NSN BSS O & M Training Program
-
Upload
gauravswami -
Category
Documents
-
view
27 -
download
1
Transcript of NSN BSS O & M Training Program
-
NSN BSS Operations & Maintenance Training Program
Duration: 5 days
Course Content:
Day 1
09:30 AM to 12:15 AM
GSM System Architecture
Signalling protocols and interfaces
GSM Security and Encryption methodologies
12:30 PM to 02:30 PM Nodes and functionalities
NSN specific RAN nodes overview
03:30 PM to 05:30 PM
GSM Logical Channels overview
GPRS and EDGE description
Call flow MO/MT
Day 2
09:30 AM to 10:30 AM NSN 2G BTS Hardware and functionality (Flexi & Ultra)
10:30 AM to 12:00 PM NSN BSC hardware units and functionality
12:30 PM to 02:30 PM
NSS BSS logical and physical connectivity
Flexi and Ultra BTS integration and commissioning step
by step
03:30 PM to 05:30 PM BSC3i Integration (A, Abis and Ater link)
Types of Channel mapping to TRX
Day 3
09:30 AM to 11:30 AM NSN BTS O&M
11:45 AM to 01:00 PM
Different configuration in Flexi and Ultra BTS sites
BTS site elements and standards
Traffic dependent BTS configurations
01:00 PM to 02:30 PM BSS Alarms and fault rectification
03:30 PM to 05:30 PM BTS and BSC specific parameters and there impact
Common KPIs to be monitored for voice and data calls.
-
Day 4
09:30 AM to 11:30 AM BSS RAN KPI and counters
11:45 AM to 02:30 PM Steps to improve the network KPI
Common issues in GSM network and steps to resolve
03:30 PM to 04:30 PM BSC and BTS health check steps
04:30 PM to 05:30 PM Frequency and cell planning concepts
Day 5
09:30 AM to 12:30 AM BSS RAN KPI analysis
01:00 PM to 02:30 PM
GPRS and EDGE related faults and rectification
Gb over Frame relay and IP concept
Mobility management and case analysis
03:30 PM to 04:30 PM NSN BSC and BTS faults and rectification
04:30 PM to 05:30 PM Question and Answer