

(BOM) costs. This device is a N-channel MDmesh™ V Power

MOSFET based on an innovative proprietary vertical super-

junction technology, which is combined with STMicroelectronics’

well-known PowerMESH™ horizontal layout structure. A further

advantage of ST's MDmesh™ V Power MOSFETs is a cleaner turn-

off waveform, enabling easier gate control and simpler filtering due

to reduced EMI..

FEATURES:

Worldwide best RDS(on) in TO-247

Higher VDSS rating

Higher dv/dt capability

Excellent switching performance

Easy to drive

100% avalanche tested

BENEFITS:

650V BVDSS characterization –VS- 600V BVDSS standard in the Market from competitors

Best RDS(on) of any 650V MOSFETs in IPAK/TO-220/TO247/ Max247 packages

Excellent switching performances

APPLICATIONS:

Power Factor Correction

Inverters for Motor Control, UPS and renewable energy

Low loss line switch or linear regulator at line voltage

ASSOCIATED DEVELOPMENT TOOL :

FOT power systems based on the L6563 Single range input voltage from 185 V to 265 V @ 50/60 Hz line Output voltage 400 V ±5% Inductor saturation protection Optimized EMC input filter (EN55014 and EN55022) Power factor > 0.98 Efficiency higher than 95% THD below 10% starting from 1 kW RoHS compliant

The STEVAL-ISF001V2 demonstration board provides a compact and ready-to-use solution for the implementation of a simple PFC system able to supply loads with a power close to the maximum delivered in the most typical domestic installations.

STEVAL-ISF001V2New 3 kW FOT PFC based on the L6563S and STW88N65M5

PO

WE

R M

AN

AG

EM

EN

T


PO

WE

R S

UP

PL

IES


FEATURES:

Xtreme/PSU Board Features: 115W total output power (+5V @ 10A, +12V @ 5A, and +5V standby @ 1A) and +6V to +36V DC input voltage

Xtreme/PSU-XP Board Features: 160W total output power (+5V @ 10A, +3.3V @10A, +12V @ 5A, -12V @ 1A and +5V standby @ 1A) and +6V to +36V DC input voltage

Xtreme/PSU Isolated Board Features: 195W total output power (+5V @ up to 15A, +3.3V @ up to 20A and +12V @ up to 10A), +9V to +36V DC input voltage, and up to 2.25kV of isolation

Xtreme/PSU-UPS Board Features: SMART battery charging capabilities for uninterrupted power supply, 125W+ total output power (+5V, +12V, -12V, +3.3V and +5 standby)

Expansion: PC/104, PC/104-Plus, PCI-104, PCI/104-Express, PCIe/104

Industrial Temperature: -40ºC to 85ºC (40ºF to 185ºF)

Custom Design Services: Connect Tech will work with you to implement a solution that will meet your needs

Free Technical Support

BENEFITS:

Temperature capabilities to withstand the harshest environments

Oversized MOSFETs for improved thermal performance

PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104 expansion capabilities

Low cost PC/104 form factor power supply solutions to reduce development costs

Modified COTS solutions to meet your unique requirements

APPLICATIONS:

Connect Tech’s power supply solutions are ideal for a broad range of rugged applications including

Military

Industrial

Air and ground vehicles.

Embedded DC/DC Power Supply SolutionsConnect Tech offers embedded PC/104 DC/DC power supply solutions, designed with advanced protection features to withstand the harshest environments. Off-the-shelf and custom solutions are available.

Connect Tech’s Xtreme/PSU, Xtreme/PSU-XP, Xtreme/PSU Isolated and Xtreme/PSU-UPS power all of the PC/104 family expansion buses including PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104. These high efficiency, high powered PC/104 power supplies are available in extended temperature ranges.

Xtreme/PSU supplies 115 Watts of power with +5V, +12V and +5V standby output voltages, while Xtreme/PSU-XP supplies up to 160 Watts of total output power with +3.3V, +5V, +12V, and -12V output voltages, without the need for an external heatsink. Xtreme/PSU Isolated supplies up to 195 Watts of total output power with +3.3V, +5V, and +12V output voltages, and three power series options (LP, SP, HP) for an ideal power solution. SMART battery charging capabilities offered by Xtreme/PSU-UPS enables users to power an embedded system with uninterrupted power while providing additional battery backup functionality. Xtreme/PSU-UPS offers 125+ Watts of total output power with +5V, +12V, -12V, +3.3V and +5 standby output voltages.

Connect Tech’s off-the-shelf and custom power supply solutions are ideal for a broad range of applications.

Scan barcode for more embedded DC/DC power supply information

Embedded Computing Experts

PO

WE

R S

UP

PL

IES


200-1340 Watt AC/DC Modular Power Supply Enables Next Day Custom PowerXgen is a true Plug & Play family of multiple output power supplies. Any one of more than 30 million configurations can be assembled anywhere, in under 5 minutes, from standard off the shelf parts, or have assembled and tested by Nu Horizons.

The Excelsys Xgen power supply is made up of two parts:

the AC/DC front end, (PowerPac) and up to 6 DC output modules

(PowerMods). For increased output current, connect PowerMods

in parallel. For increased voltage, connect PowerMods in series.

User replaceable PowerMods enable instant reconfiguration.

PowerPacs are available with either 4 or 6 output module slots.

From prototype to production, every supply is identical, with proven

high volume high reliability sub-components, fast time to market,

zero NRE and full agency approvals.

Scan barcode for more Xgen power supply information

FEATURES:

Each output individually set by trim pot, trim voltage, or external resistor.

Agency approvals include EN60601-1 3rd edition for medical, along with UL60950 and EN60950

Few electrolytic capacitors (all long life)

Standard options include: Conformal Coating, Low Acoustic Noise, Extra Ruggedization, Connector, Reverse Fan, Cabling and Mounting Options

User friendly interface on each output (PowerMod) includes: Remote Sense, Inhibit/Enable, Vtrim, Itrim and Power Good.

Input voltage 85V to 264VAC at 47 to 63Hz

Up to 12 fully isolated floating outputs.

PowerPac provides: AC Fail, Global Shutdown, 5V Bias Isolated Standby, Fan Fail and OverTemp Alarm

Isolation to 4000VAC input to output and 1500VAC input to chassis.

APPLICATIONS:

Medical Lasers Clinical Diagnostic Equipment Dialysis Equipment Industrial Machines Printing Hi-Rel COTS applications Industrial Lasers Test and Measurement Telecommunications Test Radiological Imaging Skin Treatment Radar Systems Variable Speed Pumps Osmosis Systems

Application Slots 200W 400W 600W 700W 750W 800W 900W 1000W 1200W 1340W

Standard4 Slot XLA XLB XLC XLD

6 Slot XCA XCB XCC XCD XCE

Medical4 Slot XMA XMB XMC XMD

6 Slot XVA XVB XVC XVD XVE

Low Noise Standard4 Slot XKA XKB XKC

6 Slot XQA XQB XQC

Low Noise Medical4 Slot XRA XRB XRC

6 Slot XZA XZB XZC

Ultra Quiet Standard4 Slot XTA XTB

6 Slot XBA XBB XBC

Ultra Quiet Medical4 Slot XNA XNB

6 Slot XWA XWB XWC

Hi-Temp 6 Slot XHA XHB

Hi-Rel COTS 6 Slot XFA XFB XFC

MODELVmin

Vnom Vmax Imax WattsVtrim Vpot

Xg1 1.0 1.5 2.5 3.6 50A 125W

Xg2 1.5 3.2 5.0 6.0 40A 200W

Xg3 4.0 6.0 12.0 15.0 20A 240W

Xg4 8.0 12.0 24.0 30.0 10A 240W

Xg5 8.0 24.0 48.0 58.0 6A 288W

Xg7 5.0 24.0 28.0 5A 120W

Xg8 V1 5.0 24.0 28.0 3A 72W

V2 5.0 24.0 28.0 3A 72W

Design your power supply online - visit www.excelsys.com/online_configurator/configure.cgi

PO

WE

R S

UP

PL

IES

26

Scan barcode for more XL330-54 CS product information


Ultra small, high efficiency dual-output AC-DC power supplyThe XL330-54 CS delivers a power density over 15 watts per cubicinch. With an overall height of 1.35" and a 3" x 5.3" footprint, it is ideally suited for OEMs using the industry standard 1U chassis.

FEATURES:

330 W AC-DCc /3” x 5.3” Footprint

Available model: 54V / 12V

Up to 90% efficiency

High power density: over 15 W/in3

All outputs may be paralleled

Remote on /off

5V standby output (1A)

12V aux output (1A)

Universal AC input

Active PFC (90 – 264 Vac)

Active current sharing for n, n+1

Active inrush current limiter

RoHS compliant

BENEFITS:

High density frees real estate in OEM designs

High MTBF for greater reliability

High effiency means less heat, lower cooling required

Active current sharing allows higher power capacity

Active inrush protection eliminates overcurrent failures

APPLICATIONS:

Telecom

Networking

Test equipment

Gaming systems

Lighting systems

Industrial

N2Power leads the power density race with its high efficiency XL330-54 CS AC-DC dual-output power supply. Our advanced technology yields a very small footprint, reduces wasted power, and offers the highest power density in its class. This efficient design means reduced energy costs, a greater return on your investment, greater reliability and longer product life.

The XL330-54 CS provides up to 90% efficiency. Our unique design reduces energy consumption and generates less wasted heat. It requires little forced air cooling, decreases AC power consumption, increases reliability and economy of operation. Comparisons of efficiencies show that our supplies can reduce losses up to 25%.

The main output is enabled whenever all of the required startup conditions are met, and is shut down upon command, loss of input power or whenever excessive loads or temperatures are sensed. When AC input power is lost it provides the host system with advanced warning of an impending shutdown.

TYPICAL MECHANICAL DRAWING:Inches (millimeters)

Screws shown for reference onlyLock washer

Printed Circuit Board

5.30(134.6)

4.55(115.6)

2.55(64.8)

3.00(76.2)

1.35(34.3)

1.10(27.9)

0.06(1.5)

0.19(4.8)

XL330-54 CSHeight = 1.35 (34.3)

Safety ground connection pointat plated through hole

.375(9.53)

.225(5.71)

J2

J4

J3

Pin 1Pin 1

Pin 1J1

Pin 1

Safety ground connection pointat plated through hole

27

RemembeR cRaftsmanship?

We do.

Dazzling display visuals are just the beginning. What’s on the inside is just as important.

Our LCD materials are of the highest quality, including glass from Sharp’s own Fabs. Our displays are built with durable construction to perform in environments from factories to physician’s offices.

Plus, our engineers live and breathe the development of Industrial Strength technology, just like yours do. So, you can rest assured that every Sharp LCD is built with pride. We won’t settle for less...and our customers can’t settle for less.

www.SharpSMA.com

100 Years strong In 2012, Sharp celebrates a century of doing business. Here’s to the next 100 years.

Boar

d Le

vel D

C-DC

Con

vert

ers:

Pow

er S

uppl

ies

/ Mod

ules

Inpu

t Vol

tage

Outp

ut V

olta

geAm

ps/W

atts

Size

(mm

)Is

olat

ed

Emer

son

AI

F04Z

PFC

85-2

64V

0-38

0V4.

2A4.

6”x2

.4”x

0.5”

No

AI

Q00Z

PFC

100-

122V

0-39

3V0.

3A2.

3”x1

.45”

x0.5

”No

AI

T02Z

PFC

85-2

64V

393V

2.1A

3.5”

x2.4

”x0.

55”

No

AE

R03

4.5-

5.5V

3.3V

3A1”

x1”

Yes

AE

E/BX

/CX/

SX9-

75V

-15

V to

+ 1

5V2A

- 6

A1”

x2”

Yes

AS

A/BX

A18

-75V

-15

V to

+15

V0.

6A -

3A

1.25

”x0.

8”Ye

s

AE

T/AL

T/CX

A18

-75V

-15

V to

+15

V6V

- 8

A2”

x1.6

”Ye

s

BX

A40

18-7

5V2.

9V-1

2V8A

2.2”

x2.2

”Ye

s

AU

36-

75V

1.2

V-5V

11A

1.47

”x1.

07”x

0.17

” to

1.7

7”x1

.77”

x0.1

7”Ye

s

AU

M 3

6-60

V1.

5V-5

V3A

1.39

”x0.

92”x

0.3”

Yes

AV

4.5-

5.5V

1V-3

.3V

6A1.

33”x

0.61

”x0.

24”

No

LG

A3-

14V

0.59

V-5.

1V20

A0.

64”x

0.64

”x0.

21”

No

AI

F25

0V-4

20V

1.8V

-48V

120A

Full

Bric

kNo

AI

H25

0V-4

20V

1.8V

-24V

50A

1/2

Bric

kNo

AI

Q25

0V-4

20V

28V

2.32

A1/

4 Br

ick

No

M

TC 9

0-26

4V 3

.16-

12.9

5V50

A7.

37”x

2.34

”x2.

89”

No

Line

age

Pow

er

St

ingr

ay36

-75V

3.3,

5, 1

5V25

A1/

8 Br

ick

Yes

Ha

mm

erhe

ad18

-75V

3.3,

5, 1

2V6-

20A

57.9

x 2

2.6

x 7.

6Ye

s

Ba

racu

da36

-75V

12V

20-3

3A1/

8 an

d 1/

4 Br

ick

Yes

Or

ca36

-75V

28, 3

2V16

A1/

2 Br

ick

Yes

DL

ynx

3-14

.4V

0.45

-5.5

V3-

40A

12.2

x 1

2.2

x 8.

5 to

33.

02 x

13.

46 x

10.

9No

Pr

oLyn

x9-

36V

3-18

V1.

5-5A

20.3

x 1

1.4

x 8.

5 No

TL

ynx

2.4-

16V

0.59

-8V

50A

12.2

x 1

2.2

x 6.

25 to

33

x 22

.9 x

10

No

Na

os R

apto

r3V

-14V

.59-

6V60

A10

.4 x

16.

5 x

7.84

to

65.5

x 3

1.8

x 11

.6

No

Line

ar T

echn

olog

y

uM

odul

e1.

5V -

72V

0.6V

- 3

4V30

A6

x 6

x 2.

32 to

15

x 15

x 4

.32

No

28

Boar

d Le

vel D

C-DC

Con

vert

ers:

Pow

er S

uppl

ies

/ Mod

ules

Inpu

t Vol

tage

Outp

ut V

olta

geAm

ps/W

atts

Size

(mm

)Is

olat

ed

LHV

Pow

er

D-

Serie

s11

V-32

V50

0- 7

KV1.

4mA

- 20

mA/

10W

4.06

2inx

1in

x 2.

062i

nNo

E-

Serie

s11

.5 to

32V

DC50

0-3K

V1.

6mA

- 10

mA/

5W

2.25

0in

x 2i

n x

1.05

inNo

PP

M-S

erie

s14

-27V

1KV-

1.4K

V0.

7mA-

2mA/

3W

3.03

in x

2.1

2in

x 0.

9in

No

A-

Serie

s5-

14V

1KV-

4KV

3W1.

5in

x 2.

5in

x 0.

75in

Yes

GM

A-Se

ries

12/2

4V10

0V-

3KV

1.5W

1.49

in x

1.4

1in

x 0.

078i

nYe

s

Mea

n W

ell

Mod

ule

9-75

V5,

12,1

5, 2

4V50

mA-

15A

/0.5

W-

150W

1in

x 1

in to

1/2

Bric

kYe

s

On

Boar

d9.

2-72

V5,

12,1

5, 2

4V0.

33-4

A/5W

-60W

1.6i

n x

1in

x 0.

327i

n to

2in

x 1

.024

in x

0.4

21in

Yes

PCB

9.2-

72V

5,12

,24V

0.25

-9A/

5W

-45W

75x

40

x20

to 1

27x

76x

30Ye

s

Enc

lose

d9.

2-14

3V5,

12,2

4, 4

8V0.

625-

60A

/15W

-100

0W 7

8x 5

1x 2

8 to

295

x 12

7x 4

1Ye

s

Mur

ata

Pow

er S

olut

ions

Lo

w P

rofil

e- Is

olat

ed18

-75V

1.5-

5V5-

100W

/0.8

-20A

27 x

14.

6mm

to 4

5 x

45m

mYe

s

Qu

arte

r Bric

k- Is

olat

ed36

-75V

1.8-

5V50

W/1

.8-1

0A1/

4 Br

ick

Yes

Si

xtee

nth

Bric

k- Is

olat

ed36

-75V

3.3V

50W

/15A

33.0

x22.

7mm

Yes

DO

SA-

Non-

Isol

ated

3-20

V0.

59-1

2V4.

5-12

0W/.5

-26A

11x8

.5m

m to

40x

40.3

mm

No

1U

Fro

nt E

nd40

-72V

12,5

4V69

.2A,

6A/

400W

-210

0W1U

Yes

PO

L Al

lianc

e2.

95-1

3.2V

0.55

-5.5

V18

-99W

/10-

50A

25.2

7x15

.75m

m to

51.

94x2

6.54

mm

No

Rene

sas

Sw

itchi

ng40

V40

VNA

DIP,

SOP

Yes

Synq

or

Po

wer

Qor

18V

- 75

V1.

8, 3

.3,5

,12,

15,2

8V10

0W -

728

WFr

om 1

/8 b

rick

to fu

ll br

ick

Yes

CF

Qor

9-75

V5-

24V

105W

-150

W1/

4 br

ick

Yes

In

Qor

9-42

5V1.

2-48

V53

W-6

00W

1/4

bric

k an

d 1/

2 br

ick

Yes

Ni

Qor

3-16

V0.

75-3

.6V

58W

-120

W15

x 5

0 x

7.32

No

Ni

Qor (

High

Vol

tage

)9-

90V

0-90

V16

00W

1/8

bric

k to

1/2

bric

kNo

Bu

sQor

35-7

5V9.

6-12

V33

1W-6

00W

From

1/8

bric

k to

1/2

bric

kYe

s

29

Syst

em P

ower

: AC

to D

C Su

pplie

s

Fron

t End

/ Rec

tifier

Pow

er S

helv

esCo

mpa

ct P

CI

Inpu

t Vol

tage

Outp

ut V

olta

geW

atts

/Pro

file

Wat

tsBa

ysW

atts

/Pro

file

Emer

son

L

85 V

to 2

64 V

-

15V

to 5

4V40

W to

350

W

N

85 V

to 2

64 V

-

15V

to 5

4V25

W to

500

W

T

85 V

to 2

64 V

12

V to

48

V 15

0 W

AI

Q85

V to

264

V

0 to

380

V

1,60

0 W

AI

T85

V to

264

V

393V

150

W to

720

W

AI

F10

0 V

to 1

22 V

39

3 V

75 W

uM

P85

- 2

64 V

ac, 1

20 -

350

Vdc

0.9V

to 5

4.0V

400W

to 1

200W

M

P85

- 2

64 V

ac, 1

20 -

350

Vdc

2V to

60V

36W

to 6

00W

iM

P85

- 2

64 V

ac, 1

20 -

350

Vdc

2V to

60V

36 W

- 1

.5 k

W

VS

85-2

64 V

AC, 1

80-2

64 V

AC2V

to 4

8V25

0W -

150

0W

iV

S90

- 2

64 V

ac; 1

20 -

300

Vd

c, 1

70 -

264

Vac

, 480

Vac

no

min

al, 3

80 V

ac n

omin

al2v

- 6

0v36

W -

1.5

kW

Exce

lsys

XL

/XC

85V-

380

V1V

to 5

8V20

0W-1

340W

XM

/XV

85V-

380

V1V

to 5

8V20

0W-1

340W

XK

/XQ

85V-

380

V1V

to 5

8V20

0W-1

200W

XR

/XZ

85V-

380

V1V

to 5

8V20

0W-1

200W

XT

/XB

85V-

380

V1V

to 5

8V20

0W-8

00W

XN

/XW

85V-

380

V1V

to 5

8V20

0W-8

00W

XH

85V-

380

V1V

to 5

8V40

0W-6

00W

LHV

Pow

er

Hi

-Fle

x M

odul

ar P

ower

90-2

64VA

C1.

5V -

60V

1000

W/ 8

x5x2

.5in

Op

en F

ram

e90

-264

VAC

5V -

54V

40W

- 8

00W

/7.8

7x4.

13x2

.20i

n

U

Fram

e90

-264

VAC

2V -

58V

150W

- 8

00W

/8x5

x1.6

0in

En

clos

ed90

-264

VAC

2V -

60V

150W

- 8

00W

/8x4

x2in

PH

220

Serie

s90

-264

VAC

100V

-5KV

200W

/ 3u

LH

V Se

ries

90-2

64VA

C1K

V -

30KV

45-6

0W/ 9

.73x

7.42

x2.1

25in

30

Syst

em P

ower

: AC

to D

C Su

pplie

s

Fron

t End

/ Rec

tifier

Pow

er S

helv

esCo

mpa

ct P

CI

Inpu

t Vol

tage

Outp

ut V

olta

geW

atts

/Pro

file

Wat

tsBa

ysW

atts

/Pro

file

Line

age

Pow

er

CA

R12V

85-2

64VA

C12

V85

0 -

2500

W /

1u

CA

R24/

48V

85-2

64VA

C24

V- 4

8V12

00W

/ 1u

- 4

000W

/ 3u

Ep

xx R

ectifi

er85

-264

VAC

(-54

V)80

0W /

1u

CP

xx R

ectifi

er85

-305

VAC

(-54

V)27

25W

/ 1u

CA

Rxx

Rect

ifier

85-

264V

AC27

V, (-

54V)

1200

W/1

u -

400

0W/3

u

Op

en F

ram

e90

-264

VAC

3.3,

5.1

, 12,

15V

75W

-200

W/1

u

SP

S Pl

atfo

rm80

0-10

00W

2-3

Bays

AC

E12

00-4

000W

3-5

Bays

CP

L Pl

atfo

rm20

00 -

272

5W3-

4 Ba

ys

CM

Pxx

PCI

150/

3u -

400

/6u

DM

Pxx

PCI

150/

3u -

400

/6u

Mea

n W

ell

En

clos

ed90

- 37

0V12

, 24,

48V

15W

- 3

KW/ 2

95x1

27x4

1mm

LE

D90

- 30

5V12

- 54

V40

W -

320

W/

256x

90x4

3.8m

m

Op

en F

ram

e90

- 3

70V

+-

5, 1

2, 1

5V5W

- 2

50W

/ 177

.8x1

07.9

5x38

mm

M

odul

ar85

- 3

70V

1.6V

- 5

3V45

0W -

1KW

/ 254

x127

x63.

5mm

Mur

ata

Pow

er S

olut

ions

D1

U4CS

90-2

64 V

AC12

V, 3

.3/5

Vsb

2200

W/1

u

D1

U-H

170-

264

VAC

-52

V, 1

2Vsb

2800

W/1

u

C1

U-W

90-2

64 V

AC 1

2V/4

8V, 3

.3Vs

b12

00W

/1u

D1

U490

-264

VAC

12V

, 3.3

/5/1

2Vsb

1200

- 1

600W

/1u

CE

F400

85-2

64 V

AC12

V, 5

Vsb

400W

/1u

cP

CI20

0A20

0/3u

cP

CI20

0D20

0/3u

cP

CI32

5D32

5/3u

cP

CI35

0DC

350/

6u

cP

CI42

0DC

420/

6u

cP

CI50

0DC

500/

6u

S1

U Sh

elf

3600

-120

00W

3 Ba

ys

31

Syst

em P

ower

: AC

to D

C Su

pplie

s

Fron

t End

/ Rec

tifier

Pow

er S

helv

esCo

mpa

ct P

CI

Inpu

t Vol

tage

Outp

ut V

olta

geW

atts

/Pro

file

Wat

tsBa

ysW

atts

/Pro

file

N2Po

wer

XL

AC-

DC S

erie

s12

V-56

VAC

12V-

56V,

5Vs

b37

5W/1

u

AT

X AC

-DC

Serie

s10

0V-2

40VA

C2.

5V -

24V

, 5Vs

b28

5W/1

u-2u

ST SP

AC A

C-DC

85V-

264V

5V, 1

5V8W

-100

W/3

5x20

x22m

m

Synq

or

AC

uQor

E-S

erie

s85

-264

V12

-48V

800

-140

0W /

AC

uQor

G-S

erie

s85

-264

V12

-48V

300

- 70

0W /

M

ultiQ

or E

-Ser

ies

85-2

64V

12-4

8V30

0 -

700W

/

Zipp

y

Op

en F

ram

e90

- 2

64VA

C, 1

0 -

36 V

DC -

12, -

5, 3

.3, 5

, 12,

24V

35-2

00W

Si

ngle

90-2

65VA

C, -

18 to

-56

VDC

-12

, -5,

3.3

, 5, 1

2, 4

8V12

0-95

0W

Re

dund

ant

90-2

64VA

C, -

36 to

-72

VDC

-12

, -5,

3.3

, 5, 1

2V12

0-12

00W

Syst

em P

ower

: AC

to D

C Co

nver

ters

Inpu

t Vol

tage

VDSS

(Ran

ge)

Pack

age

Pow

er 2

30V

(W)

Pow

er W

ide

(W)

Feat

ures

Alle

gro-

San

ken

ST

R-A

85-2

65V

650-

800V

DIP8

8 to

24

5 to

20

PWM

Offl

ine

Switc

hing

ST

R-W

85-2

65V

650V

TO-2

2045

to 9

030

to 6

0PW

M O

fflin

e Sw

itchi

ng

ST

R-A

85-2

65V

500-

800V

DIP8

8 to

22

5 to

18

Puls

e Ra

tio C

ontro

l

ST

R-Y

85-2

65V

500-

800V

TO-2

20F-

7L80

to 1

4060

to 8

0Qu

asi-R

eson

ant

ST

R-W

85-2

65V

500-

800V

TO-2

2011

0 to

240

50 to

140

Quas

i-Res

onan

t

ST

R-X

85-2

65V

450-

800V

TO-3

P31

0 to

460

165

to 2

50Qu

asi-R

eson

ant

ST VI

Per

85-2

65V

up to

620

VDI

P8, P

Ower

SO-1

065

4020

02/9

5/EC

Eur

opea

n Co

mpl

ianc

e

AL

TAIR

85-4

40V

up to

900

VSO

16N

NANA

Over

Cur

rent

Pro

tect

ion

sb: S

tand

by O

utpu

t

32

Digi

tal P

ower

Man

agem

ent a

nd S

uppo

rt D

evic

es

Inte

grat

ed P

ower

Man

agem

ent

Inte

grat

ed S

yste

m S

uper

viso

r

Batte

ry

Char

gers

Batte

ry

Man

agem

ent

LED

Driv

erHo

t Sw

apPO

EPr

ogra

mm

able

PoR

WDT

Volta

ge

Mon

itor

Star

t Del

ayPM

Bus

Alle

gro

Mic

rosy

stem

s

Exar

Latti

ce

Line

ar T

echo

nolo

gy

Mic

rel

Rene

sas

ST

Supe

rtex

33

POL

Pow

er: D

iscr

ete

DC-D

C Re

gula

tors

and

Mod

ules

; AC

-DC

PFC

Cont

rolle

rsM

in V

inM

ax V

inM

in V

out

Max

Vou

tM

ax Io

utFe

atur

es

Alle

gro

Mic

rosy

stem

s

LD

O4.

5V-

9V23

V- 5

0V0.

8V24

V7A

Mul

tiple

adj

usta

ble

regu

lato

rs, I

nteg

rate

d PO

R an

d W

DT, O

ut o

f Pha

se s

witc

hing

, Fau

lt fla

g

Sw

itchi

ng2.

5V10

V36

V36

V15

mA

OLED

dis

play

bia

s su

pply

; WLE

D ba

cklig

ht

Alle

gro-

San

ken

Sw

itchi

ng3.

5V53

V0.

5V25

-53V

8ASo

ft st

art;

Outp

ut o

n/of

f; Ov

er c

urre

nt, o

ver t

empe

ratu

re, U

VLO

prot

ectio

n;

M

ulti-

Outp

ut S

witc

hing

4V38

V1V

24V

1.5A

Curr

ent l

imiti

ng; S

oft s

tart;

Rem

ote

volta

ge s

ensi

ng; A

djus

tabl

e ou

tput

vol

tage

;

Li

near

Var

iabl

e10

V35

V1V

16V

3AFa

st T

rans

ient

Res

pons

e, R

emot

e Vo

ltage

Sen

sing

, Gro

und

Tab,

Fol

dbac

k Cu

rren

t Lim

iting

Li

near

Fix

ed10

V35

V1.

8V5V

3AFa

st T

rans

ient

Res

pons

e, R

emot

e Vo

ltage

Sen

sing

, Gro

und

Tab,

Fol

dbac

k Cu

rren

t Lim

iting

PF

C Co

rrec

tion

Stan

dard

AC

Volta

ge in

put

1.5V

390V

Sele

ctab

leSo

ft st

art,

OVP,

OCP,

Open

Loo

p De

tect

ion,

Ope

n Te

rmin

al P

rote

ctio

n

Emer

son

LD

O- C

cla

ss3

V13

.8 V

0.

59 V

5.1

V 3

A to

10

AW

ide

outp

ut tr

im, r

emot

e on

/off,

cur

rent

sin

k fo

r ter

min

atio

n ap

plic

atio

ns

LG

A- C

cla

ss3

V14

V0.

59 V

5.1

V 3

A to

20

AIn

put U

LOV,

Een

able

, out

put a

djus

t, di

ffere

ntia

l rem

ote

sens

e, m

argi

ning

, pow

er g

ood

SI

L- C

Cla

ss4.

5 V

13.8

V

-5V

5.1

V 6

A to

40

AFi

xed

frequ

ency

sw

itchi

ng, o

utpu

t trim

, ena

ble,

pow

er g

ood

SM

T- C

Cla

ss4.

5 V

13.8

V

0.59

V5.

1 V

6 A

to 4

0 A

Outp

ut v

olta

ge a

djus

t, en

able

AP

- E

Clas

s3

V14

V0.

75 V

5.5

V18

AIn

put U

LOV,

ena

ble,

rem

ote

sens

ing,

out

put t

rim

SI

L- E

Cla

ss0.

8 V

14 V

0.75

V3.

63 V

5

A to

30

AUl

tra h

igh

effic

ienc

y (9

3%),

extre

mel

y lo

w in

tern

al p

ower

dis

sipa

tion

SM

T- E

Cla

ss3

V14

V0.

75 V

3.63

V

5 A

to 1

5 A

Ultra

hig

h ef

ficie

ncy

(94%

), ex

trem

ely

low

inte

rnal

pow

er d

issi

patio

n, M

TBF

6.9M

hrs

SI

L- F

Cla

ss3

V13

.2 V

0.9

V3.

3 V

12 A

to 1

5 A

Extre

mel

y lo

w in

tern

al p

ower

dis

sipa

tion,

min

imal

ther

mal

des

ign

conc

erns

SM

T- F

Cla

ss3

V13

.2 V

0.9

V3.

3 V

12 A

to 1

5 A

Ultra

fast

tran

sien

t res

pons

e, e

xtre

mel

y lo

w in

tern

al p

ower

dis

sipa

tion

DD

R10

.8 V

13.2

V1.

3 V

2.5

V8A

Pow

er g

ood,

ove

rvol

tage

pro

tect

ion,

ove

r cur

rent

pro

tect

ion,

rem

ote

on/o

ff

PT

H3V

13.2

V0.

8V5.

5V60

APi

n co

mpa

tible

with

oth

er P

OL A

llian

ce m

embe

rs, p

ower

seq

uenc

ing,

and

vol

tage

mar

gini

ng

PT

V3V

13.2

V0.

8V2.

5V18

APi

n co

mpa

tible

with

oth

er P

OL A

llian

ce m

embe

rs, p

ower

seq

uenc

ing,

and

vol

tage

mar

gini

ng

Exar

LD

O1.

8V -

4.1

V5.

5V -

30V

1.2V

5V5A

Soft

star

t; En

able

; The

rmal

, Ove

r cur

rent

and

Ove

r vol

tage

pro

tect

ion;

Po

wer

Blox

2.5

- 4.

75V

18-2

9V0.

6-.9

25V

16-2

8V12

ASo

ft st

art;

Enab

le; T

herm

al, O

ver c

urre

nt a

nd O

ver v

olta

ge p

rote

ctio

n;

Co

ntro

llers

(Ste

p Do

wn)

1-5V

5.5-

29V

.5-1

.3V

5-24

V1.

5ASo

ft st

art;

UVLO

det

ects

bot

h VC

C an

d VI

N; S

hort

circ

uit p

rote

ctio

n w

ith a

uto-

rest

art;

Pr

ogra

mm

able

Pow

er4.

75V

- 6.

5V20

-25V

0.9V

5.1V

NAIn

depe

nden

t sta

rt-up

del

ays;

Ove

r tem

p, o

ver c

urre

nt, u

nder

cur

rent

pro

tect

ion

Sw

itchi

ng (S

tep

Dow

n)2.

6-3V

5.5-

36V

.6-1

.3V

5-6V

.4-1

.5A

Unde

r vol

tage

lock

out

; Shu

tdow

n co

ntro

l; 3V

bat

tery

low

indi

cato

r;

Sw

itchi

ng (S

tep

up)

.7-3

V3.

3-36

V3

- -5

.55.

5- -

18.1

-.4A

Logi

c sh

utdo

wn

cont

rol;

Unde

r vol

tage

lock

out

; Pro

gram

mab

le lo

w b

atte

ry d

etec

t;

34

POL

Pow

er: D

iscr

ete

DC-D

C Re

gula

tors

and

Mod

ules

; AC

-DC

PFC

Cont

rolle

rsM

in V

inM

ax V

inM

in V

out

Max

Vou

tM

ax Io

utFe

atur

es

Line

age

DL

ynx

3V14

.4V

0.45

V5.

5V40

APM

Bus;

Ove

r cur

rent

pro

tect

ion;

Rem

ote

On/O

ff; O

ver T

empe

ratu

re p

rote

ctio

n

Pr

oLyn

x9V

36V

3V18

V5A

Prog

ram

mab

le o

utpu

t vol

tage

; Ove

r cur

rent

/tem

pera

ture

lim

it; R

emot

e en

able

TL

ynx

2.4V

16V

0.59

V8V

50A

Flex

ible

out

put v

olta

ge s

eque

nce;

Ove

r cur

rent

/ther

mal

pro

tect

ion;

Rem

ote

On/O

ff

Na

os R

apto

r3V

14

V0.

59V

6V60

APr

ogra

mm

able

out

put v

olta

ge; O

ver c

urre

nt/te

mpe

ratu

re li

mit;

Rem

ote

enab

le

Line

ar T

echo

nolo

gy

LD

O -

4.3V

- 6

V -

35V

- 80

V -

3.8V

60V

10A

Mul

tiple

out

puts

; Adj

usta

ble

outp

ut v

olta

ge; C

urre

nt li

mit

prot

ectio

n; R

ever

se-b

atte

ry

prot

ectio

n; T

herm

al li

mit

prot

ectio

n

Sw

itchi

ng0.

02V

- 18

V0.

5V -

100

V -

20V

350V

240A

Mul

tiple

out

puts

; Mul

ti-ph

ase

oper

atio

n; C

ontin

uous

, pul

se-s

kipp

ing

or b

urst

mod

e op

erat

ion;

Adj

usta

ble

soft

star

t vol

tage

Ch

arge

Pum

p1.

5V-

5V4V

-32V

-5V

5.

1V1A

Low

noi

se; L

ED d

river

; Spr

ead

spec

trum

; SD

disc

onne

ct; M

ultip

le o

utpu

ts

M

odul

e (u

Mod

ule)

1.5V

- 6V

5.5V

- 7

2V0.

6V34

V30

ASo

ft st

art;

Low

EM

I; Po

lyph

ase;

Pow

er g

ood;

Out

put d

isco

nnec

t; M

argi

ning

; Ext

erna

l sy

nchr

oniz

atio

n

Mar

vel

PF

C Co

ntro

ller-

Boo

st/F

lyba

ckSt

anda

rd A

C Vo

ltage

inpu

t2V

18V

2APo

wer

Fac

tor C

orre

ctio

n co

ntro

ller w

ith 0

.99

pow

er fa

ctor

; UVL

O, O

VP, T

herm

al s

hutd

own;

Ad

aptiv

e co

ntro

l loo

p fo

r wid

e op

erat

ing

rang

e; L

ow h

arm

onic

dis

torti

on

Si

ngle

Out

put R

egul

ator

s2.

7-3V

5.5V

0.72

V3.

63V

2A-5

ASi

ngle

or m

ultip

le o

utpu

ts; 9

5% e

ffici

ency

; Sin

gle

resi

stor

out

put p

rogr

amm

ing;

Inte

rnal

fre

quen

cy c

ompe

nsat

ion;

Min

imal

ext

erna

l com

pone

nts

M

ultip

le O

utpu

t Reg

ulat

ors

2.75

-3V

5.5V

0.72

V3.

63V

1-3A

Sing

le o

r mul

tiple

out

puts

; 95%

effi

cien

cy; S

ingl

e re

sist

or o

utpu

t pro

gram

min

g; In

tern

al

frequ

ency

com

pens

atio

n; M

inim

al e

xter

nal c

ompo

nent

s

Hi

gh V

olta

ge C

onve

rters

4.5-

4.75

V15

.7-1

6V.9

V5.

5V3-

5ASi

ngle

or m

ultip

le o

utpu

ts; 9

5% e

ffici

ency

; Sin

gle

resi

stor

out

put p

rogr

amm

ing;

Inte

rnal

fre

quen

cy c

ompe

nsat

ion;

Min

imal

ext

erna

l com

pone

nts

Mic

rel

LD

O1.

65V-

3V

5.5V

- 3

6V0.

9V5.

1V7.

5ACu

rren

t and

The

rmal

lim

iting

; Err

or fl

ag o

n dr

opou

t; Lo

gic

cont

rolle

d sh

utdo

wn;

Pr

ogra

mm

able

out

put;

Hi

gh S

ide

Pow

er S

witc

hers

1.75

V5.

5VNA

NA2A

Soft

star

t, lo

ad d

isch

arge

, ena

ble

inpu

t

Rene

sas

PFC

Con

trolle

r24

V24

V11

.9V

390V

NAPo

wer

goo

d, p

rote

ctio

n, h

igh

effic

ienc

y

Sw

itchi

ng0.

9V -

8.6

V4.

5V -

40V

0.9V

40V

1ACu

rren

t lim

iter;

Mul

tiple

out

puts

; Ove

rcur

rent

det

ectio

n; U

nder

vol

tage

lock

out;

Enab

le

ST Sw

itchi

ng9V

- 28

V46

V5.

1V24

V4A

Embe

dded

hea

t sin

k; E

nabl

e; O

utpu

t cur

rent

ove

rload

pro

tect

ion;

Out

put o

verv

olta

ge

prot

ectio

n;

PFC

Con

trolle

rSt

anda

rd A

C Vo

ltage

10

V22

V40

0W R

emot

e On

/Off,

Ove

rvol

tage

Pro

tect

ion,

Lat

ched

Shu

tdow

n, T

rack

ing

Boos

t Fun

ctio

n

35

Samsung + LED Lighting + Nu Horizons =

Innovative Lighting Solutions

LED Lighting Solutionsfrom

Samsung is committed to leading the LED lighting revolution, and Nu Horizons is committed to delivering the right solution to meet your LED project needs.

Mid-power white LEDs

High-power white LEDs

High-voltage white AC LEDs

High-voltage white DC LEDs

Light Engines and Modules

LED Tube

Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting or scan the

QR code below with your smart phone.

Design Custom LED Assembly

Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting

or scan the QR code below with your smart phone.

Lighting Technologies available from Nu Horizons

37

LEDs Samsung LED Sharp

Optics Ledil

Light Engines OptoElectronix Samsung LED

Thermal Management LED Specialists OptoElectronix

LED Drivers Allegro Atmel ERG Exar IXYS ISSI Linear Technology Marvell Micrel MicroSemi ST Supertex Telefunken

Power Solutions Excelsys GE Energy LHV Power Mean Well N2Power

System Design Nu Horizons LED Lighting Solutions

LED Components: ■ Low power ■ Mid power ■ High power ■ HV AC ■ HV DC ■ Flash LED

Optics: ■ Lenses ■ Reflectors ■ Standard products ■ Custom solutions ■ Development & deployment of new fixtures

Light Engines: ■ LED street light ■ LED down light ■ LED area light ■ LED light strip

Thermal Management: ■ Thermal testing ■ Thermal management

LED Drivers ■ Inductorless white LED drivers (for LEDs in parallel) ■ Switching regulator based white LED drivers (for LEDs in series) ■ Integrated Schottky diodes ■ Accurate LED current matching ■ Multiple output capability ■ Topologies - Constant current source - Dimmable current source - Flyback - Boost (step-up) - Buck (Step Down) - LLC resonant topologies - SEPIC topology

Power Solutions ■ Fully assembled and tested power solution ■ Ruggedized products ■ End to end solutions - AC/DC - DC/DC ■ 6W to 320W ■ Norms - UL1310 Class 2, UL8750, EN61347-2-13, EN61000-3-2 Class C (harmonic current) and IP64~67

System Design ■ Nu Horizons LED Lighting Solutions - One stop solution for all your solid state lighting needs - Design - Custom LED - Assembly

Display Technologies available from Nu Horizons

38

Cable Solutions Quadrangle

Displays Emerging Display Technologies (EDT) Intouch Electronics LG Display NLT Technologies Optrex OSD Displays Pervasive Display Pixel Qi Sharp Tianma

Embedded Solutions / Single Board Computers Aaeon Amulet Technologies Axiom Tek Connect Tech Digi International IEI Technology Reach Technology

Inverters Applied Concepts ERG Microsemi

LCD Controller Solutions Amulet Technologies Digital View Estecom-USA Kordis URT

LCD Monitors Axiom Tek Estecom-USA IEI LG Display Touch Revolution

Open Frame/Panel PC Solutions Aaeon Axiom Tek Estecom-USA IEI Technology Landmark Nu Horizons Custom Solutions Touch Revolution Touchscreens Hantouch Touch International Touch Revolution

Active Enhancements: ■ Hi Bright Backlights: - CCFL - LED

Design Services: ■ System Hardware & Compatibility ■ ProductSpecification ■ Custom Test Set-up ■ POC / Prototype ■ First Article ■ Revision Control (ECN) ■ Engineering Evaluation ■ Problem Resolution

Display Technologies: ■ LCD - Active, Passive - Graphic - Color, Monochrome - Character - 3D ■ EPD - e-Paper, e-Ink ■ OLED - Organic Light Emitting Diode ■ PID - Public Information Display, Signage

Passive Enhancements: ■ Anti-ReflectiveAntiGlareGlass/Acrylic ■ EMI/RFI Shielding ■ IR Blocking Film ■ Optical Bonding ■ Privacy Filters ■ Protective Display Shields

Total Solutions: ■ DisplayKitVerification ■ Fully Enclosed LCD Monitors ■ Fully Enclosed LCD Systems (Panel PC’s) ■ LCD Testing and Screening ■ Medical ■ NEMA Rated Products ■ OpenFrameConfigurations ■ Rack and Panel Mount Assemblies

Touch Screen Integration: ■ Capacitive ■ Surface Acoustic Wave (SAW) ■ IR - Infrared Touch ■ Projected Capacitive - Extreme-Touch ■ Resistive - 4/5/8 Wire ■ Touch Controllers / Serial USB

Value-Add Capabilities: ■ Class 1,000 Clean Room for all LCD Enhancements ■ Display Inspection ■ NVIS Night Vision ■ Optical Glass Bonding ■ Touch Screen Integration ■ Functional Testing: - Power Cycling - Elevated Temperature Test - Video Testing / Calibration - Flat Panel - Pixel Screen - Extended Burn-in - Custom Test Creation / Execution - Touch Screen Calibration

T E C H N O L O G Y I N C .

w w w . n u h o r i z o n s . c o m / d i s p l a y s

Cable Solutions Quadrangle

Displays Emerging Display Technologies (EDT) Intouch Electronics LG Display NLT Technologies Optrex OSD Displays Pervasive Display Pixel Qi Sharp Tianma

Embedded Solutions / Single Board Computers Aaeon Amulet Technologies Axiom Tek Connect Tech Digi International IEI Technology Reach Technology

Inverters Applied Concepts ERG Microsemi

LCD Controller Solutions Amulet Technologies Digital View Estecom-USA Kordis URT

LCD Monitors Axiom Tek Estecom-USA IEI LG Display Touch Revolution

Open Frame/Panel PC Solutions Aaeon Axiom Tek Estecom-USA IEI Technology Landmark Nu Horizons Custom Solutions Touch Revolution Touchscreens Hantouch Touch International Touch Revolution

w w w . n u h o r i z o n s . c o m / d i s p l a y s

Embedded Solutions / Single Board Computers available from Nu Horizons

Offering Embedded Computing Platforms so that

customers have a single, reliable, cost-effective source

to a wide array of CE, FCC & UL certified products.

These products include single board computers,

embedded systems and barebone systems, panel

computers, medical PC, human machine interfaces, and

network security appliances.

T E C H N O L O G Y I N C .

Supported Markets Medical

Military

Heavy Industrial

Consumer

Gaming & Entertainment

Point of Sale

Telecom

Supported Processors Intel

VIA

Xscale

Marvell

AMD

System on Module ■ETX

■STX

■Q7

■COM EXPRESS

■XTX

■SOM Baseboards

Industrial Motherboards ■Mini ITX

■Micro ATX

■ATX

Embedded SBC ■Pico ITX

■3.5” Capa Boards

■EPIC

■5.25 Boards

■RISC CPU Modules

■PC104

Servers Sun Micro

Super Micro

IBM

Panel PC/POS Solutions ■Medical Grade Touchscreen Computers

■Industrial Monitors

■Digital Signage

■Video Wall Controllers

■Heavy Industrial Monitors

■Rack Consol

■RISC Based monitor

Peripherals ■Memory (Flash, DDR, DDR2, DDR3)

■Heatsink/Fan Assemblies

■MiniPCI Module

■SA/PCI/PCI-X riser cards

■I/O cables

■LCD wiring kits

■Compact Flash

■HDD Drives

Add on Cards ■LCD converter

■FPGA

■Video Capture

■PCI-Express cards

■PC104 I/O Modules

■Wireless

■RFID

■Wireless Radio Modems

■CAN Controllers

Chassis ■1U to 6U

■Shoe Box

■Rackmount

■Compact

■Embedded

Power Solutions ■DC/DC

■Open Frame

■1U/2U Power supply

■UPS Module

■AC/DC

Software Microsoft, Linux Support

Technical Resources / Customization Resources ■Sheet Metail

■Industrial Design

■Silk Screening

■Custom Enclosures

39

40

AMERICAS SUPPLIER LISTING

EEmbedded Single Board Computers, Panel Appliance & Automation Solutions, Industrial System Solutions

SDigital Audio, Video, Sensor Products, Communications, Clock Devices, Power Devices

LS

Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting

DE Graphical OS Chips, Display Modules, Boards

SDynamically Programmed Analog Signal Processors (dpASP’s), Field Programmable Analog Array’s (FPAA’s)

SLWireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications

DCCFL and EEFL Inverters, LED Display Products, Passive Display Enhancements

LS Microcontrollers, Touch, Memory, Automotive, Wireless / RF

DE

Embedded Board & SoM, Applied Computer & Network Device, Touch Panel Computer

SRF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs

SLSystem on a Module, ARM9/11, Cortex, Marvell ARM, PowerPC, Renesas SH, MIPS

SAudio, Imaging Solutions, Video Surveillance, Dial-Up/Embedded Modems

SLBluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories

EPC/104, PC/104-Plus, PCI/104-Express, PCI, PCI Express, CompactPCI and ISA, Digital I/O, Ethernet-to-Serial Devices

DES

Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces

SL IP Cores and System-on-Chip Solutions

D LCD Controllers

DCSTN Modules, TFT Modules, Graphic Modules, Character Modules, Capacitive Touch

P AC Power, DC Power, Embedded Power

S

ASICs, Display ICs, Interface, Microcontrollers, Network Camera, Network Control, Power Supply ICs, Print-Head ICs, Timing Products

DL

CCFL Inverters, Smart Force™ DR, Smart Force™ CCFL, Smart Force™ LED, Smart Force™ EL, Smart Kits, DC Converters

DLCD Controller Solutions, Intelligent Panels, Digital Signage Monitors

LS Communications, Networking, Storage, Interface, Power

P High-efficiency, Low-profile Power Supplies

S Optical Components, Optical Modules

LP

AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies

SVideo Transport, Optical Modules, Signal Integrity (also see Semtech)

D4 Wire and 5 Wire Analog Resistive, SAW (Surface Acoustic Wave) Touch Screens

SL 802.11 Wi-Fi Modules

SL Development Tools for Embedded Systems

SL High-performance Video Extension and USB Extension Solutions

DE Embedded System, Single Board Computers

TFT/AMOLED Displays, Integrated Touch Screens, High-Bright Displays

LS

DRAM and SRAM Memory, Audio Drivers, Multi-function IO Drivers, LED Drivers, Temperature Sensors

LS

ASICs, Display Products, High Voltage Devices, ICs, Laser Diode Drivers, Optocouplers, Power Products, Pulsed Power Systems, RF Power & Systems, Solar Power Products, Solid State Relays, Telecom Products

D Panels, Display Controllers, Inverters and Adapters

DTFT LCDs, TFT LCD with LED, Touch Screen Solutions, Color Graphic LCDs, Monochrome Graphic LCDs, Character LCDs

DHigh Brightness LCD Modules, Inverters and Open Frame Industrial Monitors

SCommunications, Microcontrollers, Audio/Speech, Security, Video, DRAM, Display Drivers, Sensors, Optical Components

ES

Programmable Clock Devices, Programmable Power Manager Devices, Programmable Logic

L Semiconductor Optical Solutions

L LED Light Engines, Drivers, Modules and Design Services

ESL

Embedded High Definition Camera Design, Digital Video Camera Development, Digital PC Camera Development and High Definition Surveillance System Development

D TFT LCDs, AMOLED, EPD, 3D Displays

D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level

41

AMERICAS SUPPLIER LISTING

LP High Voltage Power Supplies, Low Voltage Power Supplies

LS

Data Conversion, Signal Conditioning, Power Management, Interface, High Frequency & Optical, Timing

S Video Encoders, Transcoders, Decoders, SoCs, Coprocessors

LS

Processors, Storage, Wireless, Switching, Digital Entertainment, Broadband, PC Connectivity, Transceivers, System Controllers, Powerline Communications

LP AC/DC Power Supplies, DC/DC Power Supplies

LS Analog, High Bandwidth, Ethernet, RF Solutions

S

8, 16, 32-bit MCUs, Amplifiers, Comparators, Data Converters, Interface Devices, EEPROM, SRAM, Serial and Parallel FLASH, Motor Drivers, Power Management, RTCs, Temperature Management, Touch Products, Wireless

SDRAM, DRAM Modules, NAND Flash, NOR Flash, Solid State Drives, Phase Change Memory

DL

CCFL Backlight Controllers, CCFL Backlight Inverters (Single, Dual, Quad)

PS

DC/DC Converters, AC/DC Power Supplies, Digital Panel Meters, Magnetics, Data Acquisition

LP AC/DC Power Supplies, DC/DC Power Supplies

SDRAM components (SDR, DDR, DDR2, DDR3), Mobile DRAM (LPSDR, LPDDR, LPDDR2), DDR3 SDRAM Modules

DMonochrome and Color LCDs (Resolution - QVGA to SGXGA, Size - 2.7” to 21.3”)

SBluetooth Low Energy ICs, Single Chip ANT ICs, 2.4 GHz RF ICs, Sub 1 GHz RF ICs

SAudio/Speech, Telecommunications, Microcontrollers, Bus Interface, Power Management, I/O

S Analog and CMOS Image Sensors

L LED Light Engines

DOLED/PMOLED Displays, TFT/AMLCD Displays, STN/PMLCD Displays

SPCI Express, USB, Signal Conditions, Timing, Switching, Connectivity, Power Management

D EPD (E-Paper Display)

D Sunlight readable, low power displays

S Clock Oscillators, TCXO, VCXO, OCXO, Crystals

DActive Display Cables, Passive Display Cables, EL Display Cables, Inverter Input Cables

DE T E C H N O L O G Y I N C .

Enclosed Units, Display Modules, Controller Boards

SL 802.11 Wi-Fi Chipsets and Modules

SMCU & MPU, ASSP, Display Modules, Discretes, Standard ICs, Memory

SL Wireless RF Transmitter, Receiver and Transceiver Modules

LLED Modules/Arrays, LED Tube, Outdoor Lighting, BLU, Automotive, Middle Power LEDs, High Power LEDs, Flash LEDs

S Crystals & Oscillators

SDiodes, Bi-polar and MOSFET Transistors for High Reliability Applications

S

Power Management, ESD Protection, Timing and Synchronization, Optical Transport Equipment (SerDes), HiRel MIL, Low-Power RF, Digital Sensor/Signal Conditioning ICs (also see Gennum)

DLS

LCDs, Lighting, Memory, Optolectronics, Power Devices

S WirelessHD, HDMI, MHL, DVI, Storage, Video Processors

S Mobile Storage, Multimedia SoCs, Mobile Communications

S

Automotive, Wireless Audio, USB, Ethernet & Embedded Networking, PC System and I/O Controllers, Storage, Thermal Management, Capacitive Touch Sensors

LS

Analog, MEMs, Power, Automotive, Entertainment, Connectivity, Microcontrollers, Memory

LS

LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs

P DC/DC Power Converters, EMI Filters, AC/DC Power Supplies

LS

AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test

D

Passive Color LCD Modules, Active Color LCD Modules, Graphic Type Monochrome LCD Modules, Character Type Monochrome LCD Modules

DCapacitive Touch Screens, Resistive Sensors, Glass Filter Products

D Projected Capacitive Touch, Monitors, Displays, Embedded Solutions

S Mobile RAM, Specialty DRAM, Graphics DRAM, Flash Memory

STransformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components

P AC/DC Power Supplies, DC/DC Power Supplies

D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level

ExarLinear TechnologyMicrel

NuvotonSMSCST

SYSTEM MONITORING

Clock DistributionExarLatticeMicrelPericomST

Clock GenerationAKM SemiconductorExarGennumLatticeLinear TechnologyMicrelPericom / SaRonixPletronics

Crystals, Oscillators, Drivers, Buffers, PLLs

TIMING

A/D AKM SemiconductorCadekaExarLinear TechnologyMurata Power SolutionsNuvotonST

D/AAKM SemiconductorCadekaLinear TechnologyMurata Power SolutionsST

CONVERTERS

POWER & BATTERY MANAGEMENTBattery ManagementAllegro MicroSystemsLinear TechnologyMicrelST

DiscretesAllegro MicroSystemsIXYSMurata Power SolutionsRenesasSemicoaSTSupertexWurth Midcom

Hot SwapLatticeLinear TechnologyMicrelSupertex

Linear Regulators &ReferencesAllegro MicroSystemsAtmelExarLapis SemiconductorLinear TechnologyMarvell (modules)MicrelSharp MicroelectronicsSTSupertex

Motor ControlAllegro MicroSystemsST

POELinear TechnologySTSupertex

Power ManagementExarIXYSLatticeLinear TechnologyMarvellMicrelMurata Power SolutionsST

Power Modules GE EnergyLinear TechnologyMarvellMurata Power SolutionsSynQor

SwitchingAllegro MicroSystemsExarLapis SemiconductorLinear TechnologyMarvellMicrelSTSupertex

Allegro MicroSystemsAKM Semiconductor AtmelClareLapis SemiconductorNuvoton

OmnivisionSharp MicroelectronicsSMSCST

SENSORS AND IMAGING ARRAYS

DiscretesSTWurth Midcom

DriversGennumMicrelSTSupertex

AmplifiersCadekaLinear TechnologyMicrelST

IsolationCELClarePericomSharp MicroelectronicsST

ComparatorsCadekaLinear TechnologyMicrelST

FiltersLinear TechnologyMicrelSTWurth Midcom

SIGNAL CONDITIONING

POWER SUPPLIESAC-DC Low Power ExcelsysLHV PowerMean WellMurata Power SolutionsN2PowerZippyMedium Power Excelsys LHV Power Mean Well Murata Power SolutionsN2PowerSynQorZippyHigh Power Excelsys GE EnergyLHV Power Mean Well ZippyFront End GE EnergyLHV Power Mean Well Murata Power SolutionsZippyMedical Excelsys LHV Power Mean Well SynQorZippy

DC-DC Industrial Isolated / Industry Standard Bricks /Non-Isolated Point of LoadGE EnergyLHV Power Mean WellMurata Power SolutionsSynQor

Open FrameLHV Power Mean Well N2PowerZippy

Board Level ModulesIntermediate Bus ConvertersGE EnergyMurata Power SolutionsSynQor

Memory & Processor PowerMurata Power Solutions

InfraredSharp Microelectronics

LasersFinisar

LED DisplaysOptrexMurata Power Solutions

LED Arrays / ModulesSamsung LEDSharp Microelectronics

LEDs / Laser DiodesSamsung LEDSharp Microelectronics

Optical SystemsCELFinisarGennum

OptoCouplersCELSharp Microelectronics

OPTOELECTRONICS

42

dpASP Anadigm

FPAAAnadigm

4-BitEpson

8-BitAtmelEpsonISSILapis SemiconductorLattice (soft processor)NordicNuvotonRenesas ST

CENTRAL PROCESSOR

4-BitEpson

8-BitAtmelEpsonISSILapis SemiconductorLattice (soft processor)NordicNuvotonRenesas ST

16-BitEpson RenesasST

32-BitAtmelDigiLapis SemiconductorLattice (soft processor)MarvellNuvotonRenesasST

CENTRAL PROCESSOR

ModemConexantST

VoIPLapis SemiconductorMarvellNuvoton Renesas

TransceiversClareExarFinisarGennumMarvellST

TELECOMCentral Office(CODECs, SLICs, DAA, xDSL)AtmelClareConexantExarLapis SemiconductorNuvoton RenesasST

SwitchingExar

ISMAtmelLattice MicrelNordicST

RFIDAtmelLattice ST

802.11 a/b/g/nConnectBlueDigiMarvellSharpST

MicrowaveCELIXYSLattice

BluetoothConnectBlue

ZigBeeAtmelCELConnectBlueLapis SemiconductorRenesasST

Discretes (RF)AKM SemiconductorAtmelCELIXYSLinear TechnologyMicrelSTWurth Midcom

GPSAtmelST

WiMaxSharp Microelectronics

WIRELESS

ParallelLattice NuvotonPericom

Low Speed Serial (under 1 MB/sec) Exar Lapis SemiconductorLattice Linear TechnologyMicrelRenesas SMSC ST

High Speed Serial(above 1 MB/sec) GennumLattice MarvellMicrelPericom Renesas SMSCST

Level TranslatorsAtmelLattice Linear TechnologyMicrelPericomST

BUS INTERFACE

DATACOMEthernet MACMarvellMicrelSMSC ST

WAN / TransportExarGennumMarvell

Ethernet SwitchingMarvell

USBRenesasSilicon MotionSMSC

OpticalConexantFinisarGennum

Non-VolatileEPROMAtmelLapis SemiconductorST

E2PROMAKM SemiconductorAtmelISSIRenesasST

FlashAtmelISSIMicronRenesasSharp MicroelectronicsWinbond

Storage ControllersSilicon MotionSMSC

VolatileDRAMISSILapis SemiconductorNanyaMicronWinbond

SRAMAtmelISSIRenesasSharp MicroeletronicsSTWinbond

FIFOLapis Semiconductor

MEMORY

ASICAtmelEpson

CPLDAtmelLattice

FPGAAtmelLattice

LOGICSPLDAtmelLattice

StandardMurata Power SolutionsPericomRenesasST

EthernetLatticeMarvellMicrelSMSCST

Transformers / IsolatorsWurth Midcom

PHYSICAL LAYER

AKM SemiconductorCadekaConexantEpson GennumLapis SemiconductorLattice

MagnumMarvellNuvotonOmnivisionSilicon ImageSilicon Motion ST

AUDIO / VIDEO

DISK / INTERFACESAS/SCSIMarvell

SATA/ATAAtmel Exar MarvellSilicon ImageSMSC

FibreChannelLattice Marvell

Solid StateMicronSilicon MotionSMSC

43

LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.

Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.

In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.

Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.

www.nuhorizons.com/labcam

www.nuhorizons.com/seminars

www.nuhorizons.com/appnotes

Application Notes

DevelopmentTools

www.nuhorizons.com/devtools

Portal is a quarterly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.

www.nuhorizons.com/portal

enhance Your design...wiTh nu horizons educaTion and deveLoPmenT soLuTions

facebook.com/nuhorizonselectronics

twitter.com/nuhorizons

linkedin.com/in/nuhorizons

youtube.com/nuhorizonsvideo

Nu Horizons Q4 2012 Edition of Portal

Documents

Transcript of Nu Horizons Q4 2012 Edition of Portal