Nu Horizons Q1 2013 Edition of Portal
-
Upload
nu-horizons -
Category
Documents
-
view
1.094 -
download
0
description
Transcript of Nu Horizons Q1 2013 Edition of Portal
IN THIS ISSUE:
Your Gateway
to Today’s Leading
Technology Products
DEVELOPMENT TOOLSLattice Semiconductor
DISPLAYSPixel Qi
EMBEDDED SOLUTIONSAxiomtek
MEMORYISSIMicronWinbond
MICROCONTROLLERSAtmelRenesasSTMicroelectonics
POWER MANAGEMENTLinear Technology
POWER SUPPLIESMean WellN2Power
SENSORSAllegro MicroSystemsSTMicroelectronics
SIGNAL CONDITIONINGSemTech
SYSTEM MONITORINGAtmel
Q1 2013Americas Edition
See Page 13 for details
Single 26A or Dual 13A µModule Regulator
Info
, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corporation.All other trademarks are the property of their respective owners.
www.linear.com/LTM4620
1-800-4-LINEAR
Watch Videos
Scalable to 100A with Four LTM®4620 µModule® Regulators
Features
• Dual 13A or Single 26A Complete Step-Down Regulator with Inductors, MOSFETs and DC/DC Controller• 4.5V ≤ VIN ≤ 16V• 0.6V ≤ VOUT ≤ 2.5V• Internal Temperature Sense• ±1.5% VOUT Accuracy Over Temperature Including Remote Sense Amplifier• Pin-compatible with LTM4628: Dual 8A, Single 16A µModule Regulator
Package Dimensions:15mm x 15mm x 4.41mm
www.linear.com/umodule/techclips
Proof of Performance
*4 x LTM4620 for 100A **60°C Rise, TA = 28°C, 200 LFM, 12VIN, 1.2VOUT, 100A
High Efficiency Excellent Thermal Performance**Precision Current Sharing* Fast Short Circuit Protection
PO
RTA
L C
ON
TE
NT
S
Nu Horizons Electronics is a leading
distributor of advanced technology
semiconductor, display, illumination
and power solutions to a wide variety
of commercial original equipment
manufacturers (OEMs) and electronic
manufacturing services providers
(EMS).
With sales facilities in 45 locations
across North America and Asia and
regional logistics centers throughout
the globe, Nu Horizons partners with
a limited number of best-in-class
suppliers to provide in-depth product
development, custom logistics and
life-cycle support to its customers.
Need more information right away?
Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.
Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).
All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.
APPLICATION BRIEFSAtmel / Lattice / Micron / Silicon Image
High Capacity Indexed Storage System 4
Atmel / Exar / LTC / Micrel Remote Location Sensor Grid 4
DEVELOPMENT TOOLSLattice Semiconductor New FPGA Design Software 5
FEATURED COMPONENTS
DisplaysPixel Qi — New Enhanced Brightness 7” Display From the Leader in Low-power, Sunlight Readable LCDs
6
Embedded Solutions Axiomtek — Intelligent Digital Signage Applications 7
Memory Micron — P400m Enterprise SATA SSD 9
Memory Micron — Micron M500 SSD 10
Memory Winbond — Advanced Memory Solutions 11
MicrocontrollersAtmel — SAM4L Cortex-M4 MCUs Redefi ne the Power Benchmark
12
Microcontrollers STMicroelectronics — STM32 F3 Series Mixed-Signal MCUs 14-15
Power Management LTC — Two-Supply Diode-OR Current Balancing Controller 17
Power ManagementLTC — 20V, 2.5A Synchronous Monolithic Step-Down Regulator with Current and Temperature Monitoring
18
Power SuppliesN2Power — Ultra small, high effi ciency dual-output AC-DC power supply
20
SensorsAllegro MicroSystems — Introducing Allegro's Smallest Integrated Current Sensor IC
21
SensorsSTMicroelectronics — 3-Axis Digital Gyroscopes for Enhanced Motion-Control Realism and Image Stabilization
22
Signal Conditioning SemTech — High Power TVS for Ethernet Interfaces 23
System Monitoring Atmel — CryptoAuthentication™ ATSHA204 24
ADVERTISEMENTSLinear Technology Single 26A or Dual 13A μModule Regulator 2
ISSI SPI Flash 8
Renesas & MicriumChoose Renesas RX or RL78 MCUs, Get Micrium RTOS, Middleware, Support and More for FREE!
13
Linear Technology You Can Do Offl ine Power 16
Mean Well One Stop Shopping for All The Power You Need 19
Nu Horizons Product MatricesAnalog to Digital ConverterDigital to Analog Converter Display
25-27
Samsung LED / Nu Horizons Innovative Lighting Solutions 28
Nu Horizons LED Lighting Line Card 29
Nu Horizons Display Technologies Line Card 30
Nu Horizons Embedded Solutions / Single Board Computers 31
Nu Horizons Semiconductor Technologies Line Card 32-35
Nu HorizonsEnhance Your Design...With Nu Horizons Education and Development Solutions
36
4 Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes
AP
PL
ICA
TIO
N B
RIE
FS
Remote Location Sensor Grid
High Capacity Indexed Storage System
As the need for more storage capacity continues to grow it becomes increasingly important to have high-capacity archival storage that is organized for easy access without sacrificing high reliability. A hierarchical storage system can provide indexing capability to quickly find desired data records by layering higher speed memory technologies on top of the low-level mass storage media. The upper layers can provide indexing ‘pointers’ to the most heavily requested data to speed access. Additionally, in these systems, RAID (Redundant Arrays of Independent Disks) architectures can be used at the mass storage level to dramatically improve reliability.
The block diagram of a typical system is shown below. The Atmel MCU connects to a system level Ethernet port and controls access to the storage system. A Lattice ECP3 FPGA manages the storage hierarchy with the Micron eMMC memory storing the data indexes. The Silicon Image SATA to dual eSATA core storage processors implement the RAID storage functions.
Sensing systems are the eyes and ears of any automated control system. The location of the sensors is one of the more critical aspects of providing the data needed for intelligent control. Reliable power is also required and in many cases battery back-up operation is supported. In industrial applications, like process control, Power over Ethernet can also be employed to simplify power delivery to key sensors used near Ethernet controlled equipment. In some applications sensors use a wireless communications protocol to eliminate dependency on the Ethernet system and further improve reliability.
The block diagram of a typical system is shown below. The LTC LT4275 Power Over Ethernet Powered Device controller generates power for the sensor from the Ethernet RJ45 connector. The Exar XRP7724 Power Architect controller manages the overall power of the system and charges a battery that can be used during power outages. During normal operation the XRP7724 generates power for the board and uses a Micrel Ripple Blocker to minimize noise on the power lines to the MCU and RF interface sub-block. The Atmel SAM4E MCU captures information from the sensors and communicates results to the RF sub-system.
Scan barcode to accessapplication note
Scan barcode to accessapplication brief
Silicon Image
SATA to Dual
eSATA
RaidStorage
RaidStorageAtmel
SAM3X MCU Silicon
Image
SATA to Dual
eSATA
RaidStorage
RaidStorage
Lace
ECP3
MicroneMMC
SystemEthernet
Atmel
SAM4E MCU
Micrel
RippleBlocker
LTC
LT4275PoE PD
Exar
Power ArchitectXRP7724
ADCSensors
I2C
EnetPSE
RFInterface
Baery
5
DE
VE
LO
PM
EN
T T
OO
LS
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
New FPGA Design SoftwareContact your local Nu Horizons FAE today for a demonstration!
Key New / Improved Features:
Improved Design Exploration: Power Matrix
Improved Design Exploration: Power Comparison Between Design Implementations
Improved Design Exploration: Compare Power Consumption Between Power Modes
Improved Design Exploration: Calculate Average Power Consumption in Time
More Effi cient Design Flow: Power Calculator – Avoid NCD Reload (performance)
More Effi cient Design Flow: Report on BLOCK paths
More Effi cient Design Flow: Report on Unconstrained paths
Lattice Synthesis (LSE) Used by Default in Any New XO or XO2 Projects
Ease of Use Throughout: Hierarchical View
More Effi cient Design Flow: Better, More Predictable Results
More Effi cient Design Flow: Faster Multi-PAR runtimes
Improved Ease of Use Throughout: Reveal Supports Mixed Language Designs
Improved Ease of Use Throughout: Auto-add top level signals to Simulation Waveform
Ease of Use Throughout: FPGA Design Guide Updates
Lattice Diamond design software offers leading-edge design and implementation tools optimized for cost sensitive, low-power Lattice FPGA architectures. Diamond 2.1 includes many improvements to ease of use, and refl ects Lattice’s continued investment in providing the best low power solution in the industry.
Scan barcode for more LatticeDiamond Software information
Note1: For Linux, there are unique 32-bit and 64-bit installers for LatticeMico System even though LMS is always a 32-bit application. The 32-bit installer is to be used with 32-bit Linux, and the 64-bit installer is to be used for 64 bit Linux.
Order Numbers
Diamond-E-12M Lattice Diamond 12 month electronic subscription
ALDEC-USBKEY Aldec USB key for fl oating license
HW-USBN-2A USB download cable
LatticeMico System (LMS):LatticeMico System is a separate tool to Diamond, but released with it. It has a signifi cant new feature combined with being an even more productive development environment for embedded systems.
Generate Platform Without Processor: LatticeMico System is now able to generate a Platform that does not include a processor. An example use is to create a Platform of peripherals (e.g. several UARTs). This is then implemented in the FPGA and wired to a discrete processor chip, thus expanding the processor’s peripheral mix.
Software Windows Linux
Diamond – 32-bit appPower Estimator – 32-bit appProgrammer – 32-bit appReveal – 32-bit app
Windows 7 (32-bit), Vista (32-bit), XP (32-bit) Red Hat 4, 5, 6; SUSE 10.1 (32-bit)
Diamond – 64-bit appPower Estimator – 64-bit appProgrammer – 64-bit appReveal – 64-bit app
Windows 7 (64-bit) Red Hat 4, 5, 6 (64-bit)
LatticeMico System – 32-bit app Windows 7 (32 & 64-bit), Vista (32-bit), XP (32-bit)Red Hat 4, 5, 6; SUSE 10.1 (32-bit)Red Hat 4, 5, 6 (64-bit) - see Note 1
ORCAstra – 32-bit app Windows 7 (32 & 64-bit), Vista (32-bit), XP (32-bit) Not Supported
DIS
PL
AY
S
6 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
New Enhanced Brightness 7” Display From the Leader in Low-power, Sunlight Readable LCDs The PQ070WS02 applies Pixel Qi’s unique display structure to minimize power and deliver unmatched usability and readability in all lighting conditions
Pixel Qi’s new enhanced brightness 7” display, the PQ070WS02,
addresses the widespread need for outdoor-capable, mobile
products. Pixel Qi’s patented technology combines a highly effi cient
transmissive optical structure with unique refl ective technology to
create a display that outperforms conventional sunlight readable
displays in power and readability. Pixel Qi technology is capable of
providing greater than a 10x reduction in power consumption versus
conventional 7” high bright solutions. This display allows the designer
to increase battery life and decrease system cost while providing a
superior viewing capability in the brightest lighting conditions. The
display is easy to integrate into existing systems and new designs
using the display’s standard interface and mechanical design.
The PQ070WS02 builds on Pixel Qi’s present 7” display, more
than doubling the backlit transmissive front-of-screen brightness to 400nits minimum. The boost in brightness means the PQ070WS02 has enhanced color performance
in all lighting conditions, while maintaining its low power refl ective capability. The PQ070WS02 is specifi cally designed with extended temperature capability.
Pixel Qi technology originated from the One Laptop per Child display and can be found in many “use anywhere” products. Pixel Qi technology has been deployed
in the millions worldwide. Pixel Qi offers both 10.1” and 7” diagonal sizes and will soon announce a new 4.X” display.
Scan barcode for more PQ070WS02 information
FEATURES:
Diagonal: 7”
Resolution: 1024x600
Refl ectance: 20%
Dark Room Brightness: 400 nits minimum
Color: 45% NTSC
Interface: 30pin LVDS
Dimensions (HxVxT): 164.3x101.3x3.5mm
Operating temperature: -35 to +70
Touch capable
BENEFITS:
Superior viewing capability in the brightest lighting situations.
Low-power, sunlight readable, <0.5 watts in refl ective mode
Increased battery life and decreased system cost
Wide temperature range for use anywhere capability
Reduced eye strain for reading applications in refl ective mode
Easy integration: standard size, standard driver electronics (LVDS), EDID enabled
APPLICATIONS:
Rugged Mobile Computing
POS
Automotive/Motorcycle / Marine
GPS
Kiosk
Embedded computing
E-Reading
7For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
EM
BE
DD
ED
SO
LU
TIO
NS
Digital Signage is more prevalent and diversifi ed than ever. Digital signage could be seen in
supermarkets, restaurants, transportation centers, retail stores, kiosk and more. The interactive
kiosk introduces another business – E-Board for meeting in corporate and education in schools.
Axiomtek’s Digital Signage solution is an excellent platform to manage and broadcast visual
and audio content effectively to provide visitors with information, entertainment and a variety
of other content. Axiomtek offers three product series of digital signage solution, ensuring that
your application need can be met.
Intelligent Digital Signage ApplicationsAxiomtek Total Digital Signage Systems with High Performance Intel® Technology
Scan barcode for more Axiomtek Digital Signage information
OPS Series – Intel® OPS Digital Signage Player & E-Board:
Intel® Open Pluggable Specifi cation (OPS) compliance
Supports 3rd Generation Intel® Core™ i7/ i5/ i3
Remote management: Intel® AMT 8.0
Easy maintenance: pluggable HDD and easy-to-change DRAM HDMI for 2nd display
DSA/DSH Series - Digital Signage System:
Axiomtek’s DSA series is an all-in-one digital signage solution with a pluggable engine
box for easy maintenance. Having the ability to simply slot-in and slot-out the pluggable
modules reduce the maintenance dramatically.
Pluggable engine box: Easy system confi guration and maintenance
Water/dust-proof design (front bezel: IP65, without touch screen)
46“/42”/32” TFT LCD - Full HD 1920 x 1080P
Self diagnosis and built-in sensors: external temperature , LCD color and LCD backlight
Motion detection sensors (optional)
Interactive IR touch solution (optional)
Supports VESA FPMPMI compliant fl at panel mount
Bus Digital Signage:
The bus digital signage is the fi rst solution which provides real-time information and
location-based advertisement which provides the passengers coupon and information on
nearby shopping mall and restaurants.
32” LED backlight LCD / 32” TFT LCD – Full HD 1920 x 1080P
Intel® Open Pluggable Specifi cation (OPS) compliance
Supports VESA FPMPMI compliant fl at panel mount
Optional SAW touch screen / Interactive IR touch screen solution (optional)
Pluggable engine box: Easy system confi guration and maintenance (optional)
Shopping MallShopping Mall
OFP320
OPS870
E-Board in Corporate/Education
OPS860
Train/Subway Station
DSA-142
Bus Station
OFP921-834
SPI FlashA Complete Offering
from 256Kb to 256Mb
1940 Zanker Rd., San Jose, CA. 95112 • Tel: 408.969.6600 • Support: [email protected] • www.issi.com
IS25LD/WD Family: pFlash® Technology(< 8Mb)• Data Retention: Superior Endurance Min 20 yrs after 200K
cycles (Best in the industry)
• Temperature Range: - 40°C ~ + 105°C• Frequency: 80/100MHz burst read in single/dual IO• Low Power Consumption: (LD) 2.5V : 10mA read & 15mA erase/pgm current at 33MHz 10ms sector erase time (WD) 1.8V : 2mA read & 106mA erase/pgm current at 30MHz 7ms sector erase time• Safeguard (OTP): Protection at all time
IS25LQ/WQ: nFlash® Technology (> 4Mb to 256Mb and growing)• Data Retention: Min 20 years after 100k• Temperature Range: - 40°C ~ + 125°C• Frequency: 104 MHz burst read single/dual/quad IO and QPI• Low Power Consumption (LD) 2.5V : Max 10mA read & 15mA erase/pgm current at 33MHz Max 0.7ms burst page program, 1~256B length (WD) 1.8V : Max 10mA read & 15mA erase/pgm current at 33MHz Max 0.7ms burst page program, 1~256B length• Safeguard (OTP): Protection at all time
Standard Features:ISSI’s full portfolio of Standard Grade and Automotive grade IS25LD/WD and IS25LQ/WQ serial flash multi-I/O memories feature the popular Serial Peripheral. The 25LD family offers highest perfor-mance & endurance of 200K cycles (best in the industry) and 20 years of data retention. The IS25LD/WD family supports Dual-SPI effectively doubling standard SPI clock rates. Whereas, the IS25 LQ/WQ family supports single, Dual-I/O and Quad-I/O for even higher performance. These parts can support up to 104MHz an equivalent of 416Mhz (50Mb/sec throughput) when using Quad mode.
0
50
100
150
200
250
300
350
400
450
SPI 80MHz SPI 104MHz SPI dual IO 80Mhz
SPI dual IO 100Mhz
SPI quad 104Mhz
Parallel (x8) 90nS
Parallel (x16) 90nS
Parallel (x8) 70nS
Parallel (x16) 70nS
Mb/
s
Interface
Maximum Data Transfer - (Throughput Mb/s) CS#SCKSISO
WP#HOLD#
CS#SCKIO0IO1WP#
HOLD#
CS#SCKIO0IO1IO2IO3
x1
x2
x4
NOR Based SPI Products are Available with x1, x2 and x4 Bus Widths
→←
↔↔
↔↔↔↔
Applications:• Medical• Industrial Controls• Energy Management • Automotive Telematics
• GPS• Cluster• Navigation
• ADAS• Infotainment• Rear Front Camera• Telecommunications
Temperature Grade• E= Extended grade (-40C to +105C)• A1 = Automotive grade (-40C to +85C)• A2 = Automotive grade (-40C to +105C)• A3 = Automotive grade (-40C to +125C)• KGD ( Call Facotry)
The Serial Flash is widely used due to the inherent advantages it offers such as low pin count, small footprints, increased throughput that enables XIP operation and/or offer improved boot time for code shadowing applica-tions. Automotive industry’s rich innovation of Electronics such as infotain-ment, ADAS, navigation, digital console, speech recognition, advanced diagnostics and other emerging segments require automotive grade flash memory. ISSI’s serial flash products AEC-Q100 and TS-grade compliant parts will be available in 2013.
* ISSI offers a complete portfolio of SRAM,DRAM, and Analog solutions
9For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
ME
MO
RY
P400m Enterprise SATA SSDEnterprise Performance and Reliability for Data Centers
Our P400m drive provides enterprise-level performance and reliability with superior data protection that is unmatched by
competing products. Built from the ground up using our extended performance and enhanced reliability technology (XPERT) and
25nm MLC NAND, the P400m SSD provides an optimal balance of endurance and speed.
Advanced read/write management, data path protection, and physical power-loss protection are built
into the P400m to ensure no loss of data under any circumstance. The P400m runs on Micron’s customized
fi rmware, which is designed to integrate our NAND-chosen controller into a cohesive system. All of these
features are provided by a trusted NAND manufacturer, ensuring a high-quality product with reliable customer
support.
APPLICATIONS:
Blade Servers
Enterprise Servers
Video-on-Demand (VOD) Systems
Financial Applications
Virtualization Appliances
Data Warehouses
Scan barcode for more P400m information
Advanced read/write management, data path protection, and physical power-loss protection are built
P400m
Capacity* 100GB, 200GB, 400GB
Interface SATA 6 Gb/s; backward-compatible to SATA 3 Gb/s
Sequential Read/Write Performance
Up to 350/300 MB/s
Random Read/Write Perfor-mance
Up to 55,000/17,000 IOPS
Active Average Power Consumption**
<5W
Idle Power Consumption <0.75W
Operating Shock 1500G/1ms
Operating Vibration 2–500Hz at 3.1G
MTTF 2 million device hours
Endurance Up to 7PB lifetime data written
Operating Temp Commercial (0˚C to +70˚C)
Form Factor 2.5-inch drive: 100.5 x 69.85 x 7.0mm
Weight <125g MAX
*Unformatted. 1GB = 1 billion bytes. Formatted capacity is less. **Data taken at 25°C using a 6 Gb/s SATA interface.
BENEFITS:
High Endurance Enterprise-focused endurance specifi cations (10 drive fi lls per day for 5 years) extend drive life
Superior Data Protection ARM/OR read management, RAIN NAND confi guration, DataSAFE data path protection, and physical power loss protection—all in one device
High Performancey High throughput and low latencies enabled by ReCAL technology deliver superior performance over hard disk drives (HDDs)
Low Power Consumes signifi cantly less power than HDDs and requires almost zero cooling
Enterprise-Focused Design Micron’s XPERT feature set delivers enterprise-level reliability and performance to an MLC drive
Part Density Size Voltage Sequential Read/Write (MAX) Random Read/Write (MAX)
MTFDDAK100MAN-1S1AA 100GB2.5-inch drive:
100.5 x 69.85 x 7.0mm5V±10% 350/210 MB/s
50,000/14,000 IOPS
MTFDDAK200MAN-1S1AA 200GB2.5-inch drive:
100.5 x 69.85 x 7.0mm5V±10% 350/300 MB/s
55,000/16,000 IOPS
MTFDDAK400MAN-1S1AA 400GB2.5-inch drive:
100.5 x 69.85 x 7.0mm5V±10% 350/300 MB/s
55,000/17,000 IOPS
ME
MO
RY
10 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Micron M500 SSDBoost Your Mobile Computing Experience
Micron’s next-generation M500 solid state drive (SSD) is designed to meet the increasingly demanding needs of
the mobile computing market. The M500 delivers strong performance, greatly reduces power consumption, and
provides exceptional data protection. It is offered in three thin, ultra-compact form factors in several
different capacities.
Built using Micron’s 20nm NAND Flash—one of the most costeffective NAND devices
in the industry—the M500 provides high quality and reliability at a very competitive
price. This drive gives consumers a real boost in performance and responsiveness
that will keep them coming back for more SSD-powered solutions.
BENEFITS:
High Performance and Responsiveness Signifi cantly faster boot, fi le, and application load times compared to traditional hard drives
Low Power Low power consumption translates to longer battery life
Robust Data Security and Reliability Built-in data protection features, including best-in-class encryption, provide security and reliability without impacting drive performance
Flexibility Three ultra-compact form factors available in several capacities to meet unique application requirements
APPLICATIONS:
Ultrathin computers
Notebook computers
Tablets
Desktop PCs
Video-on-demand systems
Embedded systems
Scan barcode for more M500 SSD information
2.5-Inch mSATA M.2
Capacity*120GB, 240GB, 480GB, 960GB
120GB, 240GB, 480GB
120GB, 240GB, 480GB
Interface SATA 6 Gb/s
Sequential Read Performance Up to 500 MB/s
Sequential Write Performance
120GB: Up to 130 MB/s; 240GB: Up to 250 MB/s; 480GB and 960GB: Up to 400 MB/s
PCMark® Vantage Scores Up to 80,000
Active Average Power Consumtion**
150mW
Idle Power Consumption <100mW
Operating Temp Commercial (0˚C to 70˚C)
Dimensions100.45 x 69.85 x
7mm50.80 x 29.85 x
3.75mm80 x 22 x 3.5mm
Weight 70g MAX 10g MAX 10g MAX
*Unformatted. 1GB = 1 billion bytes. Formatted capacity is less. **Data taken at 25°C using a 6 Gb/s SATA interface. Power measured while running MobileMark® 2012. DIPM (device-initiated power management) enabled.
Micron’s next-generation M500 solid state drive (SSD) is designed to meet the increasingly demanding needs of
the mobile computing market. The M500 delivers strong performance, greatly reduces power consumption, and
Built using Micron’s 20nm NAND Flash—one of the most costeffective NAND devices
in the industry—the M500 provides high quality and reliability at a very competitive
Part Density Form Factor Voltage Sequential Read/Write (Up to) Random Read/Write (Up to)
MTFDDAK120MAV 120GB 2.5-inch 5V ±10% 500/130 MB/s 62,000/35,000 IOPS
MTFDDAK240MAV 240GB 2.5-inch 5V ±10% 500/250 MB/s 72,000/60,000 IOPS
MTFDDAK480MAV 480GB 2.5-inch 5V ±10% 500/400 MB/s 80,000/80,000 IOPS
MTFDDAK960MAV 960GB 2.5-inch 5V ±10% 500/400 MB/s 80,000/80,000 IOPS
MTFDDAT120MAV 120GB mSATA 3.3V ±5% 500/130 MB/s 62,000/35,000 IOPS
MTFDDAT240MAV 240GB mSATA 3.3V ±5% 500/250 MB/s 72,000/60,000 IOPS
MTFDDAT480MAV 480GB mSATA 3.3V ±5% 500/400 MB/s 80,000/80,000 IOPS
MTFDDAV120MAV 120GB M.2 3.3V ±5% 500/130 MB/s 62,000/35,000 IOPS
MTFDDAV240MAV 240GB M.2 3.3V ±5% 500/250 MB/s 72,000/60,000 IOPS
MTFDDAV480MAV 480GB M.2 3.3V ±5% 500/400 MB/s 80,000/80,000 IOPS
11For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
ME
MO
RY
Scan barcode for more Winbond
memory solutions
Advanced Memory Solutions
SPIFLASH® SERIAL FLASH MEMORIES:
Winbond's W25X and W25Q SpiFlash® memories feature the popular Serial Peripheral Interface (SPI), densities from 512K-bit to 512M-bit, small erasable sectors and the industry's highest performance. The W25Q family operates up to 104MHz and supports "Quad-SPI", increasing effective clock rate to 416MHz. SpiFlash® memories offer a pin, space and cost effi cient alternative to ordinary Parallel Flash memories, and are ideal for a wide range of applications including: PCs, DVD, Blu-Ray, WLAN, DSL & cable modems, printers, hard drives, set-top-box, LCD-TV, mobile phones, bluetooth, GPS, MP3, meters, DSP, FPGAs, automotive and more.
PARALLEL FLASH MEMORIES:
Winbond's W29GL family of Page Mode Parallel Flash memories are offered in densities from 32Mb to 512Mb and support industry standard interfaces and architectures. They are drop-in replaceable to the x29GL products available in the industry with no fi rmware change. They also offer faster program and erase times which improves customer throughput and offers faster fi rmware updates. Our Parallel Flash products are ideal for a wide variety of applications including: networking, set-top-box, DSL and cable modems, servers, industrial, wireless routers, PC peripherals, printers, mobile phones, digital cameras and more.
SPECIALTY AND MOBILE DRAM:
Winbond DRAM product portfolio consists of high performance Mobile DRAM and Specialty DRAM. These products are widely used by leaders in the consumer, communication, computer peripheral and automotive markets. Besides discrete parts, Winbond also offers Known-Good-Die (KGD) in wafer format to SiP and MCM customers. Winbond performs 100% burn-in and at-speed test to ensure high quality on our KGD products.
Density/ Interface
Specialty DRAM Mobile RAM
SDR DDR DDR2 DDR3 GDDR3 PSRAM LPSDR/ LPDDR LP DDR2
16Mb Yes
32Mb Yes Yes Yes
64Mb Yes Yes Yes
128Mb Yes Yes Yes Yes Yes
256Mb Yes Yes Yes Yes Yes Q4-13
512Mb Yes Yes Q2-13
1Gb Yes Yes Yes Q2-13 Q3-13
2Gb Yes Yes Q2-13
DensitySecure Sectors Speed
(ns)Page
Access (ns)Package
Boot/Uniform Sectors Sector Location
32M-bitTop/Bottom Boot Top/Bottom two sectors 70 25 TSOP48, TFBGA48, LFBGA64
Uniform Sector High/Low Sector 70 25 TSOP56, LFBGA64
64M-bitTop/Bottom Boot Top/Bottom two sectors 70 25 TSOP48, TFBGA48, LFBGA64
Uniform Sector High/Low Sector 70 25 TSOP56, LFBGA64
128M-bit Uniform Sector High/Low Sector 90 25 TSOP56, LFBGA64
256M-bit Uniform Sector High/Low Sector 90 25 TSOP56, LFBGA64
512M-bit Uniform Sector High/Low Sector 90 25 TSOP56, LFBGA64
Density Speed MHz Voltage Package Temp.AEC-Q100
Automotive
512K-bit 50/104 2.5V, 3V SO8, TSSOP8, WSON8, USON8 I
1M-bit 50/104 2.5V, 3V SO8, TSSOP8, VSOP8, WSON8, USON8 I
2M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, USON8 I, A √
4M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, PDIP8, USON8 I, A √
8M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, PDIP8, USON8, WLBGA8 I, A √
16M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, USON8, WLBGA8 I, A √
32M-bit 80/104 1.8V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, USON8 I, A √
64M-bit 80 1.8V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, USON8 I, A √
128M-bit 70/104 1.8V, 3V SO8, VSOP8, SO16, WSON8, TFBGA24, USON8 I, A √
256M-bit 104 3V SO16, WSON8, TFBGA24 I, A √
512M-bit 104 3V SO16, WSON8, TFBGA24 I, A √
MIC
RO
CO
NT
RO
LL
ER
S
12
Atmel SAM4L ARM-based Cortex-M4 MCUs Redefi ne the Power BenchmarkThe industry’s fi rst device to provide ultra-low power consumption bundled with unrivaled wake-up times, delivering the highest total application performance in all operating modes
The Atmel® SAM4L family sets new low-power and effi ciency standards for ARM®-based Cortex®-M4 microcontrollers (MCUs). Used in hundreds of millions of Atmel AVR® MCUs in the market today, the SAM4L family features ultra-low Atmel picoPower® technology and consumes just one-third the power of current solutions. The family is also the lowest power Cortex-M4 microcontroller-based solution on the market today, running at just 90μA/MHz in active mode. The new devices consume 1.5μA in sleep mode with full random access memory (RAM) retention, and 700nA in back-up mode.
With wake-up times down to 1.5μs from even the deepest sleep modes, the SAM4L family is ideal for battery-powered consumer, industrial and portable healthcare products. The devices take advantage of the numerous
picoPower power-saving innovations, including Atmel SleepWalking, Peripheral Event System, unrivaled wake-up times and intelligent peripherals. To reduce overall power consumption, the SAM4L devices feature peripherals such as the innovative LCD controller that includes ASCII character mapping, hardware scrolling and blinking support. The SAM4L family has two series available, the LS series and the full-featured LC series. There are 48-, 64- and 100-pin package options available in both QFP and QFN, as well as 64-pin WLCSP and 100-pin BGA package options for space-constrained designs.
The SAM4L-EK evaluation kit is also available with the SAM4L family to help accelerate designs. The SAM4L-EK includes an embedded debugger, power measurement, LCD, USB and capacitive touch. In addition, the SAM4L-EK measures the current consumed by the MCU through independent circuitry, and displays this in real time. The SAM4L-EK is supported by the Atmel Studio 6 integrated development platform (IDP), which features project examples, debugging support and other resources.
Scan barcode for more SAM4L Cortex-M4MCUs information
FEATURES:
SleepWalking intelligent peripherals — allows a peripheral to qualify and evaluate incoming data without using the CPU, eliminating unneeded processor wake-ups and conserving power
Peripheral Event System — a real-time network that allows peripherals to communicate directly with each other without using the CPU
Unrivaled wake-up — whether on a proximity, a touch, an I2C address match or an ADC threshold, all without using the CPU
BENEFITS:
Ultra-low power consumption: picoPower technology ensures that devices are designed to consume the lowest power possible, while delivering long battery life without any performance sacrifi ce.
Highly effi cient signal processing: Thanks to the Cortex-M4 core, the SAM4L series provides highly effi cient signal processing with extended single-cycle multiply-accumulate instructions, optimized SIMD arithmetic and saturating arithmetic instructions.
Intelligent and effi cient peripherals: SAM4L devices offer a broad range of peripherals that are integrated into the Peripheral Event System and feature SleepWalking technology, along with other embedded power-saving features.
Ease of use: Backed by an ecosystem of design tools, the SAM4L series is easy to use, facilitating faster time to market. Design with the Atmel Studio 6 integrated development environment (IDE), which includes more than 1,500 project examples with source code, simulation tools and a powerful editor.
APPLICATIONS:
Industrial
Process transmitters
Sensors and detectors
Sub-meters
Sensor hub
Healthcare
Glucose meters
Pulse oximetry
Human fall detection
Blood pressure
Consumer
Sport watches
Remote control
Toys
Sensor hubs
Atmel SAM4L-EK Board
Choose Renesas RX or RX or RX RL78 MCUs. Get Micrium RTOS, Middleware, , Middleware, Support and More for FREE! Support and More for FREE!
FREE Micrium RTOSMicrium RTOS
FREE Micrium MiddlewareMicrium Middleware
FREE Renesas Kits & BoardsRenesas Kits & Boards
The Power of Two Micrium Promotion ProductsKernel µC/OS-II µC/OS-III
TCP/IP µC/TCP-IP
TCP/IP Extensions
µC/DHCPc µC/POP3cµC/FTPcs µC/SMTPcµC/TFTPcs µC/TELNETsµC/HTTPs
USB-Device
µC/USB Device
PHDC CDCHID ACMMSC
USB-Host
µC/USB Host
HID ACMMSC Printer classesCDC
File System µC/FS – FAT12/16/32
CAN µC/CAN
CANOpen µC/CANopen
Modbus µC/Modbus
Data Visualization Yes (µC/Probe) – 1 seat Free
Total Value of Free Products $111, 000 USD*
September 10, 2012 thru March 31, 2013 thru March 31, 2013 thru
$111,000 VALUE*
am.renesas.com/micrium
ofthe
The Power of Two – Renesas & MicriumThe Power of Two – Renesas & Micrium
Renesas and Micrium join forces to present an exciting offer for production users of Renesas’ flagship RX and RL78 MCUs.
RX and RL78 customers can get free:
Micrium’s real-time deterministic multitasking Kernel – µC/OS-II or µC/OS-III (single production license)
Middleware (TCP/IP, USB, File System and others)
One year of support and maintenance from Micrium
The new customer project must use a Renesas RX or RL78 MCU, and it must be used in a commercial application.
The Power of Two
* Based on using all available promotion items.
No royalties. No licensing fees. All source code supplied!Available in the Americas only: North America, South America and Central America.
For full rules and regulations, please visit us at our website.
© 2012 Renesas Electronics America Inc. (REA). All rights reserved. All trademarks are the property of their respective owners
RL78 RDK
PART#: PART#: YRDKRL78G13YRDKRL78G13
RX630 RDK
PART#:PART#:YRDKRX63NYRDKRX63NYRDKRX63N
APPLICATIONS:
Industrial
Process transmitters
Sensors and detectors
Sub-meters
Sensor hub
Healthcare
Glucose meters
Pulse oximetry
Human fall detection
Blood pressure
Consumer
Sport watches
Remote control
Toys
Sensor hubs
MIC
RO
CO
NT
RO
LL
ER
S
14 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
STM32 F3 Series Mixed-Signal MCUs32-bit MCUs with DSP instructions and FPU plus optimum analogintegration to complement STM32 F1 and F4 series.
The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost.
The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration.
The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices.
The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.
FEATURES: BENEFITS:
Performance 72 MHz/62 DMIPS (from Flash) or 94 DMIPS (from CCM-SRAM* Cortex-M4 with single cycle DSP MAC and floating point unit
Boosted execution of control algorithms More features possible for your applications Ease of use Better code efficiency Faster time to market Elimination of scaling and saturation Easier support for meta-language tools
Real-time performance CCM-SRAM* (core coupled memory): 8 Kbytes of SRAM mapped to the instruction bus; critical routines loaded in the 8-Kbyte CCM at startup can be completed at full speed with zero wait states, achieving 94 Dhrystone MIPS and CoreMark score 155 at 72 MHz SRAM and CCM-SRAM with parity bit 32-bit, AHB bus matrix DMA controllers Memory protection unit (MPU)
More performance for critical routines with zero-wait state execution from safe CCM-SRAM
Outstanding power efficiency Stop mode down to 5.1 μA typ
RTC down to 0.5 μA typ in VBAT mode
2.0 to 3.6 V or 1.8 V +/-8% power supply range
Flexibility to reduce power consumption for applications requiring advanced analog peripherals and low-power modes Running at low voltage or on a rechargeable battery
Maximum integration Up to 256 Kbytes of on-chip Flash memory, up to 48 Kbytes of SRAM, reset circuit, internal RCs, PLLs, WLCSP package available
More features in space-constrained applications
Superior and innovative peripherals Analog: 4x 12-bit ADC 5 MSPS* reaching 18 MSPS in interleaved mode, 3x 16-bit sigma- delta* ADC up to 50 KSPS, fast comparators* (50 ns), programmable gain amplifers* (4 gains, 1% accuracy), 12-bit DACs Up to 17 timers: 16 and 32 bits running up to 144 MHz* Audio: simplex or full duplex I²S interfaces* Up to 12 communication interfaces including 5x USART (9 Mbit/s), 3x SPI/I²S (18 Mbit/s), 2x I²C (1 MHz fast mode plus), CAN (1 Mbit/s), USB full speed Consumer electronic control (CEC)* Cyclic redundancy check (CRC) RTC/AWU Capacitive touch sensing (24 keys)
Full set of integration features on chip resulting in simplified board designs and fewer external components BOM cost reduced
STM32 Compatibility Pin compatibility and same API for peripherals as F1 series More than 350 Cortex-M based compatible STM32
devices More than 70 Cortex-M4 based compatible STM32 devices Digital signal processing (DSP) capability at competitive price
15For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Scan barcode for more STM32 F3 Series information
MIC
RO
CO
NT
RO
LL
ER
S
APPLICATIONS:
Digital signal control
Home appliances Dual/single advanced motor control
Medical Portable devices
Consumer Gaming Entry level audio Biometric sensors Portable fitness
Industrial
Metering
Solar microinverter
Digital power conversion Entry-level digital power supplies (DSMPS)
LED lighting
DEVELOPMENT TOOLS:
A complete offer of development tools is available, including the following kits and evaluation boards:
Low-cost STM32F3-Discovery kit featuring an STM32F30x MCU, ST’s MEMS 3-axis digital output gyroscope and e-compass (3D digital linear accelerometer and 3D digital magnetic sensor).
Two full-featured boards for demonstration and evaluation purposes: STM32F303 line: STM32F303VCT6 MCU with two inductor-motor-control 34-pin connectors, a humidity sensor, 1-Mbit SPI, serial Flash (order code: STM32F303C-EVAL*)
DSTM32F373 line: STM32F373VCT6 MCU with ECG (electrocardiogram) sensor, pressure sensor and PT100 temperature sensor connected to the 3 16-bit sigma-delta ADCs, a touch slider, HDMI connectors (CEC and DDC), light dependent resistor (LDR) (order code: STM32373C-EVAL)
Both boards feature standard peripherals such as 240x320 TFT color LCD, 2 Gbyte or more byte microSD card (SPI interface), I²C compatible temperature sensor, EEPROM and RF Dual Interface EEPROM (I²C and RF), RS-232 communication and IrDA transceiver, USB FS connector, CAN 2.0A/B compliant connection, potentiometer, JTAG/SWD and ETM connectors, and an embedded ST-LINK/V2 for easy debugging and programming.
STM32F3DISCOVERY STM32373C-EVAL
2
STM32 F3 series
32-bit MCUs with DSP instructions and FPU plus optimum analog integration to complement STM32 F1 and F4 series
The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost. The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration. The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices. The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.
STM32 F3 PRODUCT LINESBoth product lines include:
Cortex-M4 + FPUFmax = 72 MHz
MPUPLL
Low and high speed internal oscillators
2x watchdogs + RTC(real-time clock)
HW CRCReset circuitry
POR/PDR
Multiple DMACommunication
peripheralsUSART, SPI, I²C
Multiple 16-bit timers1x 32-bit timer
Temperature sensorBackup registers
ETMReset + BOR PVD
STM32F372/373/383 lines
Up to 256-Kbyte
Flash
3x DAC12-bit
2x comparator
1x 12-bitADC
1 MSPS SAR
Up to 32-Kbyte
SRAM
3x 16-bit Σ∆ ADC CEC CAN
2.0BUSB
2.0 FS
STM32F302/303/313 lines
Up to 256-Kbyte
Flash
2x16-bitAMCtimer
2x DAC12-bit
7x comparator
4x 12-bitADC
5 MSPS SAR
Up to 40-Kbyte
SRAM
8-Kbyte code SRAM
4x PGA CAN 2.0B
USB2.0 FS
Abbreviations:
FS: full speed
AMC: advanced motor control
SDIO: secure digital input/output
FPU: floating point unit
DSC: digital signal controller
SAR: successive approximation register
BOR: brown-out reset
PVD: power voltage detector
MPU: memory protection unit
CEC: consumer electronic control
ETM: Embedded Trace Macrocell
2
STM32 F3 series
32-bit MCUs with DSP instructions and FPU plus optimum analog integration to complement STM32 F1 and F4 series
The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost. The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration. The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices. The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.
STM32 F3 PRODUCT LINESBoth product lines include:
Cortex-M4 + FPUFmax = 72 MHz
MPUPLL
Low and high speed internal oscillators
2x watchdogs + RTC(real-time clock)
HW CRCReset circuitry
POR/PDR
Multiple DMACommunication
peripheralsUSART, SPI, I²C
Multiple 16-bit timers1x 32-bit timer
Temperature sensorBackup registers
ETMReset + BOR PVD
STM32F372/373/383 lines
Up to 256-Kbyte
Flash
3x DAC12-bit
2x comparator
1x 12-bitADC
1 MSPS SAR
Up to 32-Kbyte
SRAM
3x 16-bit Σ∆ ADC CEC CAN
2.0BUSB
2.0 FS
STM32F302/303/313 lines
Up to 256-Kbyte
Flash
2x16-bitAMCtimer
2x DAC12-bit
7x comparator
4x 12-bitADC
5 MSPS SAR
Up to 40-Kbyte
SRAM
8-Kbyte code SRAM
4x PGA CAN 2.0B
USB2.0 FS
Abbreviations:
FS: full speed
AMC: advanced motor control
SDIO: secure digital input/output
FPU: floating point unit
DSC: digital signal controller
SAR: successive approximation register
BOR: brown-out reset
PVD: power voltage detector
MPU: memory protection unit
CEC: consumer electronic control
ETM: Embedded Trace Macrocell
2
STM32 F3 series
32-bit MCUs with DSP instructions and FPU plus optimum analog integration to complement STM32 F1 and F4 series
The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost. The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration. The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices. The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.
STM32 F3 PRODUCT LINESBoth product lines include:
Cortex-M4 + FPUFmax = 72 MHz
MPUPLL
Low and high speed internal oscillators
2x watchdogs + RTC(real-time clock)
HW CRCReset circuitry
POR/PDR
Multiple DMACommunication
peripheralsUSART, SPI, I²C
Multiple 16-bit timers1x 32-bit timer
Temperature sensorBackup registers
ETMReset + BOR PVD
STM32F372/373/383 lines
Up to 256-Kbyte
Flash
3x DAC12-bit
2x comparator
1x 12-bitADC
1 MSPS SAR
Up to 32-Kbyte
SRAM
3x 16-bit Σ∆ ADC CEC CAN
2.0BUSB
2.0 FS
STM32F302/303/313 lines
Up to 256-Kbyte
Flash
2x16-bitAMCtimer
2x DAC12-bit
7x comparator
4x 12-bitADC
5 MSPS SAR
Up to 40-Kbyte
SRAM
8-Kbyte code SRAM
4x PGA CAN 2.0B
USB2.0 FS
Abbreviations:
FS: full speed
AMC: advanced motor control
SDIO: secure digital input/output
FPU: floating point unit
DSC: digital signal controller
SAR: successive approximation register
BOR: brown-out reset
PVD: power voltage detector
MPU: memory protection unit
CEC: consumer electronic control
ETM: Embedded Trace Macrocell
2
STM32 F3 series
32-bit MCUs with DSP instructions and FPU plus optimum analog integration to complement STM32 F1 and F4 series
The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost. The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration. The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices. The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.
STM32 F3 PRODUCT LINESBoth product lines include:
Cortex-M4 + FPUFmax = 72 MHz
MPUPLL
Low and high speed internal oscillators
2x watchdogs + RTC(real-time clock)
HW CRCReset circuitry
POR/PDR
Multiple DMACommunication
peripheralsUSART, SPI, I²C
Multiple 16-bit timers1x 32-bit timer
Temperature sensorBackup registers
ETMReset + BOR PVD
STM32F372/373/383 lines
Up to 256-Kbyte
Flash
3x DAC12-bit
2x comparator
1x 12-bitADC
1 MSPS SAR
Up to 32-Kbyte
SRAM
3x 16-bit Σ∆ ADC CEC CAN
2.0BUSB
2.0 FS
STM32F302/303/313 lines
Up to 256-Kbyte
Flash
2x16-bitAMCtimer
2x DAC12-bit
7x comparator
4x 12-bitADC
5 MSPS SAR
Up to 40-Kbyte
SRAM
8-Kbyte code SRAM
4x PGA CAN 2.0B
USB2.0 FS
Abbreviations:
FS: full speed
AMC: advanced motor control
SDIO: secure digital input/output
FPU: floating point unit
DSC: digital signal controller
SAR: successive approximation register
BOR: brown-out reset
PVD: power voltage detector
MPU: memory protection unit
CEC: consumer electronic control
ETM: Embedded Trace Macrocell
BOTH PRODUCT LINES INCLUDE:
90V AC to305V AC
VOUT
VINVIN_SENSE
GATE
SENSEGND
FB
OPTO
You Can Do Offline Power
Info & Free Samples
The LT®3798 is a general purpose isolated offline flyback controller that combines active power factor correction (PFC) with no optocoupler required for output voltage feedback into a single-stage converter. The device modulates input current in phase with line voltage to attain a PF greater than 0.97. It has both a voltage and current loop so it can provide a constant current or constant voltage (CCCV) output. Its internal architecture provides low harmonic distortion and delivers efficiencies as high as 90%.
www.linear.com/product/LT3798
1-800-4-LINEAR
LT3798 Demo Board(4.45” x 1.75” x 1.25”)
Output Regulation
Simple AC/DC Conversion with Active Power Factor Correction
, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.
LOAD (A)
0
V OUT
(V) 23
24
25
22
21
200.25 0.5 0.75 1 1.25 1.5 1.75 2
120VIN240VIN
video.linear.com/99
VIN = 90V AC to 265V ACVOUT = 24V, IOUT = 2A
17
PO
WE
R M
AN
AG
EM
EN
T
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
LTC4370 — Two-Supply Diode-ORCurrent Balancing ControllerFirst-of-its-kind current-sharing controller with reverse current blocking — eases design of reliable power systems
The LTC®4370 is a two-supply current sharing controller which incorporates
MOSFET ideal diodes. The diodes block reverse and shoot-through currents during
start-up and fault conditions. Their forward voltage is adjusted to share the load
currents between supplies. Unlike other sharing methods, neither a share bus nor
trim pins on the supply are required.
The maximum MOSFET voltage drop can be set with a resistor. A fast gate
turn-on reduces the load voltage droop during supply switchover. If the input supply
fails or is shorted, a fast turn-off minimizes reverse current transients.
The controller operates with supplies from 2.9V to 18V. For lower rail voltages,
an external supply is needed at the VCC pin. Enable inputs can be used to turn off
the MOSFET and put the controller in a low current state. Status outputs indicate
whether the MOSFETs are on or off. The load sharing function can be disabled to
turn the LTC4370 into a dual ideal diode controller.
FEATURES:
Shares Load Between Two Supplies
Eliminates Need for Active Control of Input Supplies
No Share Bus Required
Blocks Reverse Current
No Shoot-Through Current During Start-Up or Faults
0V to 18V High Side Operation
Enable Inputs
MOSFET On Status Outputs
Dual Ideal Diode Mode
16-Lead DFN (4mm × 3mm) and MSOP Packages
APPLICATIONS:
Redundant Power Supplies
High Availability Systems and Servers
Telecom and Network Infrastructure
Scan barcode for more LT4370 information
12V, 10A Load Share Current Sharing Error vs Supply Difference
SUM85N03-06P
*OPTIONAL, FOR FAST TURN-ON
SUM85N03-06P
GATE1CPO1
CPO2
GND
EN1
EN2
RANGE
VINA12V
VINB12V
0.1µF
NC
OUT12V, 10A
39nF*
39nF*
VIN1
VCCFETON1
COMP
FETON2
OUT1
OUT2
GATE2VIN2
LTC43702mΩ
2mΩ
0.18µF
VINA – VINB (mV)–750
–20
SHAR
ING
ERRO
R (I V
INA
– I V
INB)
/IL
(%)
–10
0
10
0 052052–005– 500
20
–15
–5
5
15
750
12V, 10A Load Share Current Sharing Error vs Supply Difference
SUM85N03-06P
*OPTIONAL, FOR FAST TURN-ON
SUM85N03-06P
GATE1CPO1
CPO2
GND
EN1
EN2
RANGE
VINA12V
VINB12V
0.1µF
NC
OUT12V, 10A
39nF*
39nF*
VIN1
VCCFETON1
COMP
FETON2
OUT1
OUT2
GATE2VIN2
LTC43702mΩ
2mΩ
0.18µF
VINA – VINB (mV)–750
–20
SHAR
ING
ERRO
R (I V
INA
– I V
INB)
/IL
(%)
–10
0
10
0 052052–005– 500
20
–15
–5
5
15
750
LTC3626 – 20V, 2.5A SynchronousMonolithic Step-Down Regulator with Current and Temperature Monitoring The LTC®3626 is a high effi ciency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of supplying up to 2.5A of output current. The operating supply voltage range is 3.6V to 20V, making it suitable for a wide range of power supply applications.
The operating frequency is programmable from 500kHz to 3MHz with an external resistor allowing the use of small surface mount inductors. For applications sensitive to switching noise, the LTC3626 can be externally synchronized over the same frequency range. An internal phaselocked loop aligns the on-time of the top power MOSFET to the internal or external clock. This unique controlled on-time architecture is ideal for high step-down ratio applications that demand high switching frequencies and fast transient response. An internal phase lock loop servos the on-time of the internal one-shot timer to match the frequency of the internal clock or an applied external clock.
The LTC3626 offers two operational modes: Burst Mode and forced continuous mode to allow the user to optimize output voltage ripple, noise and light load effi ciency for a given application.
FEATURES:
3.6V to 20V Input Voltage Range
Wide Output Voltage Range of 0.6V to 97% VIN Optimized for 0.6V to 6V
Low RDS(ON) Integrated Switches Provide Up to 95% Effi ciency
Up to 2.5A of Output Current
Average Input and Output Current Monitoring
Programmable Average Input/Output Current Limit
Die Temperature Monitor and Programmable Limit
Adjustable Switching Frequency: 500kHz to 3MHz
External Frequency Synchronization
Current Mode Operation for Excellent Line and Load Transient Response
0.6V Reference with 1% Accuracy Over Temperature
User Selectable Burst Mode® or Forced Continuous Operation
Short-Circuit Protected
Output Voltage Tracking Capability
Power Good Status Output
Available in Small, Thermally Enhanced, 20-Lead (3mm × 4mm) QFN Package
APPLICATIONS:
Distributed Power Systems
Battery-Powered Instruments
Point-of-Load Power Supply
PO
WE
R M
AN
AG
EM
EN
T
18
Scan barcode for moreLTC3626 information
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
3626f
PVINSVINRUN BOOST
SW
VON
FB
PGOODINTVCCTRACK/SSITHMODE/SYNCTSETIMONINTMONIMONOUT
SGND PGND
LTC3626
47µF
47µF
VOUT3.3V2.5A
VIN3.6V TO 20V
5.1k1µF
2.2µF
0.1µF
22pF
2.2µH
115k
25.5k324k
RT
Efficiency vs Load Current
LOAD CURRENT (mA)
30
EFFI
CIEN
CY (%
)
POWER LOSS (W
)
90
100
20
10
80
50
70
60
40
1 100 1000 100000
0.01
10
1
0.1
0.00110
Burst ModeOPERATION
VIN = 12VVIN = 5V
VOUT = 3.3V
PO
WE
R S
UP
PL
IES
20
Scan barcode for more XL330-54 CS product information
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Ultra small, high effi ciency dual-output AC-DC power supplyThe XL330-54 CS delivers a power density over 15 watts per cubicinch. With an overall height of 1.35" and a 3" x 5.3" footprint, it is ideally suited for OEMs using the industry standard 1U chassis.
FEATURES:
330 W AC-DCc /3” x 5.3” Footprint
Available model: 54V / 12V
Up to 90% effi ciency
High power density: over 15 W/in3
All outputs may be paralleled
Remote on /off
5V standby output (1A)
12V aux output (1A)
Universal AC input
Active PFC (90 – 264 Vac)
Active current sharing for n, n+1
Active inrush current limiter
RoHS compliant
BENEFITS:
High density frees real estate in OEM designs
High MTBF for greater reliability
High effi ency means less heat, lower cooling required
Active current sharing allows higher power capacity
Active inrush protection eliminates overcurrent failures
APPLICATIONS:
Telecom
Networking
Test equipment
Gaming systems
Lighting systems
Industrial
N2Power leads the power density race with its high effi ciency XL330-54 CS AC-DC dual-output power supply. Our advanced technology yields a very small footprint, reduces wasted power, and offers the highest power density in its class. This effi cient design means reduced energy costs, a greater return on your investment, greater reliability and longer product life.
The XL330-54 CS provides up to 90% effi ciency. Our unique design reduces energy consumption and generates less wasted heat. It requires little forced air cooling, decreases AC power consumption, increases reliability and economy of operation. Comparisons of effi ciencies show that our supplies can reduce losses up to 25%.
The main output is enabled whenever all of the required startup conditions are met, and is shut down upon command, loss of input power or whenever excessive loads or temperatures are sensed. When AC input power is lost it provides the host system with advanced warning of an impending shutdown.
TYPICAL MECHANICAL DRAWING:Inches (millimeters)
Screws shown for reference onlyLock washer
Printed Circuit Board
5.30(134.6)
4.55(115.6)
2.55(64.8)
3.00(76.2)
1.35(34.3)
1.10(27.9)
0.06(1.5)
0.19(4.8)
XL330-54 CSHeight = 1.35 (34.3)
Safety ground connection pointat plated through hole
.375(9.53)
.225(5.71)
J2
J4
J3
Pin 1Pin 1
Pin 1J1
Pin 1
Safety ground connection pointat plated through hole
21
SE
NS
OR
S
APPLICATIONS:
Targeted for the industrial, appliance, and automotive markets Motor and pump control in white goods applications Short circuit and overpower detection in audio applications Lighting applications General power supply monitoring Many industrial motors are powered off of 24 V rails ― the ACS711 would
be an excellent high side sensor in these applications
The Allegro ACS711 provides economical and precise solutions for AC or DC current sensing in low-side or high side applications less than 100 VDC sensing applications.
The device consists of a linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer and factory programming at Allegro. The output of the device has a positive slope proportional to the current flow from IP+ to IP- (pins 1 and 2, to pins 3 and 4). The internal resistance of this conductive path is only 0.6 mΩ with proper PCB design as given in the datasheet.
The ACS711 can be used in low-side current sensing applications, although the terminals of the conductive path are electrically isolated from the sensor leads (pins 5 through 8), providing sufficient internal creepage and clearance dimensions for a low AC or DC working voltage application. The thickness of the copper conductor allows survival of the device beyond 30 Amps depending on the ambient temperature.
Scan barcode for more information onAllegro's Integrated Current Sensor ICs
Introducing Allegro's Smallest Integrated Current Sensor ICDesigned for high and low side sensing applications, this new micro sized device is possibly the smallest fully integrated linear current sensor IC in the world!
FEATURES: BENEFITS:
Extremely small 3 x 3 mm footprint QFN package offering Small PCB area
Integrated 0.6 mm conductor Eliminates the need for an external sense resistor and offers lower power dissipation than higher resistance sense resistor solutions
Output voltage proportional to AC or DC currents
±15 A and ±30 A full scale sensing ranges
Overcurrent fault pin trips and latches at 100% of full scale current Suitable for over current protection applications
Low-noise analog signal path Improved sensing resolution
100 kHz signal bandwidth Used for higher speed switching applications
3.3 V, single supply operation Compatible with 3.3 V microprocessors
Integrated electrostatic shield Virtually eliminates transient coupling from conductor to output
Factory-trimmed for accuracy
Extremely stable output offset voltage chopper stabilized internal amplifiers
Nearly zero magnetic hysteresis, coreless design Improves accuracy and resolution
Ratiometric output from supply voltage
SE
NS
OR
S
22 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Scan barcode for more L3GD20 and L3G4IS information
3-Axis Digital Gyroscopes for Enhanced Motion-Control Realism and Image StabilizationST’s new 3-axis digital gyroscopes are the perfect synthesis of accuracy and design flexibility
ST’s latest gyroscopes feature excellent accuracy as
a result of their unique and patented mechanical structure
based on a single driving mass. The L3GD20 and L3G4IS boast
superior output stability over time and temperature, removing
the need for any further calibration on the customer‘s side. They
offer user-selectable full scales, ranging from ± 65 to ±2000
dps, to cater for gaming, navigation, and OIS applications.
L3GD20 FEATURES:
Three selectable full scales (±250/500/2000 dps)
20+ kHz resonant frequency over the audio bandwidth
I2C/SPI digital output interface
16-bit rate data output
8-bit temperature data output
Wide supply voltage: 2.4 to 3.6 V
Low-voltage compatible IOs (1.8 V)
Embedded FIFO
Embedded power-down and sleep modes
Embedded temperature sensor
High shock survivability
L3G4IS FEATURES:
Dual-core gyroscope for UI and OIS
Dedicated digital interface (SPI) and full-scale of ±65 dps for OIS applications
Dedicated digital interface (I2C) and full-scale ±250 dps up to ± 2000 dps for gaming
Embedded FIFO
Power-down/sleep mode for smart power saving
Embedded temperature sensor
L3GD20 BENEFITS:
Design flexibility
Resonant frequency outside the audio bandwidth to strengthen immunity to audio noise and mechanical vibration coupled through the PCB
Extremely low power consumption lengthens battery life
Embedded FIFO for smart data storage and power saving
Temperature detection for advanced thermal drift compensation
L3G4IS BENEFITS:
First two-in-one gyroscope that can simultaneously handle user-motion recognition and camera image stabilization
Enables more reliable performance, sleeker form factors and lower costs in motion-sensitive phones, tablets and other smart consumer devices
Addresses power constraints in batteryoperated portable devices, with powerdown/ sleep modes and an embedded FIFO memory block
DEVICE SUMMARY:
Features L3GD20 L3G4IS
Angular rate range (FS) typ (dps) ±250/500/2000±65 (OIS)
±250/500/2000 (UI)
Driving frequency (kHz) 20+ 20+
Angular rate noise density (°/s/ √ Hz) 0.030.008 (OIS)0.015 (UI)
ODR (Hz) 95, 190, 380, 7609.5 (OIS)
95, 190, 380, 760 (UI)
Programmable interrupts 2 2
Embedded FIFO √ √
Current consumption typ (mA) 69 (OIS)6.5 (UI)
Supply voltage range (V) 2.4 to 3.63.0 to 3.6 (OIS) 2.4 to 3.6 (UI)
Operating temperature range (°C) -40 to +85 -30 to +85
ApplicationsGaming, pointing devices
and navigationOptical image stabilization
(OIS) and user interfaces (UI)
Digital interfaces I2C/SPI I2C/SPI
Size (mm) 4 x 4 x 1 4 x 4 x 1
23
SIG
NA
L C
ON
DIT
ION
ING
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
High Power TVS for Ethernet Interfaces3.3V, 4-line TVS Array with High Surge Immunity Ideal for Protecting Ethernet PHYs
RailClamp® TVS diodes are specifi cally designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (cable discharge events), and EFT (electrical fast transients).
The unique design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. The RClamp®3374N is designed to replace up to two components for board level GbE protection. Each device is designed to protect two line pairs. This is accomplished by routing traces through the device. When connected in this fashion, the device can withstand a high level of surge current (40A, 8/20us) while maintaining a low loading capacitance of less than 5pF. The high surge capability means it can be used in high threat environments in applications such as Gigabit Ethernet, telecommunication lines, and LVDS interfaces. The RClamp3374N is constructed using Semtech’s proprietary EPD process technology. The EPD process provides low stand-off voltages with signifi cant reductions in leakage current and capacitance over silicon-avalanche diode processes. It features a true operating voltage of 3.3 volts for superior protection.
Scan barcode for more RClamp®3374N information
APPLICATIONS:
10/100/1000 Ethernet Automotive Central Offi ce Equipment LVDS Interfaces MagJacks / Integrated Magnetics Notebooks / Desktops / Servers
MECHANICAL CHARACTERISTICS:
SLP3020N10 10L package Pb-Free, Halogen Free, RoHS/WEEE Compliant Nominal Dimensions: 3.0 x 2.0 x 0.60 mm Lead Finish: NiPdAu Molding compound fl ammability rating: UL 94V-0
FEATURES: BENEFITS:
Low operating voltage: 3.3V Allows the TVS device to avalanche quickly during a transient
Low clamping voltage Ensures that even the most transient sensitive PHYs are safeguarded
Transient Protection for high-speed data lines to: IEC 61000-4-2 (ESD) ±30kV (air), ±30kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 40A (8/20μs)
Ensures that PHYs are safeguarding in a harsh transient environment
Low capacitance: 1.7pF typical, line-to-line Ensures that signal integrity is maintained over long cable reaches
Flow through package Helps facilitate a more favorable layout, allowing traces to stay on one board layer
0
5
10
15
20
25
30
35
40
0 10 20 30 40 50 60
Clam
pign
g Vo
ltage
(V)
8x20µs Surge Current (A)
RClamp3374N Clamping Voltage Performance
RClamp3374N
Competor A
SY
ST
EM
MO
NIT
OR
ING
24 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
FEATURES:
Superior SHA-256 NIST-approved algorithm
Multi-level hardware security
Secure authentication and key exchange
High-quality hardware random number generator (RNG)
Guaranteed unique serial number
Single-wire and I2C interface options
Secure personalization
Green-compliant plastic packages
BENEFITS:
Authenticates peripherals
Protects confi dential information
Secures communications
Prevents overbuilds, clones, or any illegitimate uses
Tracks and controls manufacturing
Controls licensing agreements
Complete security solution with one device
Easy to integrate
Insures reliable system operation
Protects revenue
Protects brand valueAPPLICATIONS:
Medical
Industrial Automation
Consumer Devices
Metering
Consumables
Scan barcode for more ATSHA204 information
Atmel CryptoAuthentication™ ATSHA204Secure authentication technology to secure your design investment, revenue, and brand value
The Atmel ATSHA204 is the fi rst CryptoAuthentication product to integrate the SHA-256 hash algorithm
with a 4.5Kb EEPROM, providing robust and cost-effective hardware authentication and secure key/data
storage. Features such as small outline plastic packages and a single-wire interface make the ATSHA204
ideal for handheld electronic systems or any space-constrained embedded system.
Implementing host-side security to provide a full system solution is now easier than ever. The ATSHA204
includes a client and host security capability that offl oads key storage and the execution algorithms from the
host microcontroller, signifi cantly reducing both system cost and complexity. When using the Atmel ATSHA204
on the host, you no longer need to worry about writing crypto algorithms or developing crypto protocols for
your systems.
CryptoAuthentication has been architected to provide fl exible user-confi gured security to enable a wide range of authentication models, and is easy
and timely to design in with no crypto expertise required. The ATSHA204 incorporates the latest security features developed from a long history of security IC
design expertise. The devices have full metal shields over the entire internal circuitry as well as internal clocks and voltage generation, encrypted memories,
tamper detection and fully secure production test methods.
Atmel CryptoAuthentication ATSHA204 gives designers the capability to cost-effectively authenticate component accessories and consumables, protect
software/fi rmware from piracy, and enable secure boot methods, all aimed at protecting corporate revenue, brand value, and limiting liability exposure.
25
Audi
o AD
C
Anal
og to
Dig
ital C
onve
rter
Mat
rixAK
M
Bits
ADCs
Inte
rfac
eAu
dio
Freq
uenc
y (K
Hz)
I2C
3 w
ireUS
BTD
MHW
4896
192
216
16si
ngle
dual
quad
20du
al
24du
al
quad
Gene
ral P
urpo
se A
DC
Exar
Bits
ADCs
Spee
d (s
ampl
es p
er s
econ
d- s
ps)
7.5
1530
6032
01K
4K8K
200K
450K
800K
1M1.
6M2.
8M3.
5M6M
10M
15M
25M
40M
65M
80M
105M
150M
185M
210M
250M
310M
10du
al
8si
ngle
LTC
24si
ngle
dual
quad
octa
l
sixt
een
20si
ngle
dual
quad
octa
l
18si
ngle
16si
ngle
dual
octa
l
sixt
een
14si
ngle
dual
quad
octa
l
12si
ngle
dual
quad
octa
l
10si
ngle
dual
8si
ngle
dual
Nuvo
ton
24si
ngle
dual
ST M
icro
12du
al
26
Audi
o DA
C
Digi
tal t
o An
alog
Con
vert
er
Mat
rix
AK
M
Bits
DACs
Outp
utIn
terf
ace
Audi
o Fr
eque
ncy
Sing
leDi
ffere
ntia
lI2 C
Para
llel
3 W
ireKH
z
24du
al
48-1
92
six
19
2
octa
l
192
32du
al
19
2 -
216
Gene
ral P
urpo
se D
AC
Exar
Bits
DACs
Outp
utIn
terf
ace
Settl
ing
Tim
e
Curr
ent
Volta
geSP
II2
CPa
ralle
l3
Wire
Puls
euS
8si
ngle
13
10si
ngle
13
12si
ngle
13
LTC
6du
al
NA
8
sing
le
3.2
dual
3.4-
3.5
quad
3.
3-3.
5
octa
l
3.4-
30
10
sing
le
3.
8-30
dual
3.
9-75
0
quad
3.
3-19
octa
l
3.4-
30
12
sing
le
0.02
-14
dual
1.
5-14
quad
2.
0-14
octa
l
3.4-
10
14
sing
le
0.02
-12
dual
2.
0-9
quad
3.
5-9
octa
l
9.0-
10
16
sing
le
0.02
-20
dual
2.
0-10
quad
2.
0-10
octa
l
4.9-
10
18si
ngle
2.
1
dual
2.
1
27
Gene
ral P
urpo
se D
AC
Exar
Bits
DACs
Outp
utIn
terf
ace
Settl
ing
Tim
e
Curr
ent
Volta
geSP
II2
CPa
ralle
l3
Wire
Puls
euS
8si
ngle
13
10si
ngle
13
12si
ngle
13
LTC
6du
al
NA
8
sing
le
3.2
dual
3.4-
3.5
quad
3.
3-3.
5
octa
l
3.4-
30
10
sing
le
3.
8-30
dual
3.
9-75
0
quad
3.
3-19
octa
l
3.4-
30
12
sing
le
0.02
-14
dual
1.
5-14
quad
2.
0-14
octa
l
3.4-
10
14
sing
le
0.02
-12
dual
2.
0-9
quad
3.
5-9
octa
l
9.0-
10
16
sing
le
0.02
-20
dual
2.
0-10
quad
2.
0-10
octa
l
4.9-
10
18si
ngle
2.
1
dual
2.
1
Disp
lay
Mat
rix
Thin
fi lm
tran
sist
or li
quid
cry
stal
dis
play
(TFT
-LCD
) is
a va
riant
of l
iqui
d cr
ysta
l dis
play
(LCD
) whi
ch u
ses
thin
-fi lm
tran
sist
or (T
FT) t
echn
olog
y to
im
prov
e im
age
qual
ity (e
.g.,
addr
essa
bilit
y, co
ntra
st).
TFT
LCD
is o
ne ty
pe o
f ac
tive
mat
rix L
CD, t
houg
h al
l LCD
-scr
eens
are
bas
ed o
n TF
T ac
tive
mat
rix
addr
essi
ng.
An o
rgan
ic li
ght e
mitt
ing
diod
e (O
LED)
is
a lig
ht-e
mitt
ing
diod
e (L
ED) i
n w
hich
the
emis
sive
ele
ctro
lum
ines
cent
laye
r is
a fi l
m
of o
rgan
ic c
ompo
unds
whi
ch e
mit
light
in
resp
onse
to a
n el
ectri
c cu
rren
t.
A su
per-
twis
ted
nem
atic
dis
play
(STN
) is
a ty
pe o
f mon
ochr
ome
pass
ive
mat
rix li
quid
cr
ysta
l dis
play
(LCD
). ST
N di
spla
ys p
rovi
de
mor
e co
ntra
st th
an tw
iste
d ne
mat
ic (T
N)
disp
lays
by
twis
ting
the
mol
ecul
es fr
om
180
to 2
70 d
egre
es.
E-Pa
per d
ispl
ays
use
posi
tive
and
nega
tive
char
ged
pigm
ent c
hips
(in
both
whi
te a
nd
blac
k) to
cre
ate
an e
lect
roni
c ve
rsio
n of
pr
inte
d pa
per.
Supp
lier/
Tech
nolo
gyTF
TOL
EDST
NE-
Pape
r
Colo
rCh
arac
ter
Grap
hic
Colo
rGr
aphi
cCh
arac
ter
Colo
rCh
arac
ter
Grap
hic
Mon
ochr
ome
Samsung + LED Lighting + Nu Horizons =
Innovative Lighting Solutions
LED Lighting Solutionsfrom
Samsung is committed to leading the LED lighting revolution, and Nu Horizons is committed to delivering the right solution to meet your LED project needs.
Mid-power white LEDs
High-power white LEDs
High-voltage white AC LEDs
High-voltage white DC LEDs
Light Engines and Modules
LED Tube
Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting or scan the
QR code below with your smart phone.
Design Custom LED Assembly
29
LED Components: Low power HV AC Mid power HV DC High power Flash LED
Optics: Lenses Standard products Refl ectors Custom solutions Development & deployment of new fi xtures
Light Engines: LED street light LED area light LED down light LED light strip
Thermal Management: Thermal testing Thermal management
LED Drivers Inductorless white LED drivers (for LEDs in parallel) Switching regulator based white LED drivers (for LEDs in series) Integrated Schottky diodes Accurate LED current matching Multiple output capability Topologies - Constant current source - Dimmable current source - Flyback - Boost (step-up) - Buck (Step Down) - LLC resonant topologies - SEPIC topology
Power Solutions Fully assembled and tested power solution Ruggedized products End to end solutions - AC/DC - DC/DC 6W to 320W Norms - UL1310 Class 2, UL8750, EN61347-2-13, EN61000-3-2 Class C (harmonic current) and IP64~67
System Design Nu Horizons LED Lighting Solutions - One stop solution for all your solid state lighting needs - Design - Custom LED - Assembly
S U P P L I E R N A M E S LEDs
LED
Driv
ers
Ligh
t Eng
ines
Optic
s
Pow
er S
olut
ions
Syst
em D
esig
n
Ther
mal
Man
agem
ent
Active-Semi
Allegro MicroSystems
Atmel
Endicott Research Group, Inc. (ERG)
Exar
Excelsys Technologies
GE Energy (formerly Lineage Power)
Integrated Silicon Solution, Inc. (ISSI)
IXYS (includes Clare)
LEDIL
LED Specialists
LHV Power
Linear Technology
Marvell
Mean Well
Micrel
Microsemi
N2Power
Nu Horizons LED Lighting Solutions
OPTO Electronix
Samsung LED
Sharp Microelectronics of the Americas
STMicroelectronics
Supertex
Telefunken Semiconductors
LIGHTING | SUPPLIERS BY PRODUCT CATEGORY
3030
Active Enhancements: Hi Bright Backlights (CCFL, LED)
Design Services: System Hardware & Compatibility Product Specifi cation Custom Test Set-up POC / Prototype First Article Revision Control (ECN) Engineering Evaluation Problem Resolution
Display Technologies: LCD - Active, Passive - Graphic - Color, Monochrome - Character - 3D EPD - e-Paper, e-Ink OLED - Organic Light Emitting Diode PID - Public Information Display, Signage Memory LCD
Passive Enhancements: Anti-Refl ective Anti Glare Glass / Acrylic EMI/RFI Shielding IR Blocking Film Optical Bonding Privacy Filters Protective Display Shields
Total Solutions: Display Kit Verifi cation Fully Enclosed LCD Monitors Fully Enclosed LCD Systems (Panel PC’s) LCD Testing and Screening Medical NEMA Rated Products Open Frame Confi gurations Rack and Panel Mount Assemblies
Touch Screen Integration: Capacitive Surface Acoustic Wave (SAW) IR - Infrared Touch Projected Capacitive - Extreme-Touch Resistive - 4/5/8 Wire Touch Controllers / Serial USB
Value-Add Capabilities: Class 1,000 Clean Room for all LCD Enhancements Display Inspection NVIS Night Vision Optical Glass Bonding Touch Screen Integration Functional Testing: - Power Cycling - Elevated Temperature Test - Video Testing / Calibration - Flat Panel - Pixel Screen - Extended Burn-in - Custom Test Creation / Execution - Touch Screen Calibration
DISPLAYS | SUPPLIERS BY PRODUCT CATEGORY
S U P P L I E R N A M E S Cabl
e So
lutio
ns
Disp
lays
Embe
dded
Sol
utio
ns /
Sing
le B
oard
Com
pute
rs
Inve
rter
s
LCD
Cont
rolle
r Sol
utio
ns
LCD
Mon
itors
Open
Fra
me
/ Pa
nel P
C So
lutio
ns
Touc
hscr
eens
AAEON
Amulet Technologies
Applied Concepts
Axiomtek
Connect Tech
Digi International
Digital View
Emerging Display Technologies (EDT)
Endicott Research Group, Inc. (ERG)
Estecom-USA
HanTouch USA
IEI Technology Corp.
In Touch Electronics
Kordis Media Co., Ltd.
Kyocera Display America, Inc. (formerly Optrex)
Landmark Technology
Lattice Semiconductor
Leopard Imaging
LG Display
Microsemi
NLT Technologies
Nu Horizons Custom Solutions
OSD Displays
Pervasive Displays
Pixel Qi
Quadrangle Products Inc.
Reach Technology Inc.
Sharp Microelectronics of the Americas
Tianma
Touch International
Touch Revolution
T E C H N O L O G Y I N C .
EMBEDDED SOLUTIONS / SINGLE BOARD COMPUTERS | AVAILABLE FROM NU HORIZONS
Offering Embedded Computing Platforms so that
customers have a single, reliable, cost-effective source
to a wide array of CE, FCC & UL certifi ed products.
These products include single board computers,
embedded systems and barebone systems, panel
computers, medical PC, human machine interfaces, and
network security appliances.
T E C H N O L O G Y I N C .
Supported Markets Medical
Military
Heavy Industrial
Consumer
Gaming & Entertainment
Point of Sale
Telecom
Supported Processors Intel
VIA
Xscale
Marvell
AMD
System on Module ETX
STX
Q7
COM EXPRESS
XTX
SOM Baseboards
Industrial Motherboards Mini ITX
Micro ATX
ATX
Embedded SBC Pico ITX
3.5” Capa Boards
EPIC
5.25 Boards
RISC CPU Modules
PC104
Servers Sun Micro
Super Micro
IBM
Panel PC/POS Solutions Medical Grade Touchscreen Computers
Industrial Monitors
Digital Signage
Video Wall Controllers
Heavy Industrial Monitors
Rack Consol
RISC Based monitor
Peripherals Memory (Flash, DDR, DDR2, DDR3)
Heatsink/Fan Assemblies
MiniPCI Module
SA/PCI/PCI-X riser cards
I/O cables
LCD wiring kits
Compact Flash
HDD Drives
Add on Cards LCD converter
FPGA
Video Capture
PCI-Express cards
PC104 I/O Modules
Wireless
RFID
Wireless Radio Modems
CAN Controllers
Chassis 1U to 6U
Shoe Box
Rackmount
Compact
Embedded
Power Solutions DC/DC
Open Frame
1U/2U Power supply
UPS Module
AC/DC
Software Microsoft, Linux Support
Technical Resources / Customization Resources Sheet Metail
Industrial Design
Silk Screening
Custom Enclosures
31
DISPLAYS | SUPPLIERS BY PRODUCT CATEGORY
32
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
EEmbedded Single Board Computers, Panel Appliance & Automation Solutions, Industrial System Solutions
S
Power Application Controllers (PAC), Power Management Units, DC/DC and AC/DC Converters, LED Controllers
S CBRAM (Conductive Bridging RAM), Serial Flash
SDigital Audio, Video, Sensor Products, Communications, Clock Devices, Power Devices
LS
Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting
DE Graphical OS Chips, Display Modules, Boards
SDynamically Programmed Analog Signal Processors (dpASP’s), Field Programmable Analog Array’s (FPAA’s)
SLWireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications
DCCFL and EEFL Inverters, LED Display Products, Passive Display Enhancements
LS
Microcontrollers, Touch, Memory, Automotive, Wireless / RF
DE
Embedded Board & SoM, Applied Computer & Network Device, Touch Panel Computer
S
RF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs
SLSystem on a Module, ARM9/11, Cortex, Marvell ARM, PowerPC, Renesas SH, MIPS
SAudio, Imaging Solutions, Video Surveillance, Dial-Up/Embedded Modems
SLBluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories
EPC/104, PC/104-Plus, PCI/104-Express, PCI, PCI Express, CompactPCI and ISA, Digital I/O, Ethernet-to-Serial Devices
DES
Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces
SL IP Cores and System-on-Chip Solutions
D LCD Controllers
DCSTN Modules, TFT Modules, Graphic Modules, Character Modules, Capacitive Touch
P AC Power, DC Power, Embedded Power
DL
CCFL Inverters, Smart Force™ DR, Smart Force™ CCFL, Smart Force™ LED, Smart Force™ EL, Smart Kits, DC Converters
S
ASICs, Display ICs, Interface, Microcontrollers, Network Camera, Network Control, Power Supply ICs, Print-Head ICs, Timing Products
DLCD Controller Solutions, Intelligent Panels, Digital Signage Monitors
LS Communications, Networking, Storage, Interface, Power
P High-efficiency, Low-profile Power Supplies
S Optical Components, Optical Modules
LP
AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies
SVideo Transport, Optical Modules, Signal Integrity (also see Semtech)
D4 Wire and 5 Wire Analog Resistive, SAW (Surface Acoustic Wave) Touch Screens
SL 802.11 Wi-Fi Modules
SL Development Tools for Embedded Systems
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
Nu-Horizons-Electronics-Americas-Linecard-Winter-2013.indd 4 1/15/2013 4:00:03 PM
33
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
EEmbedded Single Board Computers, Panel Appliance & Automation Solutions, Industrial System Solutions
S
Power Application Controllers (PAC), Power Management Units, DC/DC and AC/DC Converters, LED Controllers
S CBRAM (Conductive Bridging RAM), Serial Flash
SDigital Audio, Video, Sensor Products, Communications, Clock Devices, Power Devices
LS
Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting
DE Graphical OS Chips, Display Modules, Boards
SDynamically Programmed Analog Signal Processors (dpASP’s), Field Programmable Analog Array’s (FPAA’s)
SLWireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications
DCCFL and EEFL Inverters, LED Display Products, Passive Display Enhancements
LS
Microcontrollers, Touch, Memory, Automotive, Wireless / RF
DE
Embedded Board & SoM, Applied Computer & Network Device, Touch Panel Computer
S
RF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs
SLSystem on a Module, ARM9/11, Cortex, Marvell ARM, PowerPC, Renesas SH, MIPS
SAudio, Imaging Solutions, Video Surveillance, Dial-Up/Embedded Modems
SLBluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories
EPC/104, PC/104-Plus, PCI/104-Express, PCI, PCI Express, CompactPCI and ISA, Digital I/O, Ethernet-to-Serial Devices
DES
Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces
SL IP Cores and System-on-Chip Solutions
D LCD Controllers
DCSTN Modules, TFT Modules, Graphic Modules, Character Modules, Capacitive Touch
P AC Power, DC Power, Embedded Power
DL
CCFL Inverters, Smart Force™ DR, Smart Force™ CCFL, Smart Force™ LED, Smart Force™ EL, Smart Kits, DC Converters
S
ASICs, Display ICs, Interface, Microcontrollers, Network Camera, Network Control, Power Supply ICs, Print-Head ICs, Timing Products
DLCD Controller Solutions, Intelligent Panels, Digital Signage Monitors
LS Communications, Networking, Storage, Interface, Power
P High-efficiency, Low-profile Power Supplies
S Optical Components, Optical Modules
LP
AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies
SVideo Transport, Optical Modules, Signal Integrity (also see Semtech)
D4 Wire and 5 Wire Analog Resistive, SAW (Surface Acoustic Wave) Touch Screens
SL 802.11 Wi-Fi Modules
SL Development Tools for Embedded Systems
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
Nu-Horizons-Electronics-Americas-Linecard-Winter-2013.indd 4 1/15/2013 4:00:03 PM
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
SLHigh-performance Video Extension and USB Extension Solutions
DE Embedded System, Single Board Computers
DTFT/AMOLED Displays, Integrated Touch Screens, High-Bright Displays
LS
DRAM and SRAM Memory, Audio Drivers, Multi-function IO Drivers, LED Drivers, Temperature Sensors
LS
ASICs, Display Products, High Voltage Devices, ICs, Laser Diode Drivers, Optocouplers, Power Products, Pulsed Power Systems, RF Power & Systems, Solar Power Products, Solid State Relays, Telecom Products
D Panels, Display Controllers, Inverters and Adapters
D
TFT LCDs, TFT LCD with LED, Touch Screen Solutions, Color Graphic LCDs, Monochrome Graphic LCDs, Character LCDs
DHigh Brightness LCD Modules, Inverters and Open Frame Industrial Monitors
S
Communications, Microcontrollers, Audio/Speech, Security, Video, DRAM, Display Drivers, Sensors, Optical Components
ES
Programmable Clock Devices, Programmable Power Manager Devices, Programmable Logic
L Semiconductor Optical Solutions
LLED Light Engines, Drivers, Modules and Design Services
ESL
Embedded High Definition Camera Design, Digital Video Camera Development, Digital PC Camera Development and High Definition Surveillance System Development
D TFT LCDs, AMOLED, EPD, 3D Displays
LP
High Voltage Power Supplies, Low Voltage Power Supplies
LS
Data Conversion, Signal Conditioning, Power Management, Interface, High Frequency & Optical, Timing
AMERICAS SUPPLIER LISTING
SVideo Encoders, Transcoders, Decoders, SoCs, Coprocessors
SLHigh-end Optical Imaging Lenses for Industrial, Video & Security Industries
LS
Processors, Storage, Wireless, Switching, Digital Entertainment, Broadband, PC Connectivity, Transceivers, System Controllers, Powerline Communications
LP AC/DC Power Supplies, DC/DC Power Supplies
LS Analog, High Bandwidth, Ethernet, RF Solutions
S
8, 16, 32-bit MCUs, Amplifiers, Comparators, Data Converters, Interface Devices, EEPROM, SRAM, Serial and Parallel FLASH, Motor Drivers, Power Management, RTCs, Temperature Management, Touch and Input Sensing, Wireless, Automotive, PC System and I/O Controllers
SDRAM, DRAM Modules, NAND Flash, NOR Flash, Solid State Drives, Phase Change Memory
DL
CCFL Backlight Controllers, CCFL Backlight Inverters (Single, Dual, Quad)
PS
DC/DC Converters, AC/DC Power Supplies, Digital Panel Meters, Magnetics, Data Acquisition
LP AC/DC Power Supplies, DC/DC Power Supplies
SDRAM Components (SDR, DDR, DDR2, DDR3), Mobile DRAM (LPSDR, LPDDR, LPDDR2), DDR3 SDRAM Modules
DMonochrome and Color LCDs (Resolution - QVGA to SGXGA, Size - 2.7” to 21.3”)
SBluetooth Low Energy ICs, Single Chip ANT ICs, 2.4 GHz RF ICs, Sub 1 GHz RF ICs
SAudio/Speech, Telecommunications, Microcontrollers, Bus Interface, Power Management, I/O
S Analog and CMOS Image Sensors
L LED Light Engines
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
Nu-Horizons-Electronics-Americas-Linecard-Winter-2013.indd 5 1/15/2013 4:00:09 PM
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
DOLED/PMOLED Displays, TFT/AMLCD Displays, STN/PMLCD Displays
SPCI Express, USB, Signal Conditions, Timing, Switching, Connectivity, Power Management
D EPD (E-Paper Display)
D Sunlight Readable, Low Power Displays
S Clock Oscillators, TCXO, VCXO, OCXO, Crystals
DActive Display Cables, Passive Display Cables, EL Display Cables, Inverter Input Cables
DE T E C H N O L O G Y I N C .
Enclosed Units, Display Modules, Controller Boards
SL 802.11 Wi-Fi Chipsets and Modules
SMCU & MPU, ASSP, Display Modules, Discretes, Standard ICs, Memory
SLWireless RF Transmitter, Receiver and Transceiver Modules
L
LED Modules/Arrays, LED Tube, Outdoor Lighting, BLU, Automotive, Middle Power LEDs, High Power LEDs, Flash LEDs
S Crystals & Oscillators
SDiodes, Bi-polar and MOSFET Transistors for High Reliability Applications
S
Power Management, ESD Protection, Timing and Synchronization, Optical Transport Equipment (SerDes), HiRel MIL, Low-Power RF, Digital Sensor/Signal Conditioning ICs (also see Gennum)
DLS
LCDs, Lighting, Memory, Optolectronics, Power Devices
S WirelessHD, HDMI, MHL, DVI, Storage, Video Processors
S Mobile Storage, Multimedia SoCs, Mobile Communications
LS
Analog, MEMs, Power, Automotive, Entertainment, Connectivity, Microcontrollers, Memory
SL High Performance Storage & I/O Connectivity products
LS
LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs
P DC/DC Power Converters, EMI Filters, AC/DC Power Supplies
LS
AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test
D
Passive Color LCD Modules, Active Color LCD Modules, Graphic Type Monochrome LCD Modules, Character Type Monochrome LCD Modules
DCapacitive Touch Screens, Resistive Sensors, Glass Filter Products
DProjected Capacitive Touch, Monitors, Displays, Embedded Solutions
SMobile RAM, Specialty DRAM, Graphics DRAM, Flash Memory
STransformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components
P AC/DC Power Supplies, DC/DC Power Supplies
Nu-Horizons-Electronics-Americas-Linecard-Winter-2013.indd 6 1/15/2013 4:00:13 PM
34
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
35
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
AMERICAS SUPPLIER LISTING
D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
S Mobile Storage, Multimedia SoCs, Mobile Communications
LS
Analog, MEMs, Power, Automotive, Entertainment, Connectivity, Microcontrollers, Memory
SL High Performance Storage & I/O Connectivity products
LS
LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs
P DC/DC Power Converters, EMI Filters, AC/DC Power Supplies
LS
AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test
D
Passive Color LCD Modules, Active Color LCD Modules, Graphic Type Monochrome LCD Modules, Character Type Monochrome LCD Modules
DCapacitive Touch Screens, Resistive Sensors, Glass Filter Products
DProjected Capacitive Touch, Monitors, Displays, Embedded Solutions
SMobile RAM, Specialty DRAM, Graphics DRAM, Flash Memory
STransformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components
P AC/DC Power Supplies, DC/DC Power Supplies
SEMICONDUCTORS / POWER | SUPPLIERS BY PRODUCT CATEGORY
E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level
S U P P L I E R N A M E S Audi
o / V
ideo
Bus
Inte
rfac
e
Conv
erte
rs
Data
com
Disk
/ In
terf
ace
Logi
c
Mem
ory
Opto
elec
tron
ics
Phys
ical
Lay
er
Pow
er &
Bat
tery
Man
agem
ent
Pow
er S
uppl
ies
Proc
esso
r
Sens
or &
Imag
ing
Arra
ys
Sign
al C
ondi
tioni
ng
Syst
em M
onito
ring
Tele
com
Tim
ing
Wire
less
Active -Semi
Adesto Technologies
AKM Semiconductor
Allegro MicroSystems
Anadigm
Atmel
California Eastern Laboratories (CEL)
Conexant
Digi
Emerson Network Power
Exar
Excelsys Technologies
Finisar
GE Energy (formerly Lineage Power)
Gennum (SemTech)
Integrated Silicon Solution, Inc. (ISSI)
IXYS (includes Clare)
Lapis Semiconductor (formerly OKI Semi)
Lattice Semiconductor
LHV Power
Linear Technology
Magnum Semiconductor
Marvell
Mean Well
Micrel
Microchip (includes SMSC)
Micron
Murata Power Solutions
N2Power
Nanya Technology Corporation
Nordic Semiconductor
Nuvoton
OmniVision
Pericom
Pletronics (PLE)
Renesas
Samsung LED
SaRonix-eCera
Semicoa
Semtech (includes Gennum)
Sharp Microelectronics of the Americas
Silicon Image
Silicon Motion
STMicroelectronics
Supertex
SynQor
Winbond
Telefunken Semiconductors
Würth Midcom
Zippy
Nu-Horizons-Electronics-Americas-Linecard-Winter-2013.indd 7 1/15/2013 4:00:14 PM
SEMICONDUCTORS / POWER | SUPPLIERS BY PRODUCT CATEGORY
LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.
Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.
In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a suffi cient level of detail to provide the designer with relevant information to proceed quickly and easily from start to fi nish.
Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.
www.nuhorizons.com/labcam
www.nuhorizons.com/seminars
www.nuhorizons.com/appnoteswww.nuhorizons.com/appnotes
Application Notes
DevelopmentTools
www.nuhorizons.com/devtoolswww.nuhorizons.com/devtoolswww.nuhorizons.com/devtoolswww.nuhorizons.com/devtools
Portal is a quarterly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notifi ed of upcoming issues or to request samples of the products found inside.
www.nuhorizons.com/portal
Enhance Your Design...WITH NU HORIZONS EDUCATION AND DEVELOPMENT SOLUTIONS
facebook.com/nuhorizonselectronics
twitter.com/nuhorizons
linkedin.com/in/nuhorizons
youtube.com/nuhorizonsvideo